Application messages are in the system log instead of the application log

Hi SAP GURUS.
The standard output is created from the outbound delivery .
All the messages are hitting the system log instead of the application log .
This is after the upgrade from 4.6c to ECC 6.0 .
Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

verzunof wrote:
Hello,
My system.log is filled with these messages, they repeat every second.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
Do these messages indicate a problem? If so what that could be problem and the solution?
Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
Thanks a lot.
verzunof wrote:
I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
"The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
Handling system resets from various commands.
Controlling the fans."
Carolyn

Similar Messages

All of a sudden my outlook inbox messages are all scrambled by date instead of being sorted by most recent at the top...how do i sort them by most recent at top (which is suppose to be default)

all of a sudden my outlook inbox messages are all scrambled by date instead of being sorted by most recent at the top...how do i sort them by most recent at top (which is suppose to be default)

As far as I can tell, there is no way to reverse the sort.

The system cannot connect to the Application Server

Hello Everybody,
I have a problem when connecting to my BPC Application.
I get the following error when trying to open BPC:
"The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the application server is unavailable at this time."
We have to reboot the application server to have acces again to the application.
The osoft website was also unavailable.
The server diagnosotic was OK.
And when consulting the tblLogs table I found this message:
==============[System Error Tracing]==============
[System Name] : ApplicationService [Message Type] : ErrorMessage [Job Name]     : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query() [DateTime]     : 1/3/2011 4:27:35 PM [UserId]       : GROUPE\Deshors [Exception]       DetailMsg : {System.NullReferenceException: Object variable or With block variable not set.     at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)     at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)     at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser()     at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
==============[System Error Tracing End ]==============
==============[System Error Tracing]==============
    [System Name] : Configuration [Message Type] : ErrorMessage [Job Name]     : ServerDefault.GetValue [DateTime]     : 1/3/2011 4:40:08 PM [UserId]       :   [Exception]       DetailMsg : {System.Exception: Cannot create ActiveX component.     at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)     at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)}
==============[System Error Tracing End ]==============
Any help?
Thank you in advance.

Hi expert,
Unfortunately, we still encounter the issue !!
We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
Here is the Windows event warning message we get :
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/31/2011 11:43:11 AM
Event time (UTC): 1/31/2011 10:43:11 AM
Event ID: 0295c38777734029a3cec37ec035fa45
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
    Trust level: Full
    Application Virtual Path: /OSoft
    Application Path: C:\PC_MS\Websrvr\Web\
    *Machine name: **************
Process information:
    Process ID: 4323
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: Exception
    Exception message: Invalid UserID
Request information:
    Request URL: http://localhost/Osoft/Launch.aspx
    Request path: /Osoft/Launch.aspx
    User host address: ::1
    User:*******\Administrator
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 12
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
   at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks in advance for your help
Lionel

Keep getting the 'system has run out of application memory' window, what to do?

I'm running a mid 2010 MacBook with 2.4 Ghz Intel Core 2 Duo processor and OS X 10.9.5. Every time I'm on Safari I get the 'System has run out of application memory' window and it asks you to quit out of programs you're not using. The problem is sometimes the only things running are Safari and Finder. It'll then freeze up programs and prevent web pages from loading or showing up. I'm not quite sure what this means or how to go about fixing it. Any help would be much appreciated.

Hi Meghan,
If you are seeing that alert that you are running out of application memory then I would take a look at using Activity Monitor to see how the memory is being used. If it looks normal usage to you, then you may want to upgrade the memory on your Mac. Take a look at the article below for more information.
OS X Mavericks: If your Mac runs slowly
https://support.apple.com/kb/PH13895
How to use Activity Monitor
https://support.apple.com/en-us/HT201464
Take it easy,
-Norm G.

How can I disable the system feature which automatically restarts applications i had open during a previous session ?

How can I disable the system feature which automatically restarts applications i had open during a previous session ?

