Application icon don't appear
I installed Tarantella on remote systems
Os- Xp home, win98. and I am unable to see the icons in Tarantella
Noel wrote:
I installed Tarantella on remote systems
Os- Xp home, win98. and I am unable to see the icons in Tarantella
Tarantella is a company, not a product :-)
Are you in the position to disclose:
. the product you're using (eg, SGD Enterprise Edition or Terminal
Services Edition)
. if you're using TSE, this is the wrong group
. the release of the product (eg, 3.42, 4.0, 4.10 for EE or 2.0, 2.1 or
4.0 for TSE)
. the version of the JRE installed on the client
Best,
Roberto
Roberto Zini - r.zini<@AT@>strhold.it
"Has anybody around here seen an aircraft carrier?"
(Pete "Maverick" Mitchell - Top Gun)
Similar Messages
-
My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
AIM Application Icon does not appear when using Today Theme
When using the 'BB Dimension Today' theme that came with my Blackberry Curve, the AIM application icon does not appear. If I change back to any of the other themes, the icon reappears. Any ideas as to why this is the case, or how I can use both the 'Today' theme as well as AIM?
Thanks!Welcome to the Frums
Are they hidden behind another icon ? or just hidden (click menu and show all). Sometimes that happens.
Nurse-Berry
Follow NurseBerry08 on Twitter -
When I try to connect to my application icon it states "cannot connect to itunes store" why and how can I fix it
also, how do you connect to internet, cellular data network or wi-fi....you might also try it with wi-fi turned off and see if it works over the cell data network..this would eliminate any proxy issues with the wi-fi network...
-
Menu bar and hard drive icon don't appear at last stage of boot up
Machine froze trying to print a PDF document off a flash drive in Preview. Had to power off the machine. Upon restart, everything came back to life fine until the very end of the boot up process (chime fine, desktop background pictures appeared, main side tool bar program icons fine) when the top Menu title bar didn't appear nor the hard disk icon. Spinning beach ball. Never would finish the boot up process; seemed like it was still trying to finish the print job from before.
Unplugged the networked Laserjet printer, unplugged computer power, restarted. Same result. Everything is perfect for 98% of the boot process until the end. Ran Disk Utility "verify disk" and it found a couple of items. Repaired successfully. Ran "verify permissions" and found quite a few wrong. Repaired successfully. Still same problem.
Any ideas? I hate to reinstall the OS with it so close to being just fine. Machine has been very solid and stable in the current configuration. I do have a 2nd internal hard drive that has 10.3.9 on it that I can use in a pinch.
Power Mac G4 silver tower, Dual 1ghz, 2GB RAM, 10.4.11 with OS 9.2.2While in Safe Mode, try this...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
Reboot & test.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I have a problem with cleanmymac that makes some of native app stop working. I reinstalled OS X Mav´s and everything seems to be ok, but the iWorks apps stop working then...so I reinstalled and everything were ok again....By now keynote works fine but the icon only appears on the dock, but not on the launchpad. How can I solve this?
I went to Apple store and the girl there told me that the problem will be solved when upgrade to OS X Josemite????? I think she doesn´t know how to solve the issue.
Any advice?Siri must be turned on, you must be connected to the Internet, and you must be in one of these countries:
-
Homemade folder icons don't appear in dock
Folder icons I've created myself and converted from img files to icns showed up fine as dock aliases on my old G5. But they haven't made the transition to the new iMac dock. Reason?
This looks like it is tied to a different issue which is a runaway Quick Look Helper. For some reason it will occasionally fire up and use about 175% of my CPU capability. When it does that, the whole thing slows down and the icons won't show. When I use activity monitor to quit QLH, all returns to normal... until the next time. Anybody know anything about QLH?
-
My application portlets don't appear in the liferay portal ?
I'm trying to use liferay portal with a jsf project already created on another machine.
I installed the liferay successfully on Tomcat Apache 5.5.
I followed all the installation steps from the liferay website & they're all successful, i tried (http://localhost:8080) and it ran successfully.
Now came the step of importing my app in liferay ... I've put the (*.war) file of my app. in (webapps) folder in the liferay folder .
I also created (lportal) mysql db & imported the previous portal db in it, & edited the connection file to it in liferay(ROOT.xml).
Now i ran (startup.bat) for liferay .... liferay starts successfully in the browser but empty .... no portlets !!
