Approve/Reject button not appearing in Email , but present in the notificat

Hello Friends,
I am using Po requisition Approval workflow in iProcurement for PR approval.
One strange thing is happening , that in approval emails Approve/Reject button are not appearing but the same are present in the notification.
Moreover , some people are getting emails, others are not.
We have just started setting up the instance for the design prototype , so might be we are missing some setup/steps.
Please suggest , what steps i am missing. Thanks !!!
Regards,
Amit

Verify that the email preference for the users is not "disabled"
Have the user login and go to the preferences link at the top.
OR
SELECT *
  FROM apps.fnd_user_preferences
WHERE preference_name = 'MAILTYPE' AND user_name = '&user' Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

Similar Messages

  • UWL Approve Reject button not visible

    Hello Experts,
    We have implemented Portal 7.0 SP 18 and configured UWL. All task items are appearing correctly.
    But approve and reject button is not visible in UWL. The same is visible in ITS screen when we click on the task.
    Kindly help.
    Regards,
    Nirmal Sivakumar G

    Hi Soral,
    All workflows from ECC is causing this problem. To be precise I have configured a webflow connector to pull the tasks from SAP Inbox. The approve/Reject button should appear in UWL ivew when we select the task item. But only forward and resubmit options are visible.
    I guess the problem is with SP 18 itself. Coz there are similar threads with the same scenario in SP 18.
    Regards,
    Nirmal Sivakumar G

  • POR (Purchase Order Response): Approve/Reject buttons not functioning

    Hi folks,
    In SRM 5.0 extended classic scenario, a POR is sent to EBP from SUS.  The POR is outside tolerances so it triggers workflow -WS14500019.  When a user goes into their Approval Inbox they have the option to Approve or Reject the POR using the Approve/Reject icons.
    When a user clicks on either the Approve or Reject icon, a message appears at the bottom of the screen:
    "Work Item is been Processed, Please Wait"
    When this message disappears the work item is not processed and remains in the Approver's inbox unprocessed.
    If anybody has any suggestions it would be greatly appreciated.
    Regards,
    Pat

    Hello Nagarajan,
    Thanks for the response. I have realised that the Approve/Reject buttons should not be used with PORs.  I am still a little unsure as to how it is supposed to work though. Take the scenario below:
    A buyer orders a quantity of 10
    The vendor responds with a quantity of 7 which is outside the tolerances and goes to approval
    If the buyer does not accept the response but wants to request 10 again what should they do?
    1) If they copy the POR to their PO a changed PO is sent to the Vendor with a quantity of 7.
    2) If they copy the PO to the POR but untick the header and item levels in the POR, the SUS PO remains in a status of Confirmed so the vendor will ship the goods. 
    Which options above is most suitable when the Buyer wants to request the 10 again? Option 2 and then to manually change the PO to a quantity of 10?
    Regards
    Pat

  • Approve and reject button not appearing in the POrtal screen

    Hi All ,
    I have an issue where i create a meeting rwquets and then it goes for approval to the manager , but in this case the manager is not able to see the approve and reject button in the screen , whereas it appears in the back end , please suggest what setting are to be in place to appear those two buttons to click on .

    Hi,
    Then you will have to modify the standard UWL configuration file.
    If your task looks like a standard task (maybe you copied a standard task and modified it slightly), you have to find the ItemType corresponding to the standard task in the UWL configuration file then copy this ItemType and adjust it for you custom task. Please take a look at my last post in another thread : Re: UWL - how to approve purchase requisitions
    If your task is 100% custom then you'll have to find out what is behind the Approve and Reject buttons in the Business Workflow and modify the UWL configuration file accordingly. For instance if a function module is used to approve or reject the request you can define your approve and reject actions using the FunctionModuleActionHandler. You can find more information in the documentation : [Task Launch Customization|http://help.sap.com/saphelp_nw70/helpdata/en/36/dd4ad73c86412e81e9ce66eeb147e7/frameset.htm].
    Regards,
    Pierre

  • I am trying to retrieve folders- they do not appear in Thunderbird, but are on the hard drive.