When you log out, uncheck the box to reopen applications. If you're still using 10.7.3, then you will have to uncheck the back with each shutdown or restart.
10.7.4 update was suppose to fix it that when you uncheck the box, it should remain unchecked for restarts after that.
For the resume features, check this link:
http://reviews.cnet.com/8301-13727_7-20083707-263/managing-mac-os-x-lions-applic ation-resume-feature/?tag=mncol;title

The system could not calculate the fiscal year start or finish date message

While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers

In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickn

In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickname) the problem is that now I see the sender identity in messages as a nick name while in the incoming calls I see the first name ( this problem appeared only in ios7
Please help

check in settings > mail contacts calendars, and in the contacts area you should be able to change how the names are viewed
dante

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

I have many thousands of songs in my itunes library. Unfortunately, most are now pointing toward .jpgs instead of the m4a files in my itunes library. Is there anyway to fix this without reimporting all the files into itunes from scratch??

I have many thousands of songs in my itunes library. Unfortunately, most are now pointing toward .jpgs instead of the m4a files in my itunes library. Is there anyway to fix this without reimporting all the files into itunes from scratch?

OMG...I'm glad to know I'm not the only one. Since my computer is a goner, I don't have any other way to access all that music.

Whenever I send a text from my iphone 5 my text messages are appearing on other apple devices in the household.

Whenever I send a text from my iphone 5 my text messages are appearing on other apple devices in the household. ie Iphone 4 and Ipod.
How do I stop this occurring.

You'll have to deselect your phone number on the other devices in Settings/Messages/Receive at/
Check this post about iMessage:
iMessage on iPad and iPhone Explained and De-Mystified

TS3899 My incoming emails on my ipad are going into the important box instead of the inbox how do I get them to go into inbox

The incoming mail on my apple ipad are going straight into the important box instead of the inbox how do I resolve this.

Who is your email provider? Is it Gmail? Take a look at this.
https://productforums.google.com/forum/#!topic/gmail/JVnvlvaVt0E

An error has occurred in the system DV1CLNT400 while copying the document

Hi All,
While creating complaint confirmation i am getting below mentioned Errors in ECC.
Can any body provide configuration settings.
An error has occurred in the system DV1CLNT400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
Error occurred during determination of profitability segment (Notification W IAOM 025)
Error occurred during creation of settlement rule (Notification I IAOM 046)
Regards,
Teja

Hi,
From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
Hope this will help.
Thanks,
Samantak.

The system cannot connect to the server

Hi Experts,
when I set BPC for Excel connection by connection wizard, I can connect to server and get application set list, but when I login application set, the system show me the message("The system cannot connect to the server"), and log off! how can I fix this problem? is it a firewall issue?
best regards
evans

Hi,
Can you compare your macro setting (Security level )compare to the system in which BPC is working. Or try as follows:
1. Unistall BPC
2. Restart system
3.Install BPC
hope it works...
regards,
Raju

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

First time going to a site where I do not have access and clicking the back button I'm returned to the root site instead of the site I started from

Greetings,
I have SharePoint 2013 enterprise using ADFS for authentication. I have an issue where the first time going to a site where you do not have access and clicking the back button you're returned to the root site instead of the site you
started from.
ie:
1) at site http://www.sharepoint.com/sites/finance/home.aspx
2) browse to
http://www.sharepoint.com/sites/finance/private/home.aspx
3) receive a message: you do not have access to this site ((oops went to the wrong location - I'll hit the back button))
4) click the browser back button
5) get returned to http://www.sharepoint.com/pages/home.aspx
This only happens the first time browsing to a site that I do not have rights to, after this I can browse to the same site and hit the browser back button and return to the correct site, or any other site that I do not have access to.
Any ideas as to why this happens? Ideas of where to start looking?
Thanks

Hi Robert,
From your description, when you receive access denied message and hit back button in browser, it redirects you to the root site but not previous site. However, this just happens at the first time.
You may try to use some tool or check log which can tell us how does it handle the request when you hit the button. And compare the issue time and non-issue time.
I'd suggest you use Netmon tool:
http://blogs.msdn.com/b/carloshm/archive/2012/11/08/sharepoint-2013-network-monitor-parsers.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Application messages are in the system log instead of the application log

Similar Messages

Maybe you are looking for