Apple Bluetooth Mouse won't work in Bootcamp Windows XP

I just purchased a new MacBook at The Apple Store and they installed Boot Camp with Windows XP for me. I also purchased an Apple Blue Tooth Wireless Mighty Mouse. The Blue Tooth mouse works just great on the Mac side, but it will not setup and install on Windows. The Wizard Setup finds the mouse just fine and it looks like everything has gone smoothly until about the very last last step. It gets hung up on the 'Passkey.' It doesn't matter what I check when it asks for a passkey...no passkey, set your own passkey, use passkey that came with mouse, etc. It doesn't like anything that I put in. At the end, I get the following message: "Windows was unable to exchange passkeys with your device. The device has indicated a passkey exchange failure." No passkey came with the mouse. I thought I would check here today for any ideas on what to do, but will take it into the Apple Store this week if necessary to see if I can resolve the issue. Thanks!!
Sunny

Hello,
Try the suggestion on this thread: http://discussions.apple.com/thread.jspa?messageID=7475107
Here also: http://forums.macrumors.com/showthread.php?t=630024
Carolyn

Similar Messages

  • Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
    so there's a faulty component or connection
    from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

  • Bluetooth mouse won't work in windows

    I have a microsoft bluetooth notebook mouse 5000 that works well in mac osx but when I go to windows 7 in bootcamp it reports that the bluetooth hid device driver is not working and the mouse won't work.
    I can get it to detect the mouse and try to load the driver but then it says that the driver installation did not work.
    In device manager the bluetooth hid device has a warning icon next to it and it says that the device is not working.
    When I try to use my magic mouse in windows the same error happens and it says that the hid bluetooth device driver is not working.
    Both mice work fine in mac osx and the microsoft mouse was working ok in windows until last week.
    Since then, my son installed a couple of games in the windows side and the mouse started acting up the following day.
    Any advice would be very appreciated. Thanks.

    Hi!
    I suffered this problem time and time again, I kept on pairing/un-pairing/re-pairing etc. and then for no reason at all it suddenly worked. What happened I do not know. Be patient. First off use a wired keyboard and wireless mouse and if that works stay with it for a while. Then try both wireless. I found my mouse was more temperamental than the keyboard. You may have to try wireless keyboard and wired mouse (USB into the computer direct).
    Good luck let me know how it goes.

  • Why Apple Thunderbolt Display won't work on BootCamp Win7 64-bit while being plugged to MBA?

    Hello,
    I have MBA (latest) & installed win7 64-bit in BootCamp, I do also have Apple Thunderbolt 27" Display.
    When I disconnect the ATD and re-connect it in Mac OS X, it works fine like a charm, but when I disconnect then re-connect in BootCamp, it doesn't work at all whatsoever, in fact, I have to restart my MBA (while thunderbolt is connected) to make it work in BC, this is the only way to make it work.
    So, my question is; If I disconnected ATD in BootCamp then re-connected it, why it won't work?
    I've googled everywhere about this issue, but no luck.
    Any idea?

    to calculate how much video ram is needed one
    take
    the vertical number of pixels and * with horisontal number of pixels and * with 32bit colour which is 4 bytes
    so if it's the 13" macbook air
    1440 * 900 * 4 = 5.184MB for main display
    +
    2560 *1440 *4 = 14.75MB for second display
    sounds like the intel hd 5000 would have that as dedicated memory even if the windows driver did not allow to use shared system mem as extra
    could be a problem with the driver for windows
    maybe a person who ran a setup like yours would have more to contribute with
    my setup is an imac 21" with amd video card and a 24" dvi dell monitor and that works fine in windows so it's a different animal altogether

  • Bluetooth Mouse Model No.A1197 and BootCamp Windows XP Pro

    I used BootCamp to partition my iMac 24 inch late 2009 model between Snow Leopard 10.6.6 and Windows XP Pro. The wireless mouse works fine on the Apple side but I can't get Windows to even recognize it. Any suggestions, other than buy a wired mouse?

    Did you install the latest bootcamp drivers on the windows side? I have a macbook pro(12/2010) and the magic mouse works in win 7. The only thing that is not functional is swiping.

