Approval form in edit mode

hi
1 - the standard is calling task 50000075 EXTSRV PROCESS to call the approval form. its shown in display mode
2 - im trying to call ISR_CALL_FOR_CHANGE so the form should open in edit mode
but...... my problem is though it opens in edit more, approve and reject buttons are gone
so cud u pl tel how to poen the approval form in edit mode, wat are the options ?
thanks
bhakti

Hi,
If it is not HCM Process and forms then Iam not very much sure, But anyways you can check out the below task Ids for
1. Edit Form - TS17900100
2. Approve - TS17900101
And Also I do not think if you are planning to use above taskids then in that case you should use them based on the context.
for more information about the above task IDS
[check this|http://help.sap.com/saphelp_erp60_sp/helpdata/en/43/15ce37f1fb5a38e10000000a422035/frameset.htm]
Regards
Pavan

Similar Messages

ProcessPCR_1 (WS50000041) : Web form in edit mode to the approver ?

Hi,
I am working on ProcessPCR_1 (WS50000041)
This template depicts a one-step approval process. When you send the request, it goes
to an approver for approval,There is a web form used for processing the &#56256;&#56443; Request Special Payment.
Now the challenge is the web form should be editable mode to the approver (Currently it is in non editable mode ). Ex. He should have the paychange field in editable mode.
How can i acheive this?
Richard A

Ravi,
I am working on ISR scenario only. Except the CHANGE MODE in the apporoval other things are working fine. Am i really missing any configuration.
The following are the steps i have done.
1.I have configured the single level approval workflow ws50000041 @ V_SCENARIOXMPO and acivated the workflow.
2. In the container &DISPLAYMODE& i am passing the CHANGE .
The approver able to view the form and give his comments @ the comment column. But not able to change the PAY which was created by the initiator.
My requirement is the approver need to change the PAY.
Thanks for your replies!
Richard A

Netui:form in edit mode

Hi,
I am trying to use netui:form in the JSP of the edit mode like this :
<netui:form action="testAction">
     <netui:button value="Valider" type="submit"/>
     <netui:button value="Annuler" type="reset"/>
</netui:form>
but I always get the following error : Action 'testAction' is not a valid action
If I try to use netui:form tag in another JSP (not in the edit mode, for example the JSP displayed after the begin action), it works fine.
And it works fine in the edit mode with a netui:anchor tag. The action specified is called.
Here is the PageFlow Controller :
@Jpf.Controller()
public class favorisController extends PageFlowController {
     @Jpf.Action(forwards = { @Jpf.Forward(name = "success", path = "/site_unisvers/favoris/favoris.jsp") })
     public Forward testAction(TestActionFormBean form) {
          System.out.println("je suis testAction");
          System.out.println(form.getTextBox());
          Forward forward = new Forward("success");
          return forward;
Here is the portlet xml file :
<?xml version="1.0" encoding="UTF-8"?>
<portal:root xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0"
xmlns:portal="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0 portal-support-1_0_0.xsd">
<netuix:portlet definitionLabel="favoris" title="Favoris">
<netuix:titlebar>
<netuix:maximize/>
<netuix:minimize/>
<netuix:help contentUri="/site_unisvers/favoris/help.jsp"/>
<netuix:edit contentUri="/fr/su/unv/unisvers/ihm/favorisController.jpf" action="edit"/>
</netuix:titlebar>
<netuix:content>
<netuix:pageflowContent contentUri="/fr/su/unv/unisvers/ihm/favorisController.jpf"/>
</netuix:content>
</netuix:portlet>
</portal:root>
Anybody can help me ?

My code works fine. WebLogic just didn't update well the config files.
Thomas

User In Planning unit Hierarchy unable to see data form in editable mode

hi all,
we are facing a problem in planning unit hierarchy in Hyperion planning, where we have 4 users, Hierarchy is define as
hierarchy: budget approved
version: approved
Entity: Finance
Senario:Budget
haroon asghar ( owner)
adeel javid (Reviewer)
Naeem asghar (Reviewer)
Imtiaz (Reviewer)
Issue is that,after start the budget activity (promotional path) by Admin, the data form editable to Owner haroon asghar
but after completing his work by haroon,when he promote the planning unit ,the next user in Hierarchy "Adeel javid" unable to see data form in respective planning unit in uneditable data form not only for this user but all rest of the users as well,while i think data form should only uneditable(grayed) for user Haroon Asghar who promote the planning unit.
we have checked all security rights to the users those are "Write access" but still Adeel javid is unable to enter data,so the budget activity is stop due to this problem.
when i remove the planning unit then i log in with all user one by one and see all data form required version,scenario and entity were editable to all users mention above
we want to run budget activity with the above planning unit hierarchy.
plz any one provide the proposed solution of the said issue
we are using Product Version 11.1.2.0.00
Regards
Anwar

Reviewers will not be able to write data to the intersection. Reviewers can only review the data and follow-up with a Reject, Promote, Sign off, Delegate, Originate or Freeze.
Please refer Article ID 1226783.1 in MOS.
HTH-
Jasmine.

