Append 'init=/bin/systemd' to kernel command line
I have just updated my Arch_64bit and have been adviced by Pacman to ":: Append 'init=/bin/systemd' to your kernel command line in your bootloader to replace sysvinit with systemd".
I dual boot Ubuntu and Arch and use the GRUB2 from Ubuntu. I have installed Arch's Grub to its own partition.
However there is no /etc/default/grub in my File System instead there is /boot/grub/menu.lst... mine is a recent Arch install and I wonder how I ended up with Grub1.
In /etc/default/grub I would have edited: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash init=/bin/systemd". I have no idea how to deal with Grub1 /boot/grub/menu.lst.
Pointers will be helpful.
Also, why do I need to append 'init=/bin/systemd' to the kernel command line? Without doing so my Arch is booting and working fine. So far I haven't encountered any issues I can tell with my current Arch, the way it is.
Do I need really need to append the above to my Kernel command line?
Thanks
fantab wrote:
I have just updated my Arch_64bit and have been adviced by Pacman to ":: Append 'init=/bin/systemd' to your kernel command line in your bootloader to replace sysvinit with systemd".
I dual boot Ubuntu and Arch and use the GRUB2 from Ubuntu. I have installed Arch's Grub to its own partition.
Thanks Jason, (and thanks for the quote I use as signature)
However, it turns out that I may NOT have installed GRUB during Arch install... 'coz there are no 'stage' files in the /boot/grub there is just menu.lst and also because mine is only a few months old Arch install.
#pacman -SS does not show GRUB as installed. So I did not install it.
So how do I go about it? Do I have Install GRUB now to "append 'init=/bin/systemd' to kernel command line"?
Similar Messages
-
Gummiboot and Kernel command line
Hi
I trying to change the mouse pulling rate to 2 ms using the Arch-wiki for “Mouse Polling Rate” and "gummiboot"
Before I used grub-legacy on a old pc and it worked fine adding
usbhid.mousepoll=2 to the kernel command line
however with gummiboot it does not work ?
/boot/loader/enties/Arch.conf
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sdb2 rw usbhid.mousepoll=2
Is there a way to get the command line working ?The kernel command line works just fine if the machine boots.
I think you should try using the /etc/modprobe.d method, as that is the other way that module options can be specified.
The way I see it, this way seems more appropriate for things like what you are trying to do. The kernel command line I think should be used for built-in things, like acpi. Though some things need to be specified on the kernel command line in order to make them actually work. For example, the libahci module is set up to spin up drives one at a time in some kind of an attempt to efficiently use power. So of course if you set this in /etc/modprobe.d, by the the time it gets to this setting, it will already be done, so you would use libahci.ignore_sss=1 on the kernel command line.
For more info, see the modprobe.d and modprobe man pages. -
EFIstub, kernel command line parameters
Hello,
I read this post and this post, so I'd like to know about the kernel option to load the command line from a file, rather than write it direclty to the NVRAM, the so-called linux.conf, that should reside in the same kernel path.
Is there with the current kernel, or should I patch it?
What would it be, then, the kernel's command line option to use it?Point 1, I have one scarcely used,
Point 2, maybe I should write the config in a file and tell efibootmgr to load from there. That would avoid keep track of may changes. Reading from NVRAM comes hard, due to the zero spacing (or unicoding) of its content.
On top of the topic, that means there is no kernel yet, which will load command parameters from a file, isn't it?
Probably it is possible, but I should do it on my own as this mentions. -
How to upde userid to uid=0 using command line?
Hi all,
I made a new user "sysadmin" by typing at root command line:
# useradd sysadmin (all default profile values)
What is the command (line) to update its UID to "0"?
Thanks you very much in advance.
Ms KKIn general, having multiple accounts with the same UID is a bad idea. To have
multiple "root" accounts is very, very bad idea.
If you need an ordinary mortal user to be able to execute privileged commands,
set up the sudo(1) facility. This will let you grant permission with a fine
level of control about exactly which program or command is being used. As a
bonus, you will get an audit trail of who did what as whom.
The great thing about sudo(1) is that you can grant root privilege without
having to give out root's password.
Now, assume you make duplicate "root" accounts. You get offered a better job
and leave. The new sysadmin will need careful briefing before doing anything.
This will create a major maintainability issue long term.
If you want another root user for disaster recovery or losing the password,
there are better alternatives such as:
-- Reboot the system using rescue mode from the installation disks.
-- Boot into single-user mode by interrupting the GRUB install sequence and appending "s" to the kernel command line.
-- Boot into an interactive shell by appending the "init=/bin/bash" clause using the same technique.
These are some of the known, common, best practice methods of handling this
situation. A custom solution here could be quite dangerous and hard to maintain
in the long run.
Please don't. -
[SOLVED] systemd: no kernel messages in the journal
Hi
Currently the journal holds only application logs; I do not see any kernel logs in the journal. This is an old Arch system that was using syslog-ng but was transitioned to systemd when Arch made systemd default. This was working well until about three weeks back, when journal stopped holding kernel messages. The journal was causing journalctl to crash and I couldn't verify the journal since I had FSS setup but forgotten the keys. So, I had disabled the FSS, cleared the journals to startover again. Only to see kernel messages are not getting logged.
I would be grrateful for any help in resolving the issue. Thank you!
Last edited by chaembian (2013-11-20 02:53:00)OK, I removed the commandline options, regenerated grub config, rebooted.
journalctl --dmesg starts:
-- Logs begin at Sun 2013-11-17 23:26:51 IST, end at Sun 2013-11-17 23:35:38 IST. --
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
Nov 17 23:26:51 chaembian kernel: snd_hda_intel 0000:01:05.1: setting latency timer to 64
Nov 17 23:26:51 chaembian kernel: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
Nov 17 23:26:51 chaembian kernel: microcode: CPU0: new patch_level=0x010000c8
Nov 17 23:26:51 chaembian kernel: microcode: CPU1: patch_level=0x010000b6
Nov 17 23:26:51 chaembian kernel: microcode: CPU1: new patch_level=0x010000c8
Nov 17 23:26:51 chaembian kernel: microcode: CPU2: patch_level=0x010000b6
Nov 17 23:26:51 chaembian kernel: microcode: CPU2: new patch_level=0x010000c8
Nov 17 23:26:51 chaembian kernel: microcode: CPU3: patch_level=0x010000b6
Nov 17 23:26:51 chaembian kernel: microcode: CPU3: new patch_level=0x010000c8
Nov 17 23:26:51 chaembian kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Nov 17 23:26:51 chaembian kernel: media: Linux media interface: v0.10
Nov 17 23:26:51 chaembian kernel: Linux video capture interface: v2.00
Nov 17 23:26:51 chaembian kernel: kvm: Nested Virtualization enabled
Nov 17 23:26:51 chaembian kernel: kvm: Nested Paging enabled
Nov 17 23:26:52 chaembian kernel: hidraw: raw HID events driver (C) Jiri Kosina
That is indeed a step in the right direction.
dmesg for cross-reference
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=639e14d4-e548-48ed-a6e5-c73a19c618ff rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff98000-0x00000000cffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-M EVO, BIOS 1702 12/10/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37690000-0x37b3ffff]
[ 0.000000] ACPI: RSDP 00000000000fb570 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 0005C (v01 121010 XSDT1437 20101210 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 121010 FACP1437 20101210 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80450 0F2D6 (v01 A1581 A1581001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff98000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0007C (v01 121010 APIC1437 20101210 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80410 0003C (v01 121010 OEMMCFG 20101210 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 121010 OEMB1437 20101210 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cff8f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cff8f990 00038 (v01 121010 OEMHPET 20101210 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA [mem 0x11fff9000-0x11fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ba00000-ffff88011f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
[ 0.000000] On node 0 totalpages: 982809
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13246 pages used for memmap
[ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff98000-0xcffcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86528 r8192 d24064 u262144
[ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 967430
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=639e14d4-e548-48ed-a6e5-c73a19c618ff rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3720876K/3931236K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 210360K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15728640 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3415.125 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6832.84 BogoMIPS (lpj=11383750)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000033] AppArmor: AppArmor disabled by boot time parameter
[ 0.000034] Yama: becoming mindful.