    1. I have used Thunderbird for 5 years or so, using at least 3 mail addresses at a time. I stow useful mails in folders and subfolders for reference. I regularly use Mozbackup.
    2. Recently I found that one of the main folders was missing, a search of the hard drive revealed that the.msf folders are there, but I dont know how to restore them.
    3. In an effort to retrieve them from a Mozbackup file, i found that email addresses 1,2 and 3 were available.
    This was not useful as email addresses 2 and 3 had been replaced by email addresses 4 and 5 3 years ago. (Mozbackup issue)
    4. Thus I now have only folders from email 1 and all other from emails 4 and 5 have gone.
    Would be grateful for any help
    Graham, Cape Town, South Africa

    re: 2.'' Recently I found that one of the main folders was missing, a search of the hard drive revealed that the.msf folders are there, but I dont know how to restore them.''
    *.msf files are indexing files. They do not contain emails.
    If there is eg:
    Inbox file with no extension is an mbox file; this is the file with emails.
    Inbox.msf is the indexing file. Does not contain emails.
    If you have imap mail account, then you would need to synchronise a subscribed folder to get a copy into your thunderbird Profile. Then it will create an mbox file.
    If the Folder was only a subscribed folder, but not synchronised, then there will not be any emails stored in your profile folder.
    Subscribed foldres only download headers and when you select to view an email, a copy of the folder or xx emails if that option is selected, is downloaded to a temporary folder which is used to get quicker access to emails. These emails are not stored in your profile, they are stored on the server.
    So, please tell us what you use.
    re: mail accounts 1, 4 and 5
    Are the mail accounts IMAP or Pop?
    If mail account 4 and 5 were IMAP mail accounts, then these emails will be stored on the server.
    So create new IMAP mail account and you should see all emails on the server.

  • Batch not appearing in MMBE but determined in the DELIVERY

    Dear All,
    While creating delivery, batch got determined, but actually batch not shown in MMBE.
    When I checked in MSC3N, it shows that particular Batch, it has been created about 2 years back.
    But how system is taking this Batch when there is no stock and it is not shown in MMBE.
    Please explain.
    Regards,
    Mullairaja

    Hi Harry,
    Thanks for your suggestion.
    I will check and confirm you.
    Regards,
    Mullairaja

  • Approval/reject buttons disabled

    Hello,
    I am running SRM 5.0 Extended Classic.
    I have a problem with approval of contracts. I have created a contract, released it and the workflow sends it to a user with approval rights. The contract can be seen in the approval inbox of this user where it says "approve contract xx" but the approve and reject buttons are grey and cannot be used.
    The document is complete and in the workflow preview, I can see that it is waiting for approval. The user is correct
    Any ideas why this happens?
    rgds
    GAR

    Hi,
    See the foll related threads:
    Approve reject button is disabled
    Re: Approve Reject button in Item level is disable
    Also see the foll notes:
    Note 967429 - Approval buttons not updated after release
    Note 1074724 - WS14000148:Button "Return to approver" does not work
    Note 1019390 - Contract APPROVE/REJECT button displayed even after approval
    BR,
    Disha.
    Pls reward points for useful answers.

  • Approval/Rejection of Access Request through email functionality not workin

    Hello Gurus,
    We have configured CUP with workflow and everything is working fine along with email notification triggers etc..
    In MSMP configuration , for task settings i have we see that there are various option and check boxes with options
    1)Approval by email
    2) Rejection by email !!
    Which i have ticked very happily but when i get a notification regarding approval . it is plain text e.g)
    Dear Approver,
    There are new workitem(s) in your work inbox . Please perform the necessary actions.
    Kind regards,
    Access Control Administrator
    Now i am wondering how can i get the approve & reject button in the email ??
    I suppose this functionality was available in GRC 5.3.
    Please correct me if i have understood this functionality wrong or something !!
    Else what settings have to be done to enable it ??
    Thanks in advance.
    Regards,
    Victor

    Hello Diego,
    Thank you for providing me a very good document.
    I checked it and i found that i had selected "default" templates for notification events
    END_OF_REQUEST & REQUEST_SUBMISSION.
    But when i went on to one more template  ID  of "GRAC_AR_APP_BY_EMAIL" i only found that i could select
    recipients (Agent Names)
    Current Approvers
    Manager Notifications
    Other Approvers
    Requester
    User
    I could not find a way through which i could select the "Custom" Agents i have created whose "Agent Purpose" was "APPROVE"
    If i am not wrong , should i add those Custom agents under step three (Maintain Agents) & assign them Agent purpose as "Notification" only then will i be able to see them ??
    Please correct me if i am wrong !!
    Thanks in advance.
    Regards,
    Victor

  • Approver not able to go detail screen to see approve / reject buttons

    Hello friends,
         Approver can see the corresponding workitem in his approval inbox. When click on the approval workitem next screen where approve / reject button with item detail screen is not coming. explorer is refreshing and approver workitem screen will appear again. I am in SRM 5.5 Server and SP13. please let me know if any one face this problem.
    with Regards,
    John.

