Apply MacBook display settings to external monitor

Hi. The display on MacBooks and other Macs is beautiful, and I wish I can bring those display and color settings to my external monitor, because no matter how much I calibrate using the one under system preferences or adjust the setting directly on the monitor itself, it does look as nice as it does on my MacBook Air to which the display is connected. I can see all the figues in System Preferences -> Displays -> Color tab -> Open Profile, of both MacBook Air and the external monitor, but is there a way I can manually change those figures of the external monitor so that they are same as those of MacBook Air?
Thanks.

Yeah, I've changed the Display Profile of my HDTV (connected as a monitor).
If you go into System Preferences > Displays then click Gather Displays and click on the Color Tab for your monitor, deselect "Show profiles for this display only." You should be able to chose the same Display Profile for you monitor as your Mac.

Similar Messages

  • Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?

    Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?

    you cant return it unless you have had it for 14 days or less, but you can bring it to an Apple store or AASP for warranty service.

  • Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
    An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
    Any thoughts or help would be appreciated!

  • Problems connecting my MacBook Pro to an external monitor

    For the past 2 years, I have regularly connected my MacBook Pro to an external monitor (Dell SR2320L) using a VGA cable. When I do so, the picture  automatically comes up in the maximum resolution of the external monitor (1920 x 1080). However, just in the past few weeks, the picture on my external monitor automatically comes up in 1600 x 1200 instead.  When I click on the display menu in the upper right corner of my screen, there isn't even an option for 1920 x 1080 anymore.  I've tried restarting my computer and even unplugging and replugging in the cable, but nothing seems to fix the problem. However, on at least some occasions, the problem seems to fix itself after about a day or so of use, and the picture reverts back to 1920 x 1080. I should note a couple of things: when I connect another MacBook to my monitor, the display automatically comes up in 1920 x 1080. And when I connect my Macbook to a different display, I have the same problem as I have with my display. So I think the issue is definitely with my computer, not my monitor. Does anyone have a suggestion about how to solve this problem? Or, when the problem arises, is there anything I can do to reset the display to 1920 x 1080 other than waiting for the problem to fix itself? Any suggestions woudl be greatly appreciated!

    Hi bonfig,
    If you are having issues with the external display settings on your MacBook Pro, it may be worth going throught the following article, in particular the portion about resetting the SMC and PRAM:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    - Brenden

  • MacBook Air w/ 4 External Monitors

    I have a MacBook Air with 4 External Monitors:
    Dell UltraSharp 30"
    2 x Dell UltraSharp 20" - Rotated 90 degrees
    Samsung Sync Master Commercial Display 55" Mounted on the Wall
    This is the main monitor setup w/o the Samsung:
    http://www.digitaltigers.com/ultraflex-powertrio30.asp
    The 30" is connect to the air using a MiniDP to DP connector and the other monitors are using Sewell DisplayLink USB to DVI connectors:
    http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
    Everything seems to be working smoothly EXCEPT there are times when I bring the MacBook Air to the office and connect it and all the display settings do not seem to be saved. The arrangement and monitor rotation is not the way it was when I left.  I have even tired shutting the computer down, restarting it correcting the configuration and then saving and restarting again.  When it boots back up the rotation is correct (somtimes) but other settings such as arrangement or background may not be correct.
    Any thoughts?
    I love the Air and I would hate to go back to my ThinkPad but if this won't work then I will need to.

    Quick update, I downloaded the mostt recent drivers for the Sewell adapter and that seemed to work.  Which is strange because I thought i had done this previously.
    None the less it looks like we are good to go now.

  • Can I get mirrored displays on my external monitors?

    So I've got a small recording studio and I just got two monitors for free and want to get them working with my Macbook Pro. I know that if I want 3 independent screens, I'll have to get an external box like the Diamond BVU195. So in lieu of doing that, I thought I'd just get a VGA splitter (run into a VGA to mini adaptor into the macbook), so both of the monitors would display the same thing (There's two seats in the studio, that way both people could easily look at the same thing). Is this possible? I've been told it is, but I can't get it to work. When I plug both monitors into the splitter, the left one doesn't flinch, and the right one goes black and gives me an error "Out of range of signal. Cannot display this video mode. Change computer display input to 1600x1200 @ 60 Hz". Neither 1600x1200 nor 60 Hz are valid options for me to change to, and clicking the mirroring option in the display settings only makes the right screen and my macbook screen identical. I'd like the macbook screen independent of the two external screens. Any ideas?

    No, no 15" MBP screen is capable of 1920 x 1080 or 1920 x 1200 resolution. To get higher resolution on your external monitor than on your built-in display, put the external monitor into Extended Desktop mode instead of Mirrored mode. Then you can set their resolutions separately and use each at its maximum resolution. To toggle between E.D. and Mirrored, press Command + F1.

  • Late 2010 MBP WIll No Longer Display 1080p for External Monitor

    I currently use my 15" 2010 MacBook Pro with an external monitor via an HDMI cable using the Moshi HDMI miniport adapter. Recently when I connect the monitor (I've also tested on a different HDTV and have had the same issue) it recognizes a signal but all it displays is black. Only when I change the signal to 1080i do I get a picture (a poor quality picture). Is there any fix for this? At this point I'm thinking that it's either the adapter or the MBP's hardware that is messed up. I have been using this HDMI adapter without issue since the summer.
    Any help would be appreciated.

