Applying template to imported topics creates book folder

Applying the template creates a book folder for each topic
(not visible in the Project view, but is visible in Windows
Explorer) and moves the htm file into the folder. No other files
are in the folder.
I am generating webhelp htm files, and providing the
individual htm files to the developer, and the files must be in a
specific folder (the one in which all of these book folders are
created). Manually moving the files back to the correct folder is
not doable - I generate frequently.
This does not seem to happen on all files, but on most. Any
idea what is causing this, and how I can make it stop?
Thanks!

Hello again
Normally, yes. But in this case you actually
want to move the files using Windows Explorer. Actually,
it's really the only real option you have.
Think of it like this. RoboHelp messed with you by moving the
files to an area you can't see from inside RoboHelp. So you have to
mess with it by undoing what it politely did!
You may also wish to consider upgrading to 7. I've never seen
a report of this in 7.
Cheers... Rick

Similar Messages

  • Notice msg: 'book folder' was created

    Hi,
    After removing the "_" in between words in the Topic Title
    field of the Topic Properties dialog box, a "Notice" pop-up window
    appears stating the following:
    Note that the 'book folder" C:\ (location of
    topic)\topic_name.book\, was created to hold the document and its
    resources.
    I click the OK box to close the Notice window.
    I've never seen this message before when removing the
    underlines in the Topic title. Is this typical RH behavior or have
    I done something wrong to prompt this notice message to appear?
    Thanks,
    FMnRH

    Hey folks, just noticed this thread and would like to tack on
    something to Rick's excellent advice.
    There's another bug that got buried in all this.
    (great emoticon for Halloween!)
    FMnRH's first message mentioned that this whole mess started
    during the act of renaming topic titles that had underscores.
    I call that the "Topic Title Underscore bug" and there is a
    fix for it.
    Note: I don't think it has anything to do with the ".book
    bug" but it is worth fixing the Topic Title bug anyway so it might
    be less likely to happen again.
    Technical Support and engineering have issued the Topic Title
    Underscore fix and you'll find it in the knowledge base (kb402006).
    "Title changes to match file name when importing topics into
    RoboHelp 6"
    http://www.adobe.com/go/kb402006
    Since FMnRH is compiling HTML Help, I thought I'd add a
    couple more Knowledge Base articles covering RoboHelp 6 issues:
    "Generic Windows crash error message when you export
    Microsoft HTML Help from Adobe RoboHelp 6" (kb401651)
    http://www.adobe.com/go/kb401651
    "Error, "Internal error encountered, Failed to generate
    WebHelp." when you generate a merged project - Robohelp 6"
    (kb401652)
    http://www.adobe.com/go/kb401652
    Good news: So far, I have not encountered any of these issues
    in the new Adobe RoboHelp 7!
    Have a happy halloween
    john

  • Validation rules applied to data migration templates at import

    Hi everyone!
    First post here for me, so please bear with me if I missed something.
    My company has just started the initial implementation of ByDesign. We come from a set of disparate and partially home-grown systems that we outgrew a few years ago.
    As part of this initial phase, we are basically re-creating the data on customers, suppliers, etc. since none of our existing systems makes a good source, unfortunately. We will be using the XML templates provided by ByDesign itself to import the relevant data.
    It has become clear that ByDesign applies validation rules on fields like postal codes (zip codes), states (for some countries), and other fields.
    It would be really helpful if we could get access to the rules that are applied at import time, so that we can format the data correctly in advance, rather than having to play "trial and error" at import time. For example, if you import address data, the first time it finds a postal code in the Netherlands which is formatted as "1234AB", it will tell you that "there needs to a space in the 5th position, because it expects the format to be "1234 AB". At that point, you stop the import, go back to the template to fix all the Dutch postal codes, and try the import again, only to run into the next validation issue.
    We work with a couple of very experienced German consultants to help us implement ByDesign, and I have put this question to them, but they are unaware of a documented set of validation rules for ByDesign. Which is why I ask the question here.
    So just to be very celar on what we are looking for: the data validation/formatting rules that ByDesign enforces at the time the XML data migration templates are imported.
    Any help would be appreciated!
    Best regards,
    Eelco

    Hello Eelco,
    welcome to the SAP ByDesign Community Network!
    The checks performed on postal codes are country specific, and represent pretty much the information that you would find in places like e.g. the "Postal Codes" page in Wikipedia.
    I recommend to start with small files of 50-100 records that are assembled of a representative set of different records, in order to collect the validation rules that need reactions based on your data in an efficient way. Only once you have caught these generic data issues, I would proceed to larger files.
    Personnaly I prefer to capture such generic work items on my list, then fix the small sample file immediately by editing, and do an immediate resimulation of the entire file, so that I can drill deeper and collect more generic issues of my data sample. Only after a while when I have harvested all learnings that were in my sample file, I would then apply the collected learnings to my actual data and create a new file - still not too large, in order to use my time efficiently.
    Best regards
    Michael  

  • Could not apply template to topics

    I was using a template in a RoboHelp HTML help file. Later, I made some changes to the header (changed the header image) and when I tried to apply the modified template, it failed. i.e. it did not get applied to the already existing topics. On the other hand, if I try to create a new topic, the template gets applied. Also, I would like to know how to apply the template for multiple topics at one go.
    I am using RoboHelp HTML X5.0.2
    Your help is very much appreciated.
    Thank You.