[ 0.000231] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001248] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001717] Mount-cache hash table entries: 256
[ 0.001875] Initializing cgroup subsys memory
[ 0.001885] Initializing cgroup subsys devices
[ 0.001887] Initializing cgroup subsys freezer
[ 0.001888] Initializing cgroup subsys net_cls
[ 0.001889] Initializing cgroup subsys blkio
[ 0.001904] tseg: 0000000000
[ 0.001910] CPU: Physical Processor ID: 0
[ 0.001910] CPU: Processor Core ID: 0
[ 0.001912] mce: CPU supports 6 MCE banks
[ 0.001916] LVT offset 0 assigned for vector 0xf9
[ 0.001919] process: using AMD E400 aware idle routine
[ 0.001921] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.001983] Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
[ 0.002531] ACPI: Core revision 20130517
[ 0.006010] ACPI: All ACPI Tables successfully acquired
[ 0.109344] ftrace: allocating 20100 entries in 79 pages
[ 0.116210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.149233] smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)
[ 0.253603] Performance Events: AMD PMU driver.
[ 0.253606] ... version: 0
[ 0.253607] ... bit width: 48
[ 0.253608] ... generic registers: 4
[ 0.253609] ... value mask: 0000ffffffffffff
[ 0.253609] ... max period: 00007fffffffffff
[ 0.253610] ... fixed-purpose events: 0
[ 0.253611] ... event mask: 000000000000000f
[ 0.253639] process: System has AMD C1E enabled
[ 0.253645] process: Switch to broadcast mode on CPU0
[ 0.270404] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.290256] process: Switch to broadcast mode on CPU1
[ 0.306943] process: Switch to broadcast mode on CPU2
[ 0.277079] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.323592] Brought up 4 CPUs
[ 0.323595] smpboot: Total of 4 processors activated (27331.37 BogoMIPS)
[ 0.323636] process: Switch to broadcast mode on CPU3
[ 0.328034] devtmpfs: initialized
[ 0.329347] PM: Registering ACPI NVS region [mem 0xcff98000-0xcffcffff] (229376 bytes)
[ 0.330091] RTC time: 17:56:43, date: 11/17/13
[ 0.330127] NET: Registered protocol family 16
[ 0.330208] node 0 link 0: io port [1000, ffffff]
[ 0.330210] TOM: 00000000d0000000 aka 3328M
[ 0.330212] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.330213] node 0 link 0: mmio [a0000, bffff]
[ 0.330215] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.330217] node 0 link 0: mmio [f0000000, fe6fffff]
[ 0.330219] node 0 link 0: mmio [fe700000, fe8fffff]
[ 0.330220] node 0 link 0: mmio [fe900000, ffdfffff]
[ 0.330221] TOM2: 0000000130000000 aka 4864M
[ 0.330222] bus: [bus 00-07] on node 0 link 0
[ 0.330223] bus: 00 [io 0x0000-0xffff]
[ 0.330224] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.330225] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.330226] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.330227] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.330268] ACPI: bus type PCI registered
[ 0.330269] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.330314] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.330316] PCI: not using MMCONFIG
[ 0.330317] PCI: Using configuration type 1 for base access
[ 0.330317] PCI: Using configuration type 1 for extended access
[ 0.330790] bio: create slab <bio-0> at 0
[ 0.330911] ACPI: Added _OSI(Module Device)
[ 0.330913] ACPI: Added _OSI(Processor Device)
[ 0.330914] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.330915] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.331704] ACPI: EC: Look up EC in DSDT
[ 0.343813] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.657725] ACPI: Interpreter enabled
[ 0.657735] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.657746] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.657748] ACPI: Using IOAPIC for interrupt routing
[ 0.657763] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.658965] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.665871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.665931] ACPI: No dock devices found.
[ 0.670245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.670357] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.670453] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[ 0.670632] PCI host bridge to bus 0000:00
[ 0.670635] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.670636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.670638] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.670639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.670641] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.670642] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.670643] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.670652] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.670728] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
[ 0.670791] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.670818] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.670846] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.670871] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.670897] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.670924] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.670947] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.670974] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.671001] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.671023] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.671050] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.671077] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.671108] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.671122] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
[ 0.671129] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
[ 0.671135] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
[ 0.671142] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
[ 0.671149] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
[ 0.671156] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff]
[ 0.671231] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.671241] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff]
[ 0.671303] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.671332] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.671346] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.671405] pci 0000:00:12.2: supports D1 D2
[ 0.671406] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.671435] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.671464] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.671474] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff]
[ 0.671536] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.671563] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.671577] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.671635] pci 0000:00:13.2: supports D1 D2
[ 0.671637] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.671665] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.671691] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.671780] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.671795] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
[ 0.671842] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.671870] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.671893] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.671979] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.672026] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.672049] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.672059] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff]
[ 0.672121] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.672146] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.672156] pci 0000:00:16.0: reg 0x10: [mem 0xfe6f3000-0xfe6f3fff]
[ 0.672218] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.672245] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.672258] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff]
[ 0.672317] pci 0000:00:16.2: supports D1 D2
[ 0.672318] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.672347] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.672372] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.672416] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.672457] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.672499] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.672542] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.672618] pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
[ 0.672624] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.672628] pci 0000:01:05.0: reg 0x14: [io 0xa000-0xa0ff]
[ 0.672632] pci 0000:01:05.0: reg 0x18: [mem 0xfe8f0000-0xfe8fffff]
[ 0.672639] pci 0000:01:05.0: reg 0x24: [mem 0xfe700000-0xfe7fffff]
[ 0.672654] pci 0000:01:05.0: supports D1 D2
[ 0.672678] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.672684] pci 0000:01:05.1: reg 0x10: [mem 0xfe8e8000-0xfe8ebfff]
[ 0.672709] pci 0000:01:05.1: supports D1 D2
[ 0.672750] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.672753] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.672755] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.672758] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.672796] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.672810] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff 64bit]
[ 0.672875] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.680606] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.680611] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.680673] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.680702] pci 0000:03:00.0: reg 0x10: [mem 0xfeaff800-0xfeafffff 64bit]
[ 0.680717] pci 0000:03:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.680838] pci 0000:03:00.0: supports D2
[ 0.680839] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.690631] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.690635] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
[ 0.690637] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.690704] pci 0000:04:00.0: [1106:0415] type 00 class 0x010185
[ 0.690726] pci 0000:04:00.0: reg 0x10: [io 0xcc00-0xcc07]
[ 0.690740] pci 0000:04:00.0: reg 0x14: [io 0xc880-0xc883]
[ 0.690755] pci 0000:04:00.0: reg 0x18: [io 0xc800-0xc807]
[ 0.690769] pci 0000:04:00.0: reg 0x1c: [io 0xc480-0xc483]
[ 0.690783] pci 0000:04:00.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.690811] pci 0000:04:00.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.690883] pci 0000:04:00.0: supports D1 D2
[ 0.690885] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.700620] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.700625] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.700627] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.700675] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.700687] pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.700705] pci 0000:05:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.700717] pci 0000:05:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.700768] pci 0000:05:00.0: supports D1 D2
[ 0.700769] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.710623] pci 0000:00:0a.0: PCI bridge to [bus 05]
[ 0.710627] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.710631] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.710674] pci 0000:06:05.0: [1412:1724] type 00 class 0x040100
[ 0.710691] pci 0000:06:05.0: reg 0x10: [io 0xec00-0xec1f]
[ 0.710701] pci 0000:06:05.0: reg 0x14: [io 0xe880-0xe8ff]
[ 0.710769] pci 0000:06:05.0: supports D2
[ 0.710824] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[ 0.710827] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.710832] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.710833] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.710835] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.710836] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.710837] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.710839] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.711399] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.711445] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.711491] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.711536] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