How to open an order form of a particular order in edit mode

hi
i need to open a order's order form in edit mode so that it can be approved or any other operations done on that.
there is an similar post but the soln s nt available fr the abve mentioned prob
" i dont knw what are the exact parameters that should be assigned in ordfind so that it will lead to the ordhead"
thank u in advance for any guidance that cud be provided.

I m using oracle appln server 10g forms. I m trying to open tat form using a url.. generally i m accessing via a java program where i m giving tis url.

For Adobe Acrobat X Pro how do you change font size Acrobat in form editing mode?

For Adobe Acrobat X Pro how do you change the font size when Acrobat is in Form Editing Mode? The fonts are different sizes in the highlighted fields. I want the font the same size throughout my document...

Dear Michael:
The documents do not look professional with the 2 different font sizes. And it
is driving me crazy because I cannot figure it out… But I will try the steps you
gave me to change the font size. Attached via e-mail is a screanshot of the
document.
Sincerely, Lisa

How to call a form so as it starts edit mode (new record) directly

Hi,
I want to call a form from a button so as it starts edit mode directly (for a new record).
I also want to pass it parameters for the new record
please help me
thanks

Suppose you want to call the form with the ename as CLARK. You can call the form like this:
<portal_schema>.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<module_id of the form>&p_arg_names=ename&p_arg_values=CLARK
Note that it will not query the database for values unless you pass the argument enamecond as well.
Regards,
Hsiu

Access web app - Check if form is in edit mode

I want to hide some fields when a form is in edit mode but I can't figure out how to check that. I tried
That is not working. Is there another way to check the "state" of a form.
Thanks, Mike

Hi Mike,
Unfortunately, there is no existing method that I'm aware of to know if a view in an Access 2013 web app is currently in Edit mode or view mode. I can sympathize with you on this one since I’ve had many occasions in my apps where I wanted to use something
like this for various scenarios. I will pass along your feedback to the product team. You can set various properties on controls using macros, however, you cannot read control property values on views in Access 2013 web app views. The one exception is reading
values of data entry controls.
About the closest you can come to achieving you end goal would be to do a whole lot of extra work to control basic editing and save operations on that view. For example, you could create a new custom Action Bar button on your view with the same icon as the
existing Edit Action Bar button. Slide that one into the position you want in the Action Bar. For the On Click event of this custom one, you put the view into Edit mode, and then show the controls that you want (which are hidden by default I presume in the
On Load event of the view).
If you want to experiment with this technique, I would suggest trying it out on a copy of the view. There are a couple of caveats to this approach that I should point out. First, don’t delete the existing built in Edit and Save Action Bar buttons (or any
of the built in ones for that matter). Once deleted, you can never get them back. I am always in the habit of sliding ones I don’t want to the far right and then hiding them in the On Load event of the view. That way if I ever have a need in the future to
bring it back, the button(s) is still there for my use and all I have to do is remove the macro that is hiding it.
The second caveat is that once you put your view into Edit mode using your own custom Action Bar edit button and then click the save button to save the record changes, your hidden controls that you wanted to display on initial load will still show for the
next record. That may not be the behavior you want. In that case you would need to also create your own custom save Action Bar button too. In that On Click event, you would use the Save Record macro action and you would re-hide the controls that you want hidden
again for the next record since Access will automatically pop you back into view mode with the save operation. You’ll have to experiment with this if you want to try it. You might need to hide the controls before doing the Save Record action.
Hope that helps,
Jeff Conrad - Access Junkie - MVP Alumnus
Senior Content Developer - Modern Assistance and Support Experience - Microsoft Corporation
Author - Microsoft Access 2013 Inside Out
Author - Microsoft Access 2010 Inside Out
Co-author - Microsoft Office Access 2007 Inside Out
Access 2007/2010/2013 Info: http://www.AccessJunkie.com
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/en-us/legal/Copyright/Default.aspx

Infopath list form displays blank in edit mode in SharePoint 2010

Hi,
I have a custom list in SharePoint 2010. I am using InfoPath 2010 form to Insert and Edit list data. The list was working fine in the past days. Suddenly the InfoPath form displays nothing when I click on the Edit Item Button but its working fine in New
Item and Read Only mode. I checked Form Web Parts--> Content Type Forms--> (Item) Edit Form where the InfoPath form Web Part is missing. I added the InfoPath Form Web Part manually there then the InfoPath form displaying blank where
list data is available. All other lists are working fine in the site collection.
Would somebody help to resolve this issue?
Thanks in advance.