    Hi there
    I'd like to amend Colum's response a bit.
    You only see the advisory Colum mentioned if you choose to change a Template Element such as a Header or Footer from a topic the Template is associated with. Because a change was made at the topic level, the dialog is then triggered.
    If you are making changes at the template level, RoboHelp assumes you know what you are doing and simply complies by updating all topics associated with it silently.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • LR 4 & 4.1 can't create new folder manually during photo import

    Windows 64, i7, 12GB RAM
    I don't seem able to create a new folder manually on photo import.  This still works fine on the same PC with LR3.6.  Anyone else seeing this?  Thanks.

    I've sometimes found the 'Make New Folder' option to be a bit hit and miss on Win7....so I generally avoid it. In your case, wouldn't it be easier to have Lightroom create the folder for you by setting up your Destination panel as follows:
    Obviously the selected target parent folder in your case would be "Photos Working Folders", use "Organize: Into One Folder", tick the Into Subfolder box and enter the name of the sub-folder you want, e.g. raw0015. As you can see, if the sub-folder doesn't yet exist, Lightroom then shows you that it will be creating it for you.

  • Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
    Thank God Apple hasn't (yet) broken bash.

  • How to create a template for pages in a book

    How to create a template in Pages to create camera ready pages for publishing a book?

    Nothing is "camera ready" these days, it is all digital.
    What is it you need to know, a book can take many forms.
    Does it contain color photos, spot colors, purely black ink etc?
    Peter

  • Problem with xsl:import and xsl:apply-templates select="element_name"

    I import a xsl tranformation into another xsl file.
    During the transformation i want to limit the transformation to certain xml elements using the select attribute in apply-templates. However if I want restrict to xml elements whose templates are defined in the imported file, they will not be called.
    I'm using currently JWSDP1.4 but problem was also with 1.3.
    Can anybody help: Is this not xslt spec compliant or just a bug inXALAN ?
    regards pszawlow

    Solved it by myself:
    the problem was not the import but the following:
    xml file: looks like:
    <a>
       <b>
       </b>
        <c>
        </c>
    </a>xsl file looked like and should omit output of <c> </c>:
    <xsl:template match="/">
    <xsl:apply-templates select="b" />
    </xsl:template>
    <xsl:template match="b">
    </xsl:template>
    However / is not the level <a>, which I thought. So there was no matching <b>.
    I changed the xsl file to:
    <xsl:template match="/">
    <xsl:apply-templates />
    </xsl:template>
    <xsl:template match="a">
    <xsl:apply-templates select="b" />
    </xsl:template>
    <xsl:template match="b">
    </xsl:template>
    and it worked !

  • Import directly to Audio books folder

    Hello
    is there a way to import directly to an assigned folder.( audio books) For example I imported a cd book all the tracks were imported as tracks and could I not sort them out. Is there a purpose for the audio books folder.
    Thanks to all that help.
    Troy

    When iTunes open check General preferences under iTunes on the menu bar to see if the category Books is checked.

  • How do I import existing contract with just "Address Book" folder?

    I did a clean install of Leopard, and now my Tiger backup is unbootable. I do have access to the files, though. I need to get my contacts from my address book from my Tiger backup. I can't seem to get the Leopard Address Book to recognize any contacts from the old ~/Library/Application Support/Address Book/ folder on my backup.
    How do I accomplish getting my old contacts to my new install?

    I figured it out. I took the ~/Library/Application Support/Address Book/ folder from my old Tiger backup and placed that in my new Leopard /Library/Application Support/ while temporarily renaming the original. Opening up Address Book from there then opened up my old contacts. I then did an export.
    After that, I deleted the old ~/Library/Application Support/Address Book/ folder from my Tiger backup I put in my Leopard system, and restored my original Leopard /Address Book/ folder.
    Then, I just imported the export I did from the old data.
    Tada.....it worked.

  • When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    Before you begin the import, edit the properties of the tracks to set the Album Artist to Various Artists and Part of a Compilation to Yes.
    For more info. see Grouping tracks into albums.
    tt2

  • When is Lr getting more book templates or ability to create/modify templates?

    When is Lr getting more book templates or ability to create/modify templates?

    Hello Telmo,
    first, the most here are users like you, not Adobe's employees. BUT there is a way to interest Adobe's development team is to use the "wishform" and maybe your "When is Lr getting more book templates or ability to create/modify templates?"  can serve as a suggestion.
    Here at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform, where you will find this: "Use this form to request new features or suggest modifications to existing features."
    Hans-Günter

  • How to delete originnal Personal Address Book folder when importing address boook from another PC?

    When importing an address book file into Thunderbird the original Personal Address Book remains as the default even though it's empty. Is there a way to delete this empty 'Personal Address Book'? Thanks .. Andy TB version 24.3.0

    For some reason, ctrl+a didn't move the whole list. I had to move them one at a time. Is it so hard to let the user delete the Personal Address Book default and replace it with an address book of their choice?

