Apple 30 inch cinema display

What video card would work best with the 30inch display and Gateway PC?

If its a year old it'll probably have a PCI-Express slot, but you'll have to find out for sure if your system has AGP or PCI-Express.
I don't know what your current graphics card is or needs for a graphics card will be, but these has two dual link DVI ports.
Radeon X1650XT 256MB 128-bit GDDR3 PCI Express x16 Retail.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814161054
Another Radeon X1950PRO 256MB 256-bit GDDR3 PCI Express x16
http://www.newegg.com/Product/Product.aspx?Item=N82E16814102061R
But thats OEM which is just the card itself.
G5 Dual 2.7   Mac OS X (10.4.9)   ACD 30" & 23"

Similar Messages

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

    I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • Can i use Apple 2005 20-inche cinema display on Mac pro ?

    can i use Apple 2005 20-inche cinema display on Mac pro ?

    If the display has a DVI connector it will plug into the Mac Pro directly.  If it uses ADC (Apple Display Connector)
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will need a DVI to ADC adapter
    <http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

  • Difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)?

    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different. Its so confusing! I want to purchase a secondary display for my 21" iMac, but idk the difference between the two.
    furthermore, another question i have is, is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    please help, thanks!

    rae90 wrote:
    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different.
    One has thunderbolt capabilities, the other doesn't.
    is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    No you can get a larger one.  Maybe not an Apple one, but certainly another brand.

  • Old 2006 MBP and connecting it to new 24 inch Apple LED Cinema Display

    I really need to know which adapters in order to get my MBP does not have a mini DVI port it has the first version of the port but right now I'm getting confused in which adapter to get so it will work with the Apple LED Cinema Display???
    hopefully someone knows
    Thanks

    There is no compatible adapter at this time.
    (37325)

  • How to connect multiple Apple LED Cinema Displays to MacBook Pro

    I have an Apple 24 inch LED Cinema display that I run from my MB Pro. I mainly use the MB Pro+ screen for document editing.
    I would like to run a second Apple 24 inch Cinema display from the MB Pro. I am presently running another monitor successfully via a Dynalink USB splitter but would really prefer to run a second Apple monitor. I have enquired at two Apple Stores and browsed lots of sites. Multiple monitors from MB Pro seems ok (as long as it's not two Apple monitors). I would be surprised if Apple is content to pass up the opportunity to sell more of these superb screens.
    Grateful for any advice and suggestions

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

    Hello,
    I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
    I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
    Does anyone know if this is possible? Or does it only work with another Cinema Display?
    I'd appreciate any help received.
    Thanks,

    Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
    That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
    I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
    That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
    But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
    Not unless the PC has Thunderbolt.

  • Older Apple HD Cinema Display is detected but no picture

    Forgive me, as I know this is an often-asked question but I have searched and can't find a response that fixes the issue.
    Yet.
    So I have a Mac Pro (circa 2008) that works fine. The Apple Cinema Display is even older from about 2004 (I think).
    Everything was working fine and I was video editing and Photopshopping to my hearts content.
    I had noticed that recently the display would not come back from sleep without rebooting the computer.
    So that might have been an early clue.
    Then this morning I came home from taking the kids to school and the Mac Pro fan was running loud and no image on screen.
    I rebooted the computer. This time the monitor displayed black and white vertical lines.
    "Oh joy," thought I.
    I rebooted again.
    This time nothing but the heart of darkness.
    Nothing.
    I reseated the video card (as that has been a culprit in the past) and rebooted. Still no image. Did all the PRAM, unplugging the computer, waiting a minute plugging back in, plus all the other keyboard tricks one reads about. Still no joy.
    I then tried the monitor on my MacBook Pro to see if it was a computer issue or monitor issue. No image from the MacBook Pro either.
    The Macbook Pro did detect the display though and showed it along side theMacbook Pro screen is the Display Prefences.
    I also ran the MacBook Pro in Traget Mode to the laptop so i could run diagnostic checks and repairs uisng Apple Utilities and Disk Warrior. No problems were detected on the Mac Pro (tower).
    I then connected a Samsung monitor (that the kids watch Netflix on) and that worked fine on both the laptop and the Mac Pro tower.
    So I have isolated the cause to the Apple HD Cinema Display. The video card and other hardware tested out fine.
    Any thoughts on a fix or what the issue might be?. I can get by with Samsung as I am on deadline - but would rather have my trusty Apple Cinema screen back.
    Many thanks.
    And good karma to all who give it a head scratch.
    A

    Yeah I use my screen saver more often now and yes it's the white windows and desktop icons that ghost the most not horrible and my warrant is a few years past. The genius is wrong to accuse you that's just plain silly. The first apple 30 inch I bought had green lines and after a few trips to the store they sent it off to be repaired but in the end I think I got a different monitor back. Three and a half years later this started to happen. It's like short term burn and it's pretty subtle. I'm an audio guy so if I were a graphics person and this was my main rig I would be more upset. I just hope it does not continue to get worse. I have an older 22 inch with the clear plastic and it does not have the issue. It only starts to do it after it's been n for few hours.
    Good to know I'm not the only one, thanks for posting.

