Application object BUPA: Table TSADC does not exist
Hi All,
When I try to create a Business Partner in transaction fmcac1, I get the message Application object BUPA: Table TSADC does not exist, especially when I try to go back to the Address tab after clicking on any other tab on that screen. I have tried to add the table in trans BUSG but I don't know what I am supposed to assign as the FM, for example.
I have also used the trans BUSB to try to delete the entry for TSADC but it says 'do not make any changes (SAP Entry.)' Can u pliz assist with the information I have requsted above or prescribe another solution.
Thanx in advance.
For the benefit of others, I was able to solve the problem by removing the entry to the RIGHT, not the WHOLE entry (which refuses becoz it's an SAP entry). This is through transaction BUSB.
Similar Messages
-
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
OTEXBAS add on installation error: table ZAUTHCUST does not exist
HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request : SAPK-301COINOTEXBAS
System : SPS
tp path : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===Mamta:
I am not sure why you post these in the SAP for Utilities space. this is for the Utilities industry. I will move this one to ILM.
regards,
bill. -
Add on OTEXBAS installation error: table zauthcust does not exist
HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request : SAPK-301COINOTEXBAS
System : SPS
tp path : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===Hi Mamta,
Refer to Troubleshooting section of below SAP note
1143352 - SAP Archiving/Document Access by Open Text Installation
Hope this helps.
Regards,
Deepak Kori -
ORA-04043: object SYS.DELTA$SESSION does not exist
Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil AlshaibaniSQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM -
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Table DSWP_BPM_DMD_S_NOTIFCUST does not exist
Hi ,
When I use Solman 4.0 SPAM/SAINT to install the new ST-SER 700 2007 1, it came the error during phase DDIC_ACTIVATION, and I checked the log, it is like :
Table DSWP_BPM_DMD_S_NOTIFCUST does not exist.
please help me.Generally, SYS's objects are not exported even with a FULL export.I was thinking that it may have had something to do with this but when I tried to create it as system then I tried to add it to the profile and it said that the function did not exist then. Then I created it as sys and it did find it (although not when doing an export). Would this have been because the password_verify_function has to be created by the sys user (pretty much every site I read about setting up a password_verify_function says to create it as the sys user) ? Or does it just have to be created in the system tablespace (my system user's default tablespace was 'users' at the time when I tried creating the function)?
-
For object RF_BELEG number range does not exist
Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me outTry Extending the same in VN01 , and assigning it to your relevant document
Cheers -
Table TTZDF does not exist on database
HI forum
i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
Review the log in the work directory (dev_w0) the follow message is generated.
A Sat Jun 12 21:19:56 2010
A **GENER Trace switched off ***
B dbmyclu : info : my major identification is 3231713892, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
C
C Sat Jun 12 21:20:15 2010
C *** ERROR => prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR => prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:26 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:28 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:30 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:31 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:18 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:21 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:29 2010
C *** ERROR => prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
M ***LOG R47=> ThResFree, delete (001024) .
I search notes and in sdn forum any information about this error, but there isn´t information.
How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
Hi forums
cheking the process of the installation, the problem i wait have it solve doing the reinstallation with any adjust in the database release .. i will be comment the process to the solution.
Jairothie process was solved with a new installation-
-
Table Z does not exist in the database
Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Licecache table missing Table MATRIXINDE does not exist in the database wit
Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in thisHello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
source & target systems.
What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
877203 Post steps after the Homogenous liveCache copy usi u2026
886103 System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina -
Object Category CL_ABAP Class does not exist
Hi Experts,
When Iam creating a workflow tasks or template the object category CL_ABAP Class does not exist in drop down box. Only BOR Business object is appearing. Could anyone help me the problem and how to resolve it.Jose,
Note: If you are in a 6.20 system and can't see the Object Category choice "ABAP Class", then you first need to execute report SWF_CATID to enable "ABAP Classes" as an available object category. It's already done for you in releases 6.40 and higher.
I am guessing you are in SAP_BASIS 620 version.
Courtesy:
This is from blog written by jocelyn dart of ABAP OO Workflow.
For more details pls check this:
/people/jocelyn.dart/blog/2006/12/19/using-functional-methods-in-workflows-and-tasks
Hope this will help.
