Appmenu-qt causeing trouble since KDE 4.9.5

Hey guys,
I just updated to KDE 4.9.5 just to discover that having appmenu-qt installed (I don't use it) makes menu bars go to nirvana. I simply uninstalled the package and the menu bars appeared again. Someone else experiencing the same issue?
The problem is, at the moment I don't need/want appmenu, but it will definetly become interesting in KDE 4.10 when KWin's decorations will finally be able to use it, it would be nice to not cause trouble when not even used.

It makes menu bars go to nirvana. Thanks I love my menu bars .

Similar Messages

  • HT6114 my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhg.

    my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhgh, or if I wait a while it finally fixes it's self. If this happening to anyone else?

    I don't think that is normal behavior. The long press is possibly causing the system to force power down, which would then allow it to power back up.
    Just to make sure, all drivers are up-to-date? Are there pending BIOS updates? If so, you'll want to make sure it can restart properly before applying the BIOS update
    Try an Ubuntu LiveUSB or LiveCD to rule out software issues.
    If that doesn't work, try taking out the battery and AC, pressing the power button ten times, then holding it for ten. This is usually the remedy for another issue, but try it anyway.
    If that doesn't work, then try resetting the BIOS settings. Then try unplugging the CMOS battery overnight. Otherwise, might have to call for warranty.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • I downloaded firefox update had nothing but troubles since comp crashing how do i send my bookmarks from firefox to ie on this system

    i downloaded firefox update, had nothing but troubles since, computer crashing when i try to open, or cursor lag for a long time ie. i try to move to do something it has to think about for 30 seconds to having to pushing reset to get anthing hapening
    but still freezes up i put my comp into a very good repair store cost me $119 to only to find no problem with computer, they had it running ,burning , doing everything properly, but they were using ie, as soon as i stoped that and went to firefox, back to lag etc. com bluescreen then crashing when i got home twice so far tried using previous version in system same problem, how do i send my bookmarks from firefox to ie on this system, so i can completely uninstall then reistall a fresh earlier version

    I have to agree, fixing something that was working fine and replacing it with the new crap has led me to switch browsers.BIG FAIL MOZILLA
    Why do people do this shit.
    Turn off updating to keep your good working version or you will be forced to use the new version that is missing some well used features.

  • Urgent! Can div's ids cause trouble

    Can div's ids cause trouble with a javascript loaded flash?
    I'm using the swfobject javascript to load a flash animation
    (this code helps the submenu layers appear on top of the flash
    animation and makes that weird gray line in IE go away).
    I have many divs without id, the animation should load into a
    div called "mainflash". When I have all those div inside the same
    table as the "mainflash" div, the flash animation does not load.
    After many tests I found out that only with all those other
    divs in the different tds of the table the animation fails to show,
    which leads me to thinking the .js code might get confused with all
    those unidentified divs.
    Is that possible? This only happens in firefox 2 when using a
    mac.
    Here's the page without the divs:
    http://www.l3hm.com/anim_test9x.php
    Here's the page with all those divs:
    http://www.l3hm.com/anim_test4.php
    I used php includes, but I also tried having all the content
    in the page without the includes and in html and still it didn't
    work.
    Please help me out my client is becoming impatient.

    serg2049 wrote:
    > Can div's ids cause trouble with a javascript loaded
    flash?
    >
    > I'm using the swfobject javascript to load a flash
    animation (this code helps
    > the submenu layers appear on top of the flash animation
    and makes that weird
    > gray line in IE go away).
    >
    > I have many divs without id, the animation should load
    into a div called
    > "mainflash". When I have all those div inside the same
    table as the "mainflash"
    > div, the flash animation does not load.
    >
    > After many tests I found out that only with all those
    other divs in the
    > different tds of the table the animation fails to show,
    which leads me to
    > thinking the .js code might get confused with all those
    unidentified divs.
    >
    > Is that possible? This only happens in firefox 2 when
    using a mac.
    >
    > Here's the page without the divs:
    http://www.l3hm.com/anim_test9x.php
    >
    > Here's the page with all those divs:
    http://www.l3hm.com/anim_test4.php
    >
    > I used php includes, but I also tried having all the
    content in the page
    > without the includes and in html and still it didn't
    work.
    >
    > Please help me out my client is becoming impatient.
    >
    You could try this - in your test.php file - find this line
    of code.........
    <div id="mainflash" style="border: 1px solid rgb(99, 101,
    105); padding:
    3px; width: 466px; height: 357px; position: absolute;
    margin-top:
    49px;"><embed type="application/x-shockwave-flash"
    src="l3anim.swf"
    style="" id="main" name="main" bgcolor="#FFFFFF"
    quality="high"
    wmode="opaque" height="357" width="466">
    </div>
    and replace with.........
    <div id="mainflash" style="border: 1px solid rgb(99, 101,
    105); padding:
    3px; width: 466px; height: 357px; margin-top:
    49px;"><embed
    type="application/x-shockwave-flash" src="l3anim.swf"
    style="" id="main"
    name="main" bgcolor="#FFFFFF" quality="high" wmode="opaque"
    height="357"
    width="466">
    </div>
    chin chin
    Sinclair

