Application files are corrupted. How do I reinstall application files?

I own the macbook Pro. My application files are corrupted. How do I reinstall them?

"Any more ideas?"
The point of my reply was for you to apply the 10.3.9 Combo Update over your installation. Repairing Permissions is always a good idea before and after any update or upgrade. Did you try this and still having Java problems/errors?
This will not harm anything to apply the Combo update over your OS.
You did not post which version of 10.3 you are using but you may wish to check to see if this Apple Knowledge Base article applies to your situation:
http://support.apple.com/kb/TS1537
littleshoulders
Message was edited by: littleshoulders

Similar Messages

  • MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

    ? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print.  My MacBook Pro works fine with same wireless printer.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • My purchases are corrupt, how can I re-download them?

    A lot of my files of puchased music became corrupt. How can I re-download them and keep all the data ie: play counts, ratings ect.? When I go to download them they are marked "downloaded". What's up with that?

    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track (and the original file) and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773, especially unchecking the "Allow Simultaneous Downloads" box in the downloads tab of iTunes.
    This will reset your playcount, ratings, and date added since you are essentially adding them as new tracks again.  I don't know if a way for you to keep those without typing in 2 pages of instructions on using Applescript.

  • Bootcamp corrupt , how can I reinstall?

    I was going to use bootcamp to copy a windows ISO image to a USB stick and read that I can modify the Plist file under Bootcamp by removing the "Pre" infront of the USB section in the Plist.
    Now Bootcamp will not restart.
    can someone help?
    I get the following:
    Process:               Boot Camp Assistant [89374]
    Path:                  /Applications/Utilities/Boot Camp Assistant.app/Contents/MacOS/Boot Camp Assistant
    Identifier:            com.apple.bootcampassistant
    Version:               ???
    Build Info:            BootCampAssistant-5846000000000000~2
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Boot Camp Assistant [89374]
    User ID:               503
    Date/Time:             2015-03-18 22:56:09.077 -0400
    OS Version:            Mac OS X 10.10.2 (14C109)
    Report Version:        11
    Anonymous UUID:        45F6C36A-4778-1184-94A6-19C9F22E57F0
    Sleep/Wake UUID:       4B8137B7-00E6-4841-8164-FF494D196EAD
    Time Awake Since Boot: 200000 seconds
    Time Since Wake:       11000 seconds
    Crashed Thread:        0
    Exception Type:        EXC_CRASH (Code Signature Invalid)
    Exception Codes:       0x0000000000000000, 0x0000000000000000
    kernel messages:
    VM Regions Near 0x7fff77f3c0a8 (cr2):
        __LINKEDIT             00007fff6fb00000-00007fff6fb14000 [   80K] r--/rwx SM=COW  /usr/lib/dyld
    --> Submap                 00007fff70000000-00007fff80000000 [256.0M] r--/rwx SM=PRV  process-only VM submap
        unused shlib __DATA    00007fff76531000-00007fff78ad4000 [ 37.6M] rw-/rw- SM=COW  system shared lib __DATA not used by this process
    Thread 0 Crashed:
    0   dyld                           0x00007fff6fa91000 _dyld_start + 0
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x000000000000000d  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
      rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x00007fff547ccb10
       r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
      r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
      rip: 0x00007fff6fa91000  rfl: 0x0000000000000201  cr2: 0x00007fff77f3c0a8
    Logical CPU:     0
    Error Code:      0x020000f4
    Trap Number:     133
    Binary Images:
        0x7fff6fa90000 -     0x7fff6fac6837  dyld (???) <65DCCB06-339C-3E25-9702-600A28291D0E> /usr/lib/dyld
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 90238
        thread_create: 0
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=300K resident=228K(76%) swapped_out_or_unallocated=72K(24%)
    Writable regions: Total=8416K written=0K(0%) resident=12K(0%) swapped_out=0K(0%) unallocated=8404K(100%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    STACK GUARD                        56.0M
    Stack                              8192K
    VM_ALLOCATE                           8K
    VM_ALLOCATE (reserved)                4K        reserved VM address space (unallocated)
    __DATA                              228K
    __LINKEDIT                           80K
    __TEXT                              220K
    mapped file                         248K
    shared memory                         4K
    ===========                      =======
    TOTAL                              64.8M
    TOTAL, minus reserved VM space     64.8M
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
    Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5670SC
    USB Device: Hub
    USB Device: Disk
    USB Device: Keyboard Hub
    USB Device: Apple Keyboard
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: USB Receiver
    USB Device: IR Receiver
    USB Device: Built-in iSight
    Thunderbolt Bus:

    The codesign command needs --deep qualifier on the command line. Please see https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/codesign.1.html for an explanation of the --deep qualifier.
    Forcing a USB to be created from BC Assistant leads to errors further when you get black screens or no bootable device errors. This is a bad road to travel.

  • How do you reinstall elements 12 in windows 7 ?

