Application Server Control inaccessable suddenly

with error
HTTP 404 - File not found
was working perfectly with no changes.
http://<servername>:7777 still brings up SOA Suite 10.1.3.3.0 just fine.
http://<servername>:7777/em brings the above error.
any ideas?

If you are using IE, can you turn off the "show friendly error messages" option and then try it. IE masks server provided error messages behind the vague "page cannot be displayed" error page.
Post any errors it shows in the page back here.
Then can you two additional things:
1. Execute "$ORACLE_HOME/opmn/bin/opmnctl status -l" and post the contents here.
2. Execute "$ORACLE_HOME/opmn/bin/opmnctl status -app -l" and post the contents here.
-steve-

Similar Messages

How can I create a new OC4J Instance in Application Server Control

Hi All,
Is there any way to create a new OC4J Instance in Application Server Control of installed SOA Suite, so that it gets listed in Cluster Topology page.
Thanks
Krrish

Hi Eric,
Thanks for the reply.
it is pretty simple..which I didnt try earlier..
Thanks
Krrish

Problems in starting up Application Server Control from SOA Suite

I have an issue starting up the Application Server Control page from the SOA Suite (10.1.3.1.0) welcome page. I can open all other control pages by entering the oc4jadmin/<password> where <password> is the password specified at the time of installing (Standard Install) the SOA suite.
Application Server Control accepts the oc4jadmin/<password>, but shows another page to "Supply Administration Credentials". The following error message is shown on the page.
+++++++++
This OC4J is configured to make JMX connections via RMIS and fall back to RMI if the RMIS port is not configured. The RMIS connection on the OC4J instance home on Application Server shara.SHARA_HP is configured but a connection could not be established. The JMX protocol is specified by the oracle.oc4j.jmx.internal.connection.protocol property in opmn.xml
You are logged in as oc4jadmin.
Enter the credentials for a cluster-wide user in the oc4j-administrators group. These credentials are needed by Application Server Control to make remote connections.
* User Name
* Password
[Store Credentials} button
++++++++
Has any one encountered this? Any clues where to look for things? Initially I had the problem with all the controls due to my computer name as it has an underscore ie., SHARA_HP. I had to use localhost to overcome this ie., http://localhost:8888/em
Any help/clue would be appreciated.
Thanks
Maha

At install time there is a question that asked if you would like to configure adminstration now. (Something like that). By default this is not checked. If you did not check it you cannot access enterprise manager.
The is probably a way to configure it, but it might be faster reinstalling.
There is a simple way to de install by going to the ORACLE_HOME/bin and run the deinstall script.
cheers
James

Configuring Library Path in Application Server Control

Hello Everyone,
I am using :
1. HP UX B.11.23 64 bit OS
2. Application server 10.1.3.1
3. 64-bit JVM (JRE 1.5.0_03)
I am facing a problem with the connection pools in 10g EM Application Server Control. Initially the connection pool used JDBC thin client. I was asked to implement OCI client instead(Performance enhancement). So, in the existing connection pool only i changed the URL to jdbc.oracle.oci@FCC where FCC is the SID. After this when i went to test connection it says '$ORACLE_HOME/lib/libocijdbc10.so' is not a valid module. Bad magic number.
After some searching n analysis i found out that instead of picking up from $ORACLE_HOME/lib it should pick from $ORACLE_HOME/lib32 as the ORACLE version is 32-BIT. But i dont know how to configure the same using ASC. I had set LD_LIBRARY_PATH and SHLIB_PATH in HP-UX box as well but it didnt help.
Please suggest or let me know if you need any other information.