  • Does iDVD word with Yosemite? Having trouble since I upgraded to it.

    Does iDVD work with Yosemite? Having trouble since I upgraded to it two weeks ago.

    When you say iTunes 10 do you mean 10.5.3. If not, upgrade to it.
    If trying different USB ports, even  a number of times, does not solve your problem then look at this link. If you are not using Windows then search for something comparable.
    http://support.apple.com/kb/TS1538

  • Having trouble sinc. My daughters new sony DVD via USB, as it continues to

    Has you can tell I am new/green @ this.
    Having trouble sinc. My daughters new sony DVD via USB, as it continues to not reconize device and etc.
    N
    Win. Vista   Windows Vista    

    I'm not sure what this has to do with the iPhone. It sounds like you should be asking Sony for help.

  • Which Ipod Updater was causing trouble with ipods??

    I read a while back that there was an ipod updater that was actually making the ipod not work can anyone tell me which updater this was?

    I updated my ipod video w/ that ipod updater that causes trouble is there a way for me to switch back to the previous update because now the ipod plays the first 2 sec. of a song and then shuffles through the rest of the songs not allowing me listen to my downloaded music. Please help w/ my concern or let me know if there is a newer updater that will work for me.

  • Using the integrated USB hub on my Thunderbolt Display causes troubles

    I just purchased a MacBook Air and a Thunderbolt Display. Unfortunately, when I connect USB plugs to the Displays buildin USB hub, I'm getting severed connections all the time (USB-Connection lost, Firewire-Connection lost, Ethernet-Connection lost...).
    I really loved the idea of not having to use external USB-hubs as this only clutters my desk - but the Displays internal hub cannot be used savely (I have a couple of hard drives connected via FW and USB to the Display - this has already resulted in data loss (fortunately I had a backup).
    As soon as I'm NOT using the Display's USB ports everything is fine (the Display's FireWire and Ethernet ports do not seem to cause any trouble).
    Anyone else seeing this?

    Plugging an additional USB hub into the integrated USB hub extends the problematic behavior even further.
    If I eject a thumb drive from a USB hub that's attached to the Thunderbolt display hub (for example), it will never recognize that thumb drive again, on any of the USB ports on the display or any additional hub connected to the display, until I reboot with no added USB hub, and then reconnect an empty hub, and then add devices one at a time.
    I've also noticed that while some devices drop off, some continue to show up in the system report, even when they have been properly ejected or disconnected. Refreshing the system report doesn't update with what's really going on...
    Weird... So since mountain lion, I don't disconnect any USB devices from the Thunderbolt display, unless I really, truly must.

  • DW CS6: Extra empty blank line in code view causing trouble!

    Hi all,
    I searched for hours for a solution to the following problem, without any success.
    When coding in Dreamweaver CS6 (Version 12.0, Windows 8.1), an extra non-editable blank line is automatically added at the bottom of the document (in code-view). This is a nice feature, since it clearly separates the end of the document from the rest of the DW user interface. BUT:
    WHEN you have "Word Wrap" disabled (i.e. horizontal scroll bars appear if one or more lines are longer than the current view),
    AND no line is actually longer than the view (i.e. NO horizontal scroll bars),
    AND you click somewhere into the document while the vertical scroll bar is at the very bottom,
    THEN the code view jumps one line upwards causing a selection of 2 lines.
    This might not seem to be a big issue at first glance, but surprisingly often all of the mentioned conditions are met.
    Is there any possibilty to somehow get rid of this problem?
    Note: The problem does not occur when any of the above conditions is false.
    Cheers!
    CamelCase