[ 0.711572] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.711602] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.711631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.711661] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.711760] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.711764] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.711791] Found 1 acpi root devices
[ 0.711811] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.711884] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.711885] vgaarb: loaded
[ 0.711886] vgaarb: bridge control possible 0000:01:05.0
[ 0.711914] PCI: Using ACPI for IRQ routing
[ 0.717926] PCI: pci_cache_line_size set to 64 bytes
[ 0.717976] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.717978] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.718041] NetLabel: Initializing
[ 0.718042] NetLabel: domain hash size = 128
[ 0.718042] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.718052] NetLabel: unlabeled traffic allowed by default
[ 0.718064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.718066] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.720112] Switched to clocksource hpet
[ 0.723318] pnp: PnP ACPI init
[ 0.723328] ACPI: bus type PNP registered
[ 0.723421] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.723488] pnp 00:01: [dma 4]
[ 0.723503] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.723526] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.723543] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.723560] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.723934] pnp 00:05: [dma 0 disabled]
[ 0.724064] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.724097] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.724374] pnp 00:07: [dma 0 disabled]
[ 0.724425] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.724491] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.724493] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.724495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.724649] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.724651] system 00:09: [io 0x040b] has been reserved
[ 0.724653] system 00:09: [io 0x04d6] has been reserved
[ 0.724654] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.724656] system 00:09: [io 0x0c14] has been reserved
[ 0.724657] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.724659] system 00:09: [io 0x0c52] has been reserved
[ 0.724660] system 00:09: [io 0x0c6c] has been reserved
[ 0.724661] system 00:09: [io 0x0c6f] has been reserved
[ 0.724663] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.724664] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.724666] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.724667] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.724669] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.724670] system 00:09: [io 0x0b00-0x0b3f] has been reserved
[ 0.724672] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.724673] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 0.724675] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.724677] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.724678] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.724680] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.724682] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.724683] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.724685] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.724686] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.724688] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.724807] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.724809] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.724810] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.724812] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.724814] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.724858] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.724860] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.724952] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.724953] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.724955] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.724957] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.724958] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.724960] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.725022] pnp: PnP ACPI: found 13 devices
[ 0.725022] ACPI: bus type PNP unregistered
[ 0.731469] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.731472] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.731474] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.731476] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.731479] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.731481] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.731484] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.731486] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
[ 0.731488] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.731491] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.731493] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.731495] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.731498] pci 0000:00:0a.0: PCI bridge to [bus 05]
[ 0.731499] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.731502] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.731505] pci 0000:00:14.4: PCI bridge to [bus 06]
[ 0.731507] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.731716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.731718] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.731719] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.731721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.731722] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.731723] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.731725] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.731726] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.731727] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.731729] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.731730] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.731732] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.731733] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.731734] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.731736] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.731737] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.731739] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.731740] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.731741] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.731742] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.731744] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.731745] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.731746] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.731774] NET: Registered protocol family 2
[ 0.731920] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.732050] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.732170] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.732202] TCP: reno registered
[ 0.732208] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.732229] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.732295] NET: Registered protocol family 1
[ 0.732302] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.774244] pci 0000:01:05.0: Boot video device
[ 1.774293] PCI: CLS 64 bytes, default 64
[ 1.774329] Unpacking initramfs...
[ 1.838503] Freeing initrd memory: 4800K (ffff880037690000 - ffff880037b40000)
[ 1.839314] PCI-DMA: Disabling AGP.
[ 1.839384] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.839385] PCI-DMA: using GART IOMMU.
[ 1.839387] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.842458] LVT offset 1 assigned for vector 0x400
[ 1.842466] IBS: LVT offset 1 assigned
[ 1.842487] perf: AMD IBS detected (0x0000001f)
[ 1.842507] Scanning for low memory corruption every 60 seconds
[ 1.842725] audit: initializing netlink socket (disabled)
[ 1.842734] type=2000 audit(1384711004.543:1): initialized
[ 1.851049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.852054] zbud: loaded
[ 1.852166] VFS: Disk quotas dquot_6.5.2
[ 1.852200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.852354] msgmni has been set to 7405
[ 1.852587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.852634] io scheduler noop registered
[ 1.852637] io scheduler deadline registered
[ 1.852674] io scheduler cfq registered (default)
[ 1.852784] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.852849] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.852906] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.852964] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 1.853049] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.853053] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.853055] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 1.853064] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 1.853066] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.853068] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 1.853078] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.853079] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.853081] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.853092] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.853093] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.853095] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.853105] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.853116] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.853160] vesafb: mode is 1920x1440x32, linelength=7680, pages=0
[ 1.853161] vesafb: scrolling: redraw
[ 1.853162] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.853503] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 10816k, total 10816k
[ 2.187925] Console: switching to colour frame buffer device 240x90
[ 2.522112] fb0: VESA VGA frame buffer device
[ 2.522136] GHES: HEST is not enabled!
[ 2.522194] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.542718] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.543025] Linux agpgart interface v0.103
[ 2.543063] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.543414] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.543440] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.543545] mousedev: PS/2 mouse device common for all mice
[ 2.543591] rtc_cmos 00:02: RTC can wake from S4
[ 2.543688] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.543707] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.543713] cpuidle: using governor ladder
[ 2.543715] cpuidle: using governor menu
[ 2.543764] drop_monitor: Initializing network drop monitor service
[ 2.543811] TCP: cubic registered
[ 2.543876] NET: Registered protocol family 10
[ 2.544001] NET: Registered protocol family 17
[ 2.544009] Key type dns_resolver registered
[ 2.544240] PM: Hibernation image not present or could not be loaded.
[ 2.544247] registered taskstats version 1
[ 2.544768] Magic number: 5:4:947
[ 2.544782] tty tty4: hash matches
[ 2.544801] cpu cpu2: hash matches
[ 2.544807] memory memory0: hash matches
[ 2.544836] rtc_cmos 00:02: setting system clock to 2013-11-17 17:56:45 UTC (1384711005)
[ 2.545743] Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
[ 2.545745] Write protecting the kernel read-only data: 8192k
[ 2.547931] Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
[ 2.548636] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
[ 2.554741] systemd-udevd[57]: starting version 208
[ 2.556092] SCSI subsystem initialized
[ 2.556877] ACPI: bus type ATA registered
[ 2.556944] libata version 3.00 loaded.
[ 2.557360] ahci 0000:00:11.0: version 3.0
[ 2.557535] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.557538] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.558505] scsi0 : ahci
[ 2.558599] scsi1 : ahci
[ 2.558778] scsi2 : ahci
[ 2.558868] scsi3 : ahci
[ 2.559022] scsi4 : ahci
[ 2.559089] scsi5 : ahci
[ 2.559150] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19
[ 2.559153] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19
[ 2.559155] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19
[ 2.559156] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19
[ 2.559159] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19
[ 2.559161] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19
[ 2.560807] [drm] Initialized drm 1.1.0 20060810
[ 2.564745] [drm] radeon kernel modesetting enabled.