  • Can I set up a template for importing images in QT Pro?

    I would like to set up a process where I define a "template" of how I want a QT Pro movie to be created by importing a bunch of image files in a folder. For example, I would specify it to import image1,image2, image3 etc. that would all be in a folder. Once imported into QT I would define various time points in the movie with names like, Part1, Part2 etc. Then I would save this out using a particular compression choice. Now I would like to take that template and point it at another folder whose image names would be the same (i.e. image1, image2, etc.) but the images would actually be different pictures. This way I could create a series of movies that all have the same compression and time point names (I think in QT these are called chapters), but are actually movies of different things. Is this possible with QT Pro? If not, which QT creation tool would allow me to do this?
    Thanks in advance to anyone who can help me.

    QuickTime is AppleScript aware and has its own "dictionary". Many scripts and droplets have already been compiled and you can download them from this link:
    http://www.apple.com/applescript/quicktime/
    Some need further editing to update them to version 7 features but it's not difficult using the Script Editor app.
    Tiger's new Automator app could also be used but its feature set is rather basic. Newer actions are available for download from the Mac OSX Downloads page.

  • How to fix lost connections to original high-resolution pictures in iPhoto and how to import an iPhoto Book from one iPhoto library to another

    Hi there,
    I am using a MBP Pro with 8 GB cache and 1 TB HDD from beginning of 2011 with OS X Yosemite and iPhoto version 9.6 (910.29).
    I created an iPhoto Book to print which contains my best pictures of 2013 and 2014. Then I got an error message when I wanted to print the book, saying (translated from German):
    Book could not be created.
    With photo p233432343.jpg there was an error. The original version of that photo with full resolution could not be found or is damaged. Please replace the photo or delete it from your book.
    When I enquired further, I found out, that many, many pictures in my iPhoto library have that problem - only the thumbnail picture is found by iPhoto, but not the one with the high resolution. When looking at the photos in detail one sees that they are not sharp because obviously the photo book only refers to the thumbnail. When I went into the iPhoto Library using Finder, I saw that the original high res photos are still there. As there are an estimated 3000 photos with a lost connection (some still have, it but about 1/2 of my photos don´t), it does not make sense to import those photos manually. This photo book is just the tip of the iceberg, so to say.
    Then I looked for solutions in some forums. I had two lPhoto libraries, one on my HDD (120GB) and one on an external HDD (175GB). Assuming there might be problems, I have deleted (moved) the one on my HDD, because the "right one" is the one on my external HDD and started iPHoto again using the alt key. But that did not work either.
    I then tried to repair my iPhoto library using iPhoto Library Manager, and merged and rebuilt libraries. The library that came out was crap - all folders that had lost connections to the high resolution pictures now have zero photos in it. Also it is lacking the projects, including the photo book I created.
    Then I went to find out if there is a way to import the iphoto book project from the old, corrupt library into the new, repaired library but could not find anything. It can only be exported as a file structure or website. As the file structure is missing the high res pictures, that does not even solve the "little" problem of the photobook.
    I would REALLY appreciate your help on the two questions:
    1- Can you advise what I need to to do to to get the connection to the high resolution photos established again  ? As it is more than 3000 photos, I use an automated way of reestablishing that connection. Probably an answer to this question would make question 2 irrelevant.
    2- Do you know if there is a way to export and import a book project created in iPhoto from one library to another ?

    1 - Select  the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option.  This will take you to the folder containing the original file with that file selected by the Finder. 
    You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also.  Made sure what is found is the large, original version and note were it's located.  Search all of your drives with FAF just in case.
    If you don't fine the full sized version then the only recourse is to use a file recovery application like   SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered.   If you find enough files to make the purchase of the software worthwhile buy it and recover the files.  However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
    2 - book projects are just entries in the library databases and can't be exported to another library. 

Maybe you are looking for

  • Using sender file adapter to read the most current file

    Hi, in my sender file adapter , i have to read the latest file- all files in  the source directory are named as <filename><timestamp>.txt . I need to read the file with the latest timestamp (i.e. the most current file ) How do i configure this using

  • Ical export 1 calendar

    Hi, Is it possible to export 1 calendar to an ics file ? Now I only see the option to export all calendars in iCal to an archive as backup file. or is there another option to save just all the data from 1 calendar to an ics file ? Jay

  • Widget looping music that won't go away!

    I was using my dashboard today, and clicked on the movie widget to see a movie trailer.  Ever since the soundtrack has been looping and looping!  I've taken everything off my dashboard, restarted my computer.  I checked out the activity monitor and I

  • Username and password reset for emails

    Hi, I have recently upgraded my phone and my husband is now having my Blackberry.  However, I can't remember my username or password to login to change the email address over.  Can anyone help me.  I have phoned O2 who can't help.  My husband is with

  • Authorization error in CK24 (Marking standard costs)

    Hello, I have created new cost estimates for certain materials. Next, I need to mark and release the cost estimates. When I execute the Price Update using transaction CK24 I get the following error message in the log: CK     701   Marking not authori