App-V 5: Error encountered while executing command Mount-AppvClientPackage

I am getting this error in which no Google search reveals anyone else as having reported it anywhere.  In fact, after having posted this, it was the only search result that came up with either of these two event ID's or errors.
I am trying to sequence an in house application. It's a manual install. The application runs perfectly prior to creating the package so I am not sure what this "specified file" is that it can't find.  It says to refer to the AppV Client Event
Log for more details. This event was *IN* the AppV Client Event Log and there was another event along side it.
Event ID 9001
Error encountered while executing command Mount-AppvClientPackage -PackageId eb77be98-bc44-45fd-a0e5-95e0c315808b -VersionId c5013ec7-0456-401b-b99e-d988d97bfa55. Error: Application Virtualization Service failed to complete requested operation. 
Operation attempted: Mount Package. 
Windows Error: 0x80070002 - The system cannot find the file specified
Error module: Streaming Manager. Internal error detail: 74F0262C80070002. 
Please consult AppV Client Event Log for more details.
Event ID 14016
The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
because the network connection has been lost or is unavailable.  Check your network connection and try again.
The network connection is still quite alive on the client and the firewall is disabled on the App-V server. I can still reach and view the xml file when browsing to the web service on the App-V server.  I can also run Sync-AppVPublishingServer from
powershell without error.
For more inside info on the app: 
1. It is a manual install. A directory is simply copied to the hard drive manually.
2. An ocx file gets registered from the Syswow64 directory.
3. MySQL 5.1.13 client is installed.
4. Shortcuts are created.
5. A system DSN is created using C:\Windows\SysWOW64\odbcad32.exe
6. The app runs perfectly on the sequencer prior to creating and publishing.
UPDATE:
Get-AppVClientPackage reveals this:
PackageId            : eb77be98-bc44-45fd-a0e5-95e0c315808b
VersionId            : c5013ec7-0456-401b-b99e-d988d97bfa55
Name                 : Tietan
Version              : 0.0.0.1
Path                 : \\wuspappv01\appv1\TietanProd\Tietan.appv
IsPublishedToUser    : True
UserPending          : False
IsPublishedGlobally  : False
GlobalPending        : False
InUse                : False
InUseByCurrentUser   : False
PackageSize          : 217155655
PercentLoaded        : 0
IsLoading            : False
HasAssetIntelligence : True
The path is accessible from the client server. I can see the file. It's there.

Hello,
If you execute get-appvclientpackage
And then check what is the value for Path for the package you have an issue with.
Most likely the error message means that the file in Path isn't reachable.
As indicated here;
The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
because the network connection has been lost or is unavailable.  Check your network connection and try again.
Nicke Källén | The Knack| Twitter:
@Znackattack

Similar Messages

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'

    Hi Experts....
    I am facing a weired error when connecting to Exchange On-Premises...
    I have 2 virtual machines in Virtual-Box .On 1st machine I has installed Active Directory..
    On 2nd machine I have to install Exchange Server.I have joined the second machine in the domain.
    After Installing all the pre-requisites and updates for Exchange when I open the exchange management console I faced the following error....
    Initialization Failed
    The following error occurred when retreiving user information for 'ABC\Administrator':
    Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'
    Click here to Retry
    Can anyone help me in this regard....!!!!
    Thank You...!!!!

    Hi,
    From the error description, I recommend open C:\Program Files\Microsoft\Exchange Server\V14\RemoteScripts, check the ConsoleInitialize.ps1 file, find "function global:Get-LinkedRoleGroupForLogonUser()", here is the right file of this part for your reference.
    foreach ($sid in $sids)
             try
               $accountName = $sid.Translate([System.Security.Principal.NTAccount]).Value
             catch
               continue
             if ($accountName -ne $null)
               foreach ($roleGroup in $allLinkedRoleGroups)
                 if ([string]::Compare($roleGroup.LinkedGroup,$accountName,$True) -eq 0)
                   $roleGroup
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Error encountered while executing the transform

