Applet Not Running in IE. Need IE settings for running applet.

Hi
I am facing a problem with Applet while running in IE-6. The problem is very simple; Applet is not running in IE-6, not even a simple applet which displays just a Label.
I am using Java Version 1.4
Settings for IE is as follows
Java (Sun)
CHECKED Use Java 2 v1.4.0 for <applet>
Microsoft VM
CHECKED Java console enabled
NOT CHECKED Java logging enabled
CHECKED JIT compiler for virtual machine enabled
The applet is running in Appletviewer and run in IE in some other machine. The problem is in my browser and Java versions.
If I start the applet in IE it is not showing even Jave Console (which is enabled).
In Java Plugin (Control Panel) I enabled Show Console and set MSIE checked.
What should I do to solve such a stupid problem with my IE. I have updated my JVM and IE twice but yet to wait for solution.
Your help is worshipfully appericated.
with love Vijay

I got some reasonable solution from some other forum.
The Problem is with the VM. The JVM is crashed with MS VM.
That is why the browser diplays class not found error.
This is because the MS VM is not allowing the JVM to look for .class files.
This will happen for java 1.4.x .
If you use HTML converter (converting the applet to object) it will work.
But the Optimal solution is compile your applet file with -target option.
e-g
javac target 1.1 HelloWorld.java
It is the most efficient way to avoid such problems with IE while running the applets.
I Thank you all for your solutions.
with love Vija

Similar Messages

  • Please help us, after we installing the flash player is said that the plug-in version is not installed and i need Flash Player for my windows 7 Professional 64-bit Japanese version and Internet explorer 10

    Please help us, after we installing the flash player is said that the plug-in version is not installed and i need Flash Player for my windows 7 Professional 64-bit Japanese version and Internet explorer 10

    Hello,
    There are two versions of Flash Player for Windows:  ActiveX for Internet Explorer and Plug-in for non-IE browsers. It appear you may have installed the one for non-IE browsers.  Please use the links below to download and install:
    Flash Player ActiveX (Internet Explorer
    Flash Player Plug-in (All other browsers)
    Maria

  • TS1307 The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    "Well Known" TCP and UDP ports used by Apple software products
    http://support.apple.com/kb/TS1629?viewlocale=en_US

  • New Users!  Need best settings for Import

    I have just installed FCE 4. I have footage on MiniDV (1080i) as well as Canon 5D Mk 2 footage at 1080p (30fps). I want to edit these together. What settings are recommended for import.

    There is no good solution for your media. You need to set HDV 1080i60 to capture the HDV media. That media is 1440x1080 interlaced. You need to convert the Canon EOS material as it uses H.264 which is not a production codec, but one designed for delivery. You can use MPEG Streamclip to convert it to QuickTime using the Apple Intermediate Codec.
    Here's your next problem you can convert it to 1440x1080 at 29.97fps, in which case it will match the HDV material and not need to be rendered in FCE. Or you can convert it to it's original format 1920x1080 at 29.97fps, but then you'll have to render in the FCE sequence. In either case the audio should be converted as uncompressed stereo 48K. Never heard of 42K. No idea why of earth Canon decided to to do that.
    In FCE you can set your sequence item properties to have no field dominance. This will prevent interlacing your material that's not interlaced. The interlaced material of course will remain as it is.

  • Firefox will not recognize when I change the settings for .torrent and .rar files to "do this automatically for files like this from now on", EVEN AFTER I change the setting in Tools Options Applications.

    Um, why is this? I think my Question pretty much covers it. Is there a way I can fix the settings so Firefox automatically opens .torrent files and .rar files with the programs I tell it to always use?

    I'm sorry to hear that you didn't receive a reply to this problem. As far as I can tell, there '''is''' no reply or solution to this problem so far, as I have exactly the same problem too.
    One solution that I did try (and which worked, but not for my exact needs) was to tell Firefox to ''always'' '''save''' the torrents to the download folder. Then, in your personal torrent program, change the settings so that torrents from the download folder are automatically searched and added. In this way, torrents are automatically loaded in your torrent program. However, for me, I need to see the contents of the torrent before I download it all, which wasn't possible with this method. If that isn't important to you, this should be a sufficient solution.
    Regards,
    Lewis

  • I need the settings for a mail provider, fsmail, to add the mail to my iPhone 6. Can anyone help ? I have tried contacting the provider, which is EE, but they are impossible to get anything out of.

    I have an old female.net account, which I want to manually add to my iPhone. However I can't find all the necessary settings to be able to do so. Can anyone help ? the provider, EE, has proved impossible to get anything from.

    Well, in that case, you need to log into your account at female.net and get the mail setting from there.
    Mail accounts have nothing to do with your carrier - they just provide your phone connection, so it's not really surprising that EE were not helpful, because this e-mail account has nothing to do with them.
    Go to female-net and get the mail setting from there because the account is with them.