Hi pointtoshare,
When you added a new item in the custom list, whether this issue occurred.
Whether you could customize the custom list form using InfoPath.
Please click on “Customize Form”, it will be opened with InfoPath, check whether the default view has data. And create a new view, set it as default view, publish it , compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Quick Edit Mode and InfoPath form

I have a SharePoint list that has a InfoPath customized form.
The InfoPath form has two drop down fields that have a Data Connection to a another support SharePoint list
The connection allows the second drop down list to be filtered by what the user chooses in the first drop down list (cascading fields).
The data in the support SharePoint list is updated.
If a user edits an item using the InfoPath form all is good BUT if a user edits an item in the Quick edit mode the drop down list fields are not updated with the changes in the support list.
I think this is because if InfoPath is not used the data connection is not invoked and the support list changes are not pushed down to the consuming SharePoint list.
Is there anyway a user can edit an item directly in the SharePoint list and still get the data updated in support lists that use a data connection in the InfoPath form?

Hi,
Yes，it is by default that the Quick Edit feature cannot consume InfoPath data connection. Cascaded Lookup function is not supported on Quick Edit Mode in SharePoint 2013.
As far as I know, there is no solution to enable cascaded lookup function on Quick Edit Mode.
For more information, you can have a look at the blog:
https://spservices.codeplex.com/discussions/457245
http://www.codeproject.com/Tips/758909/Two-Level-Cascading-Drop-Down-in-SharePoint-using?msg=4849625#xx4849625xx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Disable column when in edit mode.

Hallo,
I want the user to be able to input data in some columns of my ALV Grid, but not in all. How can I disable some columns for input, when the ALV Grid is in Input/Edit mode?
Thank you,
Manuel

Hi,
Step 1.
Add this feild in ur Internal table.
field_style TYPE lvc_t_styl, "FOR DISABLE
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-no_input          = 'X'.
gd_layout-cwidth_opt = 'X'.
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
gd_layout-info_fname = 'LINE_COL'.
ENDFORM. " BUILD_LAYOUT
*step-2 * Call this Subroutine before Fieldcatalog........
FORM set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
clear : ls_stylerow.
clear : wa_final-field_style.
refresh WA_FINAL-FIELD_STYLE[].
Populate style variable (FIELD_STYLE) with style properties
The following code sets it to be disabled(display only)
if child deal Ticket Number Approved or rejected.
LOOP AT it_final INTO wa_final.
    IF wa_final-apprd = 'X' or wa_final-rejct = 'X'.
        ls_stylerow-fieldname = 'APPRD' .
        ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
        APPEND ls_stylerow TO wa_final-field_style.
        MODIFY it_final FROM wa_final.   "my Internal table, Replace ur internal table.
        ls_stylerow-fieldname = 'REJCT' .    " ur field name
        ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
        APPEND ls_stylerow TO wa_final-field_style.
        MODIFY it_final FROM wa_final.
   endif.
like this u have to add for all colunms in ur report which u
want to disable.
Note the stylerow appending should be in Alphabetic order
ENDLOOP.
ENDFORM. " set_specific_field_attributes
Thanx
bgan.

Text Caption appears in Edit Mode but not in Preview Project or Web Browser

I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76. I've added a simple text caption with these options:
Timing Display: Rest of slide
Appear after: 2.0 seconds
Transition effect: Fade in only
In: .5 seconds
And Visible is checked
I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
Everything on the screen works including the click box, the animated text and the failure caption. For some reason the text caption and the arrow are not appearing except in Edit Mode. In Preview Project, they disapper but the click box, failure caption and animated text work fine.
I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
They funny thing is, is that the text caption and arrow works fine on other screens in the project. I have 76 screens total.
I'm running Windows XP.
Any suggestions?

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

How to get the view in editable mode with OCA button.

