Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Similar Messages

  • Send to iPhone from Apple Maps not working!

    Hi all,
    I'm sure this question has been discussed many times here, but yet I'm posting it again because I didn't find an answer for the issue I'm facing.
    I installed Mavericks yesterday and was testing the 'Send to iPhone' feature of the Apple Maps. Clicking the Share button did display my iPhone, and the maps did its animation of swooshing the screen to my iPhone. But, I didn't receive anything on my iPhone. No notifications. My iPhone is running iOS 7.0.3 and has iCloud enabled and everything else syncs between my iPhone and Mac (like Reminders, Calendars, Notes etc), but not Maps. I don't know why.. I predominantly use Google Maps on my iphone, but I thought this would be a cool feature with Apple Maps.. Oddly, I don't even see Apple Maps in the notification center.. I don't know why that is.. I have enabled Apple Maps within the location services, but this app couldn't be seen within the notification center (not even in the Do Not Include list of Notification center).
    Can someone help me with this. Also, if you could let me know why I don't see Apple Maps in the notification center, that would be greatly helpful..
    Thanks
    Saandeep

    FWIW: I've only tried it once and I saw nothing on the iPhone to indicate it had received anything, but when I went into the bookmarks area of Maps, the address I had sent was there.  Is this how it's supposed to work -- or should there be a notification appear on-screen?

  • Apple superdrive not working on iMac , will not mount , not recognized

    I bought a new superdrive and it was not detected on my iMac. The internal drive was failed , I found a solution here.
    http://www.hardturm.ch/luz/2011/10/how-to-make-the-macbook-air-superdrive-work-w ith-any-mac/

    The Apple USB SuperDrive only works officially on Macs without a built-in SuperDrive (the MacBook Air, Mid 2011 and newer Mac minis, the Late 2012 iMac and the MacBook Pro with Retina display). As your iMac has got a built-in optical drive, it doesn't work by default, but as you said, that workaround makes the Apple USB SuperDrive work.
    Anyway, if you have a Mac with a built-in SuperDrive and the SuperDrive gets damaged, I recommend you to buy a different external optical drive. The Apple external optical drive doesn't have a good reputation because it often fails and it's much expensive than other external optical drives

  • Apple tv not working on iMac

    apple tv freeze when i am trying to connect on my imac

    Yes i did all whats needed and my apple tv is also showing my computer as "michael s mediathek". But when i choose it is running and running. And in the end e message says that i have to proove the settings.

  • HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

    HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
    I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
    I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
    How can I make this printer work on my iMac?
    I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
    Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
    I am open to questions or suggestions
    Thanks,
    Chet

    After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
    The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
    My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
    Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
    Chet

  • My apple ID not working in Apple Store.

    My apple ID not working in Apple Store, in iTunes work fine and with my iPhone work fine too but in my iMac only works in iTunes, App Store and iCloud say "Incorrect password or username", I reset my keychain with the same result. My OS is 10.7.4
    In my iPhone I can acces to App Store, Itunes and iCloud but in my iMac only work in iTunes and online iCloud (icloud.com), the App Store and iCloud system say "Incorrect password or username" and never can loging.
    My Apple ID its confirmed and I buy in iTunes perfect...
    Please help, I have this problem for a long time...

    This is quite strange, as MAS is really the same store as iTS. It's the same account.
    This issue has to be something else going on with your system, and not at the Store's end.
    How about make a new user account for testing. And see what happens when you try to use your Apple ID through there.

  • Apple remote not working

    My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

    Hi Focus,
    I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
    I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
    While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
    I hope help somebody.

  • Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

    Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • Apple remote not working, is there a way to setup Apple TV without the remote

    Apple remote not working, is there a way to setup Apple TV without the remote

    Welcome to the Apple Community Sylvia.
    There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

  • Why is my apple id not working in itunes store?

    why is my apple id not working in itunes store?

    When is it asking for it ?
    If you are updating from iOS 7+ to 7.0.4 then did you have Find My iPod enabled on it ? If you did then it might be asking for the password for your account when you set that 'on'.

  • Why is my Apple ID not working after I've reset it, Why is my Apple ID not working after I've reset it

    Why is my Apple ID not working after I've reset it? After I change it the password icon pops up and I type the new password in and it says it's wrong? What's happening

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Alternate Access Mapping not working for Zone : Intranet

    One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
    is it possible?
    subsequest to my previous question (
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
    I want to ask one more question
    Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
    or
    If there is ".com" within the url then it can't be configured for InTRAnet?
    Thanks
    S H A J A N

    The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
    What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
    http://intranet.domain.com and
    http://intranet as an AAM, or vice versa.
    You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

  • Value mapping not working properly

    Hi All,
    I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
    Value mapping 1 -
    Context - http://sap.com/xi/XI
    SenderParty- SenderSchema
    ReceiverParty- ReceiverSchema
    Value Mapping table in ID -
    Value mapping at field 2 -
    Context - http://sap.com/xi/XI
    SenderParty1- SenderSchema1
    ReceiverParty2- ReceiverSchema2
    Value Mapping table in ID -
    Source payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
       <Record>
          <Emp_ID>123</Emp_ID>
          <Name>rash</Name>
          <Surname>sumit</Surname>
          <Gender>Male</Gender>
         <Grade>E2</Grade>
      </Record>
    </ns0:MT_VM_Send>
    Target Payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
    <Record>
    <Emp_ID>123</Emp_ID>
    <Full_Name>rash sumit</Full_Name>
    <Designation>E2</Designation>
    <Gender>M</Gender>
    <Travel_Mode>Train</Travel_Mode>
    </Record>
    </ns0:MT_VM_Receiver>
    Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
    Thanks & regards,
    Rashmi Joshi

    Hi Rashmi,
    The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
    you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
    regards,
    Harish

  • Camera, Browser & Maps Not Working

    Hi,
    It been since yesterday my Z10 camera, broser & maps not working.
    Whenever I click the camera icon, it is not even opening.
    Browser icon had changed, it turned to a triangle square & circle.
    Can anyone help me out.
    Thanks,
    Chris

    The update may not have loaded properly, you can reload this way:   http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB34045&sliceId=2&docType=kc&noCo​...
    Or do a Security Wipe (Reset to Factory Settings) this way: 
    http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB33591&sliceId=2&docType=kc&noCo​...
    Please read both carefully !

  • Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

    Since updated softwear on iPad to 7.0 Apple TV not working?

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

Maybe you are looking for

  • How to close a Form in LWUIT

    Hi, How do I close a form in LWUIT and go back to the form that opened it? There is no close or dispose command. There is a setVisible command but I don't seem to know how to use it. It doesn't seem to have any effect when used on a form. I have even

  • Legend in MapViewer

    I'm modifying the provided demo-files wich are using the MapViewer-bean. Now I want to add a legend. I can't find out how to do this. In another demo-file is an example, but is using the tags. Is there a way to create a legend without using the tags

  • I have tried downloading PSE 13 and it is not opening.

    I received my serial numbers, hit the two links and "Photoshop Elements 13" appears on my desktop. Where did it download to?  This is not the program. Thx.

  • Canon 1D MkIV images too dark

    Hi there Having a problem here. The RAW images from my Canon 1D Mark IV come in a stop too dark! When I open them, they lookfine; a second later they switch to a too-dark version. I am using Camera Standard, and no other adjustments. It's not just vi

  • Lightroom 6 crashes when attempting to import from camera.

    Never had a problem importing from same camera using LR 5.7. LR 6 crashes when attempting to import from camera.