Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
If it is just this version of iOS, I do hope that it is fixed in 8.1.

The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
Compatibility
Questions about compatibility?
Call
0800 048 0408 or Chat now
iPad models
iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
To sort the iPad suggest you restore the device especially if you did the update ovrer the air

Similar Messages

SD CARD READER NO LONGER WORKS after IOS upgrade. Help!

Does anyone have a suggestion as to how I can get my sd card reader working again? My generation 1 iPad worked fine with it until I updated to IOS5. Today was the first time trying to upload pics since the upgrade. Nothing. Not even an error message. I rebooted and still nothing. SoTHAT was $30 well spent. So now, in order to get the pics onto my iPad, I am sending the pics to myself from my HP laptop, opening the emails on the iPad, and saving from there. The card reader used to work great for pics and videos. Gotta love it when upgrades make so I can no longer do before the "improvements." I would just return the camera kit/card reader, but I purchased it a year ago, so that bird has flown. Suggestions?
Thanks in advance and Happy Holidays!
Scott in Barrington, Rhode Island

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

My CF card reader no longer works with OSX 10.9

I am a video editor, I shoot my content on a Canon XF-305 which creates MXF files on CF cards. Until I updated to OSX 10.9 everything was fine and I used to insert the CF cards into my Kingston FCR-HS3 USB card reader and then import/convert the footage accordingly. However since the OSX update I can no longer access my video footage on my Mac. The card reader constantly throws up a generic error message through finder that says 'disk not ejected properly' even though it is still plugged in. I've only managed to import a few seconds using pavtube MXF converter before it all goes wrong. I have used FCP X, Canon disk utility, and pavtube MXF converter - all are up to date with drivers and software and none of them work anymore!
Just to let you know I've contacted Apple and all they said is to check all drivers and software are up to date - which I have done, although Canon has not released any OSX 10.9 plug ins or drivers yet - which might be a problem.
Kingston does have a firmware update, but only for PC.
My thought's were to go back to OSX 10.8 but apple told me I had to use Time Machine for this and the last time I backed up was ages ago and I will lose too much important data.
Someone please help???

Had the same problem with my Kingston FCR-HS3 Cardreader (FW 0123, bought Aug. 2012) when using it on my Macbook Pro Retina 2012 with MacOS Mavericks 10.9.1 on the USB 3.0 port. Trying it on my MacPro Early 2008 with MacOS Mavericks 10.9.1 on USB 2.0 port everything was okay.
When trying to update the firmware of my cardreader to version 0131 (on a Windows 8 notebook) which is only available for Windows, I had an error several times and could not update. After changing to another USB-Port on this notebook everything went okay.
Now my cardreader is working fine and I even notice a rise in transfer speed from 100 (before) to 120 MB/s when using fast CF-cards (600x or 1000x).

SD Card reader no longer works / Yeti Microphone no longer works

I guess I made the mistake of updateing my iPad software during the last sync. Now I get a low power warning when I try to use the Yeti microphone. The SD card reader no longer works as well. was told that I could use a powered USB hub. This kind of kills the whole portability thing.
Can we get Apple to fix this...PLEASE?

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc. HP does not have any any down loads for this. Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

T510 Windows XP 64bit - Multi Card reader no longer working

Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
i do not have any uninstalled drivers, or highlighted items in the device manager.
Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

Hello mate,
Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
W510 only).
Install windows vista or 7 if you want a 64-bit OS.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Active Sync certificates no longer work with iOs 4.3

Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

My results differ from yours.
With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

TS2755 Messages no longer works with iOS 6.

Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att take techline 15 minutes and imessage and text messages working ok

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

Ipod out no longer works with iOS 6.1

As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
Now, all I get is a constant "Reading" indicator and can't get past this point.
Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
Thanks

Try this.
Go to Settings>General>Date and Time>Set Automatically>Off.
Set the date one year ahead. Try to get email.
If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

SD card reader no longer works on iPad 3.

After I downloaded the 8.1.3 operating system onto my iPad 3, the iPad no longer recognized my SD card reader. The card reader is an Apple product, purchased at the same time as the iPad and has worked fine for the years I've had it. I have tried substituting another card reader accessory and another SD card. Same results.

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

CF Card reader no longer works on 10.4. It was working on 10.3

PCMCIA to CF Card reader was working on 10.3. Is not working on 10.4.
I have read all of the articles about it in the archives here, and apparently there is no answer or even suggested answer.
Inserting the Adapter with the card installed gets NO response from my powerbook since the upgrade to 10.4. All latest patches installed are to no avail, and I can read the CF to PCMCIA card on both my Microsoft Box and my other Apple (Not Tiger).
Since I use this method to look and edit pics catured on the card, this is not a satisfactory situation.
I am a little unhappy with no infromation being available on this as a repair.

If you are using a Lexar 32-bit CardBus Compact Flash Reader, you are SOL. Lexar indicated many months ago that they would not be updating drivers for 10.4 compatibility. It's always a good idea to verify hardware compatibility before upgrading your OS.
Good luck!

I'm looking for a compact flash card reader that will work with the ipad 4 with the lightning port. please help?!

I purchased the ipad 4/retina diplay 64 GB model today and i need a compact flash card reader that works with it.
has anyone had any luck with this??
thank you.

I found this with a simple Google Search:
http://photojojo.com/store/awesomeness/ipad-cf-sd-reader/
http://www.amazon.co.uk/Camera-Card-Reader-Connection-iPad/dp/B005NN8V3M
But Diovonex is correct, use the standard Camera Connection kit and transfer them from the camera directly as described in this other thread.
https://discussions.apple.com/thread/4751292?start=0&tstart=0

USB Card Reader no longer works after Lion update.

My USB card reader/writers no loger work since I "upgraded" to Lion 10.7.4. All was well with Snow Leopard, but with no built-in SD card reader I must rely on USB readers. Anyone know how to fix this issue? Are there updates avaiable or coming soon to resolve this issue?

Hi MissMedia 83 and welcome to the forums!!
This has been a trend that a lot of AppleCare advisors have been seeing as call drivers. Essentially, many of the USB internet modems that are used widely require a 32bit kernel to operate. In Snow Leopard, although the system was in 64bit by defauly, people had the option of booting the computer into a 32bit mode to use the USB modems successfully.
With Lion, however, no such options exists. If your USB modem device is only compatible with a 32bit machine, then your only options are to either downgrade to Snow Leopard or find a different provider that supports 64bit.
Sorry to be the bearer of crappy news. My suggestion is to use something like a pocket wifi or personal hotspot, where you have a wifi network that is being created by a small device that connects to the cell network. Much much easier and your computer thinks it's just a regular wifi network.
This is what I think the issue is anyway. Could be wrong.
Any other suggestions?

Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

Similar Messages

Maybe you are looking for