[ 2.564805] checking generic (d0000000 a90000) vs hw (d0000000 10000000)
[ 2.564808] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 2.564821] Console: switching to colour dummy device 80x25
[ 2.565086] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
[ 2.565095] [drm] register mmio base: 0xFE8F0000
[ 2.565096] [drm] register mmio size: 65536
[ 2.565630] ATOM BIOS: 113
[ 2.565643] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
[ 2.565645] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 2.565648] [drm] Detected VRAM RAM=368M, BAR=256M
[ 2.565649] [drm] RAM width 32bits DDR
[ 2.565696] [TTM] Zone kernel: Available graphics memory: 1897112 kiB
[ 2.565697] [TTM] Initializing pool allocator
[ 2.565700] [TTM] Initializing DMA pool allocator
[ 2.565716] [drm] radeon: 368M of VRAM memory ready
[ 2.565717] [drm] radeon: 512M of GTT memory ready.
[ 2.565725] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.576556] [drm] Loading RS780 Microcode
[ 2.578778] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 2.578836] radeon 0000:01:05.0: WB enabled
[ 2.578838] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880117cfdc00
[ 2.578839] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880117cfdc0c
[ 2.578841] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.578842] [drm] Driver supports precise vblank timestamp query.
[ 2.578860] [drm] radeon: irq initialized.
[ 2.579084] radeon 0000:01:05.0: setting latency timer to 64
[ 2.611015] [drm] ring test on 0 succeeded in 1 usecs
[ 2.611072] [drm] ring test on 3 succeeded in 1 usecs
[ 2.611137] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.611149] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.611351] [drm] Radeon Display Connectors
[ 2.611352] [drm] Connector 0:
[ 2.611353] [drm] VGA-1
[ 2.611355] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 2.611355] [drm] Encoders:
[ 2.611356] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.611357] [drm] Connector 1:
[ 2.611357] [drm] DVI-D-1
[ 2.611358] [drm] HPD1
[ 2.611359] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 2.611360] [drm] Encoders:
[ 2.611361] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 2.611408] [drm] radeon: power management initialized
[ 2.652806] [drm] fb mappable at 0xD0142000
[ 2.652807] [drm] vram apper at 0xD0000000
[ 2.652808] [drm] size 5242880
[ 2.652808] [drm] fb depth is 24
[ 2.652809] [drm] pitch is 5120
[ 2.652866] fbcon: radeondrmfb (fb0) is primary device
[ 2.664744] Console: switching to colour frame buffer device 160x64
[ 2.675575] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 2.675577] radeon 0000:01:05.0: registered panic notifier
[ 2.675630] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
[ 2.692173] pata_via 0000:04:00.0: version 0.3.4
[ 2.693001] scsi6 : pata_via
[ 2.693202] scsi7 : pata_via
[ 2.693237] ata7: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 2.693238] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 2.693302] ACPI: bus type USB registered
[ 2.693369] usbcore: registered new interface driver usbfs
[ 2.693378] usbcore: registered new interface driver hub
[ 2.693419] usbcore: registered new device driver usb
[ 2.694028] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.694034] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 2.694163] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.694168] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.694173] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.694177] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.694181] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.694382] xHCI xhci_add_endpoint called for root hub
[ 2.694383] xHCI xhci_check_bandwidth called for root hub
[ 2.694913] hub 1-0:1.0: USB hub found
[ 2.694918] hub 1-0:1.0: 2 ports detected
[ 2.695055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.695347] ehci-pci: EHCI PCI platform driver
[ 2.695437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.695532] ohci-pci: OHCI PCI platform driver
[ 2.695613] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.695617] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 2.697530] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.697595] xHCI xhci_add_endpoint called for root hub
[ 2.697596] xHCI xhci_check_bandwidth called for root hub
[ 2.697636] hub 2-0:1.0: USB hub found
[ 2.697645] hub 2-0:1.0: 2 ports detected
[ 2.697762] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 2.697764] QUIRK: Enable AMD PLL fix
[ 2.697766] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.697776] ehci-pci 0000:00:12.2: debug port 1
[ 2.697800] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 2.704582] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.704674] hub 3-0:1.0: USB hub found
[ 2.704677] hub 3-0:1.0: 5 ports detected
[ 2.704845] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.704850] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.704852] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.704861] ehci-pci 0000:00:13.2: debug port 1
[ 2.704883] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400
[ 2.714637] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.714734] hub 4-0:1.0: USB hub found
[ 2.714737] hub 4-0:1.0: 5 ports detected
[ 2.714896] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.714900] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 2.714903] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.714911] ehci-pci 0000:00:16.2: debug port 1
[ 2.714930] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000
[ 2.724628] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.724725] hub 5-0:1.0: USB hub found
[ 2.724728] hub 5-0:1.0: 4 ports detected
[ 2.724888] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.724892] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 2.724904] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000
[ 2.758021] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 2.782133] hub 6-0:1.0: USB hub found
[ 2.782138] hub 6-0:1.0: 5 ports detected
[ 2.782291] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.782296] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 2.782308] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000
[ 2.838807] hub 7-0:1.0: USB hub found
[ 2.838813] hub 7-0:1.0: 5 ports detected
[ 2.838974] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.838978] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 2.838989] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000
[ 2.844705] tsc: Refined TSC clocksource calibration: 3415.257 MHz
[ 2.871387] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.874721] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.878060] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.878096] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.895510] hub 8-0:1.0: USB hub found
[ 2.895515] hub 8-0:1.0: 2 ports detected
[ 2.895650] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.895654] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 2.895665] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000
[ 2.952187] hub 9-0:1.0: USB hub found
[ 2.952192] hub 9-0:1.0: 4 ports detected
[ 3.011462] usb 3-3: new high-speed USB device number 2 using ehci-pci
[ 3.041482] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.042668] ata5.00: ATA-8: ST31000524AS, JC45, max UDMA/133
[ 3.042671] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.044091] ata5.00: configured for UDMA/133
[ 3.044818] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.046010] ata2.00: ATA-8: ST31000524AS, JC45, max UDMA/133
[ 3.046012] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.047443] ata2.00: configured for UDMA/133
[ 3.047593] scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
[ 3.047815] scsi 4:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
[ 3.048310] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.048332] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.048407] sd 1:0:0:0: [sda] Write Protect is off
[ 3.048410] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.048414] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.048416] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.048445] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.048454] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.082120] sdb: sdb1 < sdb5 >
[ 3.082492] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.123617] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 3.124128] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.258326] firewire_core 0000:03:00.0: created device fw0: GUID 001e8c0000dded87, S400
[ 3.845323] Switched to clocksource tsc
[ 3.887097] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4.225475] usb 7-1: new low-speed USB device number 2 using ohci-pci
[ 4.639033] usb 9-4: new full-speed USB device number 2 using ohci-pci
[ 4.953305] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.973795] systemd[1]: Set hostname to <chaembian>.
[ 5.179335] usb 6-4: new full-speed USB device number 2 using ohci-pci
[ 5.596246] usb 6-5: new low-speed USB device number 3 using ohci-pci
[ 5.801932] systemd[1]: Cannot add dependency job for unit vnstat.service, ignoring: Unit vnstat.service failed to load: No such file or directory.
[ 5.801948] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.802146] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.802185] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.802193] systemd[1]: Starting Login Prompts.
[ 5.802200] systemd[1]: Reached target Login Prompts.
[ 5.802206] systemd[1]: Starting Remote File Systems.
[ 5.802211] systemd[1]: Reached target Remote File Systems.
[ 5.802218] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.802235] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.802240] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.802253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.802258] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.802272] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.802278] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.802294] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.802303] systemd[1]: Starting udev Kernel Socket.