  • My apple bluetooth mouse is not being recognized by my macbook air - and it was yesterday!

    My apple bluetooth mouse was working perfectly with my macbook air until I had to change the batteries.  Now it is not discoverable and I really can't operate without a mouse.  I tried another logitech usb mouse and that was not discoverable either.  Please help!

    Today, when I turned on my iMac, neither my bluetooth mouse or keyboard were recognized. I had to connect my old USB keyboard-mouse to type this message.
    And yes, I restarted my iMac, didn't help.
    Can someone help?
    PS: Barry, "resetting SMC" doesn't help

  • My magic mouse won't work.

    I got a low battery warning yesterday & went to change then today. Well, one of the batteries had exploded. I cleaned the area as best I could (it even ate through the cover) but the mouse won't work with the new batteries. Did the acid "kill" my mouse or is it just time to replace it? I got the Magic Mouse right after they came out.

    I already cleaned the contacts before I posted. I would think my Magic mouse would last longer than a couple years. I am going to take the remaining package of batteries back to Costco as they are supposedly good to 2016. I will take the magic mouse too so they can see the damage. Now, If I can only get my bluetooth "Mighty Mouse" to pare with my iMac I would be happy. Good thing I have my laptop!

  • Using an Apple Bluetooth mouse with a pc

    Is it possible to use the Apple Bluetooth mouse with a pc and windows XP using WIDCOMM. I've tried to connect mine and although the pc sees the mouse, it tries to pair using a security code. This is despite the fact that it later says a security code is not required! Anyone got any experience of this?

    Problem solved. Security code 0000 entered, mouse paired with pc and everything worked beautifully.

  • Magic Mouse won't work in Windows 7 anymore

    Hey there,
    I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
    Note: I am running Snow Leopard, NOT Lion.

    Hi bsruff,
    If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
    Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
    http://support.apple.com/kb/TS3092
    Regards,
    - Brenden

  • Opinion on Mighty Mouse & Original Apple Bluetooth Mouse

    I just received my bluetooth Mighty Mouse today and I have to say it's an excellent mouse!
    Pros:
    Compared to the original Apple Bluetooth Mouse, this one is lighter (much lighter). It also tracks better than the original Apple Bluetooth Mouse. My desktop is a piece of grey plastic and with the original mouse, it was not able to track at all. With the new wireless Mighty Mouse, it works just fine!
    I also love how one can zoom in by control-scrolling. Excellent feature!
    Almost everything works well.
    Cons:
    Like others have said before, the one minor complaint is the side squeeze buttons. Only if the squeeze buttons were just slightly less tight. But I would not say this negative is any reason to not get the Mighty Mouse.
    Also, unlike the original bluetooth mouse which has a slider to adjust the pressure of the click button, this one does not come with that feature. Not a big deal, nevertheless.
    Good job, Apple!

    It's not for any help, but me too have the same problem.
    My mighty mouse, lose connection in a random way with my MacBook Pro 17" Unibody.
    I've an iMac at home, with another mighty mouse, so I try to exchange the two, but any one of the two mouse work right with the iMac and have the same problem with the MBP.
    Maybe for 1/2 day, there is no problem, and after that in an hour the lose connection happen 2/3 times.
    I try like you to delete the .plist file and reset PRAM but the only difference is that now the bluetooth icon in the menu bar correctly shows the three dots of the connection, but as always at random, the mouse stops working and the pointer remains stationary on the screen.
    The only solution is to manually disconnect and then click a button on the mouse to reconnect.
    My only hope is that with the arrival of Snow Leopard and the next "clean installation" the problem disappears.
    I'm sorry can't give you any help.

  • Any issue about Apple Bluetooth mouse ???

    Hello there
    I was reading so many issues about the Apple Bluetooth mouse in the Apple Store page for this item.
    I was reading it because i want to change my Kensington PilotMouse for the Apple mouse. Actually i have so many issues with the PilotMouse, like the lately wake up on the sytem startup, battery eater and so many times work in slowly way.
    I don't want nothing of this with the Apple mouse and i read all of this in the feedback pages. I love the 3 buttoms from the PilotMouse but i prefer the technically "no problem way" from Apple.
    Any of you know any issue about the Apple Bluetooth mouse (before go to store for one) ???
    I have a good experience with the Apple Bluetooth keyboard (i have one), but i don't know nothing about the mouse.
    Thanks for any recommendations or comment about this item.

