Apple 23" Cinema Display problem

I have a smudge like line about 3 inches long running down my display. It isn't anything on the screen because I have cleaned it multiple times. On certain colors it really shows up and it annoying. It looks like if someone took an eraser and put a light smudge down the screen. Is this a pixel problem?
Anyone have any help or suggestions on how to fix this?
Thanks,
Steve

Well, without having seen the actual display in question it sure sounds like you are entitled to a replacment unit! A couple of dead pixels i assume we have to live with but your "problem" sounds like a really annoying one and certainly something which should not be accepted on a display at this price. I would call Apple or any reseller you purchased the equipment from
PowerMac G5 dual 2.3ghz   Mac OS X (10.4.6)  

Similar Messages

  • Older Apple HD Cinema Display is detected but no picture

    Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
    Yet.
    So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
    Everything was working fine and I was video editing and Photopshopping to my hearts content.
    I had noticed that recently the display would not come back from sleep without rebooting the computer.
    So that might have been an early clue.
    Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
    I rebooted the computer. This time the monitor displayed black and white vertical lines.
    "Oh joy," thought I.
    I rebooted again.
    This time nothing but the heart of darkness.
    Nothing.
    I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
    I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
    The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
    I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
    I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
    So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
    Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
    Many thanks.
    And good karma to all who give it a head scratch.
    A

    Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
    Good to know I'm not the only one, thanks for posting.

  • Apple 23" Cinema Display - lines around windows

    I have the Apple 23" cinema display and now I'm seeing "ghost lines" around open windows on the desktop, and also along the sides of application windows, like Safari. What is causing this?

    having the same problem, you can see right through to other open windows ie. photoshop/acrobat documents. not very good when retouching images etc.

  • New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

    I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
    Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
    PS - I keep my MacBook Pro lid closed when using the display.

    Is your 2.6 the CTO upgrade from the high end 2.3 15"?
    Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

  • Apple HD Cinema Display not working

    Hello everyone, I bought a used Apple HD Cinema Display a few months ago and I have been using it with no problems in Leopard with my white macbook (late 2007). I have recently installed XP using bootcamp (the display was not connected at the time of install) and now I am unable to get the display to work in XP. All I get is a black screen. Can anyone help me with this please? Are there any drivers that I may need to install in XP to allow it to work?
    Thanks!

    Try WinACD
    <http://sourceforge.net/projects/winacd>

  • HT2810 Apple HD Cinema Display will not come back on after brief power cut.

    My Apple HD cinema display won't come back after a brief power cut.
    There is the little white power light on the front which pulses on three times and then extinguishes, repeatedly.
    The Mac itself seems to power up although it's hard to tell if it's bboting properly, as I cannot see anything on the screen.
    There is power going to both units so I have no idea what is happening.

    This sounds like a very common problem.  If the blinks are one short, one longer, one short..... long pause... repeat.... start searching this forum.   There are also Youtube videos on solving it.  If this is the problem, the solution is easy.  You block both center pins on the 10 pin power connector.   Its crazy but it works.  
    https://discussions.apple.com/thread/2086442?start=30&tstart=0
    http://www.youtube.com/watch?v=vodDfic8omA
    I just used a very thin strip of paper folded in half and slipped into the display's connector so it covers ONLY the two center contacts, then slip it into the power module very carefully.  Make sure there is some slack in the paper as otherwise it will tear and the contact will still be made.  If it doesn't work at first, try again as the paper made have torn in process.   It would be better to use something stonger like a very thin strip of mylar.   Or you can do what the video shows, but I didn't try that exactly.

  • Annoying Screen saver/Login window/Apple LED Cinema Display Bug

    Hi all,
    After upgrading to 10.6.4 I have a really annoying problem.
    First the relevant setup information: MacBook Pro 17 inch (2009 model), 8 GB RAM, 10.6.4, Screen saver activates after a few minutes with password protection and a few minutes thereafter the screen is put to sleep.
    Here is what happens: whenever I have an external Apple LED Cinema Display connected and I move the mouse while the screensaver is activated, I am able to type my login and password, but after that in just a matter of seconds (usually 3-4 seconds) the both screens become blue and all my programs close and Mac OS X jumps to the login screen (all data that was not saved is gone, all open windows also gone). This bug does NOT happen if the Apple LED Cinema Display is not connected.
    Anyone else experiencing this issue?
    Best Regards,
    Michael

    Hello guys, thank you for answering.
    Yes, the USB cable is plugged.
    At the moment I'm avoiding to flash the VRAM. But I found out that restarting my system gives me access to the controls again. It does randomly stop working. Sometimes I can adjust the cinema display settings but not the macbook screen settings. In my opinion it is definitely a bug.
    There is any way to submit a bug somewhere?

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

    My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
    I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
    Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

    To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
    The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • How do I connect  Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

  • Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

    I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • Mini DisplayPort adapter for 23" Apple HD Cinema Display?

    hello all,
    I'm sure this has been asked and answered here, but I can't find it! (grrr...)
    I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. The WIKI thing about DVI calls it a "DVI M1-DA (Dual link + USB)".
    http://en.wikipedia.org/wiki/DigitalVisualInterface
    For the life of me, I can't find an Apple (or other) adapter with the 10-pin connector to attach to the iMac?
    many thanks,
    b myers

    If it's the old, plastic cased, 23" display, it may use ADC (Apple Display Connector).
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    In that case, you will need a DVI to ADC adapter
    <http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTA4MzU1OTI>
    in addition to a Mini DisplayPort to DVI adapter/

  • VMware Fusion and Apple LED Cinema Display

    I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
    I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
    1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
    2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
    3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
    4) The resolution ia 1277 x 1234. That is weird.
    5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
    Something is wrong, Any help in fixing this would be greatly appreciated.
    Bryan

    you have to separate out what is Fusion and what is Windows native.
    Even doing updates to Windows sometimes should not or cannot be done properly in VM.
    And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
    Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
    You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

  • USB Speaker/LED Cinema Display Problems After Upgrade to Mavericks

    I just upgraded to Mavericks this morning.  My set-up includes a new (Late 2013) 27" iMac and a 27" Apple LED Cinema Display, with the mini display port and USB connected from the display to the iMac. 
    I have a set of Bose USB speakers that I had plugged into the USB port on the Cinema Display for audio.  I didn't want to waste one of the USB 3 ports on the iMac so instead was using a USB 2 port on the Cinema Display.  This worked fine before upgrading to Mavericks.
    Now with Mavericks installed, if I have the speakers plugged in, I get a tone that sounds like very loud feedback.  If I plug the USB speakers into one of the USB 3 ports on the iMac however, it works fine.
    Does anyone know if this is a known issue with Mavericks?  I've read some other posts about display issues, but they were referencing USB displays.  In this case the display is connected via mini displayport, but the USB connection on the display seems to be causing issues.
    Anyone else experienced this?

    I've been experiencing additional issues with USB speakers. I plugged them into a USB port on the iMac itself (as opposed to the LED Cinema Display) and the feedback was gone.  However, now I get situations where the audio appears to randomly "die" on the system.  If I go into Audio preferences and switch the audio output to the internal speakers, the audio comes back on.  If I then switch it back to the USB speakers, it continues to work until it randomly dies again.  This happens typically 3-5 times a day.
    If I just use the internal speakers as the audio output, I don't get any issues with losing the audio.  The USB speakers worked fine on the iMac before upgrading to Mavericks, and still work fine on my late 2011 MBP still running 10.8.5. 
    I've read about other similar issues (http://www.imore.com/losing-audio-os-x-mavericks-heres-what-you-can-do-about-it). Still waiting for a fix.

Maybe you are looking for