Cheers
Jai
PS: Small correction report name is RSWF_CATID not SWF_CATID -
LOG BZA= table PATCHHIST does not exist on database
Dear Friends,
I am installing SAP R/3 4.7 using import method and in the last step of the installation RFC logon module (post procesing) getting the error FRF-00063 RFC logon failed with invalid interface.
below is the R3trans log
4 ETW000 Connected to DBMS = DB6 --- DB2DBDFT = 'TST' --- SYSTEM = 'SPP'.
4 ETW000 [dev trc ,00000] { db_rtab( fcode = 'RT_INSERT', tname = 'PATCHHIST' ) {saprel.c:1350}
4 ETW000 163 0.755328
4 ETW000 [dev trc ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] CON = 0 (BEGIN)
4 ETW000 1743 0.757071
4 ETW000 [dev trc ,00000] &+ DbSlModifyDB6( SQLExtendedPrepare ): [IBM][CLI Driver][DB2/AIX64] SQL0204N "SAPTST.PATC
HHIST" is an undefined nam
4 ETW000 32 0.757103
4 ETW000 [dev trc ,00000] &+ e. SQLSTATE=42704
4 ETW000 19 0.757122
4 ETW000 [dev trc ,00000] &+
4 ETW000 19 0.757141
4 ETW000 [dev trc ,00000] &+ INSERT INTO "PATCHHIST" ( "EXECUTABLE", "SAPRELEASE", "HOSTNAME", "PLATFORM", "DBVENDOR"
, "TIMESTAMP", "PATCHNO",
4 ETW000 20 0.757161
4 ETW000 [dev trc ,00000] &+ "DBSLPATCHN" ) VALUES( ?, ?, ?, ?, ?, ?, ?, ? )
4 ETW000 29 0.757190
4 ETW000 [dev trc ,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=1, op_type=15, re
opt=0
4 ETW000 33 0.757223
4 ETW000 [dev trc ,00000] &+ ABAP location info: '', 0
4 ETW000 30 0.757253
4 ETW000 [dev trc ,00000] &+
4 ETW000 19 0.757272
4 ETW000 [dev trc ,00000] &+
4 ETW000 19 0.757291
4 ETW000 [dev trc ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] (END)
4 ETW000 28 0.757319
4 ETW000 [dbtrtab ,03967] ***LOG BZA=>table PATCHHIST does not exist on database [dbtrtab#5 @ 3967]
4 ETW000 38 0.757357
Kindly help me in resolving the issue.
Thanks and Regards,
SeshuHello Seshu,
the table should be there, so maybe there was an earlier problem durint the installation.
Go to the directory containing the installation logs and search for errors, e.g.
grep -i PATCHHIST *.log
Regards,
Mark -
PLSQL - Creating a cursor for a table that does not exist
I am writing my first PLSQL program, and I have run into a problem creating a cursor.
I have a cursor that accesses a table on another database via a database link. The database link does not yet exist, so the first thing that my PLSQL does is create the database link. The problem is that I have to define my cursor before I have executed the code for the database link, and the compiler gives me an error for referring to a table that does not yet exist. How can I get around this?
Here is the basic structure of my program
DECLARE
--cursor defined here
BEGIN
--code creates database link if it does not yet exist
--code executes cursor
ENDI'm still not sure I understand why the database link can't be created in advance... Once you run your code once, the database link is going to exist permanently. Why not just create it at compile time like every other object in your application?
It's sort of like trying to create a table at runtime-- if you do that, you can't refer to that table in static SQL later on. You can do everything with dynamic SQL, but that's going to substantially increase the complexity of your code.
Additionally, you have to have the CREATE DATABASE LINK privilege granted directly to the user running your code, not through a role, which seems like a huge security hole.
Justin -
Hi,
I have created a table as like below to hold pictures on the
database.
SQL> create table img_store
(iname varchar2(20), picture BLOB);
Using Oracle Portal-> Application-> create new 'FORM' based on
table, an "Upload Image Form" was created as a portlet.
The form allow to browse images which you want to upload into
database, but when i click on 'Insert' button after browsed the
image to store the image path to the column, an error message
displayed:
Error: Path ID does not exist. (WWC-50001)
Anyone can advice to me on this? Thanks.
Regards,
Sherlynhi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian
Maybe you are looking for
-
How to share an Adobe Organizer collection?
We have a library of standard pdf pages that we need to combine from time to time in different ways and then output as a single pdf document for email or print. This library is constantly being updated. I am using Adobe Acrobat 9 Pro and have been us
-
I went to preferences > updater > unchecked automatic updates. So Manually or automatically I can't install 10.1
-
How to automate the deletion of existing request
Hi , I want to delete the existing old requests under Cube . How to automate this process . Please can anybody help me .
-
Hello, I'm having two problems with audio clips: 1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip. 2. When I drag an audio clip from the browser
-
Trouble with error message on desktop manager
Hi, I am having some trouble with an error message I am getting when I try to sync my 8530 Curve with MS Outlook 2010. It was working just fine and now I am receiving the error message "error code- 0x80043ade. Check documentation" Any advice? Than