Applre Remote Desktop and Active Directory

Hi
How does one remote desktop into a Mac that in bound to Microsofts Active Directory ?
It will not accept any username/password if bound, but if unbound it connects first go.
Suggestions ?

Have you looked into extending the Active Directory schema to support Mac OS X? Given the problems I'm having with AD Mobile Accounts, I don't even want to think about modifying the AD schema yet; and I doubt I'd get approval in the best of circumstances. But it may be useful for what you're trying to do.
See "Best Practices: Integrating Mac OS X with Active Directory" (April 2007) at
http://images.apple.com/itpro/pdf/ADBest_Practices2.0.pdf
{quote}Extend the AD schema to handle management.
By adding 38 attributes and 10 classes to the AD schema, your AD system can support all Mac OS X management policies. Just use the normal Mac OS X management tools and target the AD domain.{quote}
Message was edited by: Robert Racansky
Message was edited by: Robert Racansky

Similar Messages

Only Remote-Desktop and Replication with 0.0 Reduction

Hi guys,
I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
( All Traffic 53% of Reduction).
I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
using too RDP with crypto/compacted.
But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
I'm using all the Default Classifiers in Replication Application
Double-Take                            LZ+TFO+DRE       1100, 1105
EMC-Celerra-Replicator            LZ+TFO+DRE       8888
MS-AD-Replication1                 LZ+TFO+DRE       UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
ms-content-repl-srv                   TFO                     507, 560
MS-FRS1                                LZ+TFO+DRE       UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
netapp-snapmirror                    LZ+TFO+DRE       10565-10569
pcsync-http                             LZ+TFO+DRE       8444
pcsync-https                           TFO                      8443
rrac                                        TFO                      5678
Rsync                                     LZ+TFO+DRE       873
Thanks a Lot
My Best Regards,
Andre Lomonaco

As you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

Looking for successful auth debug between cisco 1113 acs 4.2 and Active Directory

Hello,
Does anyone have a successful authentication debug using cisco 1113 acs 4.2 and Active Directory? I'm not having success in setting this up and would like to see what a successful authentication debug looks. Below is my current situation:
Oct 6 13:52:23: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:23: TPLUS: processing authentication start request id 444
Oct 6 13:52:23: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:23: TPLUS: Using server 110.34.5.143
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 26 (0x1A)
Oct 6 13:52:23: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:23: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:23: T+: user:
Oct 6 13:52:23: T+: port: tty515
Oct 6 13:52:23: T+: rem_addr: 10.10.10.10
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:23: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
Oct 6 13:52:23: T+: msg: Username:
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:23: TPLUS: Received authen response status GET_USER (7)
Oct 6 13:52:30: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:30: TPLUS: processing authentication continue request id 444
Oct 6 13:52:30: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 15 (0xF)
Oct 6 13:52:30: T+: AUTHEN/CONT msg_len:10 (0xA), data_len:0 (0x0) flags:0x0
Oct 6 13:52:30: T+: User msg: <elided>
Oct 6 13:52:30: T+: User data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE: wrote entire 27 bytes request
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:30: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
Oct 6 13:52:30: T+: msg: Password:
Oct 6 13:52:30: T+: data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:30: TPLUS: Received authen response status GET_PASSWORD (8)
Oct 6 13:52:37: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:37: TPLUS: processing authentication continue request id 444
Oct 6 13:52:37: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:37: T+: AUTHEN/CONT msg_len:11 (0xB), data_len:0 (0x0) flags:0x0
Oct 6 13:52:37: T+: User msg: <elided>
Oct 6 13:52:37: T+: User data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE: wrote entire 28 bytes request
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 33bytes data)
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 45 bytes response
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 33 (0x21)
Oct 6 13:52:37: T+: AUTHEN/REPLY status:7 flags:0x0 msg_len:27, data_len:0
Oct 6 13:52:37: T+: msg: Error during authentication
Oct 6 13:52:37: T+: data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:37: TPLUS: Received Authen status error
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: timed out
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: No sock_ctx found while handling request timeout
Oct 6 13:52:37: TPLUS: Choosing next server 101.34.5.143
Oct 6 13:52:37: TPLUS(000001BC)/1/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:37: TPLUS(000001BC)/46130160: releasing old socket 0
Oct 6 13:52:37: TPLUS(000001BC)/1/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:49: TPLUS: processing authentication start request id 444
Oct 6 13:52:49: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:49: TPLUS: Using server 172.24.5.143
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 26 (0x1A)
Oct 6 13:52:49: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:49: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:49: T+: user:
Oct 6 13:52:49: T+: port: tty515
Oct 6 13:52:49: T+: rem_addr: 10.10.10.10
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 43bytes data)
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 55 bytes response
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 43 (0x2B)
Oct 6 13:52:49: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
Oct 6 13:52:49: T+: msg: 0x0A User Access Verification 0x0A 0x0A Username:
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Received authen response status GET_USER (7)
The 1113 acs failed reports shows:
External DB is not operational
thanks,
james

