Apps not getting installed

i hv ipod touch gen 2, software version: 2.2.1, i checked updates, it hv the latest version of software...
bt while installing every app i get "install the newer version of ipod touch software" or "not compatible for this ipod touch software version"
what to do?
Message was edited by: apoorvawinx

Do you have the latest version of iTunes, 10.X?
Are you sure you have a 2G iPod? See the following for identifying your model:
http://support.apple.com/kb/HT1353
If you have 1G you can update to 3.1 by following this link. You can go any higher with a 1G.
http://support.apple.com/kb/HT2052

Similar Messages

  • What happens to the apps' data, if they were restored to a new device, but apps never get installed?

    This is a super easy scanario. 
    Say in my old phone I have totally 50 apps, 30 purchased under Appel ID (A), and another 20 purchased under a different Apple ID, (B).
    The old device is iOS5 and I turned on iCloud backup and back up everything (data of all apps).
    I get a new device, restore from iCloud, wait until everything (photo, messages, settings, most importantly, data of all 50 apps) are restoed to the new phone.
    The first thing happen after the first reboot, and it will prompt me to log on my Apple ID, to install apps.
    What if, at this moment I decied to only sign on with Apple ID (A), and just don't want to use all 20 apps that I purchased under Apple ID (B) anymore?
    Is the data of those 20 apps become leftover /  orphane on my new phone, and just no way to clean them up?  Please notice again, that I did not say "install app and then delete", I know that will clean up the data as well. I mean when data is copied over but app never get installed.

    Game settings and other data is part of the backup:
    iTunes: About iOS backups
    A manual backup before you sync for the first time will save your content to the new PC.
    Follow this user tip by wjosten to save your data and settings to a new PC:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    or this one by turningtest2:
    Recovering your iTunes library from your iPod or iOS device

  • Custom Afaria Client not getting installed on IOS devices

    Hello,
    I am using Afaria SP4 in my organization with no hotfix applied
    I have created a custom Afaria Client App for IOS devices.
    I am succesfully able to enroll my IOS devices and install the custom app during enrollment,when i am trying to hit the system tenant.
    However,when i am trying to hit manually created tenants,enrollment is
    done and also the device is under MDM control,but custom Afaria client app is not getting installed during enrollment.
    I have attached the screenshot of the page where i have uploaded the ios afaria application in Afaria console.
    The error that i can see in the icu logs while enrolling ios device in manually created tenant is as follows-
    "The manifest for the app at
    http://65.240.141.130:23003/ps2/ps.svc/Package/Content/0435A04B083AB0E663FE410BBFE7238D31E6B113/7de2f89d-6cdf-458d-a68c-0bb72e616c68/3/Virt.Def.App.plist
    could not be validated"
    Please guide to resolve the issue.
    thanks and regards,
    Jigar Salecha

    I'm quite sure you need to set this up per tenant. Have you tried to upload the custom client to each tenant ?
    BR
    Peter

  • OKI 5500n driver does not get installed......

    I tried it on Macbook Pro intel and MacPro xenon.
    in os 10.5.3 the printer just stopped working!!!
    When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
    Please help!!!

    I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
    The final procedure that worked was:
    1) Move Library/Printers/Okidata folder to trash and empty trash
    2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
    3) Reboot
    4) Install OSX5C5500E driver
    5) Open System Preferences/Print&Fax
    6) Click + to add a a printer
    7) IGNORE THE OKI PRINTER THAT APPEARS THERE
    8) Select "More Printers"
    9) Under Oki USB, a printer driver will show up - choose that one.
    10) Print - it works now!
    11) Move other printer drivers back into Library/Printers
    12) Enjoy using Okidata printer rather than buying lots of HP ink.

  • Reg: 0PUR_C01 - Update Rule - Not Getting Installed

    Dear friends
    I am trying to activate MM Cube (0PUR_C01)
    But when collecting dependent objects for 0PUR_C01 with data flow before option, Once collection over, system throws the following message
    1.             Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
    2.     Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
    3.     Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'     
    4.     Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'     
    And also, I could able to see the following long text error message.
    1.     You have collected objects in the BI Metadata Repository. Associated objects for object 0PUR_C01 of type InfoCube, CUBE have also been collected. Object 0DB87SIC1 of type InfoObject,IOBJ was among these objects
    2.     However, this object 0DB87SIC1 of type InfoObject,IOBJ is not available in the metadata repository
    3.     If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection.
    I tried to install those collected objects, the cube alone gets installed and visible in workbench. Update Rules are not getting installed. Even after,I have collected the update rule separately and tried to install lot of times, no luck for me
    eventhough the job has been successful
    If anybody came across this type errors, Please guide me to solve that
    Points will be awarded for the right answers.
    Regards
    Raju Saravanan

    hi raju
    1. Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
    2. Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
    3. Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
    4. Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'
    u just ignore this errors and install. this wont affect.
    u just try again colllecting the cube and collect it "befroe and after"
    u wld get the update rules for the following datasources
    2LIS_02_ITM
    2LIS_02_S012
    2LIS_02_SCL
    Regards
    Dina

  • Update rules not getting installed from business content.