Hi,
Where did you set the parameters LD_LIBRARY_PATH and SHLIB_PATH?
Regards,
Soumyajit

Oracle application server control white screen problem

Hi,
I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
same machine.
I am able to login to application server control from http://riysvdwh-004:7777, but
unable to login to the application server control from http://riysvdwh-004:7778,
i can login to portal and discoverer from the second link, but when i click on"log on to
Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
pipe symbols moving at the top left of the screen and i dont get the next screen.
I have checked the setupinfo.txt file in midtierhome/install location and found out that
the hostname in the database connection string is different, instead of hostname riysvdwh-004
, it is riysverp-004,
Use only SSL connections with this Oracle Internet Directory:No
Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
Use the following URL to access the Oracle HTTP Server and the Welcome Page:
http://riysvdwh-004:7778
i think this could be a reason why i am unable to login from port 7778.
Is there a way to make this work.
would appreciate some suggestions.
regards,

1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

Problem in starting Application Server control

Hi,
I have installed Oracle BI. But when Iam trying to configure the discoverer catalog, I could not able to connect to the Application server control. Please advice with which login credentails I need to login to the Application server control.
Thanks
venkat

To connect to the App Server control, you need to login with the id ias_admin. The password is whatever you specified during the installation process. The port number to use would have been displayed at the end of the installation process.
Help on how to configure the Discoverer catalog is available in Ch 6: "Configuring the Discoverer Catalog and Discoverer Plus OLAP", of the Oracle® Business Intelligence Discoverer Configuration Guide, 10g Release 2 (10.1.2.0.0), Part No. B13918-02, available at http://download-uk.oracle.com/docs/cd/B14099_09/bi.1012/b13918/disco_catalog_config.htm#CJAHAHGH
Thanks
Abhinav

HTTP_server link does not show in Application server control...

Hi, I'm trying to configurate OAS 10g and HTTP Server, when start OAS all the proccess start up, including HTTP Server, but then when try to configurate HTTP_server in Application server control I can't access it, because this component has no 'link' below its name ... why? I can see HTTP_server is up, but can not access it!
help

Hi Pratap, Sumit,
I did do the steps afresh now but still teh issue persists,
1) Download the complete classes/oracle/apps/per folder to my local desktop myclasses/oracle/apps/per in Binary mode.
2) In Jdeveloper i created a new OAF Workspace and Project and mentioned the default package as oracle.apps.per
3) In myprojects/oracle/apps/per/selfservice/hierarchy/server i copied only the XML files (VO,View Link) from the server in Binary mode and the PG.xml from the database using the export batch program.
4) Close and open Jdeveloper and you can see the PG.xml in webui folder and only the view object xml files in server folder. View Links do not show up eventhough they are available in the folder. Even the server.xml file which is available in the folder does not show up in Application Navigator.
Please let me know if i have missed any step which you had mentioned.
Thanks, Suresh

Unable to get 10g application server control page

Need Urget help
hi
Operating system windows 2003 with sp1
Application server 10g-- v 10.1.2.0.2
I have installed both 10g application server infrastructure and middle tire sucessfully on the machine with all the components sucessfully installed without any component failure or error.
i can access welcome page on
http://localhost:7777 or
http://hostname.domainname:7777
sucessfully but when i try to login to application server control from welcome page
it directs me to http://hostname.domainname:18100 but doesnot display any page
no error just blank page with status done at status bar.
-- but i can access server control page using
http://hostname.domainname:18100/emd/console
login sucessfully after entering username and paswword
but why i can not access it just by specifiying
http://hostname.domainname:18100 also when i try to start or stop any components no response after pressing stop/start/restart button available.
-- same problem with
http://localhost:7778/forms/frmservlet no button shows any response or any error on configuration or on any other components web page.
i checked all almost every thing
all services or running sucessfully
plz i need ur help.

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Unable to open application server control page

Hi,
i have a problem to open application server control page in client machine.
below is the error gets while opening the page;
ERROR:
'An error was encountered while loading page. There was a communication problem contacting the agent. This may be a transient network problem. There was a communication problem fetching monitoring data. This may be a transient network problem'
Please help me to sort out this.
Thank you,
Naresh.

