Apple TV Randomly Deletes Entire Content After Restart

So I just plugged in my Apple TV to power and noticed that the first 30 seconds after the main menu is presented, browsing through the menu was very sluggish. I then proceeded to watch streamed content, and after the movie was done, I noticed that the Apple TV was resyncing everything I had synced to the Apple TV.
This isn't the first time this has happened to me. All I know is that the Apple TV remains linked to my iTunes library but, randomly, deletes content once in a blue moon after unplugging it from power and plugging it back in. Don't know if this is a bug in the system or if I am doing something wrong but, all in all, I'd like to know if any of you know what the heck I'm talking about.

That does not matter. If it does then Apple logic is incorrect (and I am saying this as software engineer and designer with quite alot of expereince in numer of large companies). The software is supposed to be transferred into "buffer" fully before it shows up in system structure. If it overrides the existing data then it HAS TO PROVIDE PROMPT with question to a user as this poses a risk of losing data.
So synching in background should NEVER override file risking corruption on power failure. Do you know how data backup systems work (e.g. storage)? This is not a new discipline and Apple should follow the general rules in implementation of such systems regardless if this is media synching for fun or not. People get involved their money in solutions and toying with solving problems on unreliable solution is not entertainment - listening to music and watching movies is entertainment. We pay for reliable solution that is not wiping out what costs time and money. If they provide unreliable solution then they should provide some info, procedure or perhaps a way for backup. They don't more frequently thses days (comapring to what I saw few years ago) so, I lost already two episodes of TV show that I purchased from their store and I am upset as well.
I rely on Apple TV a lot, but I feel I am wasting my time if company start treating me similarily like other big company (figure out which one) that I left for ALL Apple solutions in 2003.
Advises in manner "do not restart" are not appropriate, because sometimes you do not have control over power outage in your area and system should consider those as well (apart of other things that may delete content accidentally).

Similar Messages

  • Dock resets contents after restart

    My dock contents reset after I restart.
    My monitor settings also reset at restart.
    other apps get settings set to defaults after restart.
    any suggestions?

    26-May-2012 01:59I bought an iMac last October, 21", 4GB standard manufactured settings ram etc. After a few weeks every time I quit an application and go back on it, it returns to its old settings. Whenever I remove a bookmark from the toolbar on Safari and restart it, it returns to the old settings, when ever I restart the computer the dock and background changes towards its original settings. This is starting to get really annoying, and I don't know what to do and I have installed all available updates. Is an issue like this covered in a warranty and do you guys have any ideas on what I should do?

  • Apple TV randomly stops playing music after 20 seconds and goes to next tune

    I have the most updated OS on Apple TV, and recently it has started playing a track, after 20-30 seconds it abruptly stops and goes on to the next track.  Some tracks play in entirety, but then several in a row will be abruptly ended.  Any help to correct this is appreciated.

    It was happening 90% of the time at 1:02 minutes into the track.  Even though ATV did not suggest an upgrade, I went to the software update, and it updated something (no information was displayed).
    So, now it is up-to-date, but I still get a random stoppage in the middle of a track (10% of the tracks), and it jumps to the next track.
    I have it on shuffle.  I am on wired ethernet (was on wireless, but switched to hard-wire just in case it was some network issue).
    Sigh.

  • Flash CS5 randomly deleting library content

    Sorry if this isn't the right sub-forum but it seemed to be the closest to my issue as far as I can see.
    Hello,
    I'm working on a  rather large project at work using CS5 Flash. The project involves  loading several .swf files at different times from a main 'hub' type  structure. Think of it as a multi-channel platform and when you click on  the channel you want, it loads the sub-swf with the videos and movie  clip contents/as code in it.
    As one can imagine, this has  cause the overall project to grow quite huge. When we open up the main  fla file that contains the library content of it's children fla's, some  files will randomly go missing.  These files are being shared over a  network with various people via a file repository system so no two  people can be working on the same file at the same time. This doesn't  appear to be the problem, nor is accidental deletion as an individual  can check out the files, work on them locally, save them locally, close  and reopen them  locally and random content will be missing again.
    We  believe that the issue may have to do with the overall size of the  fla's (the fla's range in size from 16mb to 3mb).  They will be playing  as stand alone objects, not on a website so other outside content isn't  an issue. Some of the computers being used are 64 bit system while  others are 32 but all systems have had the issue. We are also using AIR  to help with some of the functionality but this issue started before we  started using AIR.
    Any help would be appreciated. Thank you.