Only the portlets names appear but no portlets at all(except the liferay default portlets).
When i try to access any of the portlets of my app. in the browser, the following error appears in the console :
WARN [com.liferay.portal.service.impl.PortletLocalServiceImpl] Portlet not found for 182 portlet1Name_portlet_WAR_myappName
WARN [com.liferay.portal.service.impl.PortletLocalServiceImpl] Portlet not found for 182 Portlet2Name_portlet_WAR_myappNameI tried this with liferay v(4.2) & v(4.3) and they give the same errors.
am i missing something here ?
If you need any other information, just ask me...Thanks RahulSharna .... i already sent a post to the liferay forum community ... but i didn't get any helpful response yet .... & i've to solve my problem as soon as possible.
Okay .... I found that i was having a problem in the deployment folder (Thanks yo you) ... & i fixed that.
To test things are okay i downloaded (1) of the liferay server portlets, installed it, then show it using (Add Content) and it worked perfect ..... So there's no problem with liferay itself.
Now i tried to download my own portlet war file just like the previous step .... when it started deploying it, it showed that exception in console & it didn't work :
114:27:34,968 INFO [com.liferay.portal.kernel.deploy.auto.AutoDeployDir] Processing DEPLOY_TO__Admin_Site_Portlet.war
214:27:34,984 INFO [com.liferay.portal.deploy.auto.PortletAutoDeployListener] Copying portlets for C:\Documents and Settings\Owner\liferay\deploy\DEPLOY_TO__Admin_Site_Po
3rtlet.war
4 Expanding: C:\Documents and Settings\Owner\liferay\deploy\DEPLOY_TO__Admin_Site_Portlet.war into C:\Programs\Java\liferay\temp\20071005142734984
5 Copying 1 file to C:\Programs\Java\liferay\temp\20071005142734984\WEB-INF
6 Copying 1053 files to C:\Programs\Java\liferay\bin\..\webapps\Admin_Site_Portlet
7Oct 5, 2007 2:28:18 PM org.apache.catalina.startup.HostConfig checkResources
8INFO: Undeploying context [/Admin_Site_Portlet]
9Oct 5, 2007 2:28:20 PM org.apache.catalina.core.StandardContext start
10SEVERE: Error listenerStart
11Oct 5, 2007 2:28:20 PM org.apache.catalina.core.StandardContext start
12SEVERE: Context [/Admin_Site_Portlet] startup failed due to previous errors
13Oct 5, 2007 2:28:20 PM com.icesoft.faces.util.event.servlet.ContextEventRepeater contextDestroyed
14INFO: Servlet Context Name: null, Server Info: Apache Tomcat/5.5.23
15 Copying 1 file to C:\Programs\Java\liferay\bin\..\webapps\Admin_Site_Portlet
16 Deleting directory C:\Programs\Java\liferay\temp\20071005142734984
17Oct 5, 2007 2:29:31 PM org.apache.catalina.startup.HostConfig checkResources
18INFO: Reloading context [/Admin_Site_Portlet]
19Oct 5, 2007 2:29:31 PM org.apache.catalina.core.StandardContext stop
20INFO: Container org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/Admin_Site_Portlet] has not been started
21Oct 5, 2007 2:29:31 PM org.apache.myfaces.config.FacesConfigurator feedStandardConfig
22INFO: Reading standard config org/apache/myfaces/resource/standard-faces-config.xml
23Oct 5, 2007 2:29:31 PM org.apache.myfaces.config.FacesConfigurator feedClassloaderConfigurations
24INFO: Reading config jar:file:/C:/Programs/Java/liferay/webapps/Admin_Site_Portlet/WEB-INF/lib/icefaces-comps.jar!/META-INF/faces-config.xml
25Oct 5, 2007 2:29:31 PM org.apache.myfaces.config.FacesConfigurator feedClassloaderConfigurations
26INFO: Reading config jar:file:/C:/Programs/Java/liferay/webapps/Admin_Site_Portlet/WEB-INF/lib/jsf-components-core-1.1-SNAPSHOT.jar!/META-INF/faces-config.xml
27Oct 5, 2007 2:29:31 PM org.apache.myfaces.config.FacesConfigurator feedClassloaderConfigurations
28INFO: Reading config jar:file:/C:/Programs/Java/liferay/webapps/Admin_Site_Portlet/WEB-INF/lib/just-ice.jar!/META-INF/faces-config.xml
29Oct 5, 2007 2:29:31 PM org.apache.myfaces.config.FacesConfigurator feedClassloaderConfigurations
30INFO: Reading config jar:file:/C:/Programs/Java/liferay/webapps/Admin_Site_Portlet/WEB-INF/lib/myfaces-all-1.1.1.jar!/META-INF/faces-config.xml
31.
