Apple TV 1st Generation: Update failed. Apple tv could not be updated

Hello,
I have a problem with my apple TV 1st Generation.
I did a Factory Restore and now i have
Software Version 2.0.2
Software Build 120
OS Build Version 8N5461
EFI Version 00DA.B04
GF Version 3.1.0/2.9.50
I wanna upgrade the Apple TV to Software Version 3.0.2 which is the last but all i get after downloading and installing the update is the same message
Update failed. Apple tv could not be updated. Make a Factory Restore
I have made over 20 Factory Restores but the same message all the time.
I changed the dns server to 8.8.8.8 and 208.067.222.222 but no luck with any of these solutions.
Can somebody help me please, so i can update my Apple TV.
Thanks in advance.

I have already tried to update Apple TV by cable and I still have the same result.
I still can't update it.
Any other solution?
The most annoying thing is that it downloads the update and when it starts installation of 3.0.2 then the message appears.
Can this be Apple's servers problem or Apple's TV problem?

Similar Messages

  • HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

  • Just registered the iphone and attempted to update...message"could not be updated because the firmware file is not compatible"

    Just registered iphone 4s and attempted to run the first update to 5.0.1...message "could not be updated because the firmware file is not compatible." What needs to be done?

    Check out this article, especially #4: Security Settings:  http://support.apple.com/kb/TS1275

  • I have problem in itunes i updated iphone 4s and could not be updated an unknown error occurred 3194

    i have problem in itunes i updated iphone 4s 5.1.1 and could not be updated an unknown error occurred 3194

    Please see the  More Like This  section on the right.

  • Is iCloud is available for Apple TV 1st generation (the first Apple TV), is iCloud is available for Apple TV 1st generation (the first Apple TV)

    Hello,
    I have the first Apple TV and I wanted to know if the iCloud is available for 1st generation Apple TV. Becuase my Apple TV is updated however I couldn't find Purchased Like under the TV Shows.
    Can You help me please with my Question
    Regards,
    Shamma Al Mehairi

    Apple TV 1 hasn't been updated in awhile and there is no reason to think there will be anymore as it's a discontinued product running a separate OS from the current model.

  • TS3694 First attempt to update failed!  ipad could not be restored, 'unknown error 11'

    This is my 1st attempt to update my 1st gen ipad-  'unknown error msg 11- ipad could not be restored " I dont think this is a computer issue- my PC is 6 months old and has newest version of itunes; ( just installed yesterday). It is lightening fast and I have administrator access, etc.  The update appeared to be running fine, going through all the steps, etc,  then failed. HELP! Need ipad for my job! Thanks for any help.

    This is my 1st attempt to update my 1st gen ipad-  'unknown error msg 11- ipad could not be restored " I dont think this is a computer issue- my PC is 6 months old and has newest version of itunes; ( just installed yesterday). It is lightening fast and I have administrator access, etc.  The update appeared to be running fine, going through all the steps, etc,  then failed. HELP! Need ipad for my job! Thanks for any help.

  • Update failed...could not be installed (patch apply failed) - I use 7.0.1

    Update failed. The Update could not be installed (patch apply failed). It appears to want to upgrade from 7.0.1 to 8. But when I click the link, it does not offer updates, just an entire strip/reinstall! Where is the updates page? Help?

    Thank you. I don't want to reload the entire thing - yes, it can be entirely reloaded, but I don't want to lose settings. How do I upload the PATCH as offered?

  • HT201210 Trying to update iTunes; says "iPod could not be updated because the firmware file is not compatible." What does this mean????

    I was syncing my iPod and got the message that an update was available. I downloaded the update and just as it was almost finished, I got an error message. It couldnt' update my iPod because the "firmware file is not compatible." What's up with this? I've never had any problems before with this iPod or with my iPhone 4S before this.

    Update your iTunes to latest version.
    Try restoring your phone in DFU Mode, if that doesn’t work then try downgrading your iTunes back to iTunes 8 and try again.

  • HT3187 how to update Apple TV (1st generation) softwear 2.2

    hello
    i have restored my apple tv 1st generation, and when the restore finished i signed in then i wanted to update my software but i couldn't it told me you software is up to date but it was software 2.2 can you help me hat to do.