[ 5.802314] systemd[1]: Listening on udev Kernel Socket.
[ 5.802321] systemd[1]: Starting udev Control Socket.
[ 5.802332] systemd[1]: Listening on udev Control Socket.
[ 5.802340] systemd[1]: Starting Journal Socket.
[ 5.802364] systemd[1]: Listening on Journal Socket.
[ 5.828144] systemd[1]: Started Load Kernel Modules.
[ 5.837412] systemd[1]: Starting Apply Kernel Variables...
[ 5.837770] systemd[1]: Starting udev Coldplug all Devices...
[ 5.838054] systemd[1]: Starting Setup Virtual Console...
[ 5.838365] systemd[1]: Starting Journal Service...
[ 5.838647] systemd[1]: Started Journal Service.
[ 6.402315] systemd-journald[139]: Vacuuming done, freed 0 bytes
[ 7.319880] systemd-udevd[177]: starting version 208
[ 7.794545] wmi: Mapper loaded
[ 7.847347] parport_pc 00:05: reported by Plug and Play ACPI
[ 7.847391] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.851969] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130517/utaddress-251)
[ 7.851974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.874491] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 7.874519] sp5100_tco: PCI Revision ID: 0x41
[ 7.874547] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 7.874557] sp5100_tco: Last reboot was not triggered by watchdog.
[ 7.874600] sp5100_tco: initialized (0xffffc900123fcb00). heartbeat=60 sec (nowayout=0)
[ 7.881641] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 7.881645] ACPI: Power Button [PWRB]
[ 7.881697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.881699] ACPI: Power Button [PWRF]
[ 7.882757] ACPI: processor limited to max C-state 1
[ 7.905064] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.918926] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.165090] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.165417] r8169 0000:05:00.0: irq 49 for MSI/MSI-X
[ 8.165792] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc900123fe000, 20:cf:30:4c:49:a9, XID 0c200000 IRQ 49
[ 8.165800] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.342332] MCE: In-kernel MCE decoding enabled.
[ 8.346927] EDAC MC: Ver: 3.0.0
[ 8.348961] AMD64 EDAC driver v3.4.0
[ 8.349044] EDAC amd64: DRAM ECC disabled.
[ 8.349073] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 8.495021] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 8.558418] snd_ice1724 0000:06:05.0: enabling device (0000 -> 0001)
[ 8.558556] snd_ice1724 0000:06:05.0: setting latency timer to 64
[ 8.587452] ice1724: No matching model found for ID 0xffffffa0
[ 8.588183] ice1724: Invalid EEPROM (size = 255)
[ 8.588437] snd_ice1724: probe of 0000:06:05.0 failed with error -5
[ 8.607952] microcode: CPU0: patch_level=0x010000b6
[ 8.629397] ppdev: user-space parallel port driver
[ 8.825646] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 8.825863] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 8.826029] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 8.826190] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 8.826357] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 8.826514] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 8.826667] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.826823] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.827628] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 8.868368] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
[ 9.003261] microcode: CPU0: new patch_level=0x010000c8
[ 9.003302] microcode: CPU1: patch_level=0x010000b6
[ 9.003328] microcode: CPU1: new patch_level=0x010000c8
[ 9.003357] microcode: CPU2: patch_level=0x010000b6
[ 9.003381] microcode: CPU2: new patch_level=0x010000c8
[ 9.003396] microcode: CPU3: patch_level=0x010000b6
[ 9.003412] microcode: CPU3: new patch_level=0x010000c8
[ 9.003552] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.031976] media: Linux media interface: v0.10
[ 9.034867] Linux video capture interface: v2.00
[ 9.043789] kvm: Nested Virtualization enabled
[ 9.043793] kvm: Nested Paging enabled
[ 9.244784] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.423576] usbcore: registered new interface driver usbhid
[ 9.423583] usbhid: USB HID core driver
[ 9.513383] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input12
[ 9.513638] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 9.514469] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/input/input13
[ 9.514899] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 9.516355] input: C-Media Electronics Inc. Philips SPA5210 as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.2/input/input14
[ 9.516925] hid-generic 0003:0D8C:0126.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. Philips SPA5210] on usb-0000:00:16.0-4/input2
[ 9.595842] hid-generic 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS RS 1000G-IN FW:900.L4 .I USB FW:L4 ] on usb-0000:00:12.0-4/input0
[ 9.596476] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input15
[ 9.596993] hid-generic 0003:046D:C05B.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0
[ 9.885366] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9.886617] ata5.00: failed to set xfermode (err_mask=0x100)
[ 10.370083] set resolution quirk: cval->res = 384
[ 10.370534] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 10.385720] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input16
[ 10.385897] usbcore: registered new interface driver uvcvideo
[ 10.385902] USB Video Class driver (1.1.1)
[ 10.443673] usbcore: registered new interface driver snd-usb-audio
[ 10.530521] Adding 995992k swap on /dev/sda7. Priority:-1 extents:1 across:995992k FS
[ 17.204835] systemd-journald[139]: Received request to flush runtime journal from PID 1
[ 17.564410] systemd-journald[139]: Vacuuming done, freed 4194304 bytes
[ 17.564429] systemd-journald[139]: Vacuuming done, freed 0 bytes
[ 17.594012] systemd-journald[139]: Vacuuming done, freed 4198400 bytes
[ 17.594091] systemd-journald[139]: Deleted empty journal /run/log/journal/e44c../[email protected] (684032 bytes).
[ 17.594101] systemd-journald[139]: Vacuuming done, freed 684032 bytes
[ 18.430485] r8169 0000:05:00.0 eth0: link down
[ 18.430501] r8169 0000:05:00.0 eth0: link down
[ 18.430540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.057527] r8169 0000:05:00.0 eth0: link up
[ 20.057545] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.308009] systemd-journald[139]: File /var/log/journal/e44c../user-1004.journal corrupted or uncleanly shut down, renaming and replacing.
[ 31.900749] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 32.146160] fuse init (API version 7.22)
[ 63.406994] systemd-journald[139]: File /var/log/journal/e44c../user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
I did not get any output when I tried: " journalctl -b --dmesg | grep systemd". However, when I tried "journalctl | grep systemd", I got these:
Nov 17 23:26:51 chaembian systemd[1]: Starting Sound Card.
Nov 17 23:26:51 chaembian systemd[1]: Reached target Sound Card.
Nov 17 23:26:52 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:52 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/cd1ecac7-97b5-4bcc-b114-858efb77e4c5...
Nov 17 23:26:52 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:52 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/8f972288-02c8-4dd7-a590-400f4fe60244...
Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:53 chaembian systemd[1]: Activating swap /dev/disk/by-uuid/cf5549b8-edd7-465a-985c-c096f39b916e...
Nov 17 23:26:53 chaembian systemd-fsck[254]: fsck.jfs version 1.1.15, 04-Mar-2011
Nov 17 23:26:53 chaembian systemd-fsck[254]: processing started: 11/17/2013 23:26:53
Nov 17 23:26:53 chaembian systemd-fsck[254]: The current device is: /dev/sda9
Nov 17 23:26:53 chaembian systemd-fsck[254]: Block size in bytes: 4096
Nov 17 23:26:53 chaembian systemd-fsck[254]: Filesystem size in blocks: 50000094
Nov 17 23:26:53 chaembian systemd-fsck[254]: **Phase 0 - Replay Journal Log
Nov 17 23:26:53 chaembian systemd-fsck[254]: Filesystem is clean.
Nov 17 23:26:53 chaembian systemd[1]: Started File System Check on /dev/disk/by-uuid/8f972288-02c8-4dd7-a590-400f4fe60244.