32.
33.
34.
35.
36INFO: ServletContext 'C:\Programs\Java\liferay\webapps\Admin_Site_Portlet\' initialized.
3714:31:03,593 INFO [com.liferay.portal.deploy.hot.PluginPackageHotDeployListener] Reading plugin package for Admin_Site_Portlet
3814:31:03,734 INFO [com.liferay.portal.deploy.hot.PluginPackageHotDeployListener] Plugin package Admin_Site_Portlet/admin-site/1.0-SNAPSHOT/war registered successfully
3914:31:03,750 INFO [com.liferay.portal.deploy.hot.PortletHotDeployListener] Registering portlets for Admin_Site_Portlet
4014:31:08,703 ERROR [com.liferay.portal.kernel.deploy.hot.HotDeployUtil] com.liferay.portal.kernel.deploy.hot.HotDeployException: Error registering portlets for Admin_Site_Portlet
41com.liferay.portal.kernel.deploy.hot.HotDeployException: Error registering portlets for Admin_Site_Portlet
42 at com.liferay.portal.deploy.hot.PortletHotDeployListener.invokeDeploy(PortletHotDeployListener.java:371)
43 at com.liferay.portal.kernel.deploy.hot.HotDeployUtil._fireDeployEvent(HotDeployUtil.java:85)
44 at com.liferay.portal.kernel.deploy.hot.HotDeployUtil.fireDeployEvent(HotDeployUtil.java:42)
45 at com.liferay.portal.kernel.servlet.PortletContextListener.portalInit(PortletContextListener.java:45)
46 at com.liferay.portal.kernel.util.PortalInitableUtil.init(PortalInitableUtil.java:39)
47 at com.liferay.portal.kernel.servlet.PortletContextListener.contextInitialized(PortletContextListener.java:52)
48 at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3764)
49 at org.apache.catalina.core.StandardContext.start(StandardContext.java:4216)
50 at org.apache.catalina.startup.HostConfig.checkResources(HostConfig.java:1105)
51 at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1203)
52 at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:293)
53 at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
54 at org.apache.catalina.core.ContainerBase.backgroundProcess(ContainerBase.java:1306)
55 at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1570)
56 at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1579)
57 at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.java:1559)
58 at java.lang.Thread.run(Thread.java:595)
59Caused by: java.lang.ClassCastException: org.apache.myfaces.portlet.MyFacesGenericPortlet
60 at com.liferay.portal.deploy.hot.PortletHotDeployListener.invokeDeploy(PortletHotDeployListener.java:152)
61 ... 16 moreAny suggestions ? -
Bug: Custom AIR Application icons on Mac OS X don't display after install
There are circumstances where custom AIR application icons don't display in certain Finder views after installation.
This is apparent when viewing the application in a docked folder popup. The icon renders as a blank with a sort of no entry slash across it. Another example where this occurs is in a Downloads folder in the Dock (if you immediately create an alias to the app in the your Downloads folder, and your Downloads folder is in the Dock).
In addition, the maximum icon size of 128x128 really not that large. I wish AIR applications could have larger icons, like real applications.I've seen this occur with numerous applications (native OS X and AIR) and typically restarting the dock (rebooting or logout/login) fixes it for me. Doing a quick search on Google show's that it's a pretty common occurrence. Are you still seeing this occur after rebooting?
As for the large icon support, I would like to encourage you to vote for the following two feature requests!
Application Icon Size
512x512 Icon Support
Thanks,
Chris -
Disk icons or any other icons don't show on desktop.
After a power failure, disk icons or any other icons don't appear on desktop, and desktop doesn't respond to mouse clicks?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process (Finder.) The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful. -
Some options don't appear in MAX
I have an Agilent 86142A OSA connected via GPIB-USB-HS cable to my PC. MAX recognizes it in the tree, but a lot of options (like self-test, calibrate) don't appear. I'm new in MAX, so I'm not sure whether this is acceptable or not. Have I made some error in installing the device, or do some options simply not show up for particular devices? I've attached an image of MAX in this situation.
