Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!
Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!
start here: Troubleshooting Home Sharing with Apple TV (2nd generation).
Similar Messages
-
My iPod shuffle does not accept music, while his(her,its) fact one the years when his(her,its) good walking(step), when do I have to make
I couldn't understand your question? What is going on and what are you trying to do? Perhaps this article can help.
Syncing music to iPod shuffle
B-rock -
AirPort does not have an IP address and cannot connect to the Internet.
Wi Fi problems
I have recently changed from a old netgear router to using a vigor 120 modem with airport extreme
Internet connection is established but my airport express reports "AirPort does not have an IP address and cannot connect to the Internet." although status is ON and the correct wifi address appears.
My iPhone also identifies the correct network but cannot connect
Any suggestions?I don't have any phones, so not aware of the options, but on a Mac to fix this problem it'd likely be...
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
https://discussions.apple.com/message/17028445#17028445
Or...
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot -
My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?
Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one. -
My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correctly,even i reset it again but still it does not accepted in iPad .i am bored with this class application.please help.After every 1 second icloud logoin asked.
Find Apple ID
https://iforgot.apple.com/applied
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
HT4352 Why does Apple TV 3rd Gen keep dropping the Home Share connection after 3 to 30 minutes
I've successfully set up the Apple TV3 and it works a dream - for a short while. Then for some reason it disconnects and I have to go back ot the iMAC holding the iTunes Libarary, turn off Home Share then turn it on again and SOMETIMES the problem is corrected for a short while (anything from 3 -30 minutes) then I have to start all over again. Its really frustrating!!. The Apple TV and iTunes are running the most up to date software, there firewall on the iMac is disabled and the router is running its latest firmware. My local Apple authorized supplier can't help - all they suggested was changing the apple password, re-entering it on all devices and trying again - this hasn't work. I'll try any solution though the final one might be to take it back for a refund because it doesn't do what it was sold to do!
I've successfully set up the Apple TV3 and it works a dream - for a short while. Then for some reason it disconnects and I have to go back ot the iMAC holding the iTunes Libarary, turn off Home Share then turn it on again and SOMETIMES the problem is corrected for a short while (anything from 3 -30 minutes) then I have to start all over again. Its really frustrating!!. The Apple TV and iTunes are running the most up to date software, there firewall on the iMac is disabled and the router is running its latest firmware. My local Apple authorized supplier can't help - all they suggested was changing the apple password, re-entering it on all devices and trying again - this hasn't work. I'll try any solution though the final one might be to take it back for a refund because it doesn't do what it was sold to do!
-
Hi, I'm having trouble with my Ipad 2. I was recently playing a game and my ipad just shut off on me. Then when I turned it back on it was stuck on the Apple Logo and it won't go to the home screen at all. I plugged it in my itunes but I don't know what to do from there. I left it charged hoping the apple logo would dissappear but it didn't and now for some reason the battery is always dead. I really need help. Does anybody have any suggestions? Please.
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
I can not log in to iTunes through my Apple TV Box .Is there something other than iTunes Account I need to set up?
Enter the correct login credentials.
The ATV is connected to a working Wi-Fi or wired network, correct? -
Why is my mom getting the error message for province when trying to create iTunes account when providing her credit card information?
Hi Nahal,
I'm just wondering, is it possible that your Mom (originally) got her credit card in a different province?
I don't know much, but of this I am certain: Apple would absolutely, positively, love to help you create an iTunes account!
Otherwise, you can start here > http://support.apple.com/kb/HE57
Best Regards,
mm~ -
Thunderbird starting asking for my password. I know the password, just have not been asked for years.
After typing in password keep getting message
'Sending of password did not succeed. Mail server mail.intergate.com responded: dmanns logon failed '
however, I went to Webmail.intergate.com; was redirected to http://email.1dial.com/webmail/Login.aspx.
Can get email from webmail just fine (same password), just not via Thunderbird.
Have already run two anti-virus scans. Have deleted the saved passwords and re-entered them as the program asked for them and renamed key.db & signons.sqlite (Read this in a forum on the web) and they rebuilt themselves. Still can not get email via Thunderbird.Did you contact your email provider? They may have server issues.
-
My dad and i share the same apple ID and now we have the same contacts. Help please
When my dad got a new phone he got all of my contacts because we have the same apple ID so how do i get my contacts off of his phone and also if he deletes one of my contacts off of his phone it gets deleted off of my phone. Can someone help me? Thank you
To fix this, one of you needs to migrate to a new, separate, iCloud account. To do this, start by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll. If you are syncing notes with iCloud, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com from your computer and delete the other person's data from your account. -
See question above in title.
There is no "adding" a device. Simply plug the iDevice into the computer. iTunes should automatically detect the device when it is connected.
iTunes can sync/manage as many iDevices as you want... there is no 1 device limit. -
The hyperlinks are recognized by other browsers, except Firefox. A simple fix would be for any webmaster to make sure the full hyperlink is written, but that would be inclusion just for Firefox users. Simply put, Firefox should still be able to work like a DOS batch file linking files on the same directory viewed in this manner, but fails to.
That is an MS Office document and everything on that page is a image as you can see in Tools > Page Info > Media and Firefox/Tools > Web Developer > Page Source
If you used MS software then make sure that you disable VML if you save that page because only IE can display pages with VML
You can look at KompoZer for an HTML editor that generates W3C compliant code.
* http://kompozer.net/ -
The problem started when I downloaded the Firefox Beta version 4. I have just upgraded to version 5 and I am still having the problem. I have a center button on mouse pad that allows me to move up and down pages without clicking on the sidebar,
Try this: <br />
Type '''about:config''' in the URL bar and hit Enter. <br />
''If you see the warning, you can confirm that you want to access that page.''
'''''Filter''''' = '''trackpoint'''<br />
'''''Pref''''' = '''ui.trackpoint_hack.enabled''' <br />change that from -1 to 1. <br />Restart Firefox.
Maybe you are looking for
-
Problem with long filenames in packaging processes
Hi, I have a quick question regarding packaging processes of Thinapps. I'm sure others have the same issues too, but it is not much info on it on the interweb. certain application have alot of subfolders in program files etc. when the developers made
-
Integrate NAC Appliance with Active Directory
We try to implement on our customer, NAC appliance integrating with Active Directory Single sign on. The NAC configured with L2 OOB. User first connect to switch and got the authentice Vlan, then the user will be authenticate using their domain accou
-
Cue point code in video to open URL?
I have a cue point in a video, named "CUE_POINT" and I'm trying to get a new URL to open when the cue point is reached. This is the code I've tried. Any suggestions?? import fl.video.MetadataEvent; mymovie.addEventListener(MetadataEvent.CUE_POINT, f
-
Hi Guyz, if value is : 9.2467 should change to : 9.25 i dont wanna use function module Round. Plz advise.. Thanks
-
Very Slow Broadband Speed & Dropping Out
I've just moved into a property where i transferred my BT broadband but its painfully slow and cant seem to keep a connection for 24 hours as it drops out every few hours. The previous owners had BT broadband so its not like this is a new line and th