Nov 17 23:26:53 chaembian systemd[1]: Activated swap /dev/disk/by-uuid/cf5549b8-edd7-465a-985c-c096f39b916e.
Nov 17 23:26:53 chaembian systemd[1]: Starting Swap.
Nov 17 23:26:53 chaembian systemd[1]: Reached target Swap.
Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/b36313d6-8efb-444c-b6c9-0d3ca3bdaad1...
Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/e4ee5aff-ef4a-436c-9385-cb37b98df3e1...
Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/da692a03-33e5-4aad-b716-7dedfea99f85...
Nov 17 23:26:53 chaembian systemd-fsck[267]: fsck.jfs version 1.1.15, 04-Mar-2011
Nov 17 23:26:53 chaembian systemd-fsck[267]: processing started: 11/17/2013 23:26:53
Nov 17 23:26:53 chaembian systemd-fsck[267]: The current device is: /dev/sda8
Nov 17 23:26:53 chaembian systemd-fsck[267]: Block size in bytes: 4096
Nov 17 23:26:53 chaembian systemd-fsck[267]: Filesystem size in blocks: 24999140
Nov 17 23:26:53 chaembian systemd-fsck[267]: **Phase 0 - Replay Journal Log
Nov 17 23:26:53 chaembian systemd-fsck[267]: Filesystem is clean.
Nov 17 23:26:53 chaembian systemd[1]: Started File System Check on /dev/disk/by-uuid/b36313d6-8efb-444c-b6c9-0d3ca3bdaad1.
Nov 17 23:26:53 chaembian systemd[1]: Mounting /home...
Nov 17 23:26:53 chaembian systemd-fsck[273]: fsck.jfs version 1.1.15, 04-Mar-2011
Nov 17 23:26:53 chaembian systemd-fsck[273]: processing started: 11/17/2013 23:26:53
Nov 17 23:26:53 chaembian systemd-fsck[273]: The current device is: /dev/sda10
Nov 17 23:26:53 chaembian systemd-fsck[273]: Block size in bytes: 4096
Nov 17 23:26:53 chaembian systemd-fsck[273]: Filesystem size in blocks: 161393838
Nov 17 23:26:53 chaembian systemd-fsck[273]: **Phase 0 - Replay Journal Log
Nov 17 23:26:53 chaembian systemd-fsck[273]: Filesystem i -
OVS 2.2 :: Unable to install RHEL HVM on physical disk from command line
[root@ovs2 xen]# /usr/sbin/virt-install hvm name=test2 ram=1024 vcpus=1 bridge=xenbr0 file /dev/sdc --nographics
What would you like to use for the virtual CD image? /var/ovs/mount/1FB2E6B36D21418792A1DD30B62C689F/iso_pool/rhel-server-5.6-x86_64-dvd.iso
Starting install...
Guest installation complete... restarting guest.
exception was: Domain named test2 already exists!
Domain installation may not have been
successful. If it was, you can restart your domain
by running 'xm create -c test2'; otherwise, please
restart your installation.
[root@ovs2 xen]# more test2
# Automatically generated xen config file
name = "test2"
builder = "hvm"
memory = "1024"
disk = [ 'phy:/dev/sdc,hda,w', ]
vif = [ 'type=ioemu, mac=00:16:3e:3d:d0:5c, bridge=xenbr0', ]
uuid = "f99f6a07-6d03-a0ae-8f2f-a7a0e1af5e31"
device_model = "/usr/lib/xen/bin/qemu-dm"
kernel = "/usr/lib/xen/boot/hvmloader"
nographic=1
timer_mode=0
apic=1
acpi=1
pae=1
vcpus=1
serial = "pty" # enable serial console
on_reboot = 'restart'
on_crash = 'restart'
[root@ovs2 xen]# xm console test2
xenconsole: Could not read tty from store: No such file or directory
[root@ovs2 xen]#
+ No errors in xend.log or qemu-*.log
+ hypervisor inittab is default .. co:2345:respawn:/sbin/agetty xvc0 9600 vt100-nav
Using similar syntax, and installing paravirtualized guest to physical disk works fine.
[root@ovs2 xen]# /usr/sbin/virt-install paravirt name=demo3 ram=1024 vcpus=2 bridge=xenbr0 file=/dev/sdc nographics location=http://192.168.229.74/RHEL5764bit
Starting install...
Bootdata ok (command line is method=http://192.168.229.74/RHEL5764bit )
Linux version 2.6.18-238.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Sun Dec 19 14:42:02 EST 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 264192
Kernel command line: method=http://192.168.229.74/RHEL5764bit ...................................
Any suggestions ??and i go to the temp mountpoint that the script will mount on
Starting install...
ERROR: Invalid NFS location given: [Errno 2] No such file or directory: '/var/lib/xen/xennfs.7x4Rf4/boot/x86_64/vmlinuz-xen'
[root@ovs2 opt1]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p2 3050092 3033308 0 100% /
/dev/cciss/c0d0p1 101086 47114 48753 50% /boot
tmpfs 288856 0 288856 0% /dev/shm
none 288768 40 288728 1% /var/lib/xenstored
/dev/cciss/c0d0p3 288623616 301056 288322560 1% /var/ovs/mount/A52CB661C1CF41D198D50F6379822694
/var/isos/OracleLinux-R5-U7-Server-x86_64-dvd.iso
3755446 3755446 0 100% /el/EL5-x86
192.168.229.110:/el/EL5-x86
3755456 3755456 0 100% /opt1
192.168.229.110:/el/EL5-x86/
3755456 3755456 0 100% /var/lib/xen/xennfs.NnE54I
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xennfs.NnE54I/
[root@ovs2 xennfs.NnE54I]# ls
blafdoc.css EULA GPL README-en RELEASE-NOTES-en.html Server VT
Cluster eula.en_US images README-en.html RPM-GPG-KEY supportinfo
ClusterStorage eula.py isolinux RELEASE-NOTES-en RPM-GPG-KEY-oracle TRANS.TBL
[root@ovs2 xennfs.NnE54I]# find . -name vmlinuz\*
./images/pxeboot/vmlinuz
./images/xen/vmlinuz
./isolinux/vmlinuz
[root@ovs2 xennfs.NnE54I]# -
I know how to configure Firefox so that it opens multiple tabs every time you open ''Firefox''. I want it to open multiple tabs when I start ''Windows''. Or in other words, I don't want to connect to multiple web pages every time I open a browser, just the first time I log on for the day.
I tried appending the web sites in the command line of a Firefox shortcut in my Windows Startup folder. The problem is that in this approach, you're limited to as many URL's as you can type in about 204 characters ('C:\Program Files (x86)\Mozilla Firefox\firefox.exe' uses up 52 of the 256 characters available in a shortcut).
Is there a way to open more tabbed web sites than that?
What would be cool is if there was something like a FFstartup.ini file or something, where you could provide a list of websites as long as you want, and it would open them all. So, the command line would look like:
'C:\Program Files (x86)\Mozilla Firefox\firefox.exe' 'C:\Program Files (x86)\Mozilla Firefox\FFstartup.ini'
...and the FFstartup.ini file would look like:
[Startup]
'http://www.yahoo.com'
'http://www.google.com'
'http://www.firefox.com'
etc...
If there's no current way to do this, how would I make this suggestion to be developed?