    My message failed at orchestration with the following error. Kindly help in finding the issue.
    xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
    Shape name: CodecoMapping
    ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
    Exception thrown from: segment 1, progress 22
    Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
    Exception type: XTransformationFailureException
    Source: Microsoft.XLANGs.Engine
    Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
    The following is a stack trace that identifies the location where the exception occured
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
       at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
       at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
       at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
    Additional error information:
            Exception has been thrown by the target of an invocation.
    Exception type: TargetInvocationException
    Source: mscorlib
    Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
    The following is a stack trace that identifies the location where the exception occured
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
    Additional error information:
            Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
    Exception type: XslTransformException
    Source: System.Data.SqlXml
    Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
    The following is a stack trace that identifies the location where the exception occured
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
       at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
    String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
       at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
       at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

    Hi,
    It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
    "Exception has been thrown by the target of an invocation" is a very generic exception. you
    need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
    http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to debug  a run time error encountered while executing ZFunction Module

    Hi all,
    My requirement is to create a ZFunction Module that Generated a sales order
    for multiple line items and works for both Variant Configurable material and a Normal Material.
    I am using BAPI_SLSTRANSACT_CREATEMULTI in my Zfunction Module to create a
    Sales order
    My ZFunction Module works well if I give normal material as input.
    It also works well and generates a sales order if I give all Variant Configurable materials as input.
    But if I give both Variant Configurable material and a normal material it throws a run time error.
    Can some one tell me what is wrong? can some one suggest me how to debug this run time error
    Termination occurred in the ABAP program "SAPLCRM_CONFIG_OW" - in                            
    "CONFIG_TO_CBASE".                                                                          
    The main program was "RS_TESTFRAME_CALL ".                                                                               
    In the source code you have the termination point in line 63
    of the (Include) program "LCRM_CONFIG_OWF02".                                                
    Source Code Extract                                                                               
    Line SourceCde                                                                               
    |   33|                                       LT_CUXI_CUPRT                                       
    |   34|                                       LT_CUXI_CUVAL                                       
    |   35|                                       LT_CUXI_CUVK                                        
    |   36|                                       LS_CUXI_CUCFG.                                      
    37
    |   38|  PERFORM CREATE_PRICING_CSTIC USING IS_CONFIG-CUCFG-CFGINFO.                              
    39
    |   40|* set config to cbase                                                                      
    |   41|  CALL FUNCTION 'COM_CUXI_SET_SINGLE_CFG'                                                  
    |   42|       EXPORTING                                                                           
    |   43|            I_CFG_HEADER          = LS_CUXI_CUCFG                                          
    |   44|            I_ROOT_INSTANCE       = CV_INT_OBJ_NO                                          
    |   45|            I_LOGSYS              = LV_LOGSYS                                              
    |   46|       IMPORTING                                                                           
    |   47|            E_ROOT_INSTANCE       = CV_INT_OBJ_NO                                          
    |   48|       TABLES                                                                               
    |   49|            I_TAB_INSTANCES       = LT_CUXI_CUINS                                          
    |   50|            I_TAB_PART_OF         = LT_CUXI_CUPRT                                          
    |   51|            I_TAB_VALUES          = LT_CUXI_CUVAL                                          
    |   52|            I_TAB_VAR_KEYS        = LT_CUXI_CUVK                                           
    |   53|            I_TAB_RESTRICTIONS    = LT_CUXI_CURES                                          
    |   54|       EXCEPTIONS                                                                          
    |   55|            INVALID_INSTANCE      = 1                                                      
    |   56|            INTERNAL_ERROR        = 2                                                     
    57
    OTHERS                = 3.                                                        58
    |   59|  IF SY-SUBRC <> 0.                                                        
    |   60|    if sy-msgno is initial.                                                      
    |   61|      MESSAGE X010 WITH 'COM_CUXI_SET_SINGLE_CFG'.
    |   62|    else.                                                                             
    |>>>>>|      MESSAGE ID SY-MSGID TYPE 'X' NUMBER SY-MSGNO
    |   64|              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    |   65|    endif.                                                                               
    |   66|  ENDIF.                                                                               
    67
    |   68|ENDFORM.                               " CONFIG_TO_CBASE                                   

