Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

Hi,
Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
thanks

Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

Similar Messages

  • HT4993 I lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back.

    lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back?

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • So , It was Late At Night And I Put My Ipad On The Chager , And When I Woke Up It Is Not Turning On , Or It Is Not Charging , I Tried To Reset It By Holding The lock button And The Home Button But It Is Not Working

    So , It was Late At Night And I Put My Ipad On The Chager , And When I Woke Up It Is Not Turning On , Or It Is Not Charging , I Tried To Reset It By Holding The lock button And The Home Button But It Is Not Working

    Hello ipadisbroken,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • Ibook powers on for a sec then shuts back down help

    my ibook all of a sudden stopped powering up. but if i leave it alone for like 3 hrs or so it will start to power on get to the gray sscreen then cut back off. i have searched the board but i can still not find a clue as to what is going on or how to fix it

    hey thanx for your help i figure it out it just need it the power thing reset, but it wasn't working till i tried it when it powering on

  • Deskjet 3070A on line and connected by PC says unable to print, as not connected - help please

    I am on a laptop using Windows 7. I recently moved the printer to a different location. I have tried to print but to no avail. I have re-installed the CD and re-configured the wireless, restarted both printer and PC but no matter what, when I try to print, my PC comes up with the printer is offline error and will not print.
    Can anyone help please?
    This question was solved.
    View Solution.

    Go to Control Panel > Printers and delete all old instances of the printer.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Im trying to log onto the internet, but it is not accepting the password. It did for my computer but its not for the ipod. any suggestions??

    I need some help. My ipod was working just fine with logging onto other peoples internet but for some reason i cant anymore. I know that the password is right because it worked with my computer but my ipod just keeps saying fail to connect every time i put the password in. I need some suggestions.

    - Try a reset. Nothing is lost
    - Power off and then back on the router.
    - Reset network Settings: Settings>General>Reset>Reset Network Settings

  • In "about this mac" menu it shows that i have 4,6GB on movies on my mac. but its not true. help please

    hi everybody.
    when i go to the apple symbol on the top left corner , and than on more info and than on storage, itshows me that various things which are ok, but also it shows me that i have 4,6 GB movies on my mac somewhere. i'm 100% sure there is not a single movie on my mac. how can i find out where this movies are , if i have them. could it be that i hide them by accident? or why does he show me that???
    please see screenshot so you know what i'm talking about.
    please help me.
    thanks

    hi,
    i just done that, but the only movies it showed me are the movies from my iphoto library. small movies i made with my camera. there are not enough movies to ad up to 4.6 GB.
    sorry.
    any other suggestions please

  • My daughters Ipod is disabled and it mentions to connect to Itunes. What then? I am stuck and did download Itunes. It says I need to enter the Ipod password? I cant do that because its locked. Help please. Thanks.

    Ipod is disabled and cannot connect to Itunes as it states on the message board. What to do to reset or access? Thank you.

    Restore the iPod in Recovery Mode

  • My iphone4 will not connect to my network.  My iPad and my wife's iPad and iphone4 all connect to my network.  I have tried the solutions in Apple trouble shooting site. Still no connection.The "wheel" turns for 2 sec. then stops w/o connecting?

    My iphone4 will not connect to my network.  My iPad and my wife's iPad and iphone4 all connect to my network.  I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting.  Anyine have a solution to this issue?

    I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5).  Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.

  • My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    Hello there, Conorjl7.
    The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    Hey nocillado,
    Thanks for using Apple Support Communities.
    It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using the same Apple ID for Store purchases and iCloud (recommended)
    Have a nice day,
    Mario

  • I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I brought iphone 6 for my brother but its not getting start

    i brought iphone 6 for my brother but its not getting start

    Howdy satyafrommumbai,
    Thanks for using the Apple Support Communities.
    It's not clear what the issue is with the iPhone, but if it is unresponsive, then take a look at the troubleshooting in the article below.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Have a great weekend,
    Alex H.

  • How do you change the iCloud Apple ID on an iPhone 3GS?

    How do you change the iCloud Apple ID on an iPhone 3GS?  I changed my Apple ID on iTunes and App Store but can not change the Apple ID in iCloud....How do you do it?

    There is a way, but I am not directly familiar with how; see links:
    •iCloud - Apple Support:
    http://www.apple.com/support/icloud/
    •iCloud: Account Troubleshooting
    http://support.apple.com/kb/TS3988?viewlocale=en_US&locale=en_US
    But I did find this ASC discussion that may have a suitable path...
    •How do I change the iCloud ID to log into a different one?
    https://discussions.apple.com/message/21962709#21962709
    Good luck & happy computing!

  • HT201412 ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.

    ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for