Apple TV video / audio Mirroring stopped working with Yosemite 10.10.3 update

Have just updated two Macbook Airs to Yosemite 10.10.3. Also updated Apple TV to latest version (7.2).
Now video / audio play back is extremely stuttery = only get about 1 sec of play back every 5 secs. We also have a Chromecast (similar to Mirroring) and that plays video & audio from the Mac perfectly. Movies play ok from iTunes, as do Youtube etc directly from Apple TV.
Never had any issues with previous versions of Yosemite.
I can't find any info on this on Apple sites or searching the web. Just articles stating how many bugs 10.10.3 has fixed!!
I can't work out how to contact Apple with this issue, when I use the support page for my location (New Zealand) it times out trying to enter the details.
Cheers

I have found a similar thread that was started last year with the same problems on 10.10.2. The solution suggested there has worked for me - turn off Bluetooth before connecting to Apple Tv via Airplay.
Hopefully Apple will fix this Bug, but I won't hold my breath as it seems some users have had this issue through a couple of releases off Yosemite.

Similar Messages

Audio suddenly stops working with my voice over although I can see the track there is no sound?

So I'm doing a project and recording voice, in several parts, over with no problems. I go to play back and it all works just fine for a few minutes then the audio suddenly cuts out. I can see all the clips with the associated graphs and can't see any issues, the audio just stops???

If it will not connect to your computer, and it will not connect to the Internet, either via WiFi or cellular data, then there is no practical way to extract the information. There are no magic words that will fix the broken hardware.
You could try a 3rd party data recovery service, but doing so will forfeit your right to a discounted out of warranty replacement. Only you can decide it it's worth that.

TS2771 itouch stopped working with Bose sounddock after software update 5.1.1

Have an iTouch that used to work well with Bose SoundDock. Then updated iTouch software to version 5.1.1 and as usual apple ITouchOS now does not recognize the Bose SoundDock at all now. Error message iTouch does not support this accessory. What the heck? How to fix? Buying new dock is not solution. iTouch is gen 4.

You can try the standard fixes:
Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
- If still the problem then it appears that the iOS update broke the compatibility. That happens sometimes. In that case you have to wait for an update from either Apple or Bose.
- Also, use the communities search box in the upper right and search for. bose. I think other users had same problem. It is hard to remember the dock manufacturer.

Nikon .NEF stopped working with Yosemite

I've noticed Nikon format .NEF files from my Nikon D3200 that previously worked in Lion, Mountain Lion and Mavericks comes up as a black thumbnail (or half the image and half black at the center of the image) and the image comes up the same way as well.
My CPU: 2009 iMac Corei7 2.8 ghz with 24 gigs of ram, internal 1 TB drive, external 5 TB array via FW800, 3 different 1.5 TB USB drives. Running Yosemite 10.10. The previous version Mavericks worked fine.
I take shots on a Nikon D3200 using the v1.03 firmware and write to multiple Class 10 SD cards. One is 64 gig, one is 32 gig and I have another 32 gig I've tested as well.
If I take a JPEG, the problem doesn't exist. If I load shots from my iPhone 6 plus the jpegs load fine. I thought it might be the SD card so I've tried 3 with the same results.
If I load a SD card full of .NEFs it seems to cause iPhoto to slow nearly to a halt while attempting to read the images.
It eventually loads them but they're either all black or they are half black/half image.
If I look at the thumbnails they are either black or half the screen is the image and the other half is black.
If I look at the images itself they are either fully black or cause the user interface to almost hang while reading.
I literally went so far as to back up my entire 300 gig iPhoto library to a backup drive and start a completely new iPhoto library.
I deleted iPhoto off my computer altogether, redownloaded from the iTunes store and started completely from scratch.
No joy, same problem.
240 JPEGs off my iPhone? No problem. Thumbnails and photos look great.
3 test .NEFs from a 64 gig SD card from my Nikon D3200: the images are black, thumbnails are black.
Here's the funny thing: I can take the same SD card and load it on my work Windows PC
(Windows 7 64-bit on a Corei7 2.7 ghz with 8 gigs of memory) and the pictures load, store and view fine there.
This is apparently then a MacOS problem.
But not everyone is having the issue: my friend with a Nikon D5300 his .NEFs are coming out fine but he's got a brand new Mac Pro so I'd expect that to work.
It was suggested to me to download the Digital Camera Compatibility Update. However, I can't download a version of the Digital Camera Raw Compatibility Update because the newest one I can download from apple.com is v5.07 and if I try to install that it claims the one I'm running now is NEWER than that one!
I've even tried to leave iPhoto out of the situation by just reading the .NEFs in the finder but it seems to be a system problem because the files have the same issue in preview loaded from the finder.
I even tried a copy of the Gimp for MacOS and had the same "black images" issue.