    Hey Amit...
    Can I Create a Sales order for VC and Non VC items using BAPI_SLSTRANSACT_CREATEMULTI
    Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI
    I am trying to create a Sales Order using a Zprogram. I have used BAPI_SLSTRANSACT_CREATEMULTI. If I give the input as Normal material I am able to generate a sale order. If I give the input as VC material I am able to generate a sales order. But if I give both VC and Normal material as input, I get a run time error as follows.
    Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI that we cannot create a sales order with both VC and Non-VC items or am I missing some data which I need to pass when I give both VC and Non VC items? I get this error only for my Zprogram. But if I try to create an order on screen manually I donu2019t get any error. This happens only if I create an order with my Zprogram.
    Some one please help me u2026I am just stuggling to get this doneu2026
    I dint find any posts that gives me information about this error.
    CUX1 034 u201CNo root instance found in header datau201D                                                                               
    In the source code you have the termination point in line 63                                   of the (Include) program "LCRM_CONFIG_OWF02".

  • BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

    HI,
    I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
    Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
    "ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
    [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
    Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
    to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
    object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
    name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
    or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
    SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
    verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
    has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
    other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
    look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) 
     at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
    Boolean asyncClose)   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)   at
    System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
    sendToPipe, Int32 timeout, Boolean asyncWrite)   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText)   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
    cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction)   --- End of inner exception stack trace ---   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
    Transaction transaction)   at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc)   at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc)   at
    Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation)   at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation)   at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() 
     --- End of inner exception stack trace ---   at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand() 
     at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

    Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
    Please review your BAM Definitons.
    Regards.

  • RMAN-00558: error encountered while parsing input commands

    Hi,
    on 12C on Win 2008
    as said in documentation :
    @ (at sign)
    Example 2-2 Running a Command File Within RMAN
    This example shows how you can execute a command file from the RMAN prompt and from within a RUN command. User-entered text appears in bold.
    RMAN> @backup_db.rman
    I do as follows to run a script to back up :
    RMAN> @C:\scripts\RMAN\al_backup_full_cdb.rman LOG=C:\scripts\logs\al_backup_full_log
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "log": expecting one of: "double-quoted-string, identifier, integer, single-quoted-string"
    RMAN-01007: at line 1 column 1 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "@": expecting one of: "double-quoted-string, identifier, integer, single-quoted-string"
    RMAN-01007: at line 0 column 1 file: standard input
    Thank you.

    user10274093 wrote:
    yes thank you. Like this :
    @C:\scripts\RMAN\al_backup_full_cdb.rman
    But how to have a log file ?
    You can not use the log= clause *inside* rman, you can only use it on the shell prompt *outside* rman.

  • Diadem runtime error while executing command "SchemeMeasStar"

    Hello:
    I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
    -Error- DIAdem
    Runtime Error While Executing Command "SchemeMeasStar"
    Error Type: UNKNOWN
    Error Address:00001720
    Module Name:GFSBase.Dll
    Would you like to give me some suggestions?
    thanks very much
    jing

    Dear MarcusP:
    Thank you very much.
    your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
    Thank you very much.
    yours
    Jing
    Attachments:
    DIAdem_Error.doc ‏305 KB

  • [0098]SQL*Plus encountered oracle error 100 while executing SQL Statement

    Hi,
    i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
    :[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
    can anybody please help? below is the script.
    DECLARE
    --CURSOR FOR DUPLICATE ROWS
    CURSOR CUR_DUPLICATE_ROWS IS
    Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
    group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
    var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
    BEGIN
    FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
    LOOP
    delete from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
    and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
    and rowid not in (select max(rowid) from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
    commit;
    END LOOP;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    NULL;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE(SQLERRM);
    ROLLBACK;
    END;

    Try this:
    delete party_note
    where  rowid not in (select max(rowid)
                         from   party_note
                         group  by rms_note_id, rms_summary_note_id
    commit;No need for cursors and loops.
    And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again.