    Did you ever get any resolution with this issue? I am having this too, in multiple projects that aren't connected.
    I even had the same exact MCs in the library in multiple FLAs just in case this happened. When it did, I attempted to drag the MCs from one FLA (where they were NOT deleted) into one where where they WERE deleted....thinking that I would be able to hit "replace" all since the MCs were named the same....when they appeared on the stage they were empty! It wasn't until I deleted the old MCs (with the missing content) that the new ones would show up when dragged over.
    If you have ANY resolution to this please let me know. I am surprised that this isn't a major issue with more people.
    I even have this issue on different Macs using different installed software!
    So this is systemic!

  • Outlook shows SOME deleted messages even after restart

    I'm having a problem with deleting messages on Exchange (IMAP). This problem falls somewhere between javamail, Exchange, and Outlook. I do something like this:
        folder = store.getFolder(folderPath);
        folder.open(Folder.READ_WRITE);
        Message[] msgs = folder.getMessages();
        // do processing
        for ( Message m : msgs )
            m.setFlag( javax.mail.Flags.Flag.DELETED, true );
        folder.close(true); //  Expunge all messages w/DELETED flagThis works MOST of the time. For some reason, Outlook 2003 continues to show SOME of the deleted messages in the folder, even if I click on "Send/Receive", and even if I restart Outlook. No exceptions occur during the processing.
    I also wrote a simple program to get all messages in the folder. This program shows that there are 0 messages in the folder, but they continue to show up in Outlook. Anyone know why Outlook still displays these "phantom" messages!?
    TIA,
    Vick

    Here's a debug session sample where the folder shows 2 messages in Outlook, but none in JavaMail. The two messages in Outlook can be opened and viewed. They remain even after "Send/Receive" and restart of Outlook. These two "phantom" messages were deleted with JavaMail in a previous pass using code shown in previous post.
    DEBUG: no connections in the pool, creating a new one
    * OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (xxxxx.com) ready.
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    A1 LOGIN xxxx yyyy
    A1 OK LOGIN completed.
    A2 SELECT GRN/GRNInbox
    * 0 EXISTS
    * 0 RECENT
    * FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
    * OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
    * OK [UIDVALIDITY 2544] UIDVALIDITY value
    A2 OK [READ-WRITE] SELECT completed.
    A3 LIST "" GRN/GRNInbox
    * LIST (\Marked \HasNoChildren) "/" GRN/GRNInbox
    A3 OK LIST completed.

  • Sos-desktop files deleted/system affected after restart

    hello
    A very strange "system failure" happend today.
    I explain the way things happened:
    1.firefox not responding
    2.firefox restart
    3.looked like firefox upgraded itself(not sure)
    4.lost all bookmarks from the browser
    5.decided to restart the powerbook
    6.all system prefernces settings lost
    7.MOST IMPORTANT-the system affected and all desktop files were deleted (or gone somewhere I still don't know).
    note> I have tried the "bookmark recovery" for firefox. didn't work.
    the thing that puzzles me more is the system's weird failure caused afterwards. why to delete the desktop files?
    Last thought was to run a file recovery soft. but I don't have any installed, any suggestions?
    Please, any insights are appreciated
    thanx in advance
    lambros

    HI,
    *"the thing that puzzles me more is the system's weird failure caused afterwards. why to delete the desktop files?"*
    You need to boot from your install disk and check the hard disk using Disk Utility.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    If you cannot boot from your install disk, try booting in Safe Mode
    Did you repair the disk with DiskWarrior as mentioned here?
    http://discussions.apple.com/message.jspa?messageID=1821781#1821781
    *"Volume check failed.*
    *Error: The underlying task reported failure on exit (-9972)"*
    Did you repair disk then?
    Carolyn

  • I am only seeing an Apple logo on the screen even after restarting.

