Apply check on transfered data?

Hi
I have following scenario:-
Data file -contains Header,Detail,trailer
Control file- contains the number of detail record in data file.
Now i have to develop the interface that will transfer from file to table.
The problem is, after i transfer the records from detail file to db, I have to read control file and cross check whether the total count transfered is same as the count in control file.
How do i have such check in ODI???I am not getting the approach towards solving it.
Please suggest ....
Thanks...

hi..
there is api called getodi_previous step(insert count) log...check for exact syntext .
in a variable you can use this and use this variable just after interface. then this will give u no of record inserted in the target table by the previous interface ..then you can compare this value with your control file.
regards
Manish

Similar Messages

Phone is connecting and transfering data in the ba...

Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr. Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute?
I did try to find what could cause this, but no success. What is going on, any ideas for what to check?
I finally deleted my 3G access point in menu->settings->settings->connection->destinations->internet
This did stopp the phone from connecting and transfering data.
Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!?
What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.

Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help.
So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers.
Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam?

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

How do you stop 'Transferring Data from...' in toolbar on first page of a website - eventually stops but takes a minute then loases some images on a site when complete - other browsers are fine.

Only happens on index page of website - Firefox repeatedly says 'connecting to site/transfering data from site in the status bar for about a minute before finally 'done', then some images on the index page are missing. All other browsers are fine - how do you turn off this problem in Firefox - there is nothing to download on the index page, already displayed but can't continue unless you jump to another page in the site. Searched web and many references to this but no definate answer. Code is same on all pages of site, just the index page which hangs.

You can check for recently installed suspicious or unknown extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can I exit from paintComponent? ...or... how can I check for invalid data?

I'm writing a calendar applet for a programming class and I've nearly completed it but I'm stuck at checking for valid data.
What seems to be happening is that paintComponent() is being called before actionPerformed.
In actionPerformed (when they click the button), it checks to make sure they entered a valid month (1 to 12). If the didn't it dispalys a message, but if they did it calls repaint().
But even if repaint() isn't called, Java still seems to call it before actionPerformed and I get exceptions.
So I tried checking inside of paintComponent() by using a simple if(...) return; but that doesn't seem to do anything... it just keeps going through with the method.
So -- Once the user presses my button I want to make sure the data is valid before repainting the screen. How can I do this?

I validate it in actionPerformed which is called by
the action listener... that is what you meant right?
The problem is that it seems paintComponent() is being
called before I can validate the data with
actionPerformed(). I need to stop paintComponent()
from always being calledMVC. (Model, View, Controller)
Initially the internal value of the data (the model) should be valid (or null with a check in the paintComponent method)
paintComponent (the view part) shows the state of the valid data.
You press the button.
actionPerformed is called (the controller).
It checks the value and, if valid, writes it to the data (model), then updates the view.
At no point will the view have to render invalid data, because the model is only updated after actionPerformed checks the value.
The pattern may be applied with different classes performing the three roles, or different methods in the same class (sometimes it's easier that way for simple cases).
Pete

Transferring data from external hard drive to new replacement Macbook Pro...

Hello,
Apple have arranged to give me a replacement Macbook Pro due to faults with hardware on the one I am currently using. I will be going to pick up the replacement Macbook Pro tomorrow morning.
As a complete novice I just wanted to check that I have backed up the data from my current laptop onto my Iomega external hard drive properly, as I am slightly nervous about losing all my work and not being able to transfer all my files onto my new Macbook Pro tomorrow.
I did a back up using time machine earlier today which took quite a long time and seemed to go successfully. Is this the right thing to have done to save all data from my current laptop onto the external hard drive?
Will transferring data from the external hard drive onto my new Macbook Pro be a simple task?
Will I have to reinstall all my software such as Logic and Pro Tools? Also will my preferences and settings for music software be changed?
I'd greatly appreciate any advice.
Thanks,
Deena