    Hi,
    Please go to following SPRO node and maintain the settings as below.
    SPRO>SRM>Cross application basic settings>sap business workflow>define Dynamic columns for integarted inbox.
    Maintain the EC_Decision as well second attribute  ec_mail for below tasks.
    TS10008126
    TS10008127
    Then it should work.
    thanks
    Ravi

  • Approve/Reject buttons in UWL workitems

    Hello,
    We are on EP7.01 SP 7 implementing ESS/MSS. We configured UWL Connector under System Admin.-> UWL Config. to pull workitems from R/3 Inbox.
    The workitems are coming fine for 'Travel and Expense' , but there are no Approve/Reject buttons there for the Manager to Approve or Reject the Travel Request.
    Please help as to why this is happening.
    Any help would be highly appreciated.
    Thanks.

    Hi,
    Did you apply 1133821?  95% of the time this will resolve the issue with the buttons.  If you are still experiencing the issue after applying this note, please also check the following:
    - Check that after applying Note 1133821 the destination names and the
    UWL connector names exactly match, even considering case-sensitiveness.
    If your portal system alias (=UWL connector name) is for example
    XYZCLNT100, then the rfc destination name should be exactly
    XYZCLNT100$WebFlowConnector. Please correct the rfc destination
    accordingly.
    - After you have checked/prepared the RFC destination for the future use
    please delete that connector in the UWL config UI (Portal->System
    Administration->System Configuration->Universal Worklist) with which you
    would like to use this RFC destination.
    After that
    - restart the portal cluster
    - recreate and reregister connector
    Now retest.  Are you still seeing the issue?
    Beth Maben
    EP - Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    Please see the UWL Wiki @
    http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Approve - reject buttons disappeared

    Hi
    We have a custom approval workflow. Today, one of the notifications (which is supposed to have approve and reject buttons) did appear without the buttons on the recipient's task list. However, on workflow admin, the approve result type is visible on the diagram.
    What can be the cause of the buttons disappearing? There is no change in the workflow.
    Thanks

    Hi,
    Did you apply 1133821?  95% of the time this will resolve the issue with the buttons.  If you are still experiencing the issue after applying this note, please also check the following:
    - Check that after applying Note 1133821 the destination names and the
    UWL connector names exactly match, even considering case-sensitiveness.
    If your portal system alias (=UWL connector name) is for example
    XYZCLNT100, then the rfc destination name should be exactly
    XYZCLNT100$WebFlowConnector. Please correct the rfc destination
    accordingly.
    - After you have checked/prepared the RFC destination for the future use
    please delete that connector in the UWL config UI (Portal->System
    Administration->System Configuration->Universal Worklist) with which you
    would like to use this RFC destination.
    After that
    - restart the portal cluster
    - recreate and reregister connector
    Now retest.  Are you still seeing the issue?
    Beth Maben
    EP - Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    Please see the UWL Wiki @
    http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Problem with Approve & Reject buttons text

    Hi Team,
    Once we have configured UWL in EP 7.0 & backed is SRM 7.0, facing problem in Approve & Reject Buttons text.
    Instead of showing Approve & Reject text on Buttons, it showing text like this  com.sap.pct.srm.core.action.oldwfl.approve  & com.sap.pct.srm.core.action.oldwfl.reject
    Can you please help me on this?
    Thanks in advance.
    Thanks & Regards
    Sandeep.

    Sergio, Thanks for your reply.
    It's happening for all the task items. Pls find out XML file here. here i pasted some of the code from my XML, because it is not taking full XML code here.
          <Action name="com.sap.pct.srm.core.action.oldwfl.approve" groupAction="" handler="FunctionModuleActionHandler" referenceBundle="com.sap.pct.srm.core.approve" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
          <Properties>
            <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
            <Property name="IV_DECISION" value="APPROVED"/>
            <Property name="IV_APF_VERSION" value="0500"/>
            <Property name="IV_WIID" value="${item.externalId}"/>
            <Property name="IV_MODE" value="APPROVAL"/>
            <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
            <Property name="display_order_priority" value="50"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.srm.core.action.launchWD.conf.detail" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
          <Properties>
            <Property name="Operation" value="detail"/>
            <Property name="ObjectValue" value="a=b&amp;sapsrm_botype=${item.BOTYPE}&amp;sapsrm_boid=${item.BOID}&amp;System=${item.systemId}&amp;sapsrm_wiid=${item.externalId}&amp;sapsrm_mode=${item.BOMODE}&amp;sapsrm_portalbaseurl=&lt;Portal.BaseURL>&amp;sapsrm_pcdlocation=&lt;IView.ID>"/>
            <Property name="ObjectName" value="conf"/>
            <Property name="System" value="SAP_SRM"/>
            <Property name="display_order_priority" value="30"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.srm.core.action.launchWD.oldwfl.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
          <Properties>
            <Property name="Operation" value="detail"/>
            <Property name="ObjectValue" value="a=b&amp;sapsrm_botype=BUS2203&amp;System=${item.systemId}&amp;sapsrm_wiid=${item.externalId}&amp;sapsrm_mode=DISPLAY&amp;sapsrm_portalbaseurl=&lt;Portal.BaseURL>&amp;sapsrm_pcdlocation=&lt;IView.ID>"/>
            <Property name="ObjectName" value="conf"/>
            <Property name="System" value="SAP_SRM"/>
            <Property name="display_order_priority" value="30"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.srm.core.action.launchWD.OldWFL" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
          <Properties>
            <Property name="Operation" value="oldwfl"/>
            <Property name="ObjectValue" value="a=b&amp;System=${item.systemId}&amp;sapsrm_wiid=${item.externalId}&amp;sapsrm_portalbaseurl=&lt;Portal.BaseURL>&amp;sapsrm_pcdlocation=&lt;IView.ID>"/>
            <Property name="ObjectName" value="uwl"/>
            <Property name="System" value="SAP_SRM"/>
            <Property name="display_order_priority" value="30"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.srm.core.action.launchWD.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
          <Properties>
            <Property name="Operation" value="detail"/>
            <Property name="ObjectValue" value="a=b&amp;sapsrm_botype=${item.BOTYPE}&amp;sapsrm_boid=${item.BOID}&amp;System=${item.systemId}&amp;sapsrm_wiid=${item.externalId}&amp;sapsrm_mode=DISPLAY&amp;sapsrm_portalbaseurl=&lt;Portal.BaseURL>&amp;sapsrm_pcdlocation=&lt;IView.ID>"/>
            <Property name="ObjectName" value="conf"/>
            <Property name="System" value="SAP_SRM"/>
            <Property name="display_order_priority" value="30"/>
          </Properties>
        </Action>
    Thanks & Regards
    Sandeep.