    This is strange...
    Yes, I just updated DW to 12.03 a minute before I posted the question. ;-)
    Are you sure you cannot reproduce it? Is there a blank line at the bottom of your editor as well?
    Here are the conditions again:
    Word Wrap is disabled.
    No line too long for vertical scrollbar to appear.
    Scroll fully down in the code view.
    Click somewhere into the document.
    Effect: The view jumps exactly one line upwards (such that the mentioned blank line just disappears), and instead of a blinking cursor, two lines are selected.
    Here is a screenshot before/after the click:
    I appreciate any help. Really, thank you!!

  • Sony XAVC files from F55 no longer play back at all and cause glitches since update today - 13th Dec

    Hi,
    Since updating Premiere today any Sony XAVC files I have in my projects no longer play back and cause fairly big glitches. All was completely fine yesterday before I updated. Does anyone have any info on this? Hoping for a fairly quick patch as it's rendered a time sensitive project I'm on unworkable.
    Thanks

    Thanks Jim, trying this now and hopefully it'll work

  • JVMTI : AgentSetEventNotificationMode Causes Troubles in Lotus Notes

    Hi Everybody
    I have a JVMTI agent that i used to profile many java application ( Eclipse, Notes ...)
    I discover that I have some troubles with Lotus Notes Release 8.5.2FP4 on WIN7 64x
    (troubles like same time sigin windows don't open , contact window empty and it display nothing ...)
    when trying to investigate it a find that the problem occured when I call JVMTI method SetEventNotificationMode with JVMTI_EVENT_CLASS_FILE_LOAD_HOOK as parameters
    event with an empty callback I have always problem but only with notes
    in Trace log I found message like :
    *"An error occurred when activating automatic grouping com.ibm.rcp.aaf.startup (944).*
    *Caused by: java.lang.NoClassDefFoundError: com / ibm / icu / util / GregorianCalendar ... "*
    *"Errors when calling the plug-in code: com.ibm.rcp.personality.framework"*
    *"The plug-in com.ibm.rcp.aaf.startup failed to load the class com.ibm.rcp.aaf.startup.Startup."*
    when I try to desable this Event (JVMTI_EVENT_CLASS_FILE_LOAD_HOOK ) evry lotus notes fonctionnalities works well
    Any Idea ?
    Thanks a lot

    What version of Notes do you have? I get a message saying "Domino Web Access has not been certified to work with this browser" and I can choose one of:
    Try Domino Web Access anyway
    Use Lotus iNotes ultralite mode
    Use WebMail
    Logout
    I try Domino Web Access anyway
    As Mike says, it is pretty much useless with a touch screen. I can preview a message, I can create a new message, but I can't type in the body of the new message.
    I can switch to Lite, but the text is so small I can't read it. Clicking New doesn't seem to do anything here.
    I start over. Apparently that Lite mode isn't the same as Ultralite. The Ultralite mode seems to work fine and even has a distinct iPhone-esque look to it.
    The last option, just WebMail looks like a real old, rude and crude webmail version done by somebody's kid that is good with computers.
    So, see if you have access to the Ultralite mode. That one is definitely the best. Our Lotus Notes servers also have IMAP servers as well. I tend to use those instead of an actual Lotus client.

  • 11506 extra 302s causing trouble

    Hi,
    I have 2 sets of services supporting a 2 content rules, one is dynamic content the other static they both get requested together
    The pages are dynamic, the css and images they contain are static
    when a page is requested the css gives the dynamic content back, then the browser requests the first static element and the css gives back a 302 to the same url if the browesr rerequests this then all should be well (if an unnessecary slight delay)
    The trouble is that this 302 appears to be causing some browsers to not use the css (the first such element)
    On other pages the first image can load after the others.
    What steps should I take to find its cause and remove it?
    here is an example config that mirrors my real one
    service static
    ip address 192.168.0.10
    protocol tcp
    keepalive type http
    port 8080
    keepalive port 8080
    keepalive uri "/keepalive.html"
    active
    service dynamic
    the same (including ip address) except-
    port 8090
    keepalive port 8090
    owner webapp
    content staticsite
    vip address <public ip or ip used by ssl-proxy-list>
    protocol tcp
    port 80
    add service static
    active
    content dynamic
    vip address <same public ip or ip used by ssl-proxy-list>
    protocol tcp
    port 80
    url "/theApp/*"
    sticky-mask 255.255.255.240
    sticky-inact-timeout 1800
    add service dynamic
    active
    so the dynamic url is 'below' the static one /css and /images and /anything are served by static and only /theApp/* is served by the dynamic
    in reality the are 3 static and 12 dynamic services
    running sg0720206 (7.20 Build 206)