Hi James,
We get External DB is not operational. Could you confirm if under External Databases > Unknown User Policy, and verify you have the AD/ Windows database at the top?
this error means the external server might not correctly configured on ACS external database section.
Another point is to make sure we have remote agent installed on supported windows server.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289013
Also provide the Auth logs from the server running remote agent, e.g.:-
AUTH 10/25/2007 15:21:31 I 0376 1276 External DB [NTAuthenDLL.dll]:
Attempting Windows authentication for user v-michal
AUTH 10/25/2007 15:21:31 E 0376 1276 External DB [NTAuthenDLL.dll]: Windows
authentication FAILED (error 1783L)
thanks,
Vinay

Apple Remote Desktop and controlling over VPN

Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
Thanks

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

Remote Desktop and Snow Leopard Server

What is the best way to use Remote Desktop with Snow Leopard Server?
I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
The mac mini server will basically be nothing but a server.
I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

Remote desktop and apache

remote desktop and apache.
There are times I feel that someone is looking over my shoulder, and changing my settings and controlling me.
I would like to at least be able to communicate with them so I can ltarn. I also want to be able to monitor and have some say so as to what they are doing to my computer.
Thank you

Thanx for your reply.
I should have stated that this is my personal computer and if any one should be the administrator I would think it would be me.

I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L

Apple Remote Desktop and WildBlue Excede

I am trying, without luck, to get Remote Desktop to work with WildBlue Excede. Can port forwarding be established with their Surfbeam2 Satellite Modem? If so, what are the port numbers, and how is it done?
Has anyone had success in setting up Apple Remote Desktop and WildBlue?
WildBlue Technical Support said they do not provide static IP addresses, so it couldn't be done. Something tells me that is not true.
Has anyone had any luck with WildBlue?
Many thanks

Hi Paul,
Are you trying to connect to a computer that's connect to the internet with wildblue excede? or are you trying to connect to a computer some where else while your connect to the internet with wildeblue excede?
Ether way, have you considered an altertive solution? For instance LogMeIn?

Remote Desktop and Airport

Dear All,
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I cannot access this IP address via Remote Desktop. Any Ideas?
Harry

Harry Ringwood wrote:
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I suppose you mean you're trying to connect to your Mac from outside your LAN. The address you see in the Network panel of System Preferences is a LAN address. To make what you want to do work, (1) from the remote computer you're going to have to specify the WAN address of the AirPort Extreme and (2) configure the AirPort Extreme (via port mapping) to pass the Remote Desktop signals to your iMac. To see the port mapping settings, in AirPort Utility look at the Advanced panel.

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

Sun java directory server and Active Directory

We are using two different directory servers Sun java directory server and active directory.
My question is how we can have password synchronization between these two directory servers.
I have checked Sun Java[TM] System Identity Synchronization for Windows 1 2004Q3
http://www.sun.com/download/products.xml?id=41537425
It seems that it's supported platforms is only for solaris and windows , but I have installed my Sun java directory server on linux and obviously it doesn't work for me.
I would be grateful if anyone can suggest a solution to work around this situation.
I have checked identity manager , I would like to know that if I can do this using this product.
http://www.sun.com/software/products/identity_mgr/specs.jsp
--regards.
Sara