Thank you!Use a .bat or .cmd file to start Firefox if you need more space than the target line in a shortcut allows.<br />
Separate the URLs with spaces.
start "" "C:\Program Files\Mozilla Firefox\firefox.exe" http://www.yahoo.com http://www.google.com http://www.firefox.com
* https://developer.mozilla.org/en/Command_Line_Options -
I've upgraded Xcode to the latest 5.1 Installed Command Line Tools via xcode-select --install Homebrew tells me "A newer Command Line Tools release is available"
brew --config:
Xcode: 5.1 CLT: 5.1.0.0.1.1393561416 LLVM-GCC: build 2336 Clang: 3.1 build 318
Checking my clang executable:
$ /usr/bin/clang --version Apple clang version 3.1 (tags/Apple/clang-318.0.58) (based on LLVM 3.1svn)
$ /Library/Developer/CommandLineTools/usr/bin/clang --version Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
So it appears Command Line Tools didn't install clang (and perhaps other executables) into /usr/bin? I checked my other laptop (w/ Mavericks), and /usr/bin/clang is version 5.1.
So I'm guessing this is the problem? I've tried to reinstall Command Line Tools as sudo, but now it won't let me install again (says software isn't currently available).
Can anyone help me with this? I've spent hours on it now, but can't find a solution.
ThanksBTW, I installed Xcode 5.1 from the Store, but have never run xcode-select --install. Here is the verbose output from a clang.
xew ~/$:clang -v -o hello main.c
Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
Target: x86_64-apple-darwin13.1.0
Thread model: posix
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/clang" -cc1 -triple x86_64-apple-macosx10.9.0 -emit-obj -mrelax-all -disable-free -disable-llvm-verifier -main-file-name main.c -mrelocation-model pic -pic-level 2 -mdisable-fp-elim -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 236.3 -v -resource-dir /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -fdebug-compilation-dir /Users/xew -ferror-limit 19 -fmessage-length 100 -stack-protector 1 -mstackrealign -fblocks -fobjc-runtime=macosx-10.9.0 -fencode-extended-block-signature -fdiagnostics-show-option -fcolor-diagnostics -vectorize-slp -o /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -x c main.c
clang -cc1 version 5.1 based upon LLVM 3.4svn default target x86_64-apple-darwin13.1.0
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/usr/local/include"
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/Library/Frameworks"
#include "..." search starts here:
#include <...> search starts here:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/include
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/System/Library/Frameworks (framework directory)
End of search list.
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/ld" -demangle -dynamic -arch x86_64 -macosx_version_min 10.9.0 -syslibroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -o hello /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -lSystem /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/lib/darwin/libclang_rt.osx.a
xew ~/$: -
Solaris 10 command-line argument to /etc/init.d/apache
Does anyone know how to control the command-line argument sent to /etc/init.d/apache that ships with Solaris 10 11/06?
# svcs *\apache\*
shows Solaris is running Apache 1.3 as a legacy service with the FMRI lrc:/etc/rc3_d/S50apache.
According to Sun documenation ("How to Modify a Command-Line Argument for an inetd Controlled Service" <http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5ss?a=view>), one should be able to make desired changes using the inetadm command. The problem is,
# inetadm
doesn't show anything at all related to apache or httpd. I thought about changing the inittab file, but Sun's comments in the file pretty much say "hands off."
I'm trying to have Apache SSL enabled at boot time (i.e. argument startssl instead of start). As a temporary hack, I've edited apachectl so that the "start" argument is processed like "startssl."
Thanks!tmilbank wrote:
Does anyone know how to control the command-line argument sent to /etc/init.d/apache that ships with Solaris 10 11/06?
# svcs *\apache\*
shows Solaris is running Apache 1.3 as a legacy service with the FMRI lrc:/etc/rc3_d/S50apache.
According to Sun documenation ("How to Modify a Command-Line Argument for an inetd Controlled Service" /etc/rc3 services have nothing to do with inetd.
The script is running from the above file (/etc/rc3.d/S50apache).
That's normally apache 1.x. If you do 'svcs -a', you'll see disabled services as well, which will include the apache 2.x server.
<http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5ss?a=view>), one should be able to make desired changes using the inetadm command. The problem is,
Neither version of apache runs from inetd. Are you interested in apache 1.x or apache 2.x?
Darren -
How to create Bin Release folder of my Application through command line
Hi friends
Can any body guides me how to release my flex project without using flash builder.i mean i want to create bin release folder only from dos using SDK.
is this possible?Waiting for reply.
Thanks And Regards
Vineet OshoHi Vineet,
To do what you are asking, I think you will want to use Ant from the command line (DOS). Rather than go over the details of how to do that here, the Adobe Live Docs seems pretty thorough: http://livedocs.adobe.com/flex/3/html/help.html?content=anttasks_1.html
-Mike -
Kernel parameter "init=/bin/bash" in kernelpanic
Hi,
when I try to add kernel parameter "init=/bin/bash" for maintenance
I have thi error...
kinit mounted root read only ...
bash root:/dev/hdxx nosuch file or directory
kernel panic
why ?
thankyou
Last edited by sacarde (2008-02-24 18:15:51)just ad "1" instead for booting in runlevel 1. With passing init you override execution of the scripts in initramfs which mount your / etc..
-
Networker how to change volume mode to appendable by command line
I would like to ask how can i change volume mode to appendabel for networker ebs through command line, eg . nsrjb -o nofull -S 2,
It looks like changes to the audio settings alters the com.apple.audio.SystemSettings.plist file.
You can see the difference here:
http://barbatto.com/gu/Picture_2010-01-08_at_1_50_43PM.jpg
I might be able to use "defaults write" to make the change. -
Command line display disappears during boot [solved]
I've brought my machine up to date with systemd, and have run into this latest problem. I boot with syslinux. My machine has started giving me kernel panics when I boot with the primary configuration, which had
acpi=off
in the append line, I believe to address this very problem. If I boot with the fallback, which does not have this entry, I get a boot that I can access over ssh, but the command line display disappears after running through a few lines. Commenting out the acpi language in the primary gives the same result as the fallback.
If I can't boot with it in there, and can't see the screen with it out, what do I do?
[edit]
I was looking for some information on the boot process to explain what changes during the boot to cause the screen to go from visible to invisible. When it used to boot, I remember a font change happening part way through the boot, but don't remember what caused it. Searching for the boot process on the wiki only gives the systemd page, and I didn't find anything there that was helpful in this regard.
I am downloading a live iso and will try booting with that to see if the display issues are present using that approach.
[edit]
Ok, it had nothing to do with acpi. I was running the nvidia driver. My machine has a processor with a gpu, and apparently it decided to hand off to my intel gpu, which has nothing attached to it, instead of sticking with the nvidia. May have to do with KMS (wiki.archlinux.org/index.php/Kernel_Mode_Setting). So I deleted the nvidia driver per the wiki instructions and added the nouveau driver, enabled the KMS per the instructions, and now I have a command prompt.
Last edited by timm (2013-01-11 20:13:01)i did systemd.unit=multi-user.target at the boot loader . https://wiki.archlinux.org/index.php/Systemd for more options
-
Running mxmlc from command line - unable to open file
Hello all,
Just tried to get Flex up and running - but have run into
probably a simple problem. Here's the scenario:
1. I've put the flex 2.0 installation folder on my C drive
such that the path is c:\flex_sdk_2
2. I've set my system path to reference the the mxmlc with
c:\flex_sdk_2\bin
3. I've set up a folder on my desktop for my flex programs,
creatively called 'flex'
4. From my command line I use 'xmxlc --strict=true
--file-specs filename.mxml'
My output is this:
Loading configuration file <etc>
Error: unable to open filename.mxml
As I said before, probably an easy fix but thought I'd put
something up to see if anybody knew an answer off the top of their
head? I'm running Windows XP. Home Edition, V. 2002 if it helps.
Many thanks!
ShannanNevermind, figured it out. My files had the .txt appended to
the end of the file-name.