If indeed the device is installed fine, how does one perform a test to see if the connection is good if the Self-Test icons don't appear?
Please let me know if it seems the device has been detected properly and all is well.
Thanks!
Attachments:
MAXimage.JPG 98 KBEverything looks find. You are not supposed to have options for self-test or calibrate. Those would only be for NI's DAQ cards.
-
OSX Mountain Lion: Running app icons do not appear in the dock
It's almost 2-3 days that I have found when I run an application in OS X Mountain Lion, the application icon does not appear in the dock. In other words, the icons in the dock remain unchanged and no other running application icon appear in the dock. Does anyone else have the same issue?
I appreciate your time to answer my question.Since you're having issues in multiple accounts I suggest you repair the HD and re-install the OS. ML makes the process pretty painless.
Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First choose DIsk Utility and run Repair Disk. If you find errors run it until all errors are fixed or it reports "Disk cannot be repaired".
Then, choose Reinstall OS X. This will be an install in place and won't affect any of your own data. -
Comments don't appear in iWeb (3.01) application
Exactly as the subject says really.
Comments seems to be working OK on my published site (me.com account). Visitors can add comments, I can view and delete them online but they don't appear in the iWeb application.
The dock count increases when I have a new comment and blue dot appears in the entries list next the blog entry that has a comment. However, when I select an entry that definitely has a comment (online) I scroll to the end of the page (in iWeb) and nothing appears. The last part of the page just says is "Add a comment".
Anyone seen anything similar? Do you have a fix?
I would really like to be able to read the comment offline.
cheers
-darrellIf you click on the Entries page in iWeb the entries can be selected and each will have the commenst that were posted at the time iWeb was opened. I'm not sure what you have to do to refresh the comments if you've had iWeb open for a while. I opened and closed the site icon in iWeb and it refreshed the comments along with adding the number of new comments on the iWeb icon in the Dock.
OT -
Application Icons appear in Album application. Please provide folder management!!!
Application icons are appearing in the Album Gallery view. This makes it difficult to find pictures when application icons make up the majority of the pictures.
The .nomedia file method has been attempted which removes the picture from Folder view but the pictures still remain in the Gallery (Home) View.
The Album application would greatly benefit (as well as its users) from have a folder management function that allowed a folder to be manually ignored (or included) and for that setting to be instantly reflected in the Gallery View.
Re-installing the Album app to remove unwanted pictures every time another new application is added to the phone is not an acceptable solution.
Also as the Album application currently stands there is no explanation as to why the Folder list contains the list of folders that it does. There is no explanation of the mechanism for how Folders arrive on the folder list and why certain applications when installed create a new folder while other applications do not!
I.e: My folder list is full of folders I have no want of and some folders not even an understanding of.
Basic rule of programming is the AA principal if you cant make it Accurate make it Adjustable.
Also don't allow others vendors poor applications create problems for your own appliaction.You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
When I open my Excel/Word 2004, the 'Application Quit Unexpectedly' message appears and I cannot relaunch.
This just happened for Viber also.
I am not to knowledgeable on technical issues.
Please help!