Dear Experties,
I am new to CRM WEB UI ,I have got the requirement to develope a view with OCA button on it and when i click on the button it should direct to the second view and it should open with edit mode.
The Source view is table type and target view is form type.
I am able to achieve this but unable to get it in editable mode.
I have added the below code in do_prep_output method but getting dump at the line
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
The error message is
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Please somebody help me on this
lv_display = me->view_group_context->is_view_in_display_mode( me ).
IF lv_display EQ abap_false.
ELSE.
     me->view_group_context->set_view_editable( me ).
ENDIF.
DATA:    lr_tx           TYPE REF TO if_bol_transaction_context,
          lr_entity       TYPE REF TO cl_crm_bol_entity,
           lr_comp type REF TO ZL_BT131QI__BSPWDCOMPONEN_IMPL.
lr_comp ?= me->comp_controller.
Check lr_comp is BOUND.
lr_entity ?= lr_comp->typed_context->BTADMINI->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
IF lr_entity->lock( ) = abap_true.
    me->view_group_context->set_view_editable( me ).
ENDIF.
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
WHILE lr_entity IS BOUND.
    lr_entity->lock( ).
    lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_next( ).
ENDWHILE.
The following error text was processed in the system:
Source type \CLASS=CL_BSP_WD_MIXED_NODE is not compatible, for the purposes of assignment, with target type \CLASS=CL_CRM_BOL_ENTITY
Exception Class CX_SY_MOVE_CAST_ERROR
Error Name MOVE_CAST_ERROR
Program ZL_ZBT131QI_EMAINLEG_IMPL=====CP
Include ZL_ZBT131QI_EMAINLEG_IMPL=====CM00C
ABAP Class ZL_ZBT131QI_EMAINLEG_IMPL
Method EH_ON_EDIT
Line 33
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Thanks in advance!!!

Hi,
in CRM a context can consist of model nodes, value nodes and, unfortunately, mixed nodes. While mixed nodes implement the same interface as model nodes they can't be casted into a CL_CRM_BOL_ENTITY directly. Instead you need to perform the following conversion in order to get the model node from the mixed node:
DATA: mixed_node     TYPE REF TO cl_bsp_wd_mixed_node,
           entity              TYPE REF TO cl_crm_bol_entity.
mixed_node = me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
entity = ?= mixed_node->if_bsp_wd_ext_property_access~get_model_node( ).
Best,
Christian

Table Creation of new rows in editable mode

Hello,
I'm using Jdev11g.
I create a JSF page with a table, I add a button connected to CreateInsert bindings.
Everything works fine but I want that when a new row is created on the table, the new row must be in editable mode.
Thank's

Hi Max:
According to what you described, it's really wierd. An ADF table is Surrounded by a panelCollection or not doesn't matter in terms of CreateInsert operations, I think. Also each step you said OK doesn't mean that step is 100% problem free towards your final goal. For example, when you drag and drop and ADF table onto a JSF page, you forget to turn on 'row selection', it will be OK, you won't get any error message, but later on when you find that you need to turn it back on, you have to go back to JSF page source, to manually added codes to do so.
The simpliest solution and quickest one is to reinitiate a clean ADF project and do it all over again. It's simple straightforward in my view. Probably don't use PanelCollection first, just drop your ADF table on a form, or af:panelForm, but make sure your table and 'CreateInsert' button is surrounded by a form, otherwise, when you click on 'CreateInsert', nothing will happen. When everything works, then probably back it up and replace your form or af:panelForm with panelCollection. See how it goes.
Thanks,
Alex

Panning Images in Edit Mode?

I've used iPhoto 4 & 5, and noticed that this useful function in the former was missing in the latter. In version 4, by holding the Cmd/ key, I could use the crosshair to pan across and up and down an enlarged image, which was very useful when editing images at full resolution.
I tried to do the same thing in version 5 and instead called up the adjustment panel. Had no luck with any other key combination, so I guess it has been made obsolete.
Even with the capability of editing in full-screen mode for iPhoto 6, not everyone has a gigantic screen that allows viewing of images at full resolution.
So my question to those using the latest version is, when you choose to view an image in edit mode, and enlarge it, can you pan around in it? Move up and down and across and around to another section of the image without using the irritating scroll bars or having to zoom out?
I also find it counter-intuitive that there is no way to view an image at full resolution easily in iPhoto. They should add a button to do that, next to the enlargement slider.
Hopefully someone can answer my queries soon. Thanks!
PowerMac G4 1.25GHz Dual Processor MDD Mac OS X (10.3.9)

Hi Zaihan,
Take a look at this page and you will see you can do full-screen edits (not the same as a button for full resolution though)
http://docs.info.apple.com/article.html?path=iPhoto/6.0/en/hlp253.html
If you move the slider to the right to enlarge the photo, you will get a little navigation window that you can move the photo around in. It's very handy.

Approval form in edit mode

Similar Messages

Maybe you are looking for