Well it's like this.
If your problem on the Mac didn't affect the software or the TimeMachine backup, then restoring from that using SetupAssistant (when you first set up a new Mac it will ask you to restore) should go fine.
HOWEVER, if there are software issues on the Mac that also transferred to the TimeMachine drive, that will only transfer them back onto your new computer.
You can't very easily just pick out the things you want to restore from TimeMachine with, it doesn't give that fine detail of control, and if it's really messed up, it might not restore anything at all.
The golden rule of backups is to maintain two separate and easily accessible hardware copies of your data off the machine at all times.
Since you don't know for sure if the TimeMachine restore is going to work as intended, and your only other source is going to disappear, I'd advise a additional backup of your Music, Documents, Pictures and Movie folders etc., to another regular external drive via regular drag and drop copy methods.
The operating system and programs can all be reinstalled from fresh sources on the new machine, provided you have the AppleID and password, license codes for your programs, email passwords and any other necessary information to re-establish the license on the new machine.
(In some cases licensed software HAS NOT transferred to a new machine with a TimeMachine restore and had to be reinstalled)
Some times you have to contact the developer or "uninstall" the licensed program so it sends a signal to their servers that the program has been removed, else your license code may not work on the new machine.
You might decide the new machine would be better off with a fresh install of your programs that you know are 100% compatible with Lion etc., leaving a lot of older stuff you installed over the years off the new machine, if you restore from TimeMachine, you don't have this option. You pretty much get all the crap along for the ride,
If your new machine gets all crapped up, then restoring Lion is going to going to be a tough challenge, as you need a strong reliable Internet connection to download a fresh copy of Lion from Apple servers (no more disks). Once you do that, then somehow you have to use third party software ($$) to cherry pick your files out of TimeMachines trap. More headaches than you anticpated, and likely a charge by a specialist.
So I'd advise another hard drive with a copy of just your files, just in case a crap-up occurs
You can restore Lion yourself if it craps up, install programs from fresh sources as you know how to do, use the old license codes and then return your files manually exactly back into their same Music, Pictures, Documents, and Movies (etc, not Library) folders as before.
The key to this manual method is to make sure to use the same user name as before, so all your file location data pathnames retained by program files like iTunes to where the songs are located on the drive, are matched. Once you open these programs and restablish the links in OS X, then you can move them around.
Some tricks, if you use iPhoto, you can right click "show package contents" and inside is a folder with your Originals, copy that out and you can reimport your pictures into the new iPhoto Library on the new machine.
So use TM if you dare, but prepared to do things manually is my opinion.
TM restores have not been all that reliable or dependable, the more messed up your machine is, the worst the restore seems to be.
Good Luck

Transfering Data from SQL Server 2 Oracle

Hellow All,
Even the subject is not here, but i'm trying to transfere data from SQL Server to Oracle 8 (8.0.6) .. using the Wizard that ships with MS SQL Server. All Connections (ODBC or OLE DB) are alright, but still have problems in moving Data .. and Failure.
Failure in Data Movement and not in Table structures.
I have tried using most of the Valid and consistent ODBC and OLE Providers from Microsoft & From Oracle... but still have problems.
Even The Oracle Migration Assitiant from Access 97 dose not work properly.
Any commenets please ???
Regards
Tariq
null

Anil,
OMWB has an inbuilt collision manager, that will check for conflicting words and aptly replaces them with an alternative word.
OMWB also allows users to change these words once you finish performing capture. In this particular case, when you capture the view with the name 'rule', you can go to the oracle model in omwb and change the name to "rule1" or anything that is desirable, preferably those words that do not conflict with the oracle d/b's reserved words.
Regards,
Srinivas

Transfering data from ztable across the r/3 systems by using change pointer

hi all,
what we have to do at the field of domain level when we are transfering data from custom table across the r/3 systems by using change pointers.

Hi Deepak,
Check this blog.. it gives a very good explanation on extraction of data through function modules...
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope it helps..
Regards
Manick
Message was edited by:
Manickavasagan M

How can I hide "Read/Waiting/Transferring data..." status?

Firefox 34.0.5 on Windows 7
I want to hide the "Read/Waiting/Transferring data..." status that shows on the lower left of the browser screen
I found a solution in this archived thread, https://support.mozilla.org/en-US/questions/942499, and I applied it, but it doesn't seem to work

That should be statuspanel (tag name) instead of #statusbar-display for the selector
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
statuspanel[label^="Looking"] {display:none !important;}
statuspanel[label^="Connect"] {display:none !important;}
statuspanel[label^="Waiting"] {display:none !important;}
statuspanel[label^="Transfer"] {display:none !important;}
</nowiki></pre>
You can possibly use these selectors to be more precise:
<pre><nowiki>statuspanel[type="overLink"] .statuspanel-label
statuspanel[type="status"] .statuspanel-label[value^="Looking"]
statuspanel[type="status"] .statuspanel-label[value^="Connect"]
statuspanel[type="status"] .statuspanel-label[value^="Waiting"]
statuspanel[type="status"] .statuspanel-label[value^="Transfer"]
</nowiki></pre>
*[[/questions/969955]] Disable status bar without add-on

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Do Not Check Uniqueness of Data in Write Optimised DSO

Hello,
I am working with write optimised DSO with already billion records in it. I have flag 'Do Not Check Uniqueness of Data' in Settings as checked(means it will surely not check for uniqueness of data). I am thinking of removing this flag off and activate the DSO again. I am willing to remove this flag as it will provide option of Req ID input in listcube on DSO and without this list cube will never return back with results.(I have to analyze aggregations)
I tried removing this flag and then activate DSO in production system with 17 million records which took 5 mins for activation (index creation). So maths says for a billion records activation transport will take around 6 hrs for moving to Production.
I am willing to remove this flag as it will provide option of Req ID input in listcube and without this list cube will never return back with results.
Questions:
How does this flag checks the uniqueness of record? WIll it check Active table or from the Index?
To what extent DTP will slow down the process of subsequent data load?
Any other factors/risks/precautions to be taken?
Let me know if questions are not clea or further inputs are required from my side.
Thanks.
Agasti

