Application 1 is not visible in LBWE?

Hi experts,
- Application extractors are not listed in LBWE. For example 2LIS_01_S001 is not available to activate. How to make it visible in LBWE and activate the extractor?
- What is the purpose of mantain extractor in LBWE? I mean for the standard LO extractors I don't have to hide the field or select a filed. We use mantain extractor in LBWE only to Hide a particular field right?
- What is the transaction to fill application 1 setup tables? What are required fields that I have to fill on the screen?
Thanks in advance.
Sharat.

When you say you cannot see the folder for the applications, what do you mean?  This is not something that is visible to company administrators. If you look at the company workspace tab in admin mode > uDesigner > Business processes, you should see approximately 45 BPs. If you see those, then the 3 SKUs loaded.  You will also see project templates, but no created projects.  You should see a tab on the top called All Projects.
Please let me know if you are missing anything.
Sean

Similar Messages

  • Planning application is not visible in calculation manager

    Hi,
    I'm novice to EPMA.
    I have successfully created and deployed an EPMA application,but when i'm unable to see the application(s) under planning node.
    As per my knowledge EPMA application by default deployes in calculation manager,if so why the application is not visible.
    any suggestions on this r helpful to me
    thanks

    The issue is resolved now.
    The calculation manager service was set to automatic, set it back to manual and restarted calculation manager service.
    It showed the application in calc manager.
    Regards.
    Ace

  • Application Components not visible in SAP R/3 tree

    Dear All,
    We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
    In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
    How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.

    You can also Replicate a single datasource w/o replicating the  App Comp using a FM.
    BW
    SE37
    RSAOS_METADATA_UPLOAD
    Execute
    Give Source System n Datasource - Execute
    *Give Datasource Name - for I_O... & Source System for Logsys.

  • Default Web Application is not visible in Weblogic Console

    We are using Weblogic 5.1.0 SP7
              We moved our Application from the Implicitly Defined Default Web
              Application which is configurated by the
              weblogic properties to a Web Application. Because we don't want to
              change any URL in our Application, we
              decided to deploy it as Explicitly Defined Default Web Application.
              By this we recordniced that the weblogic.httpd.defaultWebApp property
              worked not that way descibed in the
              Weblogic Documentation. You have to write the path to the WebApp not the
              name!
              So we have the following Entry in the weblogic.properties:
              weblogic.httpd.defaultWebApp=i:/if_home2/web
              This works fine. The Server starts and serves the WebApp the way we
              expected. But wenn we start the Weblogic
              Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
              applications" folder. This one is empty
              now! Previously the "General" Entry for the Implicitly Defined Default
              Web Application was shown here, which
              showed our Servlets and JSP's and their hit count and parameters.
              So there is no chance to monitor the Servlets and JSP's of the default
              Web Application.
              I tried to deploy our WebApp a secound time with
              weblogic.httpd.webApp.OurApp=i:/if_home2/web
              but this create a second independent WebApp. OurApp is shown in the
              Weblogic Console but it does not monitor
              the hits to the default WebApp. So this is not a solution!
              Any idea to make the default Web Application visible in the Weblogic
              Console?
              

    in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
    Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
    I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
    As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
    please tell me what could be another workaround. 
     

  • Default Web Application ist not visible in WebLogic Console

    We are using Weblogic 5.1.0 SP7
              We moved our Application from the Implicitly Defined Default Web
              Application which is configurated by the weblogic properties to a Web
              Application. Because we don't want to change any URL in our Application,
              we decided to deploy it as Explicitly Defined Default Web Application.
              By this we recordniced that the weblogic.httpd.defaultWebApp property
              worked not that way descibed in the Weblogic Documentation. You have to
              write the path to the WebApp not the name!
              So we have the following Entry in the weblogic.properties:
              weblogic.httpd.defaultWebApp=i:/if_home2/web
              This works fine. The Server starts and serves the WebApp the way we
              expected. But wenn we start the Weblogic Console the WebApp ist not
              visible in the "myserver/HTTP/Servlet web applications" folder. This one
              is empty now! Previously the "General" Entry for the Implicitly Defined
              Default Web Application was shown here, which showed our Servlets and
              JSP's and their hit count and parameters.
              So there is no chance to monitor the Servlets and JSP's of the default
              Web Application.
              I tried to deploy our WebApp a secound time with
              weblogic.httpd.webApp.OurApp=i:/if_home2/web
              but this create a second independent WebApp. OurApp is shown in the
              Weblogic Console but it does not monitor the hits to the default WebApp.
              So this is not a solution!
              Any idea to make the default Web Application visible in the Weblogic
              Console?
              

