Application diagnostics taking too much time

EBS Version : 12.1.3
Application diagnostics taking too much time. How do i investigate why its taking too much time? and then also I want to know How do i cancel this request?

Application diagnostics taking too much time. How do i investigate why its taking too much time? and then also I want to know How do i cancel this request?
Is this happening for all diagnostics scripts or specific one(s) only?
E-Business Suite Diagnostics Installation Guide (Doc ID 167000.1)
E-Business Suite Diagnostics References for R12 (Doc ID 421245.1)
E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12 (Doc ID 235307.1)
You can it from OAM and you might need to cancel the database session from the backend as well.
Thanks,
Hussein

Similar Messages

BPC application is taking too much time to load

Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PM

Hi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps,

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

Client import taking too much time

hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client           650
Copy Type               Client Import Post-Proc
Profile                 SAP_CUST
Status                  Processing...
User                    SAP*
Start on                24.05.2009 / 15:08:03
Last Entry on           24.05.2009 / 15:36:25
Current Action:         Post Processing
- Last Exit Program    RGBCFL01
Transport Requests
- Client-Specific       PRDKT00004
- Texts                 PRDKX00004
Statistics for this Run
- No. of Tables             19803 of     19803
- Deleted Lines                 7
- Copied Lines                  0
sm50
1 DIA 542           Running Yes             SAPLTHFB 650 SAP*
7 BGD 4172   Running Yes 11479 RGTBGD23 650 SAP* Sequential Read     D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time   User Report   Action          Table
prdsap_PRD_00 7 BTC 4172 Running   Yes    11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
Khan

The import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus

Server0 process taking too much time

Hi All,
Once i start the Netweaver server, the server) process taking too much time.
When i was installed Netweaver that time 13 min, after 2 months 18 min.. then 25 min now it is taking 35 minutes.... to become green color.
Why it is taking too much time, what might be the cause.....
Give some ideas to solve this problem..............
The server0 developer trace has this information continuously 6 to 7 times...
[Thr 4204] *************** STISEND ***************
[Thr 4204] STISEND: conversation_ID: 86244265
[Thr 4204] STISEND: sending 427 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STISEND: send synchronously
[Thr 4204] STISEND GW_TOTAL_SAPSEND_HDR_LEN: 88
[Thr 4204] NiIWrite: hdl 0 sent data (wrt=515,pac=1,MESG_IO)
[Thr 4204] STIAsSendToGw: Send to Gateway o.k.
[Thr 4204] STIAsRcvFromGw: timeout value: -1
[Thr 4204] NiIRead: hdl 0 recv would block (errno=EAGAIN)
[Thr 4204] NiIRead: hdl 0 received data (rcd=3407,pac=2,MESG_IO)
[Thr 4204] STIAsRcvFromGw: Receive from Gateway o.k.
[Thr 4204] STISEND: data_received: CM_COMPLETE_DATA_RECEIVED
[Thr 4204] STISEND: received_length: 3327
[Thr 4204] STISEND: status_received: CM_SEND_RECEIVED
[Thr 4204] STISEND: request_to_send_received: CM_REQ_TO_SEND_NOT_RECEIVED
[Thr 4204] STISEND: ok
[Thr 4204] STIRCV: new buffer state = BUFFER_EMPTY
[Thr 4204] STIRCV: ok
[Thr 4204] *************** STSEND ***************
[Thr 4204] STSEND: conversation_ID: 86244265
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STSEND: new buffer state = BUFFER_DATA
[Thr 4204] STSEND: 106 bytes buffered
[Thr 4204] *************** STIRCV ***************
[Thr 4204] STIRCV: conversation_ID: 86244265
[Thr 4204] STIRCV: requested_length: 16000 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STIRCV: send 106 buffered bytes before receive
[Thr 4204] STIRCV: new buffer state = BUFFER_DATA2
[Thr 4204] *************** STISEND ***************
then
[Thr 4252] JHVM_NativeGetParam: get profile parameter DIR_PERF
[Thr 4252] JHVM_NativeGetParam: return profile parameter DIR_PERF=C:\usr\sap\PRFCLOG
this message continuously
Can i have any solution for the above problem let me know .
Thanks & regards,
Sridhar M.

