Apps Database Upgrade checking

Hi Friends,
Today upgraded the 11.5.10.2 database to 10g. how to check the this database is successfully upgraded or not......I did not find any errors while upgradation.......
please share your experience

Run the following query, make sure all components are valid:
SQL> select COMP_NAME, VERSION, STATUS
from DBA_REGISTRY;Do not forget to compile all invalid objects once you are done with the upgrade.

Similar Messages

Database Upgrade Pre checks

I am planning to upgrade a database from 11.2.0.2 to 11.2.0.4 version. I ran the pre upgrade checks utlu112i script and got the below warning.
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APEX_030200 has dependent objects.
Could you please suggest how to handle this warning. Is there any oracle doc for this?

OWNER                NAME                      TYPE               REFERENCED_OWNER     REFERENCED_NAME      REFERENCED_TYPE      REFERENCED_LINK_NAME DEPE
APEX_030200          UTL_HTTP                  SYNONYM            SYS                  UTL_HTTP             PACKAGE                                   HARD
APEX_030200          UTL_SMTP                  SYNONYM            SYS                  UTL_SMTP             PACKAGE                                   HARD
APEX_030200          WWV_FLOW_LDAP             PACKAGE            PUBLIC               DBMS_LDAP            SYNONYM                                   HARD
APEX_030200          WWV_FLOW_LDAP             PACKAGE BODY       PUBLIC               DBMS_LDAP            SYNONYM                                   HARD
APEX_030200          WWV_FLOW_CUSTOM_AUTH_LDAP PACKAGE BODY       PUBLIC               DBMS_LDAP            SYNONYM                                   HARD
MDSYS                SDO_OLS                   PACKAGE BODY       PUBLIC               UTL_HTTP             SYNONYM                                   HARD
ORACLE_OCM           MGMT_DB_LL_METRICS        PACKAGE BODY       PUBLIC               UTL_INADDR           SYNONYM                                   HARD
APEX_030200          WWV_FLOW_DISP_PAGE_PLUGS PACKAGE BODY       APEX_030200          UTL_HTTP             SYNONYM                                   HARD
APEX_030200          WWV_FLOW_WEB_SERVICES     PACKAGE BODY       APEX_030200          UTL_HTTP             SYNONYM                                   HARD
APEX_030200          WWV_FLOW_PRINT_UTIL       PACKAGE BODY       APEX_030200          UTL_HTTP             SYNONYM                                   HARD
APEX_030200          WWV_FLOW_HELP             PACKAGE BODY       APEX_030200          UTL_HTTP             SYNONYM                                   HARD
OWNER                NAME                      TYPE               REFERENCED_OWNER     REFERENCED_NAME      REFERENCED_TYPE      REFERENCED_LINK_NAME DEPE
APEX_030200          WWV_FLOW_MAIL             PACKAGE BODY       APEX_030200          UTL_SMTP             SYNONYM                                   HARD

Check Writer Hangs after 10G database upgrade

Hi Gurus,
Can anybody let me know how i can trace check writer concurrent process.
It seems to hang after we upgraded the database to 10g version.
Thanks,
S.

The log file shows
/u31/oracle/fimsprodappl/pay/11.5.0/bin/PYUGEN
Program was terminated by signal 11
Should i do some thing with PYUGEN (rebuild/relink) after 10G database upgrade.
We are on HP-UX 11 (PA-RISC) 64 bit.
S

Testing while doing the database upgrade from 9.2.0.6 to 11.2.0.2 apps ?

Dear Experts,
Please note that we are in process of doing database upgrade from 9.2.0.6 to 11.2.0.2 ?
We have gone through the interoperablity note id for 11i 11gr2 ?
Step 1
upgrading the database from 9.2.0.6 to 9.2.0.8 ?
Step 2-
Upgrading the Forms patchset to 19 ?
Step-3
Applying the Rollup-6 patch ?
Step -4
Upgrading the database from 9.2.0.8 to 11.2.0.2 ?
We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?
Please advise.
Regards
Mohammed.