  • Buttons not appearing clearly upon output

    I have created menu buttons (with highlight) that in turn link to the relevant movie file.
    When outputted to DVD these buttons appear blurry and unclear.
    Why are the buttons not appearing in a crisp, clean state when I have outputted them?

    Which version of DVD SP are you using? Are you
    making these over video menus? What size and color
    of fonts/background? They can all play into what is
    happening, usually 20pt + sans serif works best, but
    the text in DVD SP can often leave things to be
    desired from time to time - where are you previewing
    the buttons?
    Thanks for your reply.
    The vesrion Im using is DV Studio Pro 3. The up state color of the buttons are black and over is red. The font size is 13pt Arial Black.
    I have outputted the DVD itself, so I view it through TV.
    Am I on the right track?
    Thanks again.

  • I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

    I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Direct Approval/Rejection buttons bid invitation

    Hi,
    The Direct Approval/Rejection buttons are disabbled while approving Bid in users Approval inbox.
    Actually I have activated wf 14500026, and the wf is only activated manually for the creator.
    I have added in tcode SWL1, tasks
    TS79007914
    TS79007919
    TS79007920
    and maintained the entry for Attributes EC_DECISION.
    however, buttons still disabled.
    Many thanks!!
    Patricia

    Hi,
    This is not my solution.
    Let me explain clearly
    1. After SC created, Buyer will add Bidders.
    2. Click on approval preview.
    3. It will be showing one concerned approver for Ex: ( MGR1)
    4. A mail will be sending to MGR1.
    5. After that MGR1 should log in and clicked on " approve all items " button.
    6. In the next screen it is asking final confirmation with YES/NO buttons.
    Here my requirement is " I need to be displayed a text above these buttons(YES/NO) ".
      So, Where do i need to do that, I mean where it is maintianing.
    Please do the needful...!
    I will be very much grateful to you..!
    Regards,
    Chandu

Maybe you are looking for

  • Fetches more values into one variable

    Hi, inside a cursor loop I'd like to assign, each fetch, a value to a variable, in order, at the end to have a collection of all the values fetched into the same variable. The code is the following: CREATE OR REPLACE procedure APPS.AAA as v_pino varc

  • Username getting disabled in Deployment Manager

    Hi, We are using OWB9.2 , when I am trying to deploy the mappings for different environments, I need to change the source location and target location, but in Deployment manager it is not allowing me to change the source location, but where as able t

  • Financial Reports - Rows

    Hi In a report there are 2 DIM's in Rows ....In 1st DIM i want Level 2 members in Col1 & Level 0 members in Col2 & 2nd DIM level2 members in Col3.. How can i get it. COL1 COL2 COL3 DIM1_Level2 DIM1_level0 DIM2_Level2 How can i get it Thanks

  • Use of BApi

    Wat is the use of bapi .in sap... thx. regurds . nainesh.

  • Missing "init.ora" file

    I search lots of website to find out how to create batabase by manual without using OBCA. Almost of the website said that I need to find the "init.ora" file, then copy and edit some of the parameters. But the problem is I couldn't find "init.ora" fil