    So, my son usually is watching netflix on his AppleTV and comes to tell me from time to time that Netflix isn't playing the videos since the beginning.  We unplug or reset and everything is fine.  Also if my TV goes to standby from inactivity after the AppleTV turns off, turing the AppleTV on wake up the TV.  Well lately when the TV wakes up, it doesn't see anything from the AppleTV. Tonight my son comes out to tell me all he sees is the apple logo on the screen.  I think it is updateing, nope.  I do everything from unplugging and reset.  Nothing helps.  I unplugged for a while to cool it off, no help.  I am kind of mad that I hadn't looked up the warranty earlier cause it expired 8 days ago.  The reason I didn't really think there was too much of a problem when it wasn't showing picture a few times, is because I have had kind of problems with it before due to software issures.  So, is this the "apple of death" sign?

    Are you near an Apple store? If so make a Genus appointment and take it in.
    If you have a micro USB to USB cable you could connect it to your computer to see if iTunes sees it.
    Message was edited by: bobbyco57 to correct USB cable type.

  • Automatical deleting of content after time

    Hello,
    I'd like to make a cleanup of wasted data on Adobe Acrobat
    Connect Professional - Server. My issue is to create a script in
    Java, that integrate following points:
    - material which was uploaded in a Meeting only reaches a
    lifetime of 30 days
    - material which was uploaded as meratial in the material
    database only reaches a lifetime of 60 days
    Is it possible to make this true, by using the web-API?
    Or are there other ways to get rid of that issue?

    I work with publisher for a long time now, and I don’t think that there is an automatic process that dose that, you have to manually delete it when it is expired.
    -Lilach

  • Report jobs deleted from q after restart?

    We submit ~100 jobs to the NT 6.0 report server with the queue patch. When the server is rebooted, all the jobs are lost and have to be resubmitted. (The queue tables are empty). Is this by design? Is there a way to prevent this?
    thanks,
    jd

    IS there really nobody except me using the RW_SERVER_JOB_QUEUE functionality?

  • My recent items list appears again after restart. How do I delete it for good?

    When I turn on the computer, the recent items list still displays the documents and applications I worked with a few days ago. I delete it, and after restarting the computer, it displays the same list again (not a new list, but the exact same items over and over again).  Any tips?

    Select the iPod shuffle in the iTunes sidebar (under DEVICES).  If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar).  Select Music or Audiobooks (not sure where those items from the library will be listed).  The items will be listed to the right, for each category.  Find the items, select, and delete.
    It's on page 20 of the manual
    http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
    NOTE:  If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES).  Over to the right, go to the Contents tab, where the items are listed.  Select and delete them from this list.
    I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle.  I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

  • ITunes randomly deleting content - the "!" shows beside them, but they are not where iTunes says they are

    Hi - I find that iTunes has been randomly deleting some content (movies or songs) from my library.  I'll go to play something and it will have an exclamation point beside it.  Sometimes if I "Get Info" and locate the file, it will be there, and then play fine.  But sometimes it is completely gone from the library (still listed with an exclamation point, but not in the file folder it was stored in).  In that case, the location in the "get info" window shows as:
    file://localhost/Users/Username/.Trash/iTunes Media/Movies/Movie Title/Movie Title.m4v
    Even if I view hidden files, I cannot find that folder location to move the content.  The content is also not in the Trash, nor on the extrernal hard drive any more.
    NO idea why this is happening, and can't figure out a pattern.  Is anyone else having this issue, and/or found a solution?
    As background, I'm on a MacBook Pro (2011), running OSX Lion.  I sync an iPhone and an iPad2 to the iTunes library.  iTunes is set to manage files automatically.  The library is stored on an external hard drive accessed through a Time Machine.
    Thanks to anyone that can help!