    Hello junihh:
    I use one myself and it has performed flawlessly. I have no other data except my personal experience.
    If you scan this forum, you will find posts about problems. Those are not representative - only people with problems post.
    Barry

  • In Macpro mid 2010 system, after updating 10.7.5 bluetooth mouse does not work

    After System updating bluetooth mouse is not working ,please give the suggetion.

    My suggestion is please post in the correct forum, this is a forum for iMac's. The Mac Pro forum is listed at:
    https://discussions.apple.com/community/desktop_computers/mac_pro

  • Airport Locks with non-Apple Bluetooth Mouse

    I have an iBook 12" G4 1.33GHz 1.5GB RAM, internal Airport Extreme, Bluetooth, etc.
    I have tried several non-Apple Bluetooth mice and they create the same problem: Airport stops working and when I put the mouse pointer on the menubar Airport icon it turns into a spinning disk. I have looked in the log files but can't see anything useful. I have to reset the computer to get it to work properly again. If I use an Apple bluetooth mouse this does not ever happen. I am trying to use the same Logitech mouse that I have used perfectly well for over a year on my Apple Mini G4.
    Any ideas anybody?
    Nick
    SW England
    All sorts Mac OS X (10.4.9) 4 bits are in a nibble

    Try configuring your base station to operate on a different channel. Change the channel until you find a channel that works better or you run out of channels.

  • Really slow and jerky cursor with my apple bluetooth mouse, can you help?

    hey.
    i have the apple bluetooth mouse and keyboard, they were working perfectly (keyboard still does) until they ran out of batteries one day. i reverted to the wired set up and (lazily) didn't get batteries for a while (month or so). When i did the keyboard responds as before but the mouse is painfully jerky and slow. i have re-paired the mouse and changed the batteries twice, it is so annoying i now use the bluetotth keyboard and wired mouse. any advice/suggestions gratefully recieved.
    many thanks.
    james

    it is so frustrating isn't it. i now sit looking at the bluetooth mouse whilst getting tangled up in the cable of the wired mouse!! i was going to buy the new wireless mighty mouse hoping that that would solve/bypass the problem but reading what you have all put is definately making me wary of that. it seems so simple doesn"t it, nice uncluttered desk, pretty foolproof technology. if only... seems that no matter how clever these things get they are still not smart enough. i have been looking elsewhere for solutions but no luck as of yet, if i find any i'll let you know.
    regards,
    james

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

Maybe you are looking for

  • How to allow user refer back to lecture when they are taking a quiz?

    Hi everyone, I'm new to Captivate and now I am kinda in a dilemma. Thanks for your time watching my post! I created a CBL in Captivate 3, the first 10 slides is a lecture and it is followed by a 10 slides quiz set as SCORM standard. I want the learne

  • Q: Another jsp drop-down menu problem+propeblem with savng button

    Well i have many problems: Starters i use eclipse with tomcat and postgres. I have to create a jsp page that shows some data directly from database. This is what i have so far: <%@ page language="java" contentType="text/html; charset=ISO-8859-1"    

  • Invoking scheduled/bursted reports via HTTP... documentation?

    Hi all - I am looking for documentation regarding the HTTP "API" for BI Publisher Scheduler. There is an HTTP interface for which I can find no documentation. For instance by POSTing a URL such as http://<site>:<port>/xmlpserver/servlet/scheduler?ujo

  • 8.2 update - unable to upload photos from Camera app

    I downloaded the 8.2 update, and now I can't seem to upload photos from the Camera app to Facebook when I check-in. It only brings up my videos from the Camera app, not the photos. Does anyone know how to fix this?

  • Long running SQL needs tuning

    We've an SQL procedure that hangs after running for hours. We've identified the SQL that's causing the bottleneck. Pl. find screnshot of the explain plan below. Pls. suggest me to improve the performance of this query. ===============================