Thank you.Thank you for your reply. Here is the full copy:
Process: Microsoft Excel [119]
Path: /Users/susanslater/Desktop/Microsoft Office 2004/Microsoft Excel
Identifier: com.microsoft.Excel
Version: 090512 (11.5.5)
Code Type: PPC (Translated)
Parent Process: launchd [63]
Date/Time: 2009-11-01 19:46:37.528 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: DE40358D-E5BE-46DF-8382-5E64FE348B72
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 translate 0xb80bcd58 0xb8000000 + 773464
1 translate 0xb80b7007 0xb8000000 + 749575
2 translate 0xb80d49c0 0xb8000000 + 870848
3 translate 0xb813ce79 spin_lock_wrapper + 1981
4 translate 0xb8011b64 0xb8000000 + 72548
Thread 1:
0 ??? 0x800bc286 0 + 2148254342
1 ??? 0x800c3a7c 0 + 2148285052
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed155 0 + 2148454741
4 ??? 0x800ed012 0 + 2148454418
Thread 2:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x812d8b96 0 + 2167245718
Thread 3:
0 translate 0xb8152b6b spin_lock_wrapper + 91311
1 translate 0xb817b608 CallPPCFunctionAtAddressInt + 137124
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spin_lock_wrapper + 4259
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 4:
0 translate 0xb8152c24 spin_lock_wrapper + 91496
1 translate 0xb817b31e CallPPCFunctionAtAddressInt + 136378
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813ce79 spin_lock_wrapper + 1981
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 5:
0 translate 0xb8152863 spin_lock_wrapper + 90535
1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813ce79 spin_lock_wrapper + 1981
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80bcd30 ecx: 0x00000000 edx: 0x0000001a
edi: 0x00000000 esi: 0x80303820 ebp: 0xb7fffa08 esp: 0xb7fff9d0
ss: 0x0000001f efl: 0x00010202 eip: 0xb80bcd58 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.03
Args: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMAp p /Users/susanslater/Desktop/Microsoft Office 2004/Microsoft Excel
Exception: EXC_BAD_ACCESS (0x0001)
Thread 0: (0xb011cd64, 0xb8152b6b)
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
0x005e0934: /Users/susanslater/Desktop/Microsoft Office 2004/Office/ShMem.bundle/Contents/MacOS/ShMem : _FWaitForConnection + 48
0x848dcbc4: No symbol
0x8483d558: No symbol
0x8483d73c: No symbol
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x945841d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x9459b7d8 ctr: 0x9459b7c4
r00: 0x00000194 r01: 0xf01019d0 r02: 0x00000000 r03: 0x00000013
r04: 0xf0101a68 r05: 0xf0101a60 r06: 0xf0101d40 r07: 0x00000004
r08: 0x00000000 r09: 0x100b2fd0 r10: 0x00000000 r11: 0x0064e110
r12: 0x9459b7c4 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0x00000000
r28: 0x00000000 r29: 0x009f8e00 r30: 0xf0101b28 r31: 0xf0101b28
Thread 1: (0xb009a83c, 0xb81529ef)
0x0082c800: No symbol
0x00644204: /Users/susanslater/Desktop/Microsoft Office 2004/Office/ShMem.bundle/Contents/MacOS/ShMem : _MerpUnregisterCFMFragment + 3156
0x945841d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x944fa120 ctr: 0x944f31f0
r00: 0xffffffe1 r01: 0xf0080d60 r02: 0x00000001 r03: 0xf0080e4c
r04: 0x00000102 r05: 0x00000000 r06: 0x00000054 r07: 0x00003403
r08: 0x000003e8 r09: 0x00000000 r10: 0x000eb010 r11: 0xa076a68c
r12: 0x944f31f0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0xf0080e4c r25: 0x00000054 r26: 0x00003403 r27: 0x000003e8
r28: 0x00000000 r29: 0x00000102 r30: 0x00000102 r31: 0x0064efb0
Thread 2: (0xb0220d64, 0xb8152863)
0x903cf818: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _MPWaitOnSemaphore + 40
0x8483dca8: No symbol
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x945841d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x903cf85c ctr: 0x944f3260
r00: 0xffffffda r01: 0xf0203d60 r02: 0x0013bda0 r03: 0x00007803
r04: 0x0000003c r05: 0x00000000 r06: 0x00000000 r07: 0xf0203c60
r08: 0x00000010 r09: 0x000f4240 r10: 0xffffff3f r11: 0xa076aa78
r12: 0x944f3260 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0x00000000
r28: 0x00000000 r29: 0x0000ea60 r30: 0x00000000 r31: 0x903cf7fc
Thread 3: Crashed (0xb7fff9d0, 0xb80bcd58)
0x85181738: No symbol
0x851816a0: No symbol
0x85181490: No symbol
0x847438d4: No symbol
0x92fadda0: /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation : _CFArrayApplyFunction + 352
0x8475675c: No symbol
0x84756810: No symbol
0x9577dc4c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1488
0x9577cde4: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 468
0x9577cc00: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTargetWithOptions + 56
0x95843b48: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : DockCallback(unsigned long, unsigned int, void*, void*) + 1648
0x9697250c: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _notifyDatagramHandler + 476