    Hello,
    One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
    So i dont know how to get these update rules working.
    Please advice,
    Thanks

    Hi Mukund,
    please see also the answer that I provided to your thread
    <a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
    In addtion, you might want to check
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
    and the online documentation for more general information about data modeling / acquisition.
       Cheers
          SAP NetWeaver 2004s Ramp-Up BI Back Office Team

  • Can dld newer versions of Frfx but they are not getting installed?

    I am able to dld newer versions of firefox but they are not getting installed ... Currently 'about firefox' shows my version to be 27.0.1 but when I go into the troubleshooting option it shows I have version 28.0 and 29.0 in my update history. Please advise. Thanks

    Hi Irishman,
    Have a go at the suggestions that follow and then post back with how you get on.
    Obviously I have seen your post, and sorry you are having problems. Unfortunately this is likely to be because you did not take enough care on the Internet. It is all too easy to go to bad websites and pick up malware that once downloaded does things you may not like or expect.
    <u>Explanation </u><br />
    '''This is not anything to do with Mozilla Firefox''', other than it is the browser in use. Such software is not bundled with or downloaded with Firefox installs or upgrades. <br /> ( You may get an option of thumbnails in otherwise blank spaces in newtabs in a version of Firefox later this year but that is a different subject)
    Finding such adware may be problematic, after all it is either downright malware which will try its best to evade being found and uninstalled, or it is adware that a minority of people actually like and deliberately download and install, usually after clicking small print saying this will happen.
    <u>Suggestions to try to Uninstall or Remove Adware</u>
    First thing to try, check which search engine is selected ? <br /> Because this is so simple and could have an effect it is worth checking what Search engine is selected for the Firefox Searchbar. You may have changed that, or software may have,and that will affect other searches including those from the address bar and the start page. All you need to do is click the little downward pointing arrowhead in the search bar and check what is in use and what is available. In most countries Firefox uses Google by default.
    Check the shortcut Icons - has an address been added ? <br> Right click the icon on the desktop used to start Firefox has an address been tacked on to the end of that. If something has changed that Firefox goes to that address as it starts up. For comparison use a run command directly. In Windows & with Firefox not already open Use keyboard shortcut Winkey+Run then when you get the run option key in ''firefox.exe'' & hit return. That will run Firefox without any extra instruction.
    Adware removal<br />
    I you have got adware, or unwanted software especially if it also affects other browsers (So check the use of Internet Explorer) look for anything unexpected installed in the Windows OS, use the Windows Control Panel. especially if only Firefox is affected check what is installed as extensions and plugins by using the addons manager.
    * USE '''New button -> Addons ''' <br /> Or navigate to ''about:addons'' ,by keying that into the addressbar
    * Also see
    ** [[Remove a toolbar that has taken over your Firefox search or home page]]
    **And this slightly dated article [[What to do when searches take you to the wrong search website]]
    I will make a follow on post detailing malware removal steps. Note it is important to use up to date and multiple tools, not just your one favourite. No single tool detects everything. This one is particularly useful with adware problems
    * * '''[http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]'''

  • Third party audio apps not getting recognized

    Why do most of my third party audio apps not get recognized by the "inter-app audio apps" feature in the new version of Garageband? I have version 3 of the IPad. It only recognizes Galileo (organ app) and not Sunrizer, Sample Tank, etc.

    They are simply not enabled for that yet, maybe they will in the future; just find those who are. I think Audiobus, a 5 dollar app, can connect to more programs, and those too have to support it, but the supported program list is probably longer. Audiobus is very popular

  • Pro*COBOL not getting instaled on Fedora 14

    Hi,
    I have installed Oracle 11gr2 on Fedora 14 x86_64 system,. But the Pro*COBOL pre compiler which automatically comes with Oracle is not getting installed (Instead Proc is available. I dont know why). I have the entire application coded in embeded SQL-COBOL programs. I am stuck here, unable to preprocess my programs.
    Please suggest me the procedure to resolve. Thanks in advance.
    Note: In "Advanced Install" option I could not find "custom instal"l or a provision to select "precompilers" but other DBA related things found
    Venkatesh Kudire
    [email protected]

    David,
    Can you try passing in the 1.5 VM location manually as listed below
    WorkshopInstaller.exe LAX_VM d:\bea\9server\jdk150_04\bin\java.exe
    Can you also make sure that the 1.5 JVM value entry is the first entry in the PATH environment variable.
    cheers
    Raj

  • SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

    Hi,
    Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
    SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
    also it gets installed through sccm when the machine is set to english language, 
    Thank you
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    Hi Friends,
    we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
    i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
    some errors which sccm reports display are 
    11171
    10008
    10021-
    17031 - 
    1602 - User Cancelled installation
    113 - No more internal file identifiers available
    10070 - File handle reference is no longer available
    10050 - A socket operation encountered a dead network
    11170  - The task sequence manager could not successfully complete execution of the task sequence
    i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
    Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
    is there a way to cut short the Task seq and keep it simple ?
    right now its like this 
    1. checking for prerequisite : checks for OS Name and OS version
    2. installs PGP Bootgaurd Bypass
    3. System Restart
    4. Installing Windows 7 Service Pack 1
    5. Final Restart
    6. uninstall PGP Bootgaurd Bypass
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

  • Pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit

    pdf printer is not get installed while installing adobe acrobat  pro 11 in win 7 32 bit

    BlackCat,
    Two things:
    1) Acrobat 8 Pro is not Win 7 compatible, no less Win 7 64-bit copmpatible
    2) Reader X and Acrobat 8 are not a supported combination. Reader X and Acrobat X is the first Windows combination that is supported by Adobe. Reader X and Acrobat 8 will cause problems.
    You are using a brand new 64-bit OS, you need to use an application that is designed to work with it. Acrobat X is the way to go, HOWEVER, there are still growing pains with Acrobat X, Win 7 64-bit, and the latest version of Office.

  • Wireless Lan not getting Installed

    Hi, 

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-ac027tx Notebook and issues with Wireless Lan not getting installed correctly. Here is a listing for the drivers page for your Notebook and Windows 7.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It also has built into it Wireless assistance. Hope this helps. Thanks.

  • Playbook OS 2.00 update - Video Chat not getting Installed in UAE ?

    I Recently bought a playbook and immediately upgraded it to OS 2.0 via wifi. It got successfully upgraded but I am not having the video chat icon. I think this did not get installed with the upgrade. How do I get this installed ? Any idea ?

    Hi tamils_siva
    Due to content restrictions, the BlackBerry® PlayBook™ Video Chat application is not available in the United Arab Emirates.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Wifi driver is not getting installed

    I tried installing all the wifi drivers that are there in the network drivers given in this website for hp dv6 6165-tx .But the drivers are not getting installed.It is showing the message that "the driver could not be installed properly as it is not compatible with the current version of windows".What to do.Plzz help me out..

     I upgraded my G580 (2689)to Windows 8 and had terrible trouble getting the wifi/bluetooth to work. I installed the driver 5.100.245.20 downloaded from Lenovo Support but it would not work at all. I went into the BIOS and reset to defaults and hey presto it began working! Strange really, as I had never been into the BIOS to alter anything. It may not work for everyone but must be worth a try eh?

  • The apps that are downloaded from itunes store are not getting installed pls help

    I am currently using the latest version of itunes. And i am using an iphone 3g ios 4.2.1 version. And whenever i am downloading any of the free application from itunes store from my pc the application is getting download properly and when i try installing it on my phone it gets installed but after installing there is a process of finishing sync when that appears the mark from that application disappears on its own and the app is not installed on the phone.
    Please help me
    Thank you

    Oooft thanks for rapid responce!!  It is same account as purchased app, defo compatible (3 of them used to be on ipod then disappeared)  and this is only computer I've ever used with ipod.  I also did a software update just incase and tried dragging and dropping them into device but it won't let me!!!!!  I will try the restictions thingy!

Maybe you are looking for

  • Problem with call log and email signature.​..

     Hi, I have 2 little problem with my BB First, the day won't appear in the call logs. It only displays the month like 08/dd.  Pic 1 Second, when I send emails, my signature gets all mixed up because of my french punctuation, any idea why ? Pic 2 Mess

  • Inventory data load

    Hi guru, i am new in extracting BI inventory's data. In the process, it is said : " take down time according to the of data"  before initializing stock (using transaction MCNB ) for 2LIS_03_BX data  source. My question : how to take down time  ? Than

  • Building a table with data from a query

    Hello group, Is it possible to build a table with the output from a query. We would like to build queries on precalculated data, and want to use other queries for the precalculation. Regards, Léon Hoeneveld

  • User data permanently saved on iPhone. Even after FULL 2 HOUR WIPE

    Just got my 3G S and I restored my old iPhone 3G prior to selling it. After that I found that all my user data was saved on the phone. When I downloaded Pandora and opened it, my account info was saved and I auto-logged in. I researched and found the

  • Workflow: Auto forward for next level for decision with object (RFQ)

    Hi all, I have the same requirement as the one in this post but for RFQ approval instead of PO Workflow -Auto forward for next level for decision with object (PR) I have tried deadline monitoring, but I need to capture the level in which the RFQ is i