Apple Application Support was not found help!!!!!

A few days ago i got on iTunes but this error message came up saying
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall
iTunes, then install iTunes again.
Error 2 (Windows error 2)
I have looked at many discussions and forum posts and most of them say to extract the itunes setup with winrar
but i cannot see where it says to extract all i see is add to and compress.
Please help me!!! I run windows 7 on an Acer laptop if this means anything. It would be highly appreciated thank you!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Similar Messages

  • HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • Cannot install ITunes--Mesage is "Apple Application Support was not found.  Apple application Support is required to run ITunes Helper.  Please uninstall ITunes, then install ITunes again.  Error 2 (Windows Error 2)

    Cannot install ITunes--Mesage is "Apple Application Support was not found.  Apple application Support is required to run ITunes Helper.  Please uninstall ITunes, then install ITunes again.  Error 2 (Windows Error 2)

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice.  What now?

    When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message.  What now?

    Hi texasslagle,
    It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
    There is an article that you may want to use to try to complete your install here -
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes and then install iTunes again. Error 2.   After this I

    So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
    Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

    Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer 

    Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
    tt2

  • It says this when I try to open iTunes:  Apple Application Support was not found.   Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.   Error 2   I've tried uninstalling it and installing it several t

    It says this when I try to open iTunes:
    Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
    Error 2
    I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FD

    You have missing information in your Windows programming. 
    You need to repair your computer so it can run iTunes.  If you plug those error codes into your browser you may get an answer.

  • ITunes wont load Apple Application Support was not found

    I have been having a lot of trouble downloading itunes. I had it on my laptop and then the laptop crashed. I tried to re-install,and it goes smooth then at the end. I get a window message that has a red and white X that says:
    Apple Application Support was not found
    Apple Application Support is required to run iTunesHelper. please unistall iTunes, then install iTunes again.
    Error 2
    ok
    Can anyone help me PLEASE?
    Thanks

    With that one, let's try uninstalling both iTunes and Apple Application Suppport. When we reinstall iTunes, that should reinstall Apple Application Support as well. We'll take a few additional explicit precautions along the way too. Best to print these instructions out, because at one stage of proceedings you won't be able to use a web browser.
    Preliminaries
    Download and save a fresh iTunes installer to your hard drive. (Don't run the install on line and don't start the iTunes install just yet.)
    http://www.apple.com/itunes/download/
    Now, quit QuickTime (if you have that open) and Safari 4.0.4 (if you have that installed and open). Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open.
    *Uninstall phase*
    Head into your "Add or Remove Programs" control panel. Uninstall iTunes. Uninstall Apple Application Support (if it is listed in there).
    (From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
    Next we'll remove any leftover program files and folders.
    (1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
    (2) Open the "Program Files" folder.
    (3) Right-click on the iTunes folder (if it still exists) and select "Delete".
    (4) Open the "Common files" folder.
    (5) Open the "Apple" folder.
    (6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
    Now empty your Recycle Bin and restart the PC.
    *Reinstall Phase*
    After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
    Now start the install by doubleclicking the iTunesSetup.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.
    Did the install seem to go through okay? If so, does iTunes start launching properly again?

  • Apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2

    I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
    "apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanks

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Apple Application Support was not found on new itunes update.

    I have unstalled and installed the newest itunes update about 10 times now.  I still get (in itunes and itunes helper) "Apple Application Support was not found. Apple Application Suport is required to run itunes".  Please uninstall itunes, then install itunes again.  Error 2 (Windows error 2)".
    Can someone please help ! ! !
    Desperate Dave

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • Apple application support was not found windows error 2 when downloading itunes

    I have been trying to download itunes after not using it for at least 2 years. I am getting the message  "apple application support was not found - windows error 2" Can anyone help - I can't play my songs at all!!
    Trudy

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows 7 - Apple Application Support was not found.  Error Message

    Hello Folks,
    i keep getting the following message, despite the fact that i have uninstalled Itunes and then installed it again a few times.
    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Can anyone suggest any help?
    I have a Windows 7, new Dell Latitude machine.
    THank you,

    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Is Apple Application Support currently showing as installed in your Uninstall a program control panel?
    If not, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.

    I need help! I got my new iPod and I need to install iTunes on my laptop because I didn't have it before. I install it and I go to open it and it says "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again." I've done that three times and it does the same thing... WHAT DO I DO???

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Keep being met with the same error sign: 'Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstal iTunes, and install again. Error 2'

    iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error  'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??

    Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
    Uninstalled /reinstalled
    Disconnected all firewalls and antivirus and even uninstalled them with Revo..
    with that effort..I then used winrar to extract to a file and manually install each piece..
    all load EXCEPT Apple Application Support..but only if I do it manually..
    Quicktime had to be manually installed.
    Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
    Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
    Windows Installer likes to quit alot..not sure how to fix that..urgh
    Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
    Any help is much appreciated!

Maybe you are looking for

  • A/R Invoice+payment error

    Hi, when i go to create a a/r invoice + payment for one time customers, I get an error message which says default business partners for invoivce and payment not defined message 439-39. I know we have to do initial settings. I created a default custom

  • N80 4.0623.0.42 Fixes?

    Can anybody please tell me what this latest version of the firmware fixes. I have upgraded my 02 N80 this morning in the hope that it may fix some bluetooth problems I have but would like a list of bug fixes if possible. Thanks in advance Raj Nokia N

  • Include a report in another report - URGENT!

    Hi all I generated 5 reports with Oracle Reports 9i and now I want to manage it as I wish in order to generate a single file (one single big report) as an output. Can I include one or more reports (.rdf, .rep, .....) inside another report (a wrapper

  • Flex Ant html-wrapper task

    http://labs.adobe.com/wiki/index.php/Flex_Ant_Tasks Isn't there a way to use a CUSTOM template instead of one of the predefined ones? If you want to add anything additional, like telling the browser not to cache the swf, or detecting when the browser

  • Error in printing PO

    hello,           I want to print PO.....when i get print priview in me23n then i get all windows.....but when i get print out from me9f that time one window is getting masked.....Please guide me.......                 Can we take print out from me23n