0x9693410c: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGSDispatchDatagramsFromStream + 740
0x969339a8: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _snarfEvents + 292
0x96c2cbd0: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGSGetNextEventRecordInternal + 152
0x969337e4: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGEventCreateNextEvent + 28
0x9577f408: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : PullEventsFromWindowServerOnConnection(unsigned int, unsigned char) + 88
0x957aa180: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _PullEventsFromWindowServer + 24
0x957aa0d0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _FlushSpecificEventsFromQueue + 72
0x83f6ac5c: No symbol
0x83f6ab90: No symbol
0x83f7a958: No symbol
0x83f79fe8: No symbol
0x83f79f60: No symbol
0x83f79d14: No symbol
0x903f08d4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _ReleaseClosure + 896
0x903f052c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _TerminateApplication + 88
0x94505acc: /usr/lib/libSystem.B.dylib : ___cxa_finalize + 240
0x945059a8: /usr/lib/libSystem.B.dylib : _exit + 36
0x924edab8: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices : _PlotIconRef + 0
0x84aab310: No symbol
0x84aab2e0: No symbol
0x8497c154: No symbol
0x8519a674: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x85181738 ctr: 0x94696df0
r00: 0x85181738 r01: 0xbfff9a30 r02: 0x00422000 r03: 0x0048e0e4
r04: 0x0db48ba0 r05: 0xfffffffe r06: 0x00000000 r07: 0x00000000
r08: 0x00000000 r09: 0x0db48cd6 r10: 0x00000001 r11: 0x00000048
r12: 0xa07a5b24 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0xa00523e8 r18: 0xa07659f0 r19: 0xa07659f0
r20: 0xa07a59f0 r21: 0xbfffa56c r22: 0xbfffa4b4 r23: 0xbfffa4ac
r24: 0x00000000 r25: 0xbfff9d58 r26: 0x00000000 r27: 0x00000003
r28: 0x000fd26c r29: 0x001aad30 r30: 0x004d2634 r31: 0x0048e0ec
Thread 4: (0xb019ed38, 0xb8152c24)
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
0x848dcd3c: No symbol
0x8483d96c: No symbol
0x8483db04: No symbol
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x903bb42c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x945841d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x005e0af0 ctr: 0x94583588
r00: 0x00000193 r01: 0xf0182c20 r02: 0x00000000 r03: 0x00000014
r04: 0xf0182d18 r05: 0x00000098 r06: 0x00000000 r07: 0x00000000
r08: 0x00000000 r09: 0x002c5340 r10: 0x000eb020 r11: 0x0064e124
r12: 0x94583588 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0x00000000
r28: 0x00000000 r29: 0xf0182d18 r30: 0xf0182d04 r31: 0xf0182d04
Regarding your suggestion to try the free LibreOffice, at the moment I don't need this, because I have downloaded a one-month trial Japanese Microsoft Office 2011 and can open my current files with that, although I do not want to revise any of my files until either this problem is solved, or I purchase a new MS Office.
Unfortunately there is not many MS Office software in English available here in Japan. I spoke to Microsoft Japan and even though they sell software, they do not sell any English verions of MS Office. Incredible, considering that the company itself is located in the US. They suggested I buy it from Amazon Japan, however Amazon do not have any available at this time and do not know if they will in the future.
Anyway, I have found a company which sells the downloaded English version (no disk). The software is Microsoft Office for Mac Home and Student 2011. I have not purchased it yet. It would take too long and the postage charges would be too high to purchase it from the US.
Hoping you have some good ideas.
Best regards,
Susan
Maybe you are looking for
-
Excel Reports - Preserve Template Format
Two part question here: Part 1: Is there an easy way to use the NI Report Generation Toolkit or any of the Excel subvis in the _Office addons subdirectory to preserve the existing formatting of a cell that you are writing data to? For example, I have
-
Page Setup options cached somewhere?
I'm trying to help someone in my office who can no longer select "Tabloid" size paper in the Page Setup. We have a Xerox Splash G640 which gives me about fifteen different page sizes in the Page Setup window, but even after deleting her printer from
-
Hi, I have ProBook 6450b, I have no sound from speakers, Everything in device manager is true
what can I do?
-
BW Performance & troubleshooting role
Dear SDN! I would like to know is it advisable for an rather inexperienced certified BW person to be deployed solo to a major customer who needs someone experienced to look into the cause of the BW performance and other problems experienced by users
-
I am working on tray selection for an invoice sapscript. It should print in Tray 2 and so I have set Resource Name in Sapscript form to TRY02. It works in one client and not in another client. Does anyone have an idea why this could be?