    My elements 12 program is corrupt how do I reinstall the program

    Press Ctrl+Alt+Del and go to Task Manager
    Select the Applications tab. If Elements is still shown as running, highlight and click End Task to force quit.
    You can use the link below to download PSE12 if you have your product serial number. It’s probably best to uninstall first by going to the Windows Control Panel.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  • How do I reinstall an Adobe application from its .dmg file

    I have inadvertantly deleted the icon to open Adobe Dreamweaver, however I do have a .dmg copy of the application. How do I reinstall Dreamweaver from the .dmg file?

    Steph44 wrote:
    I have inadvertantly deleted the icon to open Adobe Dreamweaver
    Where? From the Dock or the Applicaitons folder?
    The Dock icons are "aliases" or "shortcuts" to the original files  or programs, in this case in your Applications folder.
    Just drag the Adobe Dreamweaver icon out of the Applications folder and position it on the Dock in the old location, it will make another "alias" and the original returns to the Application folder.
    If it's gone from your Applicaiotns folder, look in your Trash can and put it back in the Applicaitons folder
    If not there then open the DMG by double clicking on it and double clicking on the installer file to reinstall it.
    You'll have to update the program and likely enter your serial again.

  • How can i reinstall Products again - as they are all corrupted and don't work ?

    Hi i really need an answer to this- i had to roll back the regsitry becuase kept getting a blue scree as soon as the PC started (after i downloaded the creative cloud apps) - and now theres no entry on start menu for any cloud products and there are no .exe files either to run them - but the Adobe creative cloud application manager says they are all installed - so i cannot download them again ?    Even if i remove the adobe product folders - the application manager still says they are installed -
    How can i download them again to the very same computer ? What is the application manager using to decide i have them installed on my computer- when in fact they are not?
    I already raised this same question on the other forum but with no reply-
    http://forums.adobe.com/thread/1100999 
    so im trying here .

    Please use the Cleaner Tool to uninstall the softwares completely.
    Since you tried deleting the folders manually before, please also try uninstalling Application manager and then try reinstalling by downloading the Adobe Application Manager again.

  • I am receiving a message that "your application files are corrupted!

    I am receiving the following message "Your application files are corrupted! For security reasons please reinstall the application"
    What application is it?  I cannot get further information.

    This message is coming from what source?

  • Your application files are corrupted!

    I recently purchased a new MacBook Pro.  I also have a three year old MacBook Pro that the new one is replacing.  When the new one was removed from the box, it was running fine.  It also asked me some questions concerning it being a replacement, so I said 'sure' and it wanted me to run the Migration Assistant.  So I ran the Migration Assistant for the next four hours.
    When it was completed, it said everything was copied successfully.  Now, whenever I log onto the new MacBook, I receive the following error message:
    "Your application files are corrupted!  For security reasons please reinstall the application."  Then there is an OK button.
    I have tried reinstalling the application files (I think).  Also, it only happens when I logon.  So, I made a new account thinking the account may be the problem, but the new account shows the same error message.  I tried holding down the Shift key until the progress bar appeared, but still no luck.
    The old MacBook ran, or still runs fine and error free.  What is my next step?
    Thank you.

    Recovery Mode and reinstall.
    Or erase and reinstall.
    You are not on a MacBook Pro forum.
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    http://www.apple.com/support/macbookpro
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because
    the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    About TimeMachine backups and Recovery Mode
    http://support.apple.com/kb/HT1427
    http://www.apple.com/osx/recovery/
    OS X Lion and later let you:
    Start from OS X Recovery using your Time Machine backup disk. With OS X v10.7.3 and later, Time Machine backs up the Recovery System on your Mac to your backup drive as well. This lets you use your Time Machine drive to start up your Mac if needed.
    OS X Recovery:
    http://support.apple.com/kb/ht4718
    OS X Internet Recovery
    Mac models introduced after public availability of OS X Lion include the ability to start up directly from an Internet-based version of the OS X Recovery system. OS X automatically uses this feature when the Recovery System on the hard disk isn't available (such as when your hard disk encounters an issue, or when your hard disk has been replaced or erased). OS X Internet Recovery lets you start your Mac directly from Apple's servers. Starting up from this system performs a quick test of your memory and hard drive to check for hardware issues.
    OS X Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, entering a passphrase. Next, OS X Internet Recovery downloads and starts from a Recovery System image. From there, you are offered the same utilities and options as a local Recovery System.
    Requirements for reinstalling OS X using Recovery
    Reinstalling OS X using OS X Recovery requires broadband access to the Internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the Internet from Apple when OS X Recovery is used for reinstallation
    If you use Internet Recovery to reinstall OS X, it installs the version of OS X that originally came with your computer. After installation is finished, use the Mac App Store to install related updates or later versions of OS X that you have previously purchased.

  • How do I reinstall application files?

    What do I do to reinstall my application files? They are corrupted.

    Bishopstew,
    delete the ones which are currently corrupted, and then reïnstall them in the same way as they’d been installed originally.