We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?There is no such a list. However, you can refer to the documents referenced in each task above and it should cover if any testing need to be done or not (for example, the Developer Patchset doc). For the rest of the docs you will have to do your regular testing (test the application/database and make sure it is working properly).
Also, make sure you review (Known issues on Top of 11i.ATG_PF.H. delta.6 (RUP6) - 5903765 [ID 459353.1]).
ATG RUP 7 is the latest 11i.ATG_PF patch.
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631 [ID 858801.1]
Thanks,
Hussein

Database Upgrade from 10.2.0.3.0 to 10.2.0.4.0 for a EBS 12 database

Hi,
Is there any specific procedure like interoperability for upgrading an R12 database from 10.2.0.3.0 to 10.2.0.4.0.
Currently I have plans to upgrade database from 10.2.0.3.0 to 10.2.0.4.0 and then
upgrade apps from 12.0.4 to 12.0.6. Also I need to install Arabic language on the instance.
What would be the best sequence to do this ?
Ram

hi,
you can use the oracle 10.2.0.4 patchset(downloadable from metalink) to upgrade your database to this version,
just follow the OUI in the patch set and select the migrating oracle home ...
before migrating it will ask you to stop all the oracle services , once it migrated then you need to use DBUA (DATABASE upgrade assistant ) to upgrade its components ..
then you can check all the component versions vis
select * from dba_registry;
Regards,
Mohd Mehraj Hussain
http://mehrajdba.wordpress.com

Database upgrade in r11

Hi,
I have 11.5.10.2 on linux. My database version is 9.2.0.8. How can I make my database 10g, is it safe to upgrade database? I can have any issue in future?

Hi user;
Thanks Helios for help,I am newbie on apps database. After 10.2.0.1 upgrade I can upgrade 10.2.0.3 ? Is it safe?If i can help its makes me happy. You can upgrade your database to 10.2.0.3 but if you dont have specific reason i suggest upgrade database to 10.2.0.4
You have to donwload 10.2.0.4 patch from metalink. Please check : Patch 6810189 -- 10.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
And also check:
Intro to Patch Set Updates (PSU) [ID 854428.1]
If you are making this upgrade process first time please read doc first then be sure you have valid database backup (rman+cold) then try to make upgrade first on test instance than do it on production
Upgrade process totaly safe
Regard
Helios

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

Database Upgradation from oracle 9.2.0.8 to oracle11gR2

Hi
we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2
i am having some doubt from below pre-upgrade scripts out put.
oratst@ebsdevdb on /tmp # sqlplus "/as sysdba"
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Jul 4 10:11:48 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> spool 11202_upgrade.txt
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 07-04-2011 10:17:06
Script Version: 11.2.0.2.0 Build: 001
Database:
--> name: EBSTEST
--> version: 9.2.0.8.0
--> compatible: 9.2.0
--> blocksize: 8192
--> timezone file: V1
Logfiles: [make adjustments in the current environment]
--> The existing log files are adequate. No changes are required.
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
--> TOOLS tablespace is adequate for the upgrade.
.... minimum required size: 8 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
--> AR_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 33497 MB
--> FND_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 45447 MB
--> AMVD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> ASOD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> CCTD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> IBUD tablespace is adequate for the upgrade.
.... minimum required size: 1 MB
--> IEMD tablespace is adequate for the upgrade.
.... minimum required size: 5 MB
--> IEOD tablespace is adequate for the upgrade.
.... minimum required size: 4 MB
--> JTFD tablespace is adequate for the upgrade.
.... minimum required size: 135 MB
--> OKCD tablespace is adequate for the upgrade.
.... minimum required size: 34 MB
--> XDPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> XNPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 849 MB
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
WARNING: --> "shared_pool_size" needs to be increased to at least 532 MB
WARNING: --> "java_pool_size" needs to be increased to at least 128 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> optimizer_max_permutations 10.1 OBSOLETE
--> row_locking 10.1 OBSOLETE
--> undo_suppress_errors 10.1 OBSOLETE
--> max_enabled_roles 10.1 DEPRECATED
--> enqueue_resources 10.2 OBSOLETE
--> sql_trace 10.2 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [install]
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 9.2.0.8.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER ADWANIAH has 1 INVALID objects.
.... USER APPS has 34 INVALID objects.
.... USER CHAKKACHANSA has 1 INVALID objects.
.... USER FA_USER has 9 INVALID objects.
.... USER SYSSEL has 2 INVALID objects.
.... USER SYSTEM has 30 INVALID objects.
.... USER XXITDFINAD has 7 INVALID objects.
WARNING: --> SYSTEM schema default tablespace has been altered.
.... The SYSTEM schema default tablespace is currently set to TOOLS.
.... Prior to upgrading your database please reset the
.... SYSTEM schema default tablespace to SYSTEM using the command:
.... ALTER USER SYSTEM DEFAULT TABLESPACE SYSTEM;
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following commands
while connected as SYSDBA:
EXECUTE dbms_stats.gather_schema_stats('CTXSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('DBSNMP',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('MDSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDPLUGINS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDSYS',options=>'GATHER'
estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('OUTLN',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SYSAUX Tablespace:
[Create tablespace in the Oracle Database 11.2 environment]
--> New "SYSAUX" tablespace
.... minimum required size for database upgrade: 500 MB
From above output script
1)SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
From system tablespace minimum required size means free space from system tablespace or total size of system tablespace?
i am going to use dbua utility for upgrade means does it alter tablespace as per output of scripts or we need to manually alter tablespace size as per requirement?
2)WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
what is above warning and how can i configure ACL's for APPS User?
Thanks
With Regards
A-Z