    the redirect is because of the change of content rule and the use of persistent connection.
    To avoid the redirect, you can use the global config command "persistence reset remap"
    Regards,
    Gilles.

  • SJSAS v9.0 : jsf-api 1.2 in javaee.jar causes trouble for jsf 1.1 apps

    In Sun Java System Application Server v9.0 (or 9.1), jsf-api v1.2 is embeded in javaee.jar. This causes a lot of trouble when deploy web applications written with jsf v1.1. Is there a way to avoid this without modifying web applications to migrate to jsf v1.2? I got strong reasons/requirements not to migrating source to comply jsf v1.2.
    In JSF v1.2 spec, it states "Faces 1.2 is backwards compatible with Faces 1.1. This means that a web-application that was developed to run with Faces 1.1 won�t require any modification when run with Faces 1.2 except in the cases described in the following section." Does anybody have the experience running v1.1 applications on top of SJSAS v9+ (or JSF v1.2 RI)? What are the best practices?
    Thanks

    It took me quite some time to diving in the codes as my situation is not simple - we have tens of custom coded JSF components/renders written in JSF v1.1 and suddently found everything not working on SJSAS v9. It turns out that I have to remove EVERY jar files related to JSF v1.1 or dependant by JSF v1.1, then it seems working but I couldn't be too sure untill the testing cycle finishes.
    Thanks for the hint BalusC - it helps.

  • Sluggish video (mplayer, kaffeine) since KDE 4.2

    Hi.
    I'm running Arch64 on my home desktop with KDE4.2. Since the upgrade from 4.1 the performance of displaying any video content (DVB, avi files etc.) with either mplayer/smplayer or kaffeine (xine-backend) went down the drain.
    I can't really tell what it is, it just feels slow, it starts to stutter (and seems to repeat a couple of frames) every time you click somewhere else on the desktop or do something else like moving a window or opening KRunner. This is anoying because I used to put kaffeine on the second monitor to watch some TV (DVB) while working but I can't do that anymore. The sound plays ok, only displaying the video frames seems to be messed up.
    Maybe related to that, I can't use any of kaffeine's deinterlacing algorithms anymore. I have the feeling they look worse than before (more like 256 colors) and they drop the video framerate even further.
    I used to have a Nvidia Quadro NVS (which exhibited the problem) but replaced it with a GeForce 9500GT which at first seemed to reduce (but not solve) the problem. However, I have the feeling now that things stayed pretty much the same.
    I have TwinView enabled but also tried things without it - no change.
    I dropped my old xorg.conf in favor of a new (clean) one - no change.
    I tried different video outputs (xv, gl, gl2) - no change.
    I enabled/disabled desktop effects - no change.
    I tried different driver versions (currently using the 180.29-3 from pacman, but also tried 180.22, .27 and .35 in the past) - no change.
    The funny thing is that everything else works fine... desktop effects are smooth, even the video performance does not drop (further) when moving the video window itself with transparency and all that stuff.
    Any ideas where else to look?
    Thanks in advance.

    I should add that the problem seems to exist with other apps besides video as well. I tried with glxgears and by right and left clicking somewhere on the desktop I can make the wheels stutter even though the frame rate shown doesn't drop significantly (about 3800fps every time, even when opening KRunner).
    It seems to me, there's something wrong with updating Windows or anything on a regular basis. Somehow KDE seems to have an effect there. Besides, CPU consumption is never even close to 40% on each core and I had the problem with Qt 4.4 as well as 4.5.
    It's puzzling that I haven't found anything like that on the web or in other forums...

  • Do you have major trouble since that last update?

    It was that iTunes update a few days ago that has made everything crazy. I have had trouble with several applications since.
    DRAG OUT ITUNES of your HD and leave it on your desktop for the time being.
    Works fine now.

    It went away.

Maybe you are looking for