  • Random screen blackout 2009 24 inch Cinema Display... HELP.

    Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

    I have a 30-inch cinema display connected to a Mac Mini.  When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time.  If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once.  It works fine once it on and displaying.  Anyone else seeing this?
    Rocketman

    Hi Rocky Rakoon,
    Thank you for your post, and welcome to the Apple Support Communities.
    I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    For more troubleshooting directly related to the Cinema Display, see this resource:
    Apple Cinema Display: Troubleshooting steps
    http://support.apple.com/kb/HT2810
    Thanks,
    Matt M.

  • 32 inch Cinema Display turns off repeatedly?

    32 inch Cinema Display has taken to turning itself off afer 30 minutes operation.
    Can this fault be repaired or should I be looking at buying a new display?

    I have a 20" Cinema Display connected to an early 2008 MacPro. After years of service the monitor suddenly started going black, quite randomly. It would even happen part way through playing an edit from FCP. Strangely audio would be maintained though picture was lost. If I switched monitor power off and on again I would usually restore video image. Sometimes I had to do this power cycling repeatedly.
    Looking through other posts it seemed a failure of the internal power unit was the most likely cause of the problem. But replacement seemed risky and not guaranteed. I considered buying a new monitor (probably a Dell UltraSharp since the Apple monitors are now so expensive).
    Then I tried something else. In System Preferences and then Energy Saver I set the Computer Sleep slider to 25 minutes (I had always previously kept it on 15 minutes). Bingo! Problem solved.
    Maybe this won't work for everyone but it certainly saved me some cash outlay. For now.

  • What happened to the 30 inch Cinema display?

    What happened to the 30 inch Cinema display?
    I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
    I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
    Any suggestions, for a 30 inch display?

    No suggestions, apart from changing to a non-Apple display such as a LaCie one.
    I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
    1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
    2. we have gotten used to 30" and do not want to downgrade.
    I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
    I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
    Suzanne

  • MBP3.1 can't run 30-inch cinema display

    I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
    I've had  Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
    Has anyone else had this problem?

    You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

  • My 24 inch cinema display stopped working

    My 24 inch cinema display just flickered and stopped working.  The power is still there, the sound is still their.  isight camera doesn't appear to be on, the screen is black.  My display window in settings still reconginizes another display, but the screen is just black.  I've tried all the normal trouble shootings, ie resetting the SMC, and PRAM, but no luck.  I have never had any problems with it at all.  Any help would be appreciated.

    If restarting Mac and trying the suggestions in
    LED Cinema Display (24-inch, Late 2008): Basic troubleshooting
    don't help you, Contact Apple Displays Support.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

Maybe you are looking for

  • Conditionally Color a row based on the Day of the Week for that row ?

    Hi, I have a Table containing some timing entries for each day. I have been trying to format some rows depending on a value in one of the columns for that row. What I would like to achieve is color the cell background gray for every row where the Dat

  • Uploading data from a particular column of a particular sheet from an excel file into internal table

    Hi, I have to upload data in the first coulmn of 7th sheet of an excel file. Can anyone please help me on this. This link works perfectly fine for excel files without Macros. Read multiple sheets of an Excel file into SAP through ABAP - Code Gallery

  • Command for calculating the difference between channel points

    Hello guys, Please tell me if there is a command (or a way) to calculate the diference between channel points, and when there is a diference between points greater then a certain value, to give you where are those points. I record some CSV data, a fo

  • English language text with Hebrew language text ?

    Hi, We are using Hebrew language SAP script. In that if we are using any english text mixed with hebrew then english words are disorder. Please let me know if there is any solution for this. Thanks Venkatesh P

  • Create a test database?

    Hi to all, Which is the best way to create test database on different server? I have Data Pump full export and RMAN backup from production database. The test database I want to be on same OS (Windows Server 2003 64bit) and same version/release of Ora