Hi
oratst@ebsdevdb on /ebdbh/11g/data/cfgtoollogs/dbua/ebstest/upgrade1 # more Upgrade_Directive.log
Connected.
ODMA_DIRECTIVE:VERSION:9.2.0.8
ODMA_DIRECTIVE:MIGRATE_SID:
ODMA_DIRECTIVE:ORA:IGNORE:06512:
ODMA_DIRECTIVE:ORA:FATAL:00600:
ODMA_DIRECTIVE:ORA:FATAL:01012:
ODMA_DIRECTIVE:ORA:FATAL:01031:
ODMA_DIRECTIVE:ORA:FATAL:01034:
ODMA_DIRECTIVE:ORA:FATAL:01078:
ODMA_DIRECTIVE:ORA:FATAL:01092:
ODMA_DIRECTIVE:ORA:FATAL:01109:
ODMA_DIRECTIVE:ORA:FATAL:01119:
ODMA_DIRECTIVE:ORA:FATAL:01507:
ODMA_DIRECTIVE:ORA:FATAL:01722:
ODMA_DIRECTIVE:ORA:FATAL:03113:
ODMA_DIRECTIVE:ORA:FATAL:03114:
ODMA_DIRECTIVE:ORA:FATAL:07445:
ODMA_DIRECTIVE:ORA:FATAL:12560:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01650:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01651:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01652:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01653:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01654:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01655:
ODMA_DIRECTIVE:ORA:RECOVER_ROLL:01562:
ODMA_DIRECTIVE:ORA:RECOVER_INIT:04031:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catupgrd.sql:
ODMA_DIRECTIVE:BOUNCE_DATABASE:UPGRADE:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catuppst.sql:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:sqlplus/admin/help/hlpbld.sql helpus.sql:
Thanks
With Regards
A-Z

11.5.10.2 12.1.1 and 10g 11g database upgrade at same time

I have just started an 11.5.10.2 > 12.1.1 upgrade and have created a project in MWIZ 2.15 for it.
I would also like to upgrade the 10.2.0.2 database to 11.1.0.7 as part of the same upgrade and create an MWIZ project for that.
I have a couple of questions that the MWIZ FAQ does not address:
1. At what point in the 11.5.10.2 > 12.1.1 upgrade should I do the database upgrade?
MWIZ has two points when it can be done based on apps/database versions. One is at the end of the 'Prep for Upgrade' category and the other is during the 'Upg to Rel 12.1.1' category. The MWIZ step notes cover upgrading to the latest 10g or 11g patch version but not upgrading from 10g to 11g so I am unsure which category to go for.
2. When I create the database upgrade project which 'Destination Version' should I choose?
The two options are 'RDBMS 11.1 and E-Business Suite 11.5' and 'RDBMS 11.1 and E-Business Suite 12'.
As I haven't upgraded to R12 yet and am still at the pre-upgrade stage should I pick 11.5? Or should I go with R12 because I am upgrading Apps and the database at the same time?
Any help and advice gratefully received.
Thanks

Answer to above question not required now as:
Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps.

