Apple TV hanged and is now just showing the apple logo
Guys,
My aTV2 just hanged.
I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
aTV2 LED is blinking.
Any idea on how to do this?
Thanks,
Have you unplugged from power and restarted?
If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware.
Similar Messages
-
I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.
Connect your phone to itunes on the computer you use itunes on and open up itunes.
-
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I am selling my iphone 4 and last night I selected to erase iphone. When it did it just went black. After holding down the home and stand by it now just shows the Apple logo on the screen and it will not turn off or do anything it is just frozen. I plugged it into my computer and it will not detect new hardware and itunes doesn't detect it either. It has been showing the logo now for 7 hours. it was last running ios 4. I can't get anything to work. Any help will be greatly appreciated. Thanks in advance.
Put your phone in DFU (Recovery mode) and reload the firmware.
See this link -
hi i am selling my ipad and have erased all content and reset it and now when i switch it on it just shows itunes logo is this correct?
start iTunes,
plug in your USB cable
switch off your iPhone
press holding home button(the round button in front of the Phone)
plug it on to the USB cable
keep holding the button
till iTunes says it found a iPhone in recovery mode
then click restore as a NEW iPhone
then sync!?
http://support.apple.com/kb/HT1414 -
My phone is not coming on except for the usb cord showing in the screen with an Itunes logo after doing an update that I received on line when putting my phone into the station for the night, I saw that there was an update so I said yes. Then this happen. Could someone please help me here, because I do not want to restore or I will lose everything I have with numbers and music in my library. Please advise and respond to me. I use my phone for work as well and can not get the contacts up or anything except for this itunes and usb showing on the screen.
Thank you,
DianaHi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
My MacBook Pro will not start up and it is just showing the grey screen?
My Apple Mac book pro is not starting up ,the screen is grey
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion/Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My ipad is frozen when i try to turn off or on it just shows the itunes logo and the plug in icon
My ipad is frozen with a itunes icon and the plug in icon I can not turn it off or on When I try to it just comes right back to the itunes and plug in icons
It is in Recovery mode and needs to be connected to a computer running itunes.
-
My Ipad shows the Itunes logo with connecter cord and arrow but wont turn on. How do I fix?
In need of some help, my Ipad turned off two days ago. I pushed the home button and the start to reset. Now it shows the Itunes logo with the connecter cord and an arrow. I plugged it into my PC, and there was an update for my Ipad. Waited the three hours for the update and disconnected hoping that everything was fixed. Would not turn on again so held the start/home and it still shows the Itunes logo, and when I plug it into my PC, Itunes will no longer open. I live three hours away from the nearest Apple store and would like to get it fixed at home if possible.
Did you expect iTunes to start automatically or did you start it yourself? Start iTunes and then connect the iPad.
-
error 3194 ? what does it means ? i was just updating my ph and this error accrued in between my ipn 4 is now hanged and not startinf it shows to connect it to itunes
http://support.apple.com/kb/ts4451
-
. I've just bought a new iPhone 6 in miami apple store as a unlocked phone. But now it shows the message that my phone is locked and I can't use my russian sim card. What I need to do to unlock it?
The device is locked to Verizon wireless not a Russian cell provider.
You can use Verizon here in the states. Get a Verizon Sim.
In out of the country use, pop in that Sim and it should work. However Verizon does not unlock for use in the USA.
And you must be a Verizon customer to get it unlocked to use in other countries. Apple claims it will work in other countries.
Good Luck -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
Failed Leopard installation, now just show apple logo over white screen.
I just received OS X Leopard (not the new one, I'll buy it tomorrow) in order to upgrade to the new OS X snow Leopard. During the installation (took over 30 minutes to calculate the installation time that it was supposed to be 2 hr 49 min, I don't know if that's the average installation time). After about an hour of installation appeard a big yellow triangle (warning) over a message box saying something like "Installer couldn't verify 'Essentials' on the DVD, please contact the software manofacturer or try to install later". After restart the iMac it never rebooted, just shows the apple logo with the spinning circle, I left it that way last night while I was searching on the net for some help and iMac kept doing the same over 24hrs (apple logo over white screen). After reading on the forums I reboot with command+s and these are the two messages that are coming once and again in an endless loop:
First Message:
Aug 29 01:46:56 tony-guerreros-computer com.apple.launchd[1](com.apple.KernelEventAgent[2228]: posix_spawnp("/usr/sbin/KernelEventAgent", ...): No such file or directory
Second Message:
Aug 29 01:46:56 tony-guerreros-computer com.apple.launchd[1](com.apple.usbmuxd[2229]: getpwnam("_usbmuxd") failed
The number [2228] goes to [2229] then [2230] to the fist msg again, then [2231] to the second msg,.... in an endless loop.
Before this I have never experienced any trouble with this iMac. I don't know what to do now because it doesn't reboot and I don't have any boot disk besides TechTool Deluxe."Ok. But once I got the replacement disk the iMac will boot with the installation disk even though it now stills "gone" and unable to boot by itself? I mean, the installation disk is a bootable disk by itself?"
Read what you wrote and clarify it. You got the replacement disk? Yes or no. Yes the installer disk is a bootable disk. How else did you try to install Leopard? -
My iPhone suddenly went off and now it shows the apple sign on and off
Hello,
Please help!!!
My iphone 4s just shut down and now its shows the apple image in the middle of the screen on and off. I tried to connect it with ym computer to restore it but it still doesnt turn on. Any tips what to do???
ThanksHello Tormento,
It sounds like your iPhone keeps restarting by itself. I recommend first resetting the phone with this process and seeing if it boots correctly:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue persists, I would next put it into Recovery Mode and restore it with iTunes with the following article:
If you can't update or restore your iOS device
https://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Take care,
Sterling -
TS1363 Iphone just shows the apple and blinks on and off.
Iphone just shows the apple and blinks on and off.
Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen
Maybe you are looking for
-
Lenovo T440 left-klick not working properly
Hi! 3 weeks ago, I bought a new T440 laptop. It is one of those that have the buttons for trackpoint users painted on the touchpad. Because I prefer the trackpoint, I've disabled the touchpad function, so now it is only used for left- and right-clic
-
Lost my previous thread. I have a Macbook Air. Installed Mavericks but it shut down the machine, on opening it upi all of my files etc were gone. Tried to use external back up to restore but to no avial. Now trying to reinstall Mountain Lion. Can
-
why wont my songs upload to my new macbook from my iPhone?
-
Save multiple HDR versions without re-aligning
In Lightroom, I will select several images (an exposure bracket) and select Edit In -> Photoshop HDR Pro. It will take a few minutes, and then I can play with the HDR options and close the wizard which gives me a new photoshop layer that is the HDR i
-
Using BEA Weblogic Portal with Sun Access Manager
Hello all, I am wondering if anyone has had experience with using Weblogic Portal (versions 8.1 or 9.2) with Sun's Access Manager tool (part of the Identity Management suite). In particular, I would like to know what access control tasks were perform