Approver specfication section not displayed after system upgraded to EHP6

Hello,
We have just upgraded our eRecruiting development environment to EHP6 from EHP3. However, as a manager who creates the requisition and subsequently the job posting, there should be a place that allows the manager to specify the approver for this requisitiion. This is not displayed in the upgraded version. I have checked our authorization setup to ensure the manager does not have too wide an access that will bypass this approval specification process, and everything is in order.
I am wondering if anyone else has run into the same problem.
Thank you.

Hello Alex,
you are probably aware the huge changes in the eRec application when moving from EhP3 to EhP 4 or any higher enhancement package. The whole user interface for non-candidate roles is completely replaced. This includes the manager as well as the recruiter and the recruiting administrator.
In principle it should be possible to run the old BSP applications as long as you do not activate any business functions for the enhancement packages (aka "pure technical upgrade"). But when I did such a pure technical upgrade from EhP 3 to EhP 4 for a customer about 4 years ago we already faced several serious issues with running the old ui and functions. So what you experience are very likely such issues as well.
Kind Regards
Roman

Similar Messages

Multiple selection in the ALV is not possible after system upgrade

Hi Colleague,
I had been using an ALV, which was performing as desired before, but recently we had a system upgrade to NW7.0 and after that in this ALV multiple selection of records/rows is not allowed.
The colleagues who upgraded the system suggested that this may be because this ALV is instantiated at many places. I would request you to kindly provide a solution for the same ASAP, as I am not able to proceede ahead.
Warm regards,
Roopesh

Hi all,
Thanks for your replies, I had figured out the actual problem. The reason was, the referance of the selected rows was lost as I was doing bind elements to the context after moving to wddomodify.
So I figured out an alternative solution to avoid binding on selection of records.
Best regards,
Roopesh
Edited by: Roopesh Dolle on Apr 14, 2011 7:04 AM
Edited by: Roopesh Dolle on Apr 14, 2011 7:05 AM

Additinal tab B in sales Order header not displayed after EHP5 upgrade

Hello Everyone,
                          I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
      We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote 170183.
Now the question is how can I restore the existing functionality?
PROCESS BEFORE OUTPUT.
Verarbeitung vor der Ausgabe
Kopfdaten vorbereiten
MODULE VBAK_BEARBEITEN_VOR.
PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
PROCESS AFTER INPUT.
Verarbeitung nach der Eingabe
PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309.                                                             <----This statement fails
Alle Felder in der Bearbeiten-Kette
MODULE VBAK_BEARBEITEN.
Please advice.
Regards
Abhishek

Hi
Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
Regards
Eduardo

Old pictures can not display after Itunes upgrade

Earlier today I updated to the newest version of Itunes. I also added some new pictures to my synched directory for pictures (this directory has approx 725 pics that were all on my phone prior to this update of Itunes).
When I synched to add the new pictures I got a message saying "some pictures could not be synched because they can not be displayed on the phone". Only 200+ of the pictures were transfered and the rest are not there.
Again all of these pictures were on teh phone before so I am not sure why they can not be displayed now. I have tried re-synching and that did not help.
Any thoughts?

I am also having this problem. I have a 160gb classic that I bought last fall. I have a work computer I've used for my iTunes synch base due to broadband access. The system had worked well enough with 64 bit XP and a few registration tweaks to calm itunes about working in that old environment. Forward to 2 weeks ago - I copy my library to the network drive so that IT can scrub the computer and upgrade me to Win 7. Computer is back up, install the newest version if iTunes, seems to come up fine. Several rounds of re-importing the library after it kept entering all the songs twice. Go to re-synch the ipod - get the 'this is a new device, erase *EVERYTHING* and re-synch. Yep yep. Sits there for nearly two hours saying it's re-uploading stuff. Then on the way home, I see - hey, a ton of stuff isn't there, lots of missing podcasts. Go check, everything is checked, new stuff downloaded, can listen to it on the PC with headphones. Then go synch the iPod - get the same 'things are updating..... synch finished'. And nothing has up- or down-loaded. Tried unchecking stuff, nada. Import new stuff, nada. Nothing Plus it looks like pretty much every CD i ripped into itunes for the past 4-5 months failed to move - maybe iTunes was saving it somewhere else than the My Music folder. PITA-factor of that aside, I'd really like to get at the last 3-4 weeks of podcasts. Any help on getting the system to actually do a real sy
My other changes in the last few weeks are getting a new iPhone to replace an old non-iPhone, so there is another devicee on the account. I don't see my iPod listed amongst my devices in the iTunes store - not sure if that's only for wireless stuff.
Help!!

Main viewer window not displaying after Yosemite upgrade

I just upgraded tp Yosemite. Also upgraded Aperture (v3.6). Opened up Aperture. After it finished upgrading my library I noted that thumbnail images on viewer display OK but there is no image showing on the large viewer. Tried selecting different thumbnails. No success. Tried quitting and restart app. Nothing. Any ideas?

Thanks. I tried all three of the repair options but no success. However, after restart things started working correctly. Possibly it was the combination of repairs and restart that fixed it.

Photoshop CS4 will not open after system upgrade to Mac OSX Yosemite

I recently upgraded to Mac OSX Yosemite and unfortunately, my Photoshop CS4 will not open. The message says it requires Java SE6. I now have Java 7 update 71. I would appreciate suggestions from anyone who can help to resolve this problem. Thank you.

Thank you very much, Chris Cox. I followed the link in the error message to Apple's support page, downloaded and installed the Java for Mac OSX.
I can now open my PS CS4 again. What a relief!
Many thanks for your fast response and accurate advice.
Cheers!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Notes problem after Mavericks upgrade

Notes will not sync after Mavericks upgrade, other apps - mail & contacts & calendar do sync

First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Approver specfication section not displayed after system upgraded to EHP6

Similar Messages

Maybe you are looking for