    To light up automatically, your display must appear in:
    About this Mac > ( More Info ) > Graphics & Displays ...
    ... by Make & Model.

  • How to switch off internal macbook screen when using external monitor(s)

    as far as i observed, adding external displays ( running different screens on them, not mirroring)  to a macbook pro  increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
    simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
    especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
    i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
    imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
    (would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
    turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
    so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments)  when working with big external screen(s)  connected to the laptop ?

    this thread talks about running several monitors as advertised by apple and running demanding task on them.
    with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect.  this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius.  not to mention that the fans will run loud well before that.
    again this is on hardware checked and ok-ed by apple service.
    the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

  • How to display 2560x1080 on external monitor from MBP or MBA?

    Is there any way to make MBP 17 (Intel HD and nVidia GT graphics, SnowLeo) or MBA 13 (Mountain Lion) display 2560x1080 on external monitor (LG 29" ultrawide)? My MacPro with RadeonX1900 card (10.5.8) does it perfectly but I cannot find a way to get the laptops to do it. Tried res. switching apps, still no good. Thanks.

    It worked perfect for me. Maybe settings should be different for your laptops. In my case I'm using a MBP 15" with a GeForce 330M.
    The monitor I have is the LG 29EA93 (21:9) @ 2560 x 1080.
    Make sure you have exactly same values in Switch Res X. Special attention to "Scan rate".
    You can see in the capture below that it's working
    and, just in case, here you have the settings that worked for me
    It might be also different for each video card...
    Greetings!!

  • White screen, but you could get the display via an external monitor.

    Hi,
    A few weeks ago, my Macbook pro(A1212) stopped displaying. It only showed a white screen, but you could get the display via an external monitor. A friend looked at it and we discovered a burnt Mosfet (SI3443DV) which was item Q9400 on the motherboard. He went and changed it but it only displayed for less than 5 minutes and it went back to the white screen. would you please advice on what to do since i am not in a financial position to take it for repairs at the apple store?
    Joe

    Forget it.
    1: If it was tampered with, then it doesn't qualify for warranty or AppleCare.
    2: Repairing it will incur a new expensive logicboard, because that's how they do things. Swap parts out.
    3: No money, means no Mac.
    Sorry. We don't do hardware repairs here.

  • MacBook Pro to my external monitor

    How do I hook up my MacBook Pro to my external monitor if I don't have an HDMI connection or a DVI connection port on my laptop?

    Of course! some of the adapters can be purchased at best buy but are usually kind of expensive. I saw an HDMI adapter at Home Depot the other day for $7 which is a good deal.
    Although, im not even sure if youre in the U.S., so this information be irrelevant to you anyway haha.

  • Is it possible to use the iMac display as en external monitor?

    I want to connect my powerbook up to an iMac using the display as an external monitor for the laptop. Is this even possible? Any feedback would be appreciated.

    Hello,
    I've seen this post at least a hundred times. Has
    anyone actually had the gusto to try this idea?
    I don't remember where the page was. But, I posted it's link several months ago in the forums during another discussion.
    But, the guy who had done it to his iMac G3 had very poorly documented his conversion.
    Basically, he took and wired signal to same signal on the monitor, and adapted his power supply and other items to work properly in the modified setup.
    So, it is possible. You just need to sit down with the schematics and wire signal to same signal, and make sure you account for all the variables. It may take some resistors, etc. to get the adaptation just right.
    I don't have any reason to do it myself, so I'm not going to tinker with it.
    If I remembered the link, I'd post it. But, it wouldn't do much good anyway since his HTML formatting was severely messed-up. The end-result was accurate information that was scrambled around on the screen in such a way that you couldn't decipher it anyway. If he had done the HTML work properly, it would be in a formatted table. But, instead the information was scattered all over the screen in an illogical format. So, it wasn't of much real use.

  • HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

    I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
    With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
    I am using the HDMI and the mini HDMI connectors.

    I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
    With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
    I am using the HDMI and the mini HDMI connectors.

  • Time Code displayed on an External Monitor? Is this possible?

    I'm sure this is a dumb question, but is there a way to view your FC time code on your footage through your external monitor? I selected the show time code overlays from the viewer but it only shows up on the monitor on the computer screen and then goes a way when you play a clip. Is there something I’m missing that will allow me to watch the time code on playback, and on an external monitor? Thanks.

    BIG TIME...by Digital Heaven:
    http://www.digital-heaven.co.uk/bigtime/
    This will allow you to have TC display on one of your computer monitors. You cannot have it display on an external monitor...not on any NLE I know of. Not unless you are outputting to a deck and you have TC on the deck (the SUPER out on the back) routed to the monitor.
    Shane

  • Can I use MacBook pro A1211 with external monitor, screen has died but

    CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine

    Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.

Maybe you are looking for