App wiped all other apps and data
Today I opened The Weather Channel app when my phone flickered and suddenly all of my other apps were gone along with the data. When I tried to do a restore, it shows the last back up as of 6/24/10 which is prior to getting my iphone 4. However, every time I sync, it says "creating a backup." Is there a secret place to locate the back up from Friday evening to try and recover my data? HELP!!!!!
Install the original installation CD and hold down the C key with the disk installed.
Proceed with the installation until you get to the menu bar. Select UTILITIES and from the drop down menu Select DICK UTILITY
In DISK UTILITY, select ERASE and erase the drive (use Mac OS Extended (Journaled).
Proceed with the installation of the Snow Leopard OS.
When done, select Software update from the icon drop down menu on the menu bar and update to 10.6.8.
Then upgrade to Mt Lion.
ciao.
Similar Messages
-
I have 2 apple id's with different apps and data saved under each. It's very annoying so now I want to create a new id with my primary email address I use now. If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?
Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621 -
how do i get all my data and info from my old iphone onto my new one without access to the original itunes that i set my first iphone up on? my partners itunes keeps telling me that its going to replace all my apps and data with his stuff
ok so i have my own i tunes library - how do i get all my old apps onto my new library?
-
How do I setup my devices with a new computer without losing all my apps and data?
How do I setup my devices with a new computer without losing all my apps and data on my devices?
Move your iTunes library to a new computer. See these links for instructions:
http://support.apple.com/kb/HT1660
http://support.apple.com/kb/HT1589 -
I had an Ipad 1. I just bought an Ipad3. How do I transfer all my apps and data from my Ipad1 to Ipad 3?
See Here > http://support.apple.com/kb/HT2109
-
HT204053 Can create a new icloud account on my iphone and keep all my apps and data?
would like to create a new icloud account but keep all apps and data on my iphone from other account has anybody done that?
You can not transfer apps (or any other item except data) from one account to another, you will need to use the old account in order to update anything bought or downloaded from it.
For the data just save it all back to your Mac and then migrate it to the new account. -
Using ios6 on my iPad I can no longer swipe to hide an app in the App Store. Still works on all other ios and devices. Anyone find the same?
The feature no longer works in iOS 6 so you must not have updated your other devices yet.
-
I am having a great deal of trouble with the upgrade to ios 7 on my 4S. The syncing and the software updates always leave generic icon apps that I have downloaded in the past but have deleted from my phone. But they keep reappearing. A restart of the phone fixes the icons but they are loaded not at the last page of the home screen but on completely random pages, screwing up my app and folder layout.
I want to completely wipe the phone and restore the apps one by one, but I am concerned about whether the data and documents for those apps that I reinstall will be intact. Does the syncing for the apps on the phone retrieve the data from the last backup on the computer? If so, does it only sync the apps on the phone or does it try and reinstall all the apps that there is data for in the backup? In other words, does the resulting set of apps and data reflect the current state of the phone or the saved state of the backup?Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.
-
i have an iPad with apps and data already on it i just bought a mac how do i transfer the data from i pad to mac
here
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finish backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources. -
Ios 6.1.3 upgrade deleted apps and data
Hi
The upgrade to ios 6.1.3 has removed apps and data from my iPad 2.
The iPad had been previously connected to a Win 7 PC with iTunes backing up and running fine.
I connected it to a new Mac and new iTunes as the old Win 7 PC was removed and I did a manual backup of it in it's current state and did not clear or sync the iPad (e.g. I did not sync iTunes to replace contacts or photos etc).
The upgrade to 6.1.3 from 6.1 came up on the Mac and I approved it in iTunes on the Mac and the process started ... silly me ... what was I thinking ...
During the restart of the iPad it froze and I had to power cycle the iPad (I don't know if this has any significance).
When the iPad finished the ios upgrade it was missing MY apps and data (e.g. mindmap app with maps, note taking app with years of notes, photos, videos etc) and has just the apps that come with the iPad installed.
I chose to do a "restore backup" to the backup that the ios upgrade made at the ios upgrade - it gave me the same result.