Putting apps database in Read-Only mode

Hi,
I want to put the apps database in read-only mode to that user will be able to login into the applications and see data but will not be able to update it.
What is the best way to do this?
Thanks

I am still looking at how to do this because if users
update the UAT/test database, when the prod upgrade
is completed, they will think that their updates will
be available and this will cause some issues.This is a training/expectation-setting issue, not a technical one. You need to make sure that your users understand the difference between a test system and production, and that changes made in testing will not be present in production. They also need to understand that this situation is actually to their benefit: it enables them to really work with the test system to uncover potential problems and learn new features, without fear of making changes that could negatively impact their day-to-day work in production.
Please note that I'm not trying to be a jerk here. I very respectfully submit that attempting to make an instance read-only for training purposes, even if possible, will involve a great deal of technical work for very little (and perhaps even negative) overall benefit to the users.
Regards,
John P.

W_YEAR_D Script to configure Year Data in Apps Database : OBIA

Hi Friends,
We want to configure DAY, MONTH, YEAR... in my Apps database. As of now we have Scripts for W_DAY_D, W_MONTH_D and mentioned below. NOw , we need same kind of scripts for W_YEAR_D. We are planning to bypass Informatica and DAC, So we need to configure them in Apps DAtabase to get the results similar to OBIA.
W_DAY_D
CREATE TABLE W_DAY_D AS
(SELECT
ROWNUM ROW_WID,
CurrDate AS Day_ID,
to_number(to_char(CurrDate, 'YYYYMMDD')) as DAY_ID_YYYYMMDD,
--1 AS Day_Time_Span,
--CurrDate AS Day_End_Date,
TO_CHAR(CurrDate,'Day') AS Week_Day_Full,
TO_CHAR(CurrDate,'DY') AS Week_Day_Short,
TO_NUMBER(TRIM(leading '0'
FROM TO_CHAR(CurrDate,'D'))) AS Day_Num_of_Week,
TO_NUMBER(TRIM(leading '0'
FROM TO_CHAR(CurrDate,'DD'))) AS Day_Num_of_Month,
TO_NUMBER(TRIM(leading '0'
FROM TO_CHAR(CurrDate,'DDD'))) AS Day_Num_of_Year,
UPPER(TO_CHAR(CurrDate,'Mon')
|| '-'
|| TO_CHAR(CURRDATE,'YYYY')) AS MONTH_ID,
TO_CHAR(CurrDate,'Mon')
|| '-'
|| TO_CHAR(CURRDATE,'YY') AS MONTH_SHORT_ID,
TO_CHAR(CurrDate,'Mon')
|| ' '
|| TO_CHAR(CurrDate,'YYYY') AS Month_Short_Desc,
RTRIM(TO_CHAR(CurrDate,'Month'))
|| ' '
|| TO_CHAR(CurrDate,'YYYY') AS Month_Long_Desc,
TO_CHAR(CurrDate,'Mon') AS Month_Short,
TO_CHAR(CurrDate,'Month') AS Month_Long,
TO_NUMBER(TRIM(leading '0'
FROM TO_CHAR(CurrDate,'MM'))) AS Month_Num_of_Year,
'Q'
|| UPPER(TO_CHAR(CurrDate,'Q')
|| '-'
|| TO_CHAR(CurrDate,'YYYY')) AS Quarter_ID,
'Q' || UPPER(TO_CHAR(CurrDate,'Q')) AS Quarter_Short,
TO_NUMBER(TO_CHAR(CurrDate,'Q')) AS Quarter_Num_of_Year,
CASE
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 1 THEN 1
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 2 THEN 2
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 3 THEN 3
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 4 THEN 1
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 5 THEN 2
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 6 THEN 3
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 7 THEN 1
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 8 THEN 2
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 9 THEN 3
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 10 THEN 1
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 11 THEN 2
WHEN TO_NUMBER(TO_CHAR(CurrDate,'MM')) = 12 THEN 3
END AS Quarter_Num_of_Month,
CASE
WHEN TO_NUMBER(TO_CHAR(CurrDate,'Q')) <= 2
THEN 1
ELSE 2
END AS half_num_of_year,
CASE
WHEN TO_NUMBER(TO_CHAR(CurrDate,'Q')) <= 2
THEN 'H'
|| 1
|| '-'
|| TO_CHAR(CurrDate,'YYYY')
ELSE 'H'
|| 2
|| '-'
|| TO_CHAR(CurrDate,'YYYY')
END AS half_of_year_id,
TO_CHAR(CurrDate,'YYYY') AS Year_ID
FROM
(SELECT level n,
-- Calendar starts at the day after this date.
TO_DATE('31/12/2000','DD/MM/YYYY') + NUMTODSINTERVAL(level,'DAY') CurrDate
FROM dual
-- Change for the number of days to be added to the table.
CONNECT BY level <= 9131
W_MONTH_D
CREATE TABLE W_MONTH_D
AS
SELECT ROWNUM AS ROW_WID,
B.MONTH_ID AS MONTH_ID,
B.MONTH_SHORT_DESC,B.MONTH_LONG_DESC,B.MONTH_SHORT,B.MONTH_LONG,B.MONTH_NUM_OF_YEAR,B.QUARTER_ID,B.QUARTER_SHORT,B.QUARTER_NUM_OF_YEAR,
B.QUARTER_NUM_OF_MONTH,B.HALF_NUM_OF_YEAR,B.HALF_OF_YEAR_ID,B.YEAR_ID
FROM
(SELECT MONTH_ID,MONTH_SHORT_DESC,MONTH_LONG_DESC,MONTH_SHORT,MONTH_LONG,MONTH_NUM_OF_YEAR,QUARTER_ID,QUARTER_SHORT,QUARTER_NUM_OF_YEAR,
QUARTER_NUM_OF_MONTH,HALF_NUM_OF_YEAR,HALF_OF_YEAR_ID,YEAR_ID FROM W_DAY_D
GROUP BY MONTH_ID,MONTH_SHORT_DESC,MONTH_LONG_DESC,MONTH_SHORT,MONTH_LONG,MONTH_NUM_OF_YEAR,QUARTER_ID,QUARTER_SHORT,QUARTER_NUM_OF_YEAR,
QUARTER_NUM_OF_MONTH,HALF_NUM_OF_YEAR,HALF_OF_YEAR_ID,YEAR_ID
ORDER BY YEAR_ID,MONTH_NUM_OF_YEAR) B
Please help on this asap. Its really urgent requirement..
Thanks in Advance.
Raghu Nagadasari