Have a read of this thread
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
It's helped a number of people.

Apple tv mirroring stops working

I just installed my new Bell modem SageMCom 2684 and my Apple TV mirroring stopped working properly--it freezes in less than a minute when I mirror a MacBook Pro. My TV, Apple TV, & Bell modem are relatively close. I disabled WMM, but no luck. I connected my old router to the modem & connected the Mac & aTV to the same wireless network, but the performace remained bad. I updated aTV's software, but no luck. Is this really a a Wi-Fi network problem, or an issue with Apple devices??? Thanks.

Hello edgar103
When dealing with AirPlay Mirroring , then check out the articles below to troubleshoot the potential issue with Wi-Fi settings. Look to make sure that the recommended settings are in place for your router as well any troubleshooting steps and looking for potential items that could be causing interference.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
Regards,
-Norm G.

USB Video stopped working with 3.1.8 update

I have been using iChat video with my USB camera for a while with the help of iChatUSBCam. The new update of iChat (3.1.8) included support for USB cameras and once installed my USB camera stopped working with iChat. It just reports the camera is in use by another application. I've been browsing for answers for a while and have tried many things:
- Restart in various combinations of unplugging and plugging in the camera
- Reinstalled the Macam driver
- Reinstalled Quicktime
- Uninstalled iChatUSBCam (since iChat is supposed to work without it now - I think...)
- Reinstalled iChatUSBCam (v 2.2.1 - current)
It's a Logitech Quickcam for Notebooks Deluxe. It continues to work fine with Skype and the the Macam camera tool. I'm using Skype for now (on tour for 6 weeks and use it to video call home) but the quality is crap compared to what iChat used to do.
Thanks for any help you can give.
Stranded in the UK with no decent video chat
Matthew
Powerbook 12" 1GHz - 1.25G RAM Mac OS X (10.4.9) Logitech Quickcam for Notebooks Deluxe

Some people have reported that Updating iChatUSBCam
and deleting the Macam drivers and then the
com.apple.ichat.plist is the way to go.
Thanks for your help!! I tried these things before, but tried them again in the order you suggested with no success. I'm pretty sure it is not a UVC compliant camera. It's not on Logitech's list of UVC cameras.
M/N: V-UBG35
P/N: 861228-0000
PID: CE6420A
If I try it without the Macam drivers it doesn't show up as a camera is connected at all.
It's so frustrating because it was working great with iChatUSBCam until the recent update. It still works in Skype with no problems, but I'd rather be using iChat if I can - much better video quality.
Thanks for any suggestions!
Matthew

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Hi Ron.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

HT1655 I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory

I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory reset or fix the problem?

Hello there, RufusChloe.
The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/shuffle3gen/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ?

My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ? All of the other services work correctly.

Apple already have a position on such matters. If you have a problem with one particular service and not others, contact the provider.
Contact Apple TV content providers - Apple Support
However, 3 similar reports, do not a problem make. Perhaps there is a problem, perhaps there isn't, but it really doesn't seem to affect many people if there is, believe me when there is a problem it's quite obvious from the additional traffic it causes in these communities. It's also not exactly clear that you are all seeing exactly the same thing.

I am possessing apple iphone4. In my phone while watching video, audio is not working. Volume level is fuul

I Am holding iphone 4.7.1.2. though my volume is full, while on video audio is not working.