I chose to do a "restore backup" from the manual backup I mentioned I did days before the ios upgrade - the same result.
I now have an iPad without my apps and data and photos and videos and I'm screwed .... (and incredibly annoyed).
Apart from slitting my wrists after sending Apple flame mail what other courses of action can people suggest?This problem has nothing to do with updating to iOS 6.1.3.
It was caused by connecting your iPad to a new iTunes to which it had never been synched with. This will clear the iPad of all its content. There are warnings that this will happen.
Although there are ways to move an iPad to a new iTunes without losing anything that won't help you much now. At this point you can restore your Apps at no charge but your data is gone unless you can find a backup file on your old PC from which you could restore your ipad. -
How to migrate iPhone apps and data to another apple ID
OK, Hopefully someone can help me out with this situation: I have had my daughter's iPhone associated with my Apple ID for several years now because A) She was too young to have an Apple ID of her own, and B) I wanted to be able to monitor her App Store purchases and such. Well now that she is older and has proven herself to be a responsible young lady, I want to get her her own Apple ID, as she will be getting a new McBook as a graduation present. My question is this: Is it possible to migrate all the apps and data from her phone to a new Apple ID without having to download all those apps again? I backup her phone to my computer on a regular basis. Any help is appreciated.
hold on a second. i went thru the same situation with my daughter, almost exactly as she got a new macbook pro and a new iphone 4. she had an ipod touch 4g that she synced to my macbook pro and apple id for apps. with wjosten's (the guy who wrote the article randers4 linked) help we transferred purchases from her ipod touch to her new itunes on her new macbook with her new apple id. except for those apps that she already had she started all fresh. i figured at some point she'll be moving out and off to college or whatever so might as well start all fresh but she didn't want to lose data she had on some of the old apps. the only issue is when there is an update for the old apps on her new macbook pro i have to sign in on my apple id to update them. i don't know if this info will be of any help or not, but just throwing it out there.
-
Can I restore settings, apps and data from an external hard drive to new Macbook Pro?
I recently lost my Macbook Pro to water damage. It was about 3 years old and tuned for comfort. Unfortunately, my most recent backup is at least 3 months old. I purchased a new MacBook Pro and I'm wondering what my options are for migrating my settings, apps and data from the old hard drive to the new MacBook Pro? I have a USB drive bay that I plan to attach to the new MBP to gain access to the old hard drive. Someone suggested Migration Assistant but my research hasn't turned up any information about migrating data from an external drive.
Any help would be greatly appreciated.THANKS! I guess my research wasn't THAT thorough. I booted with the external drive attached and setup immediately gave me the option to setup using Migration Assistant. It was a little slow via USB (2+ hours) but it was nothing compared to the time it would have taken to do it manually. My new 15" MBP looks exactly like my old 13" MBP. AWESOME!!!
Thanks again! -
After restart or power off and on. total recent apps and data(call,sms history) loosing.
i am using BlackBerry Z10 with 10.3.1. OS. 2-3 times i was tried. when ever i restart my Mobile, i am loosing recent apps and data like call and sms history.
eg. today is 25th Apr 2015. today i was restarted my mobile. after restart data and apps are available which ever i was installed before 3rd Apr 2015.
after 3rd Apr 2015, no call or sms history and apps are not there in my mobile.
this same thing was happened from last 2-3times.
so please do needful for me.To help me better understand I was wondering if each of you can complete the following?
Go to KB36747 and download BlackBerryFix.zip
Run the tool and confirm that it says ‘The fix is not applicable to this device’
Assuming the tool states the fix was not applied, please complete the following test:
Make and receive 2 or 3 phone calls
Press the Power/Lock key followed by tapping Restart
When the device restarts do you see a blue LED?
After the device restarts, check the Hub and Phone app to identify if the calls made and received during step 1 still appear. Should this calls be missing, please capture logs using the steps below.
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
After completing these steps, using File Manager on your device go to Documents folder by Logs.
Tap and hold the log file (i.e. bbswltLog-<date>.zip) followed by tapping Share and send it via email to supportforums{at}blackberry.com.