Hi,
Please go through the site :
/people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
As far as your ques are concerned... i hope above blog will answer most of it , and if it does'nt please read below mentioned thread.
Use of setting "Do Not Check Uniqueness of Data" for Write Optimized DSO
Regards
Raj

How do I check for null date entires using custom JScript on a SharePoint NewForm.aspx?

Hi,
I have the below JScript:
/*Function to convert the US Date format to UK date format */
function parseDate(input) {
var parts = input.split('/');
// new Date(year, month [, date [, hours[, minutes[, seconds[, ms]]]]])
return new Date(parts[2], parts[1]-1, parts[0]); // months are 0-based
/*Function to check if end date is before the start date */
function checkDates(){
var sd = parseDate($("input[title='From']").val());
var ed = parseDate($("input[title='Until']").val());
if(sd > ed) {
alert("Please check From and Until Date");
$("input[value$='Save']").attr('disabled', true); //hide save button
else
$("input[value$='Save']").attr('disabled', false); //show save button
The above works fine for checking sd > ed but I can't seem to check for null's, I have attempted the below which doesn't work:
/*Function to convert the US Date format to UK date format */
function parseDate(input) {
var parts = input.split('/');
// new Date(year, month [, date [, hours[, minutes[, seconds[, ms]]]]])
return new Date(parts[2], parts[1]-1, parts[0]); // months are 0-based
/*Function to check if end date is before the start date */
function checkDates(){
var sd = parseDate($("input[title='From']").val());
var ed = parseDate($("input[title='Until']").val());
if( (sd > ed) || (sd == null) || (ed == Null) ) {
alert("Please check From and Until Date");
$("input[value$='Save']").attr('disabled', true); //hide save button
else
$("input[value$='Save']").attr('disabled', false); //show save button
Any help appreciated.

Hi aspnet-scotland,
Please post ASP.NET related questions in
ASP.NET forums where you could receive better responses.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Check boxes in Data grid

Hi,
I have check boxes in data grid, using action script how do i get the values of check boxes that were selected ?
Can anybody guide me here.
<mx:DataGrid id="targetBaseAdd" width="100%" height="100%" dataProvider="
{Application.application.ccModel.initializeBusinessUnitData.initializeBusinessUnit.baseArra y}">
<mx:columns>
<mx:DataGridColumn headerText="" width="20">
<mx:itemRenderer>
<mx:Component>
<mx:HBox width="100%">
<mx:CheckBox horizontalCenter="0"/> </mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Base" labelFunction="baseTargetList"/>
</mx:columns>
</mx:DataGrid>
Thank You,
Anu.
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Base" labelFunction="baseTargetList"/>
</mx:columns>
</mx:DataGrid>
Thank You,
Anu.

refer following examples:
http://blog.flexmonkeypatches.com/2007/11/06/datagrid-checkbox-itemeditor/
http://www.experts-exchange.com/Web_Development/Web_Languages-Standards/Flex/Q_23237167.ht ml

Is there a way of transferring data (music, movies etc) from an external hard drive directly to an iPad Mini?

Hi Guys,
Is there a way of transferring data (music, movies etc) from an external harddrive directly to an iPad Mini?
The reason I ask, is I'm going travelling and don't want to take my macbook with me - but I have a lot of music, movies etc that I want to take.
Is this possible?
Thanks, Fintan

Thanks all.
I've just come across Hyper Drive Cloud FTP - which allows you to connect any external harddrive or USB stick via WiFi.
Looks like a pretty good option.
I've also read that you can use GoodReader app to download files from harddrive to iPad.
Good review on Wired - http://www.wired.com/reviews/2012/07/cloudftp/
Product site - http://www.hypershop.com/iUSBport-by-HyperDrive-formerly-CloudFTP-s/218.htm
Let me know what you think?!

Fatal error while transferring data from one bb to another

I was trying to transfer data from one bb to a different bb using the bb desktop manager tool. It collected all the data from the first bb fine and then while transferring data to the new one it said a fatal error occured to try again. That bb will not even turn on now. No white screen or anything. Its like there is no operating system. I don't know what to do. I tried to connect it and just update the software but that isnt working either. Says it is not responding during initialization! I think I killed it.... any ideas what to do???

You can try to reload the OS in one of the following ways
http://www.blackberry.com/btsc/KB03485
http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Apply check on transfered data?

Similar Messages

Maybe you are looking for