See this thread: Uanble to open the App server console after installing the Oracle soa suite
Hi,
Are you sure you have configured a EM? Did you select "Configure this as an Administration OC4J instance" during the installation?
Regards,
Martin
Regards,
Martin

No 'Connection' link in Application Server Control

Hi,
Using Application server control(OEM 10g) to create public/private connection so that the discoverer viewer will be able to us this connection to connect to multidimensional data source(OLAP).
As a discoverer administrator When i browse... discoverer > administration>.. i can see only 'services logging' link but no 'connection' link to create a link.
An help is greatly appreciated.
Thanks
SA

Resolved the issue.
There are 2 types of installation.
1. BI standalone installation (i.e. installed from an Oracle Business Intelligence standalone CD with no associated OracleAS infrastructure)
2. BI associated installation (i.e. installed from an Oracle Business Intelligence standalone CD and associated with an OracleAS infrastructure)
with the first installation the connection link is not available.
You can associate a Discoverer instance with an existing OracleAS Infrastructure during the post-install process.
Thanks

Memory utilization presented in Application Server Control

Hi
I have Oracle Application Server 10g R3 Patch Set 5 application server, which work in cluster. On mian page in Oracle Application Server Control I have memory column, where I can see information about memory utilization. I wonder about this information. For example, I have heap size set for 2 GB and application uses 300MB, but I have on main page Application Server Control 900 MB memory utilization for OC4J container. Why is so difference between use heap space memory (only 300 MB), and this information 900 MB? But sometimes, memory in Server Control rises to 2 GB, but application uses 300 MB heap space still. Why does occur this situation (much difference between uses heap space and memory presented on Server Control)?
Thanks awfully for help.
Regards
Edited by: Luk004 on 2012-01-16 03:30

> Central Instance : 1.2GB is physical memory is free out of 12GB.
> App1 Instance: 400MB is physical memory is free out of 10GB.
> App2 Instance: 2GB is physical memory is free out of 14GB.
>
> Right now, no background for dialog process are running in any of the three instances but still ocuupy lot of physical memory.
>
> Questions: How to calculate memory in ECC and where could be the rest of memory defined in system? No process is running and all memory seem to be consumed.
Memory is allocated
- by the operating system itself
- by the database (SGA_TARGET)
- by the application server buffers (ST02 et al)
- by the operating system as filesystem cache (if you e. g. use VxFS you may configure the memory consumption)
To see where the memory is being used, use OS tools like 'glance' or 'top'.
Markus

WS not created in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

WS not found in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

Problem in Disabling Application Server Control Console on APPHOST2-4

I am doing the ESB setup in a highly available environment
According to the deploymet guide i have to disable the Application server control on the secondary server.
For this it is given to change the default-web-site.xml file for the application server.
Can someone tell me the location of this file?
Regards,
Message was edited by:
Nilay

Hi Nilay,
It's in the following directory: [oracle home]/j2ee/[oc4j container for which the control must be diasbled]/config/default-web-site.xml
You can change the load-on-startup attribute of the ascontrol application in it, e.g.
<web-app application="ascontrol" name="ascontrol" load-on-startup="false" root="/em" />
Regards, Ronald

Error accessing Application Server Control Console

I just downloaded oc4j_extended_101330.zip and installed it at
/u01/app/oracle/oracle/product/10.2.0/oc4j
I then ran the following commands:
export ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/oc4j
export J2EE_HOME=$ORACLE_HOME/j2ee/home
export JAVA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1/jdk
export PATH=$JAVA_HOME/bin:$PATH
java -version
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
cd $J2EE_HOME
java -jar jazn.jar -activateadmin <password>
cd bin
./oc4j -start
Once the server was up and running I went to http://localhost:8888 and saw the ocj4 home page. Then I tried to access the Application Server Control Console at http://localhost:8888/em and received an internal server error 500. The logs reported this exception:
08/02/20 13:38:59.807 ascontrol: Error initializing servlet
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at java.awt.Font.initializeFont(Font.java:308)
at java.awt.Font.<init>(Font.java:344)
at oracle.sysman.ias.studio.app.StudioConsole.loadFont(StudioConsole.java:292)
at oracle.sysman.ias.studio.app.StudioConsole.init(StudioConsole.java:107)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4824)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4748)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2971)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:741)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:534)
I believe I've followed the installation and startup directions correctly. Any thoughts on what I might have done wrong?
Thanks

Hi,
It works with jdk 1.5 corect. With java 1.4.2 try to run oc4j using this command:
OC4J_JVM_ARGS=-Djava.awt.headless=true ./oc4j -start
Regards,
Tomas

Application Server Control inaccessable suddenly

Similar Messages

Maybe you are looking for