  • How to restore from back up when some files are corrupt and crash the restore?

    iphone 4 16gb
    IOS 5.0.1
    iTunes 10.5.3
    History:
    installed iOS5 back on release date. install was interrupted, likely due to high volumes. Completed install. Initial problem noted: unable to add events to calendar. Then problem progressed to "Voice Memo" app crashing. I installed "Quick Voice" app as an alternative. Problem progressed further to an unexplained increase in "other" content on iphone. Last week I tried syncing my phone and received error message that I didn't have enough space to complete sync. Noted then that "other" content was around 5.4gb! Removed "voice memos" playlist from selected playlists to sync under music tab and noted that other content dropped to 4.5gb
    Synced the phone and noticed that it appeared to move through the sync process faster than usual. Sync showed "audio" content and "other" content to be the same size at about 4.5gbs.
    After sync was completed I disconnected the phone and looked at the content of my phone. No apps, No music, No photo albums! SMS texts, Notes and Contacts still all intact on phone.
    Tried multiple solutions including restore to fix the problem. Each time, when the phone is plugged in and mounted in iTunes, it shows audio content at 4.5gb and other content at 4.5gbs yet the phone itself has no music, no apps and no photo albums. It does still have pictures in "camera roll", though.
    After trying many suggested solutions, I gave up and went to Apple store to see the Geniuses (Genii ) They did a firmware update and reset my phone. I was advised to restore from back up. However, when I tried to restore from my back up, it would fail to complete. Unable to restore from back up and sync attempts fail.
    The only data I really don't want to lose is my text message history, my notes and my voice files from "Quick Voice" app.
    Restoring from back up is not an option since I believe there are corrupt files in the back up. So what I want to know is can I restore my phone as a new phone, and then re-install my text message history, notes and the sound files from the "Quick Voice" app? Perhaps using a 3rd party app to retrieve those particular files from my back up and copy them to the phone directly? Or can I create a new back up file and copy those files to the new back up file. Hopefully I would then be able to restore from the newly created back up successfully since the likely corrupt files will be in the old back up file?
    All other information; apps, photos, music and contacts can be re-installed from iTunes.

    Sigh....
    And it just keeps getting stranger! I just disconnected the internet and opened iTunes on my Mac. It opens just fine when disconnected from the internet. iTunes crash seems to be caused when it's trying to connect to iTunes store????
    Really need help!
    1) Why is iTunes crashing when connected to internet?
    2) If I am unable to restore from my back up due to corrupted files within the back up, how can I preserve my text messages, notes and "Quick Voice" app files?

  • I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • I am having all these problems after webroot did a clean up of files; I was able to find the files; all are firefox files, how do I reinstall these files?

    I am having all these problems; yahoo is not the same, cannot do anything on facebook; I found the files that were "cleaned" and they were all firefox files, there are many more in que to be "cleaned" by webroot; how do I reinstall these files? How do I stop webroot from continuing this "cleanup" I emailed webroot but got no reaponse.
    Thank you,
    Donna

    You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.

  • How can I reinstall a corrupted Safari application?

    Since the initial installation of OS X 10. Mountain Lion, I receive a popup that "Safari 6.0 has not been tested with the plugin LastPass 1.74.0 (v174.0).  As a precaution, it has not been loaded.  Please contqact the plugin developer for information."
    I have attempted to contact LastPass MANY times without any response.  LastPass was taken off the computer over a year ago without any problems until the installation of OS X 10 LION. 
    Can you help with this continous irritation when opening Safari? 
    Thanks,
    Royce Thomas
    file://localhost/Users/royce/Desktop/Safari%20Error.pdf

    I finally answered the question ABOVE …  How Can I reinstall a Corrupted Safari Appilication?
    I once again went to LASTPASS website and they have posted a "FIX" for the problem.
    GoTo:  file://localhost/Users/royce/Desktop/https-::rodan.lastpass.com:lpsafari.dmg.we bloc
    Download and run the UNInstall program you will find there.
    I hope this helps others experiencing the same problem.

  • HT4623 The software pages and numbers are corrupt. How can I download software again to reinstall on iPad.

    I downloaded pages and numbers via iTunes on my laptop, then transferred to iPad.  Software is corrupt  it won't open. On the laptop it tells me the dies are corrupt.  How do I download then again since the corrupt versions are in iTunes.

    You can only do this via iTunes. Remove the ones in iTunes and redownload.
    Note that there are different versions for iDevices and computers. They cannot be interchanged, and they must be purchased separately.

Maybe you are looking for

  • S20 *new* RAID config for retail Windows 7 install...questions

    I’ve recently ordered a S20 and I have a few questions about my situation/configuration, if anyone has the knowledge and time, I'd really appreciate it. I’ve configured the workstation to be shipped without an installed OS, a single SATA hard drive,

  • Separate iTunes accounts with family sharing

    I would like to keep my children's iTunes accounts separate as they use gift cards to pay for their purchases.  Is this possible with Family Sharing?

  • How can i sync notes on ipad and iphone using itunes?

    how can i sync notes on ipad and iphone using itunes? it used to work with me before upgrading to mountain lion.

  • Outline view bug?

    Maybe 8 times out of 10, when I click an entry in the Outline view, it jumps to some random thing near the top of the list.  Does this happen for anyone else?  It happens to me in every file, every project where the outline is long enough to need to

  • How to Add a Variable created in New Query Designer

    Friends i am able to create variable on a char and i am unable to attach it to it. Any specific options that i need to set it so that i get the selection screen. Regards Vijay