Application working fine with Emulator Not in N95

Hi all,
I am creating a video based application for N95 which enable
running video(.3gp) in normal to rotate(90 degree) and display in
full mode so i tried it with Adobe Device Central's Emulator and it
is working fine (Note: Emulator was update on 24th sept and adobe
has released update on 22nd sept)
but in actual device it is not working fine (means rotation
is now happening) also i have updated N95's firmware from 21.0.016
to 30.0.015. my N95 has flash lite 3.0 standalone player too but
problem is same, kindly look at this..
Device : N95 with 1GB
Firmware : 30.0.015
Flash Lite Player: 3.0
OS: Symbian 9.2
thanks
Maneesh Panwar

Hi all,
I am creating a video based application for N95 which enable
running video(.3gp) in normal to rotate(90 degree) and display in
full mode so i tried it with Adobe Device Central's Emulator and it
is working fine (Note: Emulator was update on 24th sept and adobe
has released update on 22nd sept)
but in actual device it is not working fine (means rotation
is now happening) also i have updated N95's firmware from 21.0.016
to 30.0.015. my N95 has flash lite 3.0 standalone player too but
problem is same, kindly look at this..
Device : N95 with 1GB
Firmware : 30.0.015
Flash Lite Player: 3.0
OS: Symbian 9.2
thanks
Maneesh Panwar

Similar Messages

  • Installed application works fine for administrators, not for users - LV7.1.1

    Hi,
    Someone must have posted this before, but I can't find it anywhere after much searching of the knowlege base and user forums. Feel free to point me in the right direction...
    I have an application that loads and plays a wav file, and applies a filter while playing it back. The user may select the filter being used from the control panel. Filtering is done in1/8 second chunks, so changes in the filter appear instantanious.
    I'm using LabView 7.1.1  (i.e. 7.1 with the 7.1.1 maintainence release applied). Filters have been created with the Digital Filter Design tool in the Signal Processing toolset.
    I have created an installer using the application builder in LabVIEW. The runtime engine is included in the installation, as are the filter files.
    Once installed on a target machine the application works fine for anyone logged on with administrator rights/privileges. For anyone with user or guest privileges the filter either doesn't re-load or isn't applied to the wav file regardless of the user's efforts on the control panel.
    The audio file is however loading and playing back.
    This problem is seen on W2k, WinXP Pro SP1 and Win XP Pro SP2. I can't comment on other O/S, that's all I have available to test on. 
    This is tricky to debug, as in the installed application you can't view or step through the source code.
     Your ideas and observations much appreciated.
    Bandit

    You're right Sacha, it takes almost no time to rate an answer. Only 4* for you, as the info is interesting and relevant, but in this instance I wanted to stick with read only access. These filter files are an integral part of my application, and I certainly don't want users changing them .
    A little further investigation has provided the ideal fix for my needs. Burrowing down into the Read DFD coefficients.vi provided in the signal processing toolset I found the files are opened for read & write. The mode isn't actually wired, so read & write is selected as it's the default. As Windows only allows read access in this location to those with user privileges the files won't open. 
    I now have a modified version of Read DFD coefficients.vi that has the files opened for read only (this has to be done in 2 places).  I have tested this on Win2k and XP SP2, and it works exactly as I require. This is different to the user in your other thread Sacha, as they specifically want everyone to be able to write to their files.  
    Perhaps it's a question for the LV developers - should the Read DFD coefficients.vi be changed to only give read access? (assuming it hasn't been changed already in V8). I'm in no place to assess the impact on other users. As the .vi is only a read function, which opens the file, reads the coefficients and closes the file again I can't see how it would be a problem though - the write access isn't required.
    Thanks to all for their help on this. Problem solved, and I'm a happy bunny .  (Thinks - what about some bunny smilies on the forum?)
    Bandit