    Hello Nadar,
    Tell me how are you starting server in the cluster, through nodemanager or commnadline.
    Kuldeep

  • CAF-Application Service not visible in GP

    Hi ,
    I've created a composite appliocatioon service which contains an entity service and an application service.
    After deploying, I also tested it successfully.
    Now I want to use this service in callable object in GP.
    But I'm not able to see the application service there.
    My application is visible there, but next two column(Service name and method name) remains blank.
    Wat I've read from tutorials is that only application service can be used in GP.
    It is showing service name and method name for caf.core and caf.tc,but not for my application.
    Can anybody tell me the reason what is the possible cause for that ?
    regards,
    Piyush

    Hi Dipankar,
    I have already tested the service by the procedure you have mentioned.It is working fine from service browser window.
    Is there anything else need to be done to  use that service in CAF GP(some configurations etc)?
    While creating CO, it is showing the service name and methods for caf.core but not for my Application.
    Regards,
    Piyush

  • All custom application folders not visible on nwds

    Hi,
    We are using NWDI and NWDS is used as IDE.
    We have created a custom b2b application on NWDS,every step was successfull.
    But now we are not able to see all the folders that should be there inside the custom application.
    This application is running fine also and when we checked for its content on the j2ee server itself
    all the folders were there.
    Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

    I copied all the folder manually to NWDS and its working fine now.I dont now the reason why those folders were missing.

  • All application folders not visible on nwds

    Hi,
    We are using NWDI and NWDS is used as IDE.
    We have created a custom b2b application on NWDS,every step was successfull.
    But now we are not able to see all the folders that should be there inside the custom application.
    This application is running fine also and when we checked for its content on the j2ee server itself
    all the folders were there.
    Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

    Hi Arshi,
    I think that the public/private not causes to missing the content in NWDS. Probably  some one deployed this content or application directly using the SDM password and they never check in  this component and that's why the application is working fine and the content got deployed but the latest source  is not available in DTR file system. So, When you sync this application form the DTR  the latest you got  is whatever the previous  version you had and which is missing the latest content.
    Thanks
    Krish

  • Webdynpro application group not visible in Portal

    Dear All,
    I have a webdynpro for java application in my portal and being used by nearly 70000 employees.
    Strange issue: 1 of the employee in the application cannot see the group UI element in the Bottom of the page, though I had not made it  invisible or anything. All others could perfectly see all parts of the UI.
    After much investigation and failure, I deleted the Userid and made his ID again, to my astonishment, the problem was solved.
    Did anyone experience this issue and can explain how and why did this happend???
    Ankur

    Hi Ankur,
    The user might have selected the "Remove from Page" option from the menu of the iview on the right hand side. We had the same problem and realised about this after a while. It mus have been the same issue.
    I hope this helps.
    Regards,
    Gopal.

  • Cisco Prime 1.3 applications dashboard not visible

    Dear all,
    I have added a flow exporter from 2 wlc 5508 in direction of our Cisco Prime, under system / data sources i see data from my controllers coming but status is down.
    Addtionally I cannot see under details dashboards the applications dashboard. even if i try to manage dashboards i cannot have applications.
    After checking our license with our reseller he said that we should have this netflow feature,
    But could you explain me why i cannot see the dashboards ?
    Do we need to install or configure a module ?
    Thanks

    Hi ,
    AFAIK , you need to have "assurance licenses " for this.
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • Weblogic application roles not visible

    Hello,
    We are trying to grant a weblogic account the application role BPMWorkflowAdmin using the enterprise manager of the SOA Suite 11g. This works without problems on a non-clustered environment. However, in our clustered environment we cannot see the application roles. When we try to select the Application Stripe, the drop-down list doesn't show any values. Has anybody a clue what is going on?
    Regards, Jeroen

    Hi,
    It is a known issue that file based identity and policy stores will run into synchronization issues in a clustered environment. To avoid this you have to setup the environment using
    1. Shared file system as per the documentation below:
    http://docs.oracle.com/cd/E15586_01/doc.1111/e15483/preconfiguration.htm
    2. Use database or LDAP based identity and policy store
    Please review below metalink id and document for the same issue.
    Roles Missing in system-jazn-data.xml in Node of Cluster [ID 1467202.1] :this suggests to use a centralized LDAP-based or database security store in cluster environment
    Oracle Docuementation reference: http://docs.oracle.com/cd/E21764_01/core.1111/e10043/cfgauthr.htm#CHDEFHHA
    If this helps please mark.
    Regards,
    Kishore

  • IView not visible for a single user

    Hi All,
    I am facing the a problem in our client's portal. The application is not visible for one of our client user on the portal. When he clicks on the Role->Workset->Application name, the IView is not displayed on the screen. Instead, blank page is shown.
    This is happening only to him. Other users are able to see the application and run it. I even tried by removing the roles assigned to him which are related to the application and re-assigned it. But the problem still persists.
    He is facing this problem only from past 2 days. Till then it was working fine.
    Please let me know how can this be solved.
    Regards,
    Poojith MV