Hello Manoj,
Thanks for your quick response, Previously the server has 4GB RAM and now also it has same.
Yesterday i found some more information, like deployed(through SDM) applications also take some memory at the time of starting the J2EE server...Is it right?
Any other cause...let me know
Thanks & Regards,
Sridhar M.

Initramfs too slow and ISR taking too much time !

On my SMP (2 core with 10siblings each) platform i have a PCIe deivce which is a video card which does DMA transfers to the application buffers.
This works fine with suse13.1 installed on a SSD drive.
When i took the whole image and created it as a initramfs and running from it (w/o any hdd) the whole system is very slow and i am seeing PCIe ISRs taking too much time and hecne the driver is failing !
any help on this is much appreciated.
there is a first initramfs iage which is the usual initrd the opensuse installs and i patched it to unpack the second initramfs (full rootfs of 1.8GB) in to RAM (32GB) as tmpfs and exec_init from it.
Last edited by Abhayadev S (2015-05-21 16:28:38)

Abhayadev S,
Although your problem definitely looks very interesting, we can't help with issues with suse linux.
Or are you considering to test archlinux on that machine ?

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Taking too much time in Rules(DTP Schedule run)

Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sree

Hi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Taking too much time using BufferedWriter to write to a file

Hi,
I'm using the method extractItems() which is given below to write data to a file. This method is taking too much time to execute when the number of records in the enumeration is 10000 and above. To be precise it takes around 70 minutes. The writing pauses intermittently for 20 seconds after writing a few lines and sometimes for much more. Has somebody faced this problem before and if so what could be the problem. This is a very high priority work and it would be really helpful if someone could give me some info on this.
Thanks in advance.
public String extractItems() throws InternalServerException{
try{
               String extractFileName = getExtractFileName();
               FileWriter fileWriter = new FileWriter(extractFileName);
               BufferedWriter bufferWrt = new BufferedWriter(fileWriter);
               CXBusinessClassIfc editClass = new ExploreClassImpl(className, mdlMgr );
System.out.println("Before -1");
               CXPropertyInfoIfc[] propInfo = editClass.getClassPropertyInfo(configName);
System.out.println("After -1");
          PrintWriter out = new PrintWriter(bufferWrt);
System.out.println("Before -2");
          TemplateHeaderInfo.printHeaderInfo(propInfo, out, mdlMgr);
System.out.println("After -2");
XDItemSet itemSet = getItemsForObjectIds(catalogEditDO.getSelectedItems());
Enumeration allitems = itemSet.allItems();
System.out.println("the batch size : " +itemSet.getBatchSize());
XDForm frm = itemSet.getXDForm();
XDFormProperty[] props = frm.getXDFormProperties();
System.out.println("Before -3");
bufferWrt.newLine();
long startTime ,startTime1 ,startTime2 ,startTime3;
startTime = System.currentTimeMillis();
System.out.println("time here is--before-while : " +startTime);
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --new: " +startTime1);
bufferWrt.write(aRow.toCharArray());
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
startTime3 = System.currentTimeMillis();
System.out.println("time here is--after-while : " +startTime3);
               out.close();//added by rosmon to check extra time taken for extraction//
bufferWrt.close();
fileWriter.close();
System.out.println("After -3");
return extractFileName;
catch(Exception e){
               e.printStackTrace();
throw new InternalServerException(e.getMessage());

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
            while(allitems.hasMoreElements()){
            String aRow = "";
                XDItem item = (XDItem)allitems.nextElement();
                for(int i =0 ; i < props.length; i++){
                     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

Taking too much time and not connecting to ipad software server

taking too much time and not connecting to ipad software server and not updating.. why

because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

Application diagnostics taking too much time

Similar Messages

Maybe you are looking for