*der* -
2911 ISM-SRE-300 CUE 8.6.7 install failure...Verifying ... Invalid signature in command line file !!
ISM-SRE-300 seems to be a loop at boot with Verifying ... Invalid signature in command line file
Any ideas?
Log
Install of ftp://*****:*****@10.100.64.21/cue-vm-k9.SPA.sme.8.6.7.pkg in progress
Install status : Waiting for RBIP registration
No localstore
2911#
[Resuming connection 1 to 10.102.66.254 ... ]
Initializing memory. Please wait...
Memory initialization OK. Continue...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
SRE step 2 - SM requests key file info...
SRE step 3 - SM stores registration info...
SRE configuration keeps the same. No flash update needed!
SRE step 4 - SM downloads key-file...
Writing keyfile to flash Size 891
writing complete.
Updating flash with bootloader configuration.
Please wait .................. done.
SRE step 5 - SM requests installer info...
SRE step 6 - SM stores installer info...
Updating flash with bootloader configuration.
Please wait .................. done.
SRE step 7 - SM now downloads installer
done.
SRE step 8 - SM requests tcl header file info...
SRE step 9 - SM now downloads the tcl header file
TCL header file downloaded completely size: 691
SRE step 10 - SM requests tcl file info...
SRE step 11 - SM now downloads the tcl file
TCL file downloaded completely size: 38933
SRE step 12 - SM now boots Installer
Verifying ... done.
Starting Kernel.
Platform: ism
INIT: version 2.86 booting
mounting proc fs ...
mounting sys fs ...
mounting /dev/shm tmpfs ...
kernel.sem = 1900 4000 32 100
vm.overcommit_memory = 1
vm.min_free_kbytes = 8192
Welcome to Cisco Service Engine
Setting the system time from hardware clock
********** rc.aesop ****************
Populating resource values from /etc/ism_rsrc_file
Populating resource values from /etc/default_rsrc_file
Populating resource values from /etc/products/cue/default_rsrc_file
Populating resource values from /etc/products/cue/ism_rsrc_file
==> Management interface is eth0
==> Management interface is eth0
IOS IP Address Registration complete.
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.102.66.0 * 255.255.255.0 U 0 0 0 eth0
default 142.102.66.254 0.0.0.0 UG 0 0 0 eth0
Size of buff is: 65536
65536 bytes written
Valid License file not found: Using default values
INIT: Entering runlevel: 2
********** rc.post_install ****************
Changing owners and file permissions.
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: dwnldr_startup.sh
sre_type= 1
Welcome to Cisco Systems Service Engine Helper Software
Downloading ftp cue-vm-k9.SPA.sme.8.6.7.pkg
Bytes downloaded : 727736
Validating package signature ... done
- Parsing package manifest files... complete.
No installed manifests found.
- Checking Package dependencies... complete.
Downloading ftp cue-vm-langpack.sme.8.6.7.pkg
Error: Download error
Can not download cue-vm-langpack.sme.8.6.7.pkg
error code 550 : error type 'Can not ▒
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...ISM-SRE-300 seems to be a loop at boot with Verifying ... Invalid signature in command line file
Any ideas?
Log
Install of ftp://*****:*****@10.100.64.21/cue-vm-k9.SPA.sme.8.6.7.pkg in progress
Install status : Waiting for RBIP registration
No localstore
2911#
[Resuming connection 1 to 10.102.66.254 ... ]
Initializing memory. Please wait...
Memory initialization OK. Continue...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
SRE step 2 - SM requests key file info...
SRE step 3 - SM stores registration info...
SRE configuration keeps the same. No flash update needed!
SRE step 4 - SM downloads key-file...
Writing keyfile to flash Size 891
writing complete.
Updating flash with bootloader configuration.
Please wait .................. done.
SRE step 5 - SM requests installer info...
SRE step 6 - SM stores installer info...
Updating flash with bootloader configuration.
Please wait .................. done.
SRE step 7 - SM now downloads installer
done.
SRE step 8 - SM requests tcl header file info...
SRE step 9 - SM now downloads the tcl header file
TCL header file downloaded completely size: 691
SRE step 10 - SM requests tcl file info...
SRE step 11 - SM now downloads the tcl file
TCL file downloaded completely size: 38933
SRE step 12 - SM now boots Installer
Verifying ... done.
Starting Kernel.
Platform: ism
INIT: version 2.86 booting
mounting proc fs ...
mounting sys fs ...
mounting /dev/shm tmpfs ...
kernel.sem = 1900 4000 32 100
vm.overcommit_memory = 1
vm.min_free_kbytes = 8192
Welcome to Cisco Service Engine
Setting the system time from hardware clock
********** rc.aesop ****************
Populating resource values from /etc/ism_rsrc_file
Populating resource values from /etc/default_rsrc_file
Populating resource values from /etc/products/cue/default_rsrc_file
Populating resource values from /etc/products/cue/ism_rsrc_file
==> Management interface is eth0
==> Management interface is eth0
IOS IP Address Registration complete.
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.102.66.0 * 255.255.255.0 U 0 0 0 eth0
default 142.102.66.254 0.0.0.0 UG 0 0 0 eth0
Size of buff is: 65536
65536 bytes written
Valid License file not found: Using default values
INIT: Entering runlevel: 2
********** rc.post_install ****************
Changing owners and file permissions.
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: dwnldr_startup.sh
sre_type= 1
Welcome to Cisco Systems Service Engine Helper Software
Downloading ftp cue-vm-k9.SPA.sme.8.6.7.pkg
Bytes downloaded : 727736
Validating package signature ... done
- Parsing package manifest files... complete.
No installed manifests found.
- Checking Package dependencies... complete.
Downloading ftp cue-vm-langpack.sme.8.6.7.pkg
Error: Download error
Can not download cue-vm-langpack.sme.8.6.7.pkg
error code 550 : error type 'Can not ▒
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Authenticating boot loader....
Secondary Boot Loader authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialze network device
Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait .................. done.
Loading disk:/bzImage ... Loading disk:/cmdlineextra ... done.
Verifying ... Invalid signature in command line file !!
Corrupted command line detected
done.
Starting Kernel.
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor 1.06GHz
BIOS ISM 2.6, BIOS Build date: 10/16/2009
System now booting...
Maybe you are looking for
-
How do I share my Library with my Wife?
Another obvious question, but for the life of me I cannot see how to share my complete library. I am not talking about selecting photos to publish between family members ... I would use fakebook or other social media for that ... this is simply how d
-
20GB ZEN firmware problem! pls help me someone...
hi there my 20GB zen is saying it has a firmware problem... i have tried to fix it by reloading the firmware again but it is not even recognising that it is connected... i am not that good with computers so if anyone has any suggestions i would reall
-
OT: Site works fine on Win2K IIS5 - throws an error on Win2K3 IIS6
Hi, I've had serious server trouble and have moved some sites to a new Win2K3 server running IIS6. Of the sites that have been moved (all of which were working fine prior to moving), one now gives me this error: Active Server Pages error 'ASP 0116' M
-
Explorer folder update issues Server 2008 R2 Terminal Server
Hi Folks, We are having a few issues here. We have a cluster of 5 Server 2008 X64 R2 SP1 Terminal Servers running Citrix Xenapp 6. Our file server is a Server 2008 R2 SP1 server also. All servers are virtualised on ESX vSphere 4.0 and are connected
-
Old Generation not cleaned after Promotion Failure
Hello, Using Java 1.6.0_29 with a 45GB heap, we occionally see promotion failiures like this 2012-03-28T07:37:00.939+0200: 484094.380: [GC-- [PSYoungGen: 14615647K->14615647K(14615680K)] 44825709K->46072922K(46072960K), 154.0113697 secs] [Times: user