Application does not load correctly when deploying to standalone server

All,
I have created simple application implementing fusion theme. Applicaiton works fine when I run on integrated server but when deployed on standalone server it does not load any images or the theme itself. afrloop keep incrementing in status bar and ends up with java script error while later.
I deployed another test application on standalone server and that works fine i.e. theme gets loaded correctly. Also, how should I include images on the page? I have a images folder in web content folder but they dont get loaded.
Any help will be appreciated.
Thanks,
Dipal

LabVIEW now uses the Microsoft installer. It's possible that you need to upgrade the version that's on the Win2K box. I think the latest service packs from Microsoft include it.

Similar Messages

Mozilla Addons site does not load correctly in IE - impala-min.js

It seems that the Mozilla Addons website does not load correctly any more in IE and the errors below are generated on XP (IE8), Windows 7 (IE9) and Windows 8 (IE10). It seems to be a JavaScript error from the messages from webpage error popup.
Browsing any addon specific page (NoScript, Menu Editor, Flashblock, etc) all seem to hang with the
'loading-more.gif' graphic showing constantly and none of the lower tabs (Version Information, etc) will open to show information.
I know technically this isn't a Firefox issue but I use IE to check version compatibility of addons before loading in Firefox. Perverse I know but hey it works, or used to until very recently.

This wasn't a question about loading Firefox extensions in IE which would not have a clue about the contents of the .XPI file.
This was about an error on the addons page which seems to stop ANY of the pages from showing details of the extension such as user reviews, developer feedback and version history...
Viewing from Firefox they just show as compatible and versions over 3.6 but from IE you could see what versions the extension was compatible with, ie 9 thru 15 which is far more helpful when deciding which to deploy in a workplace.
Have tried this on four different machines with the same outcome for viewing in IE!

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Media out or not loaded correctly when attempting to print since iOS 7 upgrade?

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Oops - spry menu bar 2.0 does not display correctly when loaded

Oops - obviously I'm new at this. I think I got my graphics loaded now.
Dear Sirs:
I notice bzz31 had a pretty complicated post, so perhaps someone can help me with my complicated problem that has been vexing me for months. I tried the Spry Menu Bar 1.0, but it was impossible for me to edit, and I was delighted to see Spry Menu Bar 2.0 come out. However the 2.0 version has been frustrating me as well.
I can get my menu bar to display properly in Live View, as shown below.
However when I load everything onto the server, the menu bar does not display correctly, as shown below:
I don't quite understand the code "file:///" but I interpret it to mean that the Spry-UI-1.7 folder is in the topmost folder of MacPro5-Docs, which is my hard drive. Here's the code I'm having trouble with:
Here's my computer directory, shown below:
Since my index file is two folders down from Spry-UI-1.7, I loaded the files onto the server similarly, as shown in the next three pictures:
(The picture below is the same as the one just above, but now you can see the path from index to Spry-UI-1.7.)
I would be most appreciative if someone can help me.
Thank you.

Have a look at the following links
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<link href="file:///MacProG5-Docs/Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
Each of the above points to a file on your local system and cannot be found by the remote server.
Replace the red coloured parts with http://www.twhsbands.org/ will remedy the situation.
You also have some remnants of the other SpryMenuBar that should be removed from your markup.
Gramps
Wel, so much for the red coloured parts, they did not show up.
The red coloured parts read file:///MacProG5-Docs/

Page does NOT load correctly in FIREFOX

My HOME page does not RELOAD correctly in FIREFOX when when
the link is clicked on from another page in my little "2 page"
site.
BUT if I click on the BACK button it loads CORRECTLY
It works correctly in IE
Here is the Home page:
http://www.quicksubmitbrokerswholesale.com/
Here is page 2 where clicking on the link in FIREFOX loads
incorrectly:
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
What do I need to TWEAK to make it work OK in FIREFOX?
Thanks in advance

Here is the crux of all your problems:
<!-- Fireworks 4.0 Dreamweaver 4.0 target.
You built the site in Fireworks, and a very old version at
that, and then
imported the site into DW. Graphics apps like Fireworks and
Photoshop
produce bloated, convoluted code and fragile structures. If
you want a
worthwhile site you will have to start over. Create only your
graphics in FW
and build the entire site in DW. Be cautioned though such an
old version of
DW won't produce a site consistent with today's standards.
You really should
upgrade if you want to deliver value to your client.
Walt
"electro-dud" <[email protected]> wrote in
message
news:gb2k07$9v4$[email protected]..
> My HOME page does not RELOAD correctly in FIREFOX when
when the link is
> clicked
> on from another page in my little "2 page" site.
> BUT if I click on the BACK button it loads CORRECTLY
>
> It works correctly in IE
>
> Here is the Home page:
>
http://www.quicksubmitbrokerswholesale.com/
>
> Here is page 2 where clicking on the link in FIREFOX
loads incorrectly:
>
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
>
> What do I need to TWEAK to make it work OK in FIREFOX?
>
> Thanks in advance
>
>

JSP / HTML page does not load correctly in IE

I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]

Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam.