If I can ask, what other type of data disappears? If you create a document using Docs to Go and save it to your device memory, does restarting your device result in document being removed from your device?
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog -
HT1386 how to backup my apps and data before update to iOS5
how to backup my apps and data before update to iOS5
When you update, iTunes will backup your iOS device. You can also do it manually... http://support.apple.com/kb/ht1766
-
Hi all, I have a requirement where I need to find all intersections of children of currency dimensions and currentmembers of all other dimension wherever data exists for them.
Its a ASO cube with and version is 11.1.2.2.
If I try to write the formula in a the below way to test, I get an error that 'Currenttuple can only be used with a named set'. But when I try to create a named set with the 'WITH' keyword, it not able to recognize the 'WITH' keyword. I think I am missing something obvious and this may not be the correct way to achieve this. Please help.
1st try with just Currenttuple - error 'Currenttuple can only be used with a named set'
iif(
(isgeneration([Time].currentmember,4)),
CASE
WHEN NOT ISEMPTY(
Crossjoin([Currency].Children,
{([Time].currentmember,[Org].currentmember,
[S Org].currentmember,[C Code].currentmember,
).Currenttuple
THEN Missing
ELSE Missing
END, Missing)
2nd try to create a named set with 'WITH' keyword - syntax error at WITH
/*with set [NewSet] as
'Crossjoin([TC].Children,
{([Fiscal].currentmember,[Organization].currentmember,
[Sales Org].currentmember,[Company Code].currentmember,
[Measures].currentmember,
[Product].currentmember,
[Channel].currentmember,
[Order Reason].currentmember,
[Country].currentmember,
[Billing Type].currentmember,
[Business Area].currentmember,
[Sales District].currentmember,
[Data Source].currentmember,
[View N/A]
iif(
(isgeneration([Fiscal].currentmember,4)),
Filter([NewSet], NOT IsEmpty([NewSet].CurrentTuple))
, Missing)Hi Tim,
Thanks for you reply and sorry for my delayed response. Actually there is one more requirement in this, which makes it a bit complicated. There are another set of members in the Measure dim called FXDirrate and FXIndrate. The logic is :
1. If data exists for the combination of a Currency.children, FXDirrate and current member of all other dims
then convert the value for Currency.children by diving by FXDirrate
2. If data exists for the combination of a Currency.children, FXIndrate and current member of all other dims
then convert the value for Currency.children by multiplying by FXIndrate
3. Then value of the calculated members will be sum(all FXDirrate converted + all FXIndrate)
Currency does roll up but as the data for its children can either be in Dirrate or Indrate and the sum needs to be taken after the conversion, there I am not able to proceed as I am not able to check the existence of data in individual children of currency as Isempty isn't working on a set . Thanks a lot for your help. -
I am now running on OS X Snow Leopard. If I upgrade to Mountain Lion, will all my files and data and bought programs disappear?
As Austin Kinsella1 says, it's a good idea to check your program versions.
I have found this site really helpful with that:
http://roaringapps.com/apps:table
Maybe you are looking for
-
SharePoint Foundation 2010 Search returns no results
Hi, SharePoint foundation 2010 Search is not showing any results after configuring the step from the below link. http://wiki.sirkit.ca/2011/04/sharepoint-foundation-2010-search-returns-no-results/ My Server Setup : SharePoint Foundation 2010 SQL Ser
-
PDF created from PowerPoint causes SLOW flattening during printing
Windows 7 64 bit. Printing to a Xerox ColorQube 9201. I've seen another thread like this, but there was no answer.
-
Hi team, I was referring the below statement to understand the control cycle. The Kanban Control Cycle business object is used to control the flow of information and material between the demand source and the supply source in a pull environment. It c
-
Firefox won't load any web pages but my other browser will
i updated to firefox beta. It ran for one day. Since then it loads a blank white page and won't go to any web sites. I don't get an error message or anything. It just sits there.
-
Bridge does not keep LR settings?
If I am understanding this correctly, Bridge is not able to read LR adjustments? Thats kind of annoying.