Apple tv error code -3905

I'm trying to set up apple tv for first time and cannot get it to maintain network connection for more than a couple of seconds. Get error code -3905. Any clues??

Hi,
First post on this forum. I've been pulling my hair out, searching google like a madman trying to find out how to get past the dreaded (-3905) connection error code. Finally i ran accross this post from a lady who turned off her mac address filtering on her router. She said it worked.
So i have a netgear router, i searched around and turned off the mac address filtering box and my apple tv connected to my network instantly. I went to advanced setup/ wireless settings/ wireless card access list and it shows all my home devices connected to the network. I then UNCHECKED the "turn access control" box. And tried my apple tv and boom!
I hope this helps you or anyone! I was ready to return this thing.

Similar Messages

Error code -3905 (Wi Fi Connection)

JUST PURCHASED AN APPLE TV AND TRIED TO SET UP WI FI BUT DESPITE RE-BOOTING MY ROUTER KEEP GETTING THIS ERROR CODE AND CAN NOT CONNECT. DOES ANYONE HAVE ANY IDEAS PLEASE?

You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the conflicting device.
Disable the conflicting device
On the device Properties dialog box, click the General tab.
Click Troubleshoot to start the Troubleshooting Wizard. The wizard asks you some simple questions and provides a solution to your problem based on the answers that you provide.
Follow the resolution steps provided by the wizard to resolve the problem.
You may need to uninstall and reinstall/update the wifi network driver.
S.Sengupta, Windows Entertainment and Connected Home MVP

Apple TV2 error code 144 when streaming Netflix movies

Hi,
I'm new to the community and haven't quite figured out, how to search for the right discussions, so if anyone knows where to find the discussion, solving my problem, please let me know!
Here's my problem:
I have an AppleTV2, which I bought in the Netherlands. I recently moved to Canada and used it here without problems. I got a Netflix account and watched movies until 2 days ago, when the error code 144 occured, when pressing play on any movie.
In detail, the error massage says:
"A problem occurred while playing this item. Try again later, or select a different item. Go to netflix.com/support for more information. (144)"
So I first waited a day, but it didn't work. Then I went to netflix.com/support to search for the error code, but it's not registed. I also called the Netflix hotline, but they said they don't know that code and I should call Apple. Unfortunately, Apple wants to have 29 dollar to help me. Well, NO! So now I'm here and hope sombody knows what to do.
Thanks a lot for your help!
Best regards
tddk

Have you tried rebooting the AppleTV? Press and hold the Menu and Down buttons until the status light on the AppleTV blinks rapidly. Once the main menu reappears it'll take a little longer for the AppleTV to respond to the remote (still rebooting).
This isn't guaranteed to solve the problem but it often does.

Apple Configurator error code 2003 MCCAndMNCs is invalid

Hi,
I have updated my MBP to OS X 10.10 (Yosemite) and installed the latest Apple Configurator (AC) 1.7.1.
I have an existing Profile that includes one (1) payload: Wi-Fi. This profile is used for Passpoint (HS2.0).
In the previous version of AC (1.6 I think), the profile I created worked (iPhone 5S with iOS 7 installed, AC on OS X Mavericks).
Here are the most important fields from the Payload:
Security Type is: WPA2 Enterprise
EAP type field is: EAP-AKA
MCC/MNCs field is: MCC=505, MNC=1 (I can't input 01 into this field, and the MNC is meant to be 2 digits, but the AC just replaces it with 1)
When I try to re-install this Wi-Fi Profile on an iOS8, the AC complains with the following error:
Has anyone seen this error before?
Where can I get a list of error codes that the Apple Configurator (1.7) uses?
Are there any workarounds available?
Thanks,
Al

This is the console output:
"19/11/2014 10:48:04.069 pm Apple Configurator[6524]: ERROR - 1297519ms <ACUProfileInstallOperation: 0x600000189240 { UDID = 2991a2d4d7844f7c8f2b2cd3e3c69ad1a5c7dd22 }> finished in 0.14 seconds with an error: Error Domain=com.apple.configurator.operation.error Code=14 "Unable to install profile ‟Telstra ENIW HS”" UserInfo=0x608001274ac0 {NSLocalizedDescription=Unable to install profile ‟Telstra ENIW HS”, NSUnderlyingError=0x600001a54640 "The profile “Telstra ENIW HS” is invalid."} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-550/Engine/Op erations/ACUOperation.m:151)"
//Al

Apple TV error code ATV-ui511:atv/nextGPS2/mdp

Have tried all procedures to stream "Emergency" on Netflix but getting error code
ATV-ui511:atv/nextGPS2/mdp
All other shows in our list play properly and emergency plays on our iPhones and iPad Air using AirPlay. Any ideas on how to solve this?

On the Netflix website I found this message:
We are currently experiencing issues streaming on all devices.
We are working to resolve the problem. We apologize for any inconvenience.
I like to know they acknowledge it.

Apple TV error code S7363-1266-48444350 from Netflix

When I try to play a Netflix film through AppleTV transmiting from my MacPro I got an error code S7363-1266-48444350.
My TV set is a Samsung UN46EH5000

That is an error related to Netflix and mirroring. You should just use the native app on ATV. If you are attempting to bypass DRM and access another region it will not be possible to discuss much further.

Apple TV SetUp displaying Error Code 3905

Hi Guys,
I am getting the following Error 3905 when trying to complete the Apple TV Setup.
I am using a Wireless Modem, double checked the password, but cannot still connect.
I cannot work out why?

Error -3905
more
appletv Error 3905

Anyone heard or seen an apple hardware error code 4MOT/4/40000003:HDD-1255 ?

i just did an apple hardware test and this is what i got. my imac running slow. it hangs and stutters often.

It may mean the hard drive is failing or has failed but try den.thed's suggestions here > https://discussions.apple.com/thread/2466535?start=0&tstart=0

HT4557 My home sharing won't turn on. When I enter my apple ID it comes up with an error code.

I am trying to start my home sharing on my Mac but it won't recognize my Apple ID and keeps coming up with an error code. Any siggestions?

My Apple ID is my email address perhaps yours is too, try entering your email address

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Can't install quicktime or itunes I recieve error code 2738. I'm running windows Vista 32 with Service Pack 2. I have tried old and new version of both programs. Also, have gone through Apple's online help with no good outcome

Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads. I'm running Window Vista with Service Pack 2. I have check for all window update. I have gone through Apple itune help list. Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

Excellent news!
Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
https://discussions.apple.com/community/ipod

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

Iphone 5 got wet, now apple logo keeps blinking and phone is unresponsive. When I try to restore it I get error code 21 then on another computer I get error code 2006.

My iPhone 5 got wet and I dried it out for 3 days. Now when I charge it the apple logo keeps blinking. Phone is unresponsive, so I tried to restore it but got error code 21. Tried on another computer and got error code 2006. Any suggestions, or is it impossible to get it back?

http://support.apple.com/kb/ts3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
If neither of those fix it, then it's toast. it will have to be replaced.

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

Apple tv error code -3905

Similar Messages

Maybe you are looking for