  • Email working fine with WiFi, not so much with 3G

    Recently I have been having an issue where I will leave my house (and WiFi) with my iPhone, heading out and about, wondering why it's been such a quiet day and I haven't received any email, then I get home and WHAM, it all gets downloaded at once.  If I turn off WiFi, I see all sorts of errors like "can't connect", "connecting" ad infinitum with the "hourglass" in process icon going round and round, etc., etc.  Rebooting, exiting Mail then going back in, and other tricks of the trade sometimes work, mostly not these days. 
    The error is sporadic, there is no rhyme or reason, although I secretly wonder if AT&T cell phone coverage near my home has actually gotten worse?  Is that possible?
    I have multiple email accounts and types set up on my iPhone - POP with Earthlink and Gmail; Exchange for work.  They are ALL affected today, sometimes it's only Exchange, it's never ONLY POP, that I have noticed.
    Issue affects both sending and receiving.
    Again, everything works fine under WiFi.  Today, nothing is working when I turn off WiFi and rely solely on 3G.
    Any suggestions?

    Not sure if this is the right forum for your question.  There is a Flash Player question.
    But since you're here and have posted I will firstly ask, is the browser viewing size set to 100% in all of your browsers?  They should display about the same if they are the latest modern browsers unless you have accidentally hit "Ctrl+" with the keyboard combination.

  • Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

  • How to register a PDF Viewer application to work fine with IE

    (Working on Windows 7 Pro x64 / IE 8)
    I've developped my own PDF minimalist reader application (to run on kiosk PCs) and I cannot make it work fine with IE. Every time i try to follow a pdf file link in a web page, IE ask me if I want to open or to save the file. working on kiosk PCs, i don't
    want the final users to be able to click "Save" in order to prevent them from browsing drives !
    When using Adobe Reader on the PC, clicking a pdf link results in the file opened automatically in Adobe Reader.
    Here is what I've added to the registry :
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.pdf]
    @="PCLSPDFViewer.Document"
    "Content Type"="application/pdf"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.pdf\OpenWithProgids]
    "PCLSPDFViewer"=""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.pdf\OpenWithList]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.pdf\OpenWithList\pclsPDFViewer.exe]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer\shell]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer\shell\open]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer\shell\open\command]
    @="C:\\pcls\\pclspdfviewer.exe \"%1\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer.Document]
    @="Ducment PCLS PDFViewer"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer.Document\shell]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer.Document\shell\open]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\PCLSPDFViewer.Document\shell\open\command]
    @="C:\\pcls\\pclspdfviewer.exe \"%1\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\MIME\Database\Content Type\application/pdf]
    "Extension"=".pdf"ege
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\pclsPDFViewer.exe]
    @="C:\\pcls\\pclspdfviewer.exe"
    What did I missed ?

    Hi
    Chris RENAUD 768,
    First of all the PDF files should be set to be read by the application you developed by default.
    To set the default program:
    Control panel \Programs \Default Programs \Associate a file or protocol with a program
    In IE8 There used to be a key called HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000-C000-000000000046}  which stored the File Types that could either
    Auto-Open or not. We can create a .bat file to automatically add a value here to achieve the goal.
    The code is as following:
    @ECHO OFF
    reg query HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000-C000-000000000046}
    if "%ERRORLEVEL%" EQU "1" (
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000-C000-000000000046}" /f /v "PDF.File" /t REG_NONE
    Note: Please Back up the registry before you modified the registry and delete the key  {0002DF01-0000-0000-C000-000000000046} if it has existed in the registry before you ran the .bat file.
    Best regards

  • With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

    With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

    From the fcp.co forum. See if this does anything for you.
    simon_hutchings
    OFFLINE
    Junior Boarder
    Posts: 24
    Thank you received: 5
    Karma: 1
    I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
    1. Open the application Audio Midi Setup (located in Applications : Utilities)
    2. Select the Output Tab for the current output device
    3. Select the Configure Speakers option
    4. Select the Multichannel tab
    5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. 

  • Gargoyle https router logon not working after version 27, when I try and logon it just says the connection was reset. works fine with 27.0.1 must be a bug

    I use a Gargoyle quota management router which has web access through https. It works fine with Firefox version 27.0.1 , and has worked for years with no problems. Somewhere after version 27.0.1 a bug was introduced which prooduces the error message "Problem loading page, The connection was reset, The connection to the server was reset while the page was loading" each time I go to the routers address. Reverting to 27.0.1 fixes the problem and it also works fine with Interney Explorer so it is not a firewall problem.