    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?

    My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?

    I had the same thing happen to me.  It's a bug in iPhoto 9.4.2.
    The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library".  This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty.  Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
    It's easy to tell if this is the problem you are seeing.  Open iTunes and go to the photos sync panel for one of your iOS devices.  If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
    I spent an hour with an Apple Genius.  he couldn't find any mention of this problem in their internal support system.  His recomendation was to reinstall the operating the system.  I suspect that this won't solve it.
    The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
    I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue.

  • HT3187 Apple tv 1st generation does it have netflix, hulu?

    Does Apple Tv 1st Generation have all the available items that the latest apple tv?  Netflix, hulu? and if so how can I update it so it shows up on my device?

    No, it does not.

  • I have Apple TV, 1st generation.  Just got a Netflix account on iphone but cannot get it on my tv.  Can anyone help me?

    I have Apple TV, 1st generation.  Just got a Netflix account on iPhone.  There is no Netflix logo on my TV.  When I go to the Internet option, only YouTube and Radio are on the drop down menu.  WiFi is properly configured.  Updates downloaded.  How do I get Netflix on this tv?  This 1st gen. Thanks in advance for any help.

    Sorry it was bad news - the ATV 1's were fine machines in their day and still work well.
    Newer features like Airplay, Netflix support, playbcak of purchases from teh 'cloud' etc are only on AppleTV 2 or 3.
    AC

  • Upgrade apple tv 1st generation

    How can I upgrade my apple TV 1st generation so that I can use the IOS 5 option of mirroring my ipad to my apple TV

    ATV 1 cannot be updated, 3.0.2 is the latest it will go. That model has been discontinued and is no longer supported for updates. FYI: It runs a completely different OS to the current model.

  • HT3199 I have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged.  Since then I cannot access the apple tv menu.  When I run diagnostics it says it is operating properly but will not factory restore.  What can I try?

    have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged.  Since then I cannot access the apple tv menu.  When I run diagnostics it says it is operating properly but will not factory restore.  What can I try?

    Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
    Remove the power cord and wait 20 seconds.
    Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
    Try and navigate to the the advanced menu and do a factory restore
    If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
    Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3)

  • HOW TO CONNECT MY APPLE TV 1ST GENERATION TO ITUNES

    i just got an Apple Tv 1st Generation without cables. i want to connect it to my Mac and sync it with Itunes. Which cable should i get to be able to do that

    If you want to transfer something off AppleTV to iTunes you can only do that for iTunes store purchases made on AppleTV, and only if they've never synced back to itunes before - when AppleTV appears in iTunes if you right click on the icon there may be a transfer purchases option.
    Annoyingly there has never been a way to use AppleTV 1 as storage like an external drive to salvage video/music/photos by manually copying them to the computer - doing so would entail hacking or dismantling AppleTV to access the drive directly and even then might be less than straightforward.
    The USB port on AppleTV1 is not for connecting/transfer of data but for 'diagnostic purposes'.
    AC

Maybe you are looking for

  • Time machine backup not usable

    Hello, My hard drive died on me a few months back so I bought a new one and have been trying to use my time machine backup (on an external drive) and my computer won't recognize it and won't read it. I upgraded from Snow Leopard to Lion when it came

  • After takimg the picture of my document and scanning into the adobe PDF it does not read clearly words are meshed together

    after taking a picture of my document and scanning into the adobe PDF it does not read clearly.  words are meshed together

  • Infotype 0017 and 0027

    Dear All, is there any possibility to charge the travel expenses of the employee to a cost center that doesnu2019t belong to the company code where the employee is engaged? This is the case of an employee that is engaged in one country (e.g. Italy) a

  • Enhance LAND1 into 0VENDOR_TEXT

    hi, experts, i am new to BW. and now i want to add the field LAND1 into 0VENDOR_TEXT. RSA6  append struture is finished now. and i need to write code in CMOD. below is my code, no sytax error. HOWEVER, when i go to RSA3 to check '0VENDOR_TEXT', field

  • User action in workflow email

    Dear All, I have a requirement, where user wants to do some action in the workflow email that goes into user's inbox. User wants to have the option of yes/no and  forcing an action on the basis of that. How can email from workflow have this type of f