  • Need export settings for grass valley T2 iDDR

    I'm getting ready to send my show over to a cable station. There requiremnts need to match a Grass Valley T2 IDDR playback unit. They support a wide range of files (DVCPROHD, MPEG-2, Quicktime, HQ AVI, Windows media Video HD), but the frame rates listed are 59.94i, 50i, 24P and 23.98P. Most of the 1920x1080 presets are for 29.97. Any suggestions on thye best preset or settings to use? It list HQ AVI as an acceptable format, is that the same as mp4 (H.264?). Here's a link to the file formats supported (page 15): http://www.grassvalley.com/docs/Application_Notes/servers/t2/PRV-4146M_EDIUS_T2_AppNote.pd f

    Thread resurrection...
    Hmmm. A rather unhelpful, and slightly arrogant, response there from Jim Cookman. I don't read anywhere in the OP about using this setup 'in the field'...
    I have an Indigo, and I've been having the same problems as the OP (testing the setup prior to using in the field!).
    I've tried capturing the 1394 outputs to a variety of devices, with mixed success.
    To a Macbook Pro with FCS:
    Basically followed the process outlined by Studio X above.
    FCP7 will not recognise the device at all, even with 'non-contollable device' selected. All permutations of settings tried.
    However, iMovie is quite happy with the video stream, and displays it OK.
    To a W7 laptop with Avid Media Composer & VLC player:
    MC will not recognise the device, and will not accept that there is a DV signal there.
    However, VLC is quite happy with the video stream, and displays it OK.
    To a Sony HVR-M15E deck:
    This displays the video stream, but it is broken up with grey blocks all over the screen.
    The one thing that links all these is that at no point is any audio present.
    Further reseach has uncovered this Indigo FAQ: www.grassvalley.com/rnt/Switcher/Indigo%2015%20-%20IEEE%201394%20Firewire.pdf
    that states something that is not mentioned anywhere in the user manual or data sheet: the Indigo 1394 ports do not carry audio, either as inputs or outputs!
    Which, combined with the fact that they only seem to be recognised by non-professional applications, renders them pretty useless, IMO.

  • I am looking at a personalization where I want to make the quantity field on a PO not editable. I need this only for certain lines.

    I need to disable quantity field on a PO based on a condition.
    My current approach is to keep the line number in local variable and disable the quantity on that line itself using forms personalization.
    I could succeed to an extent where I could store the line number in local variable but I am not able to proceed beyond that. Please help.

    Hi,
    Have tried with following setting ?
    Trigger Event = WHEN-NEW-RECORD-INSTANCE trigger  or WHEN-VALIDATE-RECORD trigger
    Trigger Object = PO_LINES
    Condition  =  < as per business need >

  • HELP ! ... Need DVCAM settings for FCP 5.1

    I've filmed on a Sony HDDZ1P in DVCAM mode, inserted the tape into a Sony DSR-1500AP, opened FCP Pro 5.1 & it's not finding the deck. The G5 is recognising it's connected via Firewire but in the "Log & Capture" it can't find it. If I press PLAY ... it starts the deck.
    HELP .. I'm tearing my hair out and it's going grayer in the process !!!
    Regards,
    Andrew

    Glad you got it fixed. Still, if you had searched for a moment, you would have discovered yours is a very common problem with a very simple answer - as Jerry suggested in his post. All you really needed to do is reinstall QT using the 'delete receipts' method. Something to remember for the next time it happens.
    Oh well, if nothing else, you now have a very clean machine.
    good luck.
    x

  • Needed config settings for automatic storage location

    hi,
    sap gurus,
    configuration settings needed for automatic storage location at sales order level.
    it is coming by using OVL3 at delivery document level.
    but we need it sales order level.
    regards,
    balaji.t

    Hi Balaji,
    In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
    However to map your requirement of having Storage location determination in the Sales order do the following:
    In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
    Hope the same works for you!!
    Regards,
    Ajinkya

  • Hello-Not Sure About the MBP Leopard Settings for the Display

    I want to get a new MBP for my next step. I was also wanting th one-on-one but my bud has not had much expereince (good) with this. I think he and I need the persnal training? Is that the same as one-on-one?
    <edited by host> I was wondering about the new display and how good it looks but is it a look that that is conducive to using other programs. It appears to be soo glossy and if you are not looking head on you miss a lot. Is this new display popular? Can it be changed so other programs can take front and center when you need them t and not the Leopard display all the time.
    any feedback, helpful <edited by host>. I hope tis makes some sense.