    Hi,
    Firstly, we do not have the personalization option on the portal. We also requested the user to try the portal on a different which we thought could be a browser problem.
    However, the result is same on a different machine. But other users who use the same system are able to view the application. I am unable to figure out what could be wrong for just one user?
    The setting "Entry Point" is set to "yes".
    The latest update is that, the user has 2 id's created for himself with the same portal roles. The second user id is working fine, but the first user id is failing to view the application
    Regards,
    Poojith MV

  • Entire Table not visible/ transferred to a file on application server

    HI Experts,
    My req is to pass an entire internal table to a file on the application server.
    How ever some of the fields in the table are not shown / transferred when i check that file.
    The fields are not visible when i try to scroll side wise.
    When I download the internal table to an excel all the fileds are present . There is no problem with the internal table that is being transferred.
    Below is the code snippet.
    CLEAR w_filepath.
        MOVE p_file TO w_file_ext.
        CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
          EXPORTING
            logical_path               = c_zstore
            file_name                  = w_file_ext
          IMPORTING
            file_name_with_path        = w_filepath
          EXCEPTIONS
            path_not_found             = 1
            missing_parameter          = 2
            operating_system_not_found = 3
            file_system_not_found      = 4
            OTHERS                     = 5.
        IF sy-subrc NE 0.
          MESSAGE e068(zz_material).
    *   File could not be downloaded to the application server
        ELSE.
          OPEN DATASET w_filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc NE 0.
            MESSAGE e069(zz_material).
    *   Unable to Open File
          ENDIF.
          CLEAR:rec_final.
          LOOP AT t_final INTO rec_final.
            TRANSFER rec_final TO w_filepath.
            CLEAR rec_final.
          ENDLOOP.
          CLOSE DATASET w_filepath.
    Are there any limitations on the no char that can be displayed in one line on the application server.
    Is there any seeting to change that...?

    Hello Abhishek,
    You are not getting the point. AL11 (prog. RSWATCH0) is a simple report used to display the file contents.
    There is a limitation to the maximum length of the file line AL11 can DISPLAY (i.e., 512 characters after applying the notes).
    Please understand what you are seeing in AL11 is the 1st 512 characters of the file width & not the entire file width.
    Hope you get the point.
    BR,
    Suhas

  • Process is not visible in BPM Workspace in Application panel 2

    Hi dear developers,
    I had a problem about BPM process. I was trying to implement this tutorial -> http://st-curriculum.oracle.com/obe/fmw/obpm/11g/r1/firstProcess/firstprocess_obpm11g.htm#t3
    And all the steps had been done. But the deployment step, i couldn't see my process on the BPM Workspace. I searched the other opinions in the forum. It's completely same with this thread -> Process is not visible in BPM Workspace in Application panel
    Nevertheless, couldn't find anything helpful. Could you help me please?
    Thanks in advance.
    Erdo

    Hi Erdo
    I hope you already ran the demo community seed app to create all the test users and groups etc in the default authenticator. If not, please see this below post:
    Re: New to BPM: How to get the tasks in the Workspace
    1. First login into bpm/workspace with domain adminstrator username/password. Then on right side, click on Adminstration link and see if you could see all the roles related to hello world app and also the users that you added to those roles.
    One other very basic thing is, you should and must deploy the TaskForms project that has all the taskdetails UI pages. I hope you did this while deploying the workflow and checking the check boxes to deploy other ui projects also.
    If seeding and getting demo uses is confusing, you can always use your own users. From weblogic console, create some extra users like weblogic1, weblogic2, weblogic3 etc with some password. Then use these users to assign to the roles from hello world app. Then login with these users. This will also work.
    Thanks
    Ravi Jegga

  • Application WebDynpro ABAP is not visible in Google Chrome

    Hi Experts,
    After the Upgrade 7.3 EHP1  in Production System it is not visible the application developed in web dynpro ABAP, in the Employee Self-Service Portal.
    In the QA and Development,  applications WD ABAP are visible.
    What can happen in the Production system?.
    Thanks in advance.
    Regards,
    Briger

    >
    Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user995809".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    >
    Hi, I've an item with label-
    &lt;font color="rgb(51,102,153)"&gt;&lt;b&gt;Heading: &lt;/b&gt;&lt;/font&gt;
    Font color is coming in IE but not in google chrome(19.0.1084.52 m). what should I do?
    >
    To start with, always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
    Secondly the <tt>font</tt> element was deprecated 14 years ago and is now obsolete. Do not use it. Stop using any reference material that suggests using it.
    <tt>rgb(51,102,153)</tt> is a CSS colour value, which the HTML specification does not require user agents to support for legacy <tt>colour</tt> attributes.
    Use standards-based HTML and CSS:
    <span style="color: rgb(51,102,153); font-weight: bold;">Heading:</span>

Maybe you are looking for