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • ORA-01423: error encountered while checking for extra rows in exact fetch

    ERROR at line 1:
    ORA-01423: error encountered while checking for extra rows in exact fetch
    ORA-01722: invalid number
    ORA-06512: at "Department.get_emp_name", line 57
    ORA-06512: at line 14
    Hi
    The above are the error messages I am running into and I am not sure what it means at all. I do have a query which select few rows into cursor
    cursor c_requested is
    select * from departments where emp_id in (1, 2, 3)
    now from these rows I again creating a query dynamically
    open c_requested;
    loop
    fetch c_requested into deptID, name, authorized; -- declared variables
    exit when c_requested%NotFound;
    sqlstring := 'Select name from employees where deptID = ' || deptID || ' and Authorized = ' || authorized;
    begin
    execute immediate sqlstring into description; -- declared variable
    exit;
    exception when no_data_found then
    description := 'FILTER_OUT';
    end;
    end loop;
    close c_requested;
    This code is inside a function get_emp_name(). When I execute this function I am getting the above errors. I really appreciate all your help. Please let me know if you need more information.
    Thank you very much

    Thank you very much damorgan,
    I looked through my code and figured out what was wrong. I had a varchar2 column in the table where I was passing a value 999 instead of '999'. Thanks again.
    I have one more question. I am using cursor to loop through.. here is my code
    rowcount integer;
    cursor c_emp is
    select * from employees where empID in (....);
    begin
    open c_emp;
    rowcount := c_emp%RowCount;
    loop
    end loop;
    dbms_output.put_line(rowcount);
    end;
    I am getting rowcount = 0 even though there are many values in it. I am not sure if I am using the where clause properly. Any help would be appreciated.
    thank you.

  • Installer "error encountered while writing receipt"

    I'm running off 10.4.10, and have been trying to install updates for months now, unsuccessfully. When I try to install off of the automatic updating system, it simply tells me the installation has failed and to try again later. When I download updates seperately and check the log, I find that there was an "error encountered while writing receipt". There is no respective receipt in the Receipts folder. I've tried installing right after a reboot, repairing disk permissions, and searching through support help for hours.
    Also, I'm not sure if this is related or not, but iTunes has gone blank after starting up a few times over the past several months, telling me that the Library is damaged.
    Please help!
    Thanks,
    AMC

    HI AMC20 and welcome to Apple Discussions ...
    Let's take this one issue at a time.
    Locate this file: com.apple.SoftwareUpdate.plist It's here: /Users/YourName/Library/Preferences. Drag that file from the preferences folder to the trash, empty the trash and reboot. Go to the Apple logo top left in your Desktop and then click Software Update. If Software Update fails... we need to go further.
    See how much available drive space there is. Select your MacintoshHD icon on your Desktop, then Command + I, which will prompt the Get Info window. Click the General tab so the arrow faces down. Look where it says; Available and Capacity Try not to allow your available drive space to fall below 15% of the capacity. Software Update cannot download and update software without enough space.
    As for iTunes... go here to learn how to recreate your iTunes Library:
    http://support.apple.com/kb/HT1451 < recreate iTunes Library
    If you continue to have problems, you might want to do an Archive & Install or Erase & Install:
    Reinstalling Mac OS X
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    Click Options. If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings." If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
    Click Continue.
    Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
    If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
    For more information, visit the Mac OS X Install and Upgrade Support website at www.apple.com/support/tiger/install/.
    Carolyn

  • Signal 4 error encountered while running a customized report

    Signal 4 error encountered while running a customized report
    We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
    Can anybody tell the possible causes of signal 4 errors and their remidies ?

    Thank you for the link, i will read it...
    I have problemss with PDF output...
    When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    Spawned Process 499776
    stat_low =84
    stat_high = 0
    emsg:was terminated by signal 4
    Program was terminated by signal 4
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

Maybe you are looking for