APs being contained as rogues by an external system

A rogue containment policy is being initiated against my organization's APs and I do not have the tools/knowledge necessary to track down its point of origin. What tools or steps are required to identify who is containing an AP?
Thanks

I currently have this weird issue too
I have no idea why. It started yesterday and continued today. I know that some people are in that area playing around with some Zigbee RFID tags, but I don't think that should make a problem?
Here from the controller logfile:
wism-1250-2: *Apr 09 14:40:03.582: %LWAPP-1-AP_CONTAINED: spam_lrad.c:25558 AP 1200b-6106-1 is being contained on slot 0
Containment is after around 1 minute over (WCS sends two mails, one with containment and one with CLEAR). I don't know if the users have some issues because of this, so far only one complained, but that could also be because he's using an Apple and not a stadard client.
The controller logfile doesn't show a "resolve" of the containment.
Auto containment of rogues is disabled on the controller.
Any ideas? Or did you ever receive an answer from your tac case?
Thanks,
Patrick

Similar Messages

Drawbacks of using 4 APs to contain a rogue AP

What are the benefits/drawbacks of using 4 controller-based APs to contain a rogue AP vs using just one. If I understand it correctly a single AP can never be set to contain more than 3 rogues, and will never use more than 30% of its resources to do so. Also, you can set a maximum of 4 APs on "containment duty" against one rogue. I also believe that containment involves sending spoofed messages to the wireless clients which requires your APs to be within range of all the rogue clients.
So.. what do you guys think? Let me know if my conclusions regarding the process are incorrect!
Thanks!

If you actually try this in the lab with a client set to do a continuous ping, you will see that containing with only one AP will still allow clients to connect. The plan here, as it was designed by Airespace, was to only contain radios that you KNOW are a threat. APs on your own wired network were detected by RF and then verified to be on the wired network with a protocol called RLDP. Once an AP was discovered via RLDP, the rogue was automatically contained by a 4 AP containment if 4 APs heard the rogue. An alert was then sent to the administrator and the rogue was mapped for location so that it could be collected. Containing APs that were neighboring was disuaded because of the FCC "Good Neighbor" policy. You needed to make sure the AP was an actual threat to the security of your network before taking action. This became Cisco's policy on all rogue devices and they disabled RLDP from the system. Now if you do a contain you see the Legal Disclaimer that Cisco has put into place. A 4 AP containment will use some resources of your APs but it should not be a long term fix. You should go and deal with the rogue device personally once it is contained and mapped. After dealing with it, set the appropriate rogue state and remove containment.

Issue containing a rogue AP

My WLC has detected (via 15 detecting radios) a rogue AP with a client connected to it. The infrastructure has not determined that the AP is plugged into the local network. I'm trying to contain the AP - I classify it as "Malicious", update its status to "Contain" & assign 2 APs (though the number of APs don't matter here) to contain the rogue.
Everything looks right, as the WLC shows that the rogue AP is in a "Contained" status. However, after about a minute the WLC shows the rogue having been reverted to an "Alert" status. I've contain other rogues before but have yet to see one not have the "Contained" status stick.
Anyone seen this? Or know why it's happening? Thanks!

Check and verify that the "rogue" is not one of your APs associated to a controller with a different mobility group name but on the same network as your primary mobility group. This is the only way I could think that this is happeneing. Also, try a 4 AP containment. At 2 APs a client could still associate to the rogue thus generating a new alert.

Can I use time machine to back up computer hard drive AND contents of an external HD (contains only photos) onto another external hard drive (standalone HD for backups only)? PLEASE HELP!!

I keep my photo files on a separate external hard drive, separate from my laptop hard drive. And I want to be able to use time machine as the back-up system to back up BOTH the computer's hard drive AND the external hard drive.... and i want all of the "back-up" information contained on a separate standalone external HD. So in the end, I have a 250GB computer hardrive, a 1TB external hardrive, and I want to have a 2nd external hard drive that will be the location to store the "back-ups" (using time machine) which will be either a 2TB or 3TB harddrive.
I am in dire need of help....

Yes, just make sure that they are not excluded in Time Machine.

I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?

That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.

How to display a view which contain interactive form in an external window

Anyone know how to display a view which contain interactive form in an external window?
I managed to display the view in an internal window with the following code:
IWDWindowInfo windowInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("PdfReportWin");
IWDWindow window = wdComponentAPI.getWindowManager().createWindow( windowInfo, true);
For external window, I tried this method : wdComponentAPI.getWindowManager().createExternalWindow(String URL, String title, boolean modal) but there are no parameter for view name?
Maybe this is not the correct way, really appreaciate if anyone can help.