messDate.setGregorianChange(theResult..getDate(2)); //I GET ABSOLUTELY NO DATE HERE
This doesn't do what you think it does. Check the API documentation.
http://java.sun.com/j2se/1.4.1/docs/api/java/util/GregorianCalendar.html
Try this instead:
messDate.setTime(theResult.getDate(2));

Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

Hi all,
I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
"Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
We have completed upto
6. Install Oracle Database 11g Products from the 11g Examples CD
but not "3.Update application tier context file with new database listener port number (conditional) "
as it was conditional
Old home:-F:\oracle\PROD\db\tech_st\11.1.0
New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_BASE=F:\app\mocppd
set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
perl cr9idata.pl
Got error on
"7.Create nls/data/9idata directory" as
perl cr9idata.pl
F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
cygwin warning:
MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
in starting of the path
Thanks
Nawneet

but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
Thanks,
Hussein

Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9

I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
Any ideas?
Thanks in advance!
Brown.Recluse

Ok, weird, strange...did ONE more restart and now its working fine...who knows?
Me

XML Database in Apps Databases

Hi,
What is the use of XML database in Apps Databases...it has XML Schema...etc etc..what purpose is that...

If you are using XMLTYPE in stored procedures,
views, functions, columns or tables you need the XDB
feature in order for the base XMLTYPE to have
complete functionality of it's member functions.
This means if you were directed to remove XDB for
some other reason you must follow the steps to put
it back in if you want to use the XMLTYPE. You will
also require it if you are using any of the standard
pl/sql apis such as DBMS_XMLDOM and DBMS_XMLQUERY
to name a couple.Yes, this is from the first note. If you check the other one, you would also find that Oracle XML Database has to be installed correctly (Oracle 10g Release 2 and above) in order to have a successful interMedia installation. For getting more details about "Oracle interMedia", check the the same note (Question 1).

Apps Database Upgrade checking

Similar Messages

Maybe you are looking for