    If I were in your position I'd wait until the last possible moment. Vastly faster MBPs are coming (the much discussed Merom chip), possibly by the start of the school season, but absolutely by Oct/Nov. I would not buy now. The current MBP is just the beginning, and in two years it will really be showing it's age.
    17" seems right for you considering your major, but keep in mind the 17" can be a PITA to schelp around.
    If you will be going to a large school they might offer better deals than the online Apple Edu store, so be sure to check before buying.
    The issues you see posted here are not typical. There are a large number of people that do have problems, but there is an even larger universe of owners that have no problems.

  • Need GPO settings for firefox to have similar settings as IE

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1042786 /questions/1042786]''
    The firefox gpo adm files are not pushing the gpo settings to firefox, please help

    hello,
    searching on the internet I found the name of the APN : orangenet.com.do
    I don't know if they require credentials.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Need BIOS Settings for 180 and AMD XP2400+

    Greetings all.
    Here is my configuration;
    MSI Mega 180 Deluxe
    Western Digital 200GB 7200rpm
    Athlon XP2400+ Thoroughbred
    1x DDR400 512MB PC3200 (Infineon w/Heatsink)
    Sony DVD+/-R Dual layer Drive
    Gigabyte FX5200 128MB TV out/DVI
    MS Windows XP Pro SP2
    This is the 1st system I have built and I am a bit confused on what to set in the BIOS to get my processor running at its rated speed. The BIOS reports it at 1.84ghz. I set the FSB to 166. What else do I need to do (and where do I look) to remedy this?
    CPU Spd 3700
    Sys 46c
    CPU 58c
    With WinAmp playing and writing this.
    Artic Silver on the Heatsink.
    I have searched the messages on this forum but find nothing that answers my questions.
    Thanks for your responses.

    Update:
    I emailed MSI tech support with the problem and this is what they said:
    Dear Customer,
    Update the bios to version 3.5, which you can download from this link. And set the cpu fsb to 133 for a thoroughbred cpu, and 166 for a sempron cpu.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=546&kind=4
    Sincerely,
    Technical Support Division
    MSI Computer Corp.
    MSI Platinum Series Motherboards -- In Pursuit of Quality Perfection.
    http://www.msicomputer.com
    1.626.913.0828
    1.626.581.7721 Fax
    Did what they said.
    Set FSB to 133
    BIOS says 1433 mhz. No change from before.
    I reset the FSB to 166 and it now runs at 1866 mhz (rated 2ghz)
    As far as the cooling problem, I haven't touched the Heatsink/Cooling fans yet.
    Temp dropped when I lowered the FSB.
    I bolted a 92mm Fan to the outside of the case (Biohazard grille) and the temp now runs at 48c CPU and 36c Chassis.
    Plan to do the fan reversal this weekend and maybe the lapping.

  • Not a programming type; need quick help for current project

    I am helping a non-profit which is involved in a significant legal battle work with many thousands of e-mail messages for electronic discovery. While reasonably technically competent,I am not a programmer and don't have time to learn scripting, if that is the way to solve my problem.
    I am using Microsoft Outlook 2003 (full version) to manipulate the e-mails necessary for the discovery into manageable folders. I have Acrobat Professional 8, and am turning the e-mails into packages using the Acrobat properties/options that embed in Outlook 2003 when both pieces of software are installed. The resulting packages have about 1500 .pdf files that must be reviewed by the attorney to determine if any of the documents are privileged.
    My plan was that the attorney would review each package using Reader 8 and put an electronic yellow sticky on each document that was privileged so that we could go ahead and do the Bates numbering, but then be able to search on the sticky to pull out the documents into another package that would not be part of the discovery.
    Now, the flaw in my plan - each individual file created through my process must be opened in Acrobat and permission to use the commenting function in Reader set for each individual document.
    Because all the individual documents in the package will be open at the same time, could one of you marvelous linear thinkers out there give me a fix for this? There has to be an easier way than to open each of thousands of folders!!!!
    TIA,
    Mary

    Unfortunately there is no programmatic way to "Reader Enable" (which adds the commenting ability in Reader you speak of) with Acrobat. Adobe creates a separate server-based product to allow you to do this, called LiveCycle Reader Extensiion Server.

  • Need export settings for 1 hr HDV file from HV20

    Hello,
    I have imported a 1 hr tape of HDV, and I am trying to export it to Quicktime in order to have it be playable from my hard drive. The iMovie file is 42 gig, so this is impractical.
    Any suggestions as to which codec (I have tried H.264 but can't get it to go through.) and which settings in order to produce a roughly 5-10 gig 720p file that looks reasonably well?
    Any help would be appreciated
    Thanks,
    Ken

    Compression quality really depends on the type of video that you are trying to compress.  If the video is full of motion and noise, it will be very hard to reduce the file size through compression without massive loss.  Compression is a trade-off.  If you reduce the fame size to 480p, you may increase the quality of the video while reducing the file size versus trying to do the same thing at 720p.

Maybe you are looking for