    file://localhost/Users/Username/.Trash/iTunes Media/Movies/Movie Title/Movie Title.m4v
    But that file location is your System Trash -  you seem to have a problem with the permissions on your Trashes, either in your system Trash or the hidden Trash bin on your external drive.
    See if any hints in this document help to locate the trash on your external drive:
         Solving Trash Problems: http://thexlab.com/faqs/trash.html
    The library is stored on an external hard drive accessed through a Time Machine.
    Do you mean your Library is stored on a network volume (Time Capsule)? Then network problems may be the reason for your dead tracks.
    Regards
    Léonie

  • My iPhone randomly deleted all apps! What's going on? :-/

    My iPhone 5 randomly deleted every app after it ran out of battery - but when I check the storage it only has 212mb available... What's going on?! Where did my apps go? I can't even redownload as the phone flags up there's no available storage space!

    Set it up as new device, as explained in this article:
    How to back up your data and set up as a new device

  • ITunes randomly deletes songs or whole albums

    I've been having this problem for quite some time now, maybe a year..I just thought I was misplacing the songs at first. However now I know for a fact that iTunes is randomly deleting entire albums. How can I stop this? I've thought about locking the folder, but then I probably wouldn't be able to update stuff as well.
    Its extremely annoying because some albums are burns of physical discs and some are ones that I bought online. The physical are OK because I can just grab the original disc, but the ones I bought online I have to repurchase them.
    Will taking off iTunes folder management work? Do I need to reinstall something?

    This is weird in that when you intentionally delete something by selecting it and hitting 'delete' you get the choice to 'Cancel' vs. 'Keep Files' vs. 'Move to Trash' with note in box that only files in the iTunes music folder can be moved to the trash - so it should not be possible for iTunes to completely trash anything.
    The only thing I can think of to check is to be certain in Preferences > Advanced both 'Keep iTunes Music Folder Organized' and 'Copy files to iTunes folder.." are checked (from your first post it looks like they are). If they are not, it is possible that you imported a song in another folder which was not copied into your iTunes folder, that is that you created a link to it but then accidently deleted the original. Of course, if you imported the physical CD using iTunes to rip it this wouldn't make sense. I would recommend making a backup of all music that you buy, but of course that doesn't answer the 'Why' question. -Bob

  • My iPad cannot run after I'm delete the content from reset setting. how to solve this?

    my iPad cannot run after I'm delete the content from reset setting. please help me!

    Try rebooting. Press Sleep/Wake and Home button for 10secs or more till Apple logo appears.

  • My 2009 iMac gets stuck on the grey Apple logo when booting up.  It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

    My late 2009 27" iMac gets stuck on the grey Apple logo when booting up.  It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again.  This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work?  Any ideas?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • Help required in stored procedure?????

    Hi, I need to write a procedure in which a query is executed.I get a coulmn name as tel_no.it returns 75 telephone numbers.I need to return those numbers from procedure which follows below Criteria: Select those numbers which have last 4 digits match

  • What is Preview for iCloud used for?

    What is Preview for iCloud used for? Is this to save any document that can be opened in Preview to iCloud? Thanks.

  • How to do catalog validations through CA

    Hi, How to do field validations in BCC while somebody is editing/publishing catalog from CA? Please share document references if any. Gopi

  • STO PGI happening with out stock checking

    Dear All, My base unit of EA. Order unit CV - Case. Conversion rate is 1 CV = 144 EA. While I stock in MMBE if found 143.998 EA. I raised STO for 1CV and created deliery (VL10B) and done PGI (VL02N) for 1 CV, system allowed me to proceed all these ac

  • Servicegen error: jdk5?

    I'm using WLS 8.1 sp4 and I'm trying to use the servicegen ant task to create a webservice from a session bean. The problem seems to be with the parameter to my EJB method, if I use a string array, all is fine, if I try to use a hashmap, I get the fo