Yes RHEL 4 is a supported OS with DSEE 6.0.
Identity Synchronization for Windows is a part of DSEE that allows synchronization of users, passwords and groups between Sun Directory Server and Active Directory bi-directionally without altering the users environments, ie it does not require that users change their current habits.
Identity Manager is a complete identity management solution that is targetting enterprise work flow when it comes to user provisioning and de-provisioning, but also allows to build authentication and password change forms that will provision the passwords to many different systems including Sun Directory Server and Active Directory but also IBM mainframes, legacy applications, databases...
If you are implementing a complete identity management solution, then go with Identity Manager. If you need a lightweight and fast solution for just synchronizing users and passwords between Sun DS and MS AD, Identity Synchronization for Windows should be your choice.
Regards,
Ludovic.

### How to make integration between UCCX and Active Directory##

Hello,
I want to know what is the right procedure to perform a right integration between the UCCX and the Active Directory?
Waiting Yours Reply,,,,
Thanks a lot......

What version?
Assuming a current version (5.0 and higher): there is NO direct integration between CCX and Active Directory. The CCX server must not be joined to a domain.
CCX uses UC Manager End Users for synchronized usernames and passwords. If UC Manager is synchronized with an LDAP source, such as Active Directory, then this will carry forward to CCX. CCX would pass authentication requests to CCX through AXL. UCM would perform the LDAP authentication and inform CCX of the success/failure.

Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

Hello!
Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

Yes, it is possible.
Check this how-to if you have any doubts about the process.
http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
http://www.markholloway.com/blog/?p=1189

Difference between Windows NT domain registry and Active Directory registry

What are the difference(s) ?

Frank, thanks for your response :)
I want WebSphere Application Server to take advantage of a directory service. There are multiple options available for a directory service.
In my configuration the requirement is to make WebSphere Application server to use Microsoft's Active Directory.
While I was going through (WebSphere) documentation, I see following note.
" With Windows NT domain registry support for Windows 2000 and 2003 domain
controllers, WebSphere Application Server only supports Global groups that are the Security type. It is recommended that you use the Active Directory registry support rather than a Windows NT domain registry if you use Windows 2000 and 2003 domain controllers
because the Active Directory supports all group scopes and types. The Active Directory also supports a nested group that is not support by Windows NT domain registry. The Active Directory is a centralized control registry."
You can find the above note in this link (somewhere after 7th line)
http://www-01.ibm.com/support/knowledgecenter/SSAW57_7.0.0/com.ibm.websphere.nd.multiplatform.doc/info/ae/ae/csec_localos.html?cp=SSAW57_7.0.0%2F3-11-5-1-0-0
Does it mean that they are recommending to use Active Directory over Windows NT (which is an older approach) with windows server 2000 or windows server 2003 because Active directory is
advanced ?
I was under the impression that, Active Directory was started with Microsoft Windows Server 2003 and Windows NT registry was used till Windows 2000 server.
After going through above links,
Windows NT registry in an old method. However, it is compatible with Windows Server 2000 and Windows server 2003 but it is recommended to use Active directory with Windows Serve 2003 as it is more advanced. And the same is recommended in WebSphere documentation
(I am aware that support for Windows Server 2000 is over and only extended support is available for Windows Server 2003 however this is to clear doubt). Is my understanding correct ? And does windows server 2000 also support both i.e we can use either Windows
NT registry or Active directory and similarly, Either of them (Windows NT or Active Directory) could be used with Windows Server 2003 ?
And if I got it correct, Is Windows NT and Active Directory, both directory service offering from Microsoft? While NT being an old method and Active Directory being a new/advanced approach ?

Step by step process to create domain name and active directory in windows 7 64 bit

Step by step process to create domain and active directory in windows 7 64 bit
I work in an organization
I want to create a domain name SBBYDP and make it server for other computers
I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
And this may be in Active directory option.
I installed windows 7 professional edition 64 bit
Can any person help me? Step by step process, I always thanks full all of you

Hi,
You must use the Windows Server platform system for the AD service, you can refer the following KB first:
Active Directory
http://technet.microsoft.com/en-us/library/bb742424.aspx
AD DS Deployment Guide
http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Applre Remote Desktop and Active Directory

Similar Messages

Maybe you are looking for