Hi klgksharma,
Welcome to the Apple Support Communities!
I understand that you are not hearing sound from the speaker of your iPhone while watching video. In this situation, I would recommend working through the steps in the attached article to troubleshoot.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Best regards,
Joe

IChat video/audio fails to work

iChat video/audio fails to work 90% of the time. The error message says the other party failed to respond, or some other, similar, bogus "communication error" message.
Invitation to video or audio chat fails 100% of the time with certain buddies of mine, and anywhere from 50% to 90% of the time with others, regardless of whether they invite me or I invite them. Changing ISPs, Macs, locations, or static/dynamic IP settings has made no difference.
This problem surfaced with Tiger in the summer of 2007, and progressively became worse, especially since Leopard, to the point where iChat video/audio fails 100% of the time, unless the other user happens to be in the same [home] network.
All of a sudden the problem went away since the upgrade to 10.5.6, and I was able to again use iChat video to communicate with friends I have not been able to "see" in a year and a half! However, the problem started again today, with the same bogus "communication error" message every time a video connection attempt is made.
Screen Sharing also fails to work, 100% of the time, regardless of how it is invoked, through iChat or not, unless, again, it is attempted between 2 macs in the same home network.
In the meantime, Skype video works fine all the time.

Hi,
Thomson-Alcatel by default do what is called Binding of SIP to port 5060
This means ANY SIP data is forced to that port. iChat 4 no longer uses this port for SIP. It caused problems in iChat 2 and 3 which could be resolved when the firmware was Version 4 or earlier.
How do I know ?
Personal Experience from a Speedtouch 510v4 (running version 4.2.5 firmware)
Hence the web page I linked you to.
Built up from comments on the iChat 3 forum and the iChat 2 forum since 2004
Search Results for iChat 3 (it will only go back to about Nov 14th 2005 when the software Apple Uses to run the forums changed - some active threads did cross over this date so occasional ones are older)
Smaller results from iChat 2
The work by iBoise in this forum and the ADSLGuide's Apple Forum
Known issues for the BT HOME HUB in Britain as it is a Thomson-Alcatel inside.
Because the fix on Page 4a in the orignal link I gave, worked until Version 5 firmware came out.
As I clearly said the results can be intermittent.
With non Speedtouches it tends to be a 10:10:30 split out of 50 Buddies
10 you can get all the time.
10 now and then Buddies and
30 Never successful.
The Original Version 4 Telnet command would make this 100% successful to non Speedtouch devices
In Version 5 it becomes about 15:10:25 which only marginally better.
Later versions of the firmware do not even seem to reach these figures.
Speedtouch to Speedtouch connections are better but still not 100%
I would guess you live some where where Speedtouch's are popular and have many Speedtouch to Speedtouch connections that fair slightly better than average.
Last time I had contact with iBoise on this the Firmware was at version 7 and he was in the process of evaluating it for any changes.
There has been no announcement. In this case I don't think No News is Good News.
I hope this helps.
10:42 PM Wednesday; January 21, 2009

HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3. When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working. When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode. I am using a DVI connection with the adapter for the mini display plug. REALLY FRUSTRATING. Any help would be extremely appreciated.

Hi lancekatigbak,
If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden

Itunes stops working with vista

Has anyone had problems with itunes stopping working with windows vista? I have tried all the upgrades but itunes still stops working when playing songs and videos.

Tizzy79,
Your computer is blue screening. This is frequently caused by problems with driver conflicts or a computer virus. Make sure you've scanned your computer for viruses and spyware.
If that doesn't help, let's capture a minidump of the crash and send it to the Apple engineers to analyze.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties". In the dialog that comes up, select "Advanced System Settings" on the left. In the dialog that comes up, select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
You need to send that file to our buddy Roy, [email protected] Make sure that you include:
(1) the mini dump file.
(2) the link to this thread.
(3) a one line description of your problem, i.e. "iTunes Blue Screens Vista".
(4) the username that you're using here in the discussion boards.
Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

My iPhone 5 stopped working with my 2015 Subaru Outback after the iOS 8.1.3 update

My iPhone 5 stopped working with the USB connector on my 2015 Subaru Outback. The phone will still charge, but the message is something like "this iPhone will not work with this accessory". Is there a fix being made? I saw others post with issues with the latest update. It worked fine with the prior iOS version 8.1.2

Hello bballfan85,
It sounds like your getting an error message that the iPhone isn't going to work with your Subaru all of a sudden over USB. I would use these troubleshooting steps from this article, named:
If you need help with iPhone, iPad, or iPod touch accessories
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
These steps will help you troubleshoot the iPhone side of the equation.
Thank you for using Apple Support Communities.
All the best,
Sterling

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

Apple TV video / audio Mirroring stopped working with Yosemite 10.10.3 update

Similar Messages

Maybe you are looking for