Apple Tv (3rd. Gen) connect to network but didn't set time and date so...

Hi.
Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
We were on vacation so, I disconnect some devices in my house, including the Apple tv.
I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
So, what happens?
It is general, or is this a single case?
If somebody know about a similar case, and have the solution, I'll appreciate the advise.
Thanks.
Giovanni Pizuorno C.

Hi.
Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
We were on vacation so, I disconnect some devices in my house, including the Apple tv.
I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
So, what happens?
It is general, or is this a single case?
If somebody know about a similar case, and have the solution, I'll appreciate the advise.
Thanks.
Giovanni Pizuorno C.

Similar Messages

  • HT200154 my apple tv 3rd gen is blinking a white light all the time and won't show any video on my tv what do I do

    I recently updated my apple tv software anvd now it just constantly blinks a white light in the front and will show no video to my tv what do I do

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Constantly being asked to set time and date (Apple TV 2nd Gen)

    I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
    Thanks!!

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • Apple stays on setting time and date after restore

    apple tv stays on loading setting time and date

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.

  • TS3274 ipad is locked but it keeps repeating time and date?

    Hi,
    My ipad air is locked but the voice says the time and date and camera infor. when touched?

    Thanks King_P, but I tried all that last night but no avail.
    Each time I press the 'Restore ipad' button, it comes up with the message to say my ipad software is up to date and itunes will check for an update the next day.
    Then it comes up with the message, itunes could not connect to the ipad 'ipad' because it is locked with a passcode. You must enter your passcode on the ipad before it can be used with itunes. (This is like a catch 22 situation whereby I cannot perform this action until I restore, but it will not allow me to restore....arrrrrrgh)
    Also, After pressing the Restore button, it comes up with the message 'The ipad software update server could not be contacted. Make sure your network connection is active.' But there is nothing wrong with my connection.
    Also it comes up with another error message, 'itunes could not connect to this iphone (even though it is an ipad). An unknown error occured (OxE8000084).
    Other messages are 'We could not complete your itunes stores request, An unknown errror occured (Ox80092013)....................arrrrgh
    Off to work and will try anything later

  • Setting time and date on Apple tv

    After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
    manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
    no luck

    Setting date and time

  • HT202157 How can I set time and date in the Apple TV???  This step doesn't let me go on with installing itunes!

    The area is set for San Juan, PR, but it doesn't recognize the date and time.

    This indicates a network issue.  Ensure DNS settings are set to Automatic and the regional settings are correct.

  • HT204291 imac 2012 not detecting apple tv 3rd gen on same network

    One minute the airplay icon was in top right hand corner of imac and the next minute  it wasn't.  Done all checks recommended and still no icon? Everything turned on as it should be.. can view i tunes library and photostream on apple tv just not i mac screen? Need to get this sorted then will sort out i pad and i phone......
    Background - apple tv replaced with new one under 1 year warranty and set up as per instructions, at first got air play then as above it disappeared? Help please otherwise its a genius bar appt and lugging all equipment to nearest apple store.. Thanks.

    if it's a wifi network with both 5Ghz and 2.4Ghz and one device only support one of those and the other devcice loose connection
    and the router don't bridge the 2 frequencies that would happen

  • New Apple TV cannot set time and date. Have unplugged both router and Apple TV, have gone to settings could not restore  , but could reset again stuck on date and time . Suggestions

    Date time Apple TV

    Welcome to the Apple Community.
    If this is a new Apple TV, in addition to trying the steps already taken, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can't Login to YouTube on Apple TV (3rd Gen) (YT and Gmail merged)

    So, I am unable to log in to my YouTube account on my Apple TV (3rd Gen).  I have read a lot of suggestions and nothing has helped.  In like 2006 I got my YouTube User Name, then in like 2009 I got my Gmail.  Google bought YouTube, they merged so I have a YouTube UN and Gmail Account.  I've tried logging in with each.  I've tried using the the 2-step verification, and application specific password.  But to no avail, not working.  Im getting either this Username can't be used on this device for the gmail account log in info.  And unable to login with this Username/password for YouTube UN. 
    Anyone have any suggestions!  This is really frustrating! 
    Thanks Brad

    I had problems back way back in the day with my gmail login so I made a new one (youtube user) for test and that worked fine
    not even sure it's possible anymore to make a pure youtube user you can troubleshoot by checking if it is

  • When I sign in to download an Apple update it says unable to connect to store. check my time and date? What does time and date mean other than what my clock shows?

    When I get a notice to update an app from Apple I am told that the connection cannot be made. Update your time and date. What does this mean other than my ipod clock?

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I cant' download my app. Time and date are asked to check but ok

    I get the message that it can not make a safe connection and asks me to check time and date but they ok

    Is the time and date correct on the iPod? Check time zone too.
    If yu have iOS 5, go to Settings>General>Time&Date and set it to Automatic.

  • My iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, so it means theres something wrong in my iphone.

    my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me

    Hi jaredfox06,
    If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay.  To troubleshoot this issue please follow the steps outlined below.
    Try these steps first
    Make sure that you have the latest software on your iOS device and Apple TV.
    Make sure that both devices have Wi-Fi turned on.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network.
    If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
    On your iOS device, go to Settings > Bluetooth.
    On your Apple TV, go to Settings > General > Bluetooth.
         If you don't see AirPlay in Control Center
    When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
    If you don't, try these steps:
    Restart your iOS device and Apple TV.
    Connect both devices to the same Wi-Fi network.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
    On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

Maybe you are looking for

  • Exchange Rate Type M in MIRO

    Hi We have some issue  in exchange rate . When i am doing MIRO this time i have geeting error enter rate  / USD rate type M for 04.12.2009 in system setting.we have process different types Invoices with different currency in Miro to get this error me

  • Photoshop Elements 10 Installed on a Mac - Error 213:5

    I've installed Photoshop Elements 10 on my Mac and I'm getting error code 213:5.  It won't open and/or run after that.  Any suggestions?

  • Changing data in table level

    Hi friends, I want to change the address of ship to party in delivery document and billing document, table level. So anyone can tell me what is the table and fields name to change the address in delivery document and billing document. In LIKP and VBR

  • My ipod is not recognised in windows or in itunes

    I'm using winows XP. How do I fix the problem?

  • Define a dedicated connection in mapbuilder  to conn. on a database in MTS

    Hello, I'm trying to find a way to configure mapbuilder to use a dedicated connection to connect on a database configure in MTS. Normally, with OCI8, we have to specified a connection like bellow to connect in dedicated. (DESCRIPTION=(ADDRESS=(PROTOC