    HI techman88,
    Thank you for your question. I understand that the password for your router is no longer working in Firefox 27. Please download the new version of Firefox from your working browser and reset the profile.
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u>
    To reset Firefox go to about:support and and click Reset Firefox. However if there is a saved password in this profile you can manage the passwords under Options > Security> Passwords. Please check this out as well.

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • We had migrated our servers from a domain to cloud. all the web applications working fine locally, but from outside they are accessible but on editing giving 404 with some request id.

    hi all,
    recently we migrated our moss 2007 from a domain to cloud env. everything goes well and all the application working fine locally.
    but when users are trying from outside first they get promt for basic auth, that is enabled, its fine. then servers serve first page smoothly. all the application browsing is fine. but when authorized users are trying to edit a web page and they click on
    anything(save, submit for publication, publish) they get 404 with a request ID. another thing if they add a new page to app and then make any changes to that page then they are not getting any issue.
    please help if any one resolved that kind of issue.
    thanks in advance.
    SJ

    Hi Sumanpreet,
    Thanks for posting your issue, Kindly check out below mentioned URLs to get the fix for this issue
    http://www.sharepointdiary.com/2011/02/404-page-not-found-error-sharepoint-2010-migration.html#ixzz2jHyVIFcX
    http://vasya10.wordpress.com/category/sharepoint-2010/sharepoint-2007-to-2010-migration/
    https://social.technet.microsoft.com/Forums/en-US/d80e7495-e889-4209-9a0a-82a852c944b1/after-migration-from-moss-2007-to-sharepoint-2010-i-tried-to-check-the-site-with-site-url-getting?forum=sharepointadmin
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • HT1296 Is there any way I can transfer the music from my ipod touch to my computer without having to pay for it? Itunes worked fine with my ipod on my old laptop. I am not willing to risk losing all of the music on my ipod to update to the newest iOS.

    I really don't want to lose all of the music I have on my ipod touch. It worked fine with my ipod and my old laptop but I got a new laptop and now it doesn't want to sync anything except purchases I made on the ipod and everything that was in the cloud. The rest of the music on my ipod is from old CDs and I am away from home. I would greatly appreciate it if someone could give me some advice. I also don't really want to pay for a download that moves the music into itunes so if anything is free and safe that would be great or if there is a way to do it manually. Again thanks to anyone who has advice to share.

    You would have to purchase a 3rd party program ( not supported by Apple).
    The ipod is not a storage/backup device.
    Copy everything from the old computer or your backup copy of your old computer.

  • My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

    My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

    Sign her out and sign yourself in!

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    Have you changed the system voice to an English one in system preferences?

Maybe you are looking for

  • ERROR in content NATing

    Good day! There is scheme uplink uplink | | CSS1------CSS2 | | |--Server--| Server is directly connect by two interfaces to CSSes in hot reserv mode (active one interface only). CSSes is configured in active-standby mode.To each other they connected

  • Nokia Lumia 920 Romania Vodafone Black Update

    Hi, i have a problem . I can't Update my firmware but i can update it to GDR 3 .My phone say that it is already up to date.my Firmware version is 3047.0000.1326.2005 but in Nokia official website say that Nokia Black is available for my phone.My OS v

  • How does one edit the basic features of a template?

    The standard templates differ in various fundamental aspects which don't know how to edit. The background colour of a page, for example, or where the page number goes. (I'm aware that one can edit the background colour of characters or sections. But

  • Migrating from Windows Photoshop Elements to iPhoto '08

    I recently got a Mac and I'm looking into migrating from Windows Photoshop Elements 6.0 to iPhoto 7 ('08). I've seached this forum, but I didn't find any detailed tips, tricks and recommendations on how to do the migration. I know about the PE (Photo

  • ColorSync and color profile stuck in sepia tone!

    This is a detailed post explaining my problem and everything I've tried. Please help me! My 1-year-old likes to jam on the keyboard of my iMac G4 (he's a regular mac lover, he is), and as such sometimes messes things up. I never thought he could do a