Trayer does not Adjust correctly when Switching to External Monitor

Hello
I use a laptop with xmonad and xmobar and trayer. When i connect my external monitor via VGA, i set it to primary. My xmobar moves perfectly to the top of my external monitor, with a width of 90% of the screen, as specified in my xmobarrc. However, trayer acts differently. It does move to my external monitor, however, its position overlaps with xmobar, and does not move correctly to the remaining 10% of the screen left by xmobar which i would like trayer to occupy.
How can i make trayer move correctly?
Thank you!
Last edited by fawkes5 (2013-01-09 19:10:51)

Hello again. If i start my external monitor when i startx (i.e through .xinitrc) then it sets correctly. So its just the dyanmic changing of resolution that trayer has trouble adjusting with.
Last edited by fawkes5 (2013-01-11 00:35:28)

Icloud application does not load

I have been using two lap tops.. one running windows 7 and the other windows XP.
Regularly I can not access my icloud account -
1. It does not load the application and
2. Unable to access the server
I've looked at all the control panel settings and privacy settings.. but I find nothing. To add to the mystery is .. sometimes it loads just fine.
I am in India and the internet is "wonky" to say the least. That is my default answer but it was so bad this morning that I had to submit the question to see if it is something else in the settings I need to change.
Any insights out there??
kleen

I have the same problem. Clicking iCloud in the preference pane results in the follow:
"Preferences Error could not load iCloud preference pane."
I don't use iCloud, and would prefer to completely disable it. However now I am receiving a "log into iCloud" pop up every time I start my computer that is very annoying.
See screenshots below. Please help.

HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

Mail application does not work after upgrade to Mavericks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

I have just upgraded to firefox 4, but it does not load up when i press icon

originally, i upgraded directly frm firefox site and it launched. then after shutting down, it has not loaded up since. i have deleted the old firefox off my laptop and attempted to re-install, but no luck. it still does not load up.
i have windows 7, and see the spinning wheel (like it is doing something), but nothing happens.

Just for starters see if you can get Firefox going. Instead of double Left clicking, Right click on Firefox icon>Open.
If that doesn't work, try opening via Firefox in the Start Menu or Programs List. If that works try creating a new desktop icon.
Then you try to start Firefox in Safe Mode - Hold down the Shift Key as you double click on the Icon> don't check any of the boxes on the page that appears>Continue. You have now disabled all extensions and also Hardware Acceleration.
Make sure your plug-ins such as Flash are up-to-date.
http://www.mozilla.com/en-US/plugincheck/
You should look up "Problematic Extensions"
http://kb.mozillazine.org/Problematic_extensions ,
and try disabling third party toolbars.
If Firefox works in Safe Mode you have a culprit or conflict. If you are able to, you disable and re-enable extensions progressively until you find the problem. you will need to work your way through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Please report back.

Programme does not work correctly when built as an application

My programme operates correctly when in development, but when built into an application it fails to function with regard to closing and opening front panels. I am using 'open VI referance' and 'property node virtual instrument Front panel open' to close and open front panel, it is this area that seems to fail.
Do I have to do anything special with VI's that contain Server Functions?
Any help would be appreciated. I am using LABview 5.0 with its Application Builder.
Many Thanks

Hi Dennis,
It is very difficult to understand the problem here.
1. Could you please explain what you mean when you say "it fails to function with regard to closing and opening front panels" ?
2. It may also help if you can attach your program so that I can take a look at it.
3. What is the program intended to do?? I mean, is it some sort of serial application etc.??
I hope to solve your problem soon.
Sincerely,
Sastry V
Applications Engineer

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Router webpage does not load correctly

I own a wireless WRT54G, which has worked fine in the past. After setting up a new wireless network, I went to the router webpage to open some ports. The problem with the page loading is that it doesn't display correctly. No clickable text is displayed on the top of the page or the side bar, so I basically can't do anything whatsoever to configure it. I've tried loading it up in both Firefox and Internet Explorer, with IE saying the page loaded but with errors. Any help would be much appreciated.

I did not understand what you meant when you said "After setting up a new wireless network". What new wireless network did you set up?
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Jar not loaded Error when deploying weblogic.jar in tomcat

Hi experts,
This time i have one more problem,
i have deployed my application in tomcat such that when tomcat starts my java program also gets started, for my java program i had to use a weblogic library which is in "web-inf / lib / weblogic.jar" . but when i start tomcat i get error like
INFO: validateJarFile (C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MyApp\WEB-INF\lib\weblogic.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
Dec 4, 2006 8:27:18 PM org.apache.catalina.core.StandardPipeline registerValve
INFO: Can't register valve org.apache.catalina.core.StandardContextValve@1362012
org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@1bc82e7 for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@1bc82e7
for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category))
        at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
what could be the problem in loading weblogic.jar
my platform configuations are
TOMCAT 5.5
OS - windows 2000

          have u done the servlet naminga and mapping in the web.xml file??
          Kumar Allamraju <[email protected]> wrote:
          ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
          ><html>
          >Have you registered the servlet in web.xml?
          ><p>--
          ><br>Kumar
          ><p>Deepak Balakrishna wrote:
          ><blockquote TYPE=CITE>Hi.
          ><p>I am having trouble deploying a servlet to WLS 6.1
          ><p>a) The name of the servlet is HaServlet and it's duly noted in web.xml
          ><br>b) I created a directory
          ><br>config/examples/applications/cluster-servlet/WEB-INF
          ><br>c) Added web.xml under WEB-INF/. web.xml was created using the weblogic
          ><br>DDInit CLI
          ><br>d) Added the servlet classfile (HaServlet.class) under
          ><br>WEB-INF/classes/samples/cluster/servlet/.
          ><br>e) Tried to access it by http://host:port/cluster-servlet/HaServlet
          ><p>I get
          ><br>Error 404--Not Found
          ><p>What am I missing? I also tried restarting the app server to no avail.
          ><p>Thx,
          ><br>- deepak</blockquote>
          ></html>
          >

Application does not load correctly when deploying to standalone server

Similar Messages

Maybe you are looking for