Hi,
            U need to the following
           1.Create another window
           2.Create a view in it tat contains Interacive form element.
           3. call this window dynamically thru the first window by creating a context element of IWDWindow type
The code may help:
IWDWindowInfo windowInfo =(IWDWindowInfo) wdComponentAPI.getComponentInfo().findInWindows("SearchEmpwind");
      IWDWindow window = wdThis.wdGetAPI().getComponent().getWindowManager().createWindow(windowInfo, true);
      window.setWindowPosition(WDWindowPos.CENTER);
      window.setWindowSize(400, 250);
      window.open();
      wdContext.currentContextElement().setEmpSearchWind(window);
Regards
Ishita

HUGE amount of data in flat file every day to external system

Hello,
i have to develop several programs to export all tables data in a flat file for external system ( EG. WEB).
I have some worries like if is possible by SAP export all KNA1 data that contains a lot of data in a flat file using the extraction:
SELECT * FROM KNA1 ITO TABLE TB_KNA1.
I need some advices about these kind of huge extractions.
I also have to extract from some tables, only the data changes, new record, and deleted records; to do this I thought of developing a program that every day extract all data from MARA and save the extraction in a custom table like MARA; the next day when the programs runs compare all data of the new extraction with the old extraction in the ZMARA table to understand the datachanges, new records or deleted record.. It's a righ approach? Can have problems with performance? Do you now other methods?
Thanks a lot!
Bye

you should not have a problem with this simple approach, transferring each row to the output file rather than reading all data into an internal table first:
open dataset <file> ...
select * from kna1 into wa_kna1
transfer wa_kna1 to <file>
endselect
close dataset <file>
Thomas

Integration of Financials with external systems

Hi,
I am strugling with an implementation where the client is not sure if Oracle Financials suits his business processes
Overview of situation on Hand:
We do not have the product installed as yet at the client site
Products of Oracle Financials to be used :General Ledger, Account Receivable, Account Payable, Fixed Assets,India Localization Patch
Products of Oracle Applications NOT available for use :
Purchasing, Inventory, Order Management
(All these areas are being covered by developing a customized Bespoke system)
1.     Is it possible to use Oracle India Localizations (with regards to the excise functionality, for e.g. claiming of ModVat, the various excise registers that are to be maintained for e.g. RG23 A, RG23C,etc ) in the above situation (without implementing Purchasing, Inventory, and Order Management?).
2.     Further, while passing the Vendor’s Bills (in Oracle Payables), one of the criteria for PO Matching is to check if the ModVat has been claimed. Is this functionality available in Payables with the India localization patch?
3.     Does Oracle India localization cater for VAT requirements?
4.     Is an Open Interface available to transfer Purchase Order data from external systems to Oracle Purchasing tables (which are shared by Oracle Payables the names being PO_HEADERS, PO_LINES, PO_LINES_LOCATIONS, PO_DISTRIBUTIONS, PO_DISTRIBUTIONS_AP_V (VIEW OF PO_DISTRIBUTIONS), PO_RELEASES (Blanket Purchase Orders), PO_LOOKUP_CODES) at transactional frequency? However, if the oracle purchasing module is not being used, can the interface tables of Purchasing be used?
5.     An open interface (Payables Open Interface) is available in Oracle Payables to import the Invoices from external systems. While importing these invoices, does the system expect to have the Purchase Order data in the PO tables mentioned in the point above?
6.     Is an Open Interface available to transfer Quantity Received/Accepted data from external systems to PO_line_locations table to enable carrying out of 2/3/4 way matching of Purchase orders with invoices? Can the 4 way mathcing be carried out in AP by just importing Purchase Order data??
7.     Can the Credit Card Transaction Interface be used for uploading employee expenses / advances settlement (not carried out via credit card) directly from feeder system?
8.     Is it possible to use Open Item interface (including import concurrent program) even though Inventory module is not being installed ? If yes, then we would like to use this interface for updating Item master from bespoke system..
9.     Can Auto Invoice API be used to import invoices from feeder system / legacy system (via RA interface Tables) into the Oracle receivable invoice tables? Is order number as column a prerequisite for successful completion of Auto Invoice API?
10. Where should the Masters be kept....OF of Bespoke
eg. Employee master, Inventory Item Master etc.
11. What is the best strategy for keeping the data in Bepoke and OF related to Masters in sync?
I have got various answers to these questions .....but some seem to contradict each other.
PLEASE HELP!!
Thanks,
Kamana

Dear Kamana,
Can you send me the replies given by our other Forum Friends, let me analyze the entire stuff and get back to you with a single consolidated bible for all your questions.
Gopal

Office 365 ECT to Azure Cannot connect to the LobSystem (External System)

I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01

Hi,
It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
157.55.225.241, or update the changed address to date.
http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Create Support Message from external system

HI experts,
I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
Please let me know you rthoughts on this.
Thanks
Eric

Hi guys,
Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
As you will notice, there are lots of standard objects that I've changed. =)
My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
Thanks,
Eric

Production Order and external system non-SAP

Dear Friends,
I need to send a Production Order to a external system no SAP, and upload the information back to SAP,
SAP does something standard to accomplish this task?
To send Production Order, I created an IDOC with report RCCLORD, this IDOC contains all information of a production order (AUFNR, WERKS,..) and all operations and materials. But I don't know how to process the information returned.
Also I have read some information about the interface PP-PDC, but I don't know how to use it.
Please, Can anyone tell me the best way to accomplish this task?
this is the scenario:
SAP R/3 -
> Production Order -
> External System
External System -
> Return information about Production Order -
> SAP R/3
Thanks!

Hi,
PP-PDC is for confirmations only, see further details
http://help.sap.com/erp2005_ehp_05/helpdata/en/31/fcbd3411d411d3b6b60000e8359890/frameset.htm
maybe usage of POI is an option for you. See details here
http://help.sap.com/erp2005_ehp_05/helpdata/EN/1a/0e347b539911d1898b0000e8322d00/frameset.htm
BR Sabine

SAP R/3 to External System RFC issue

Hi Experts,
We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
Order Processing:
During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data. Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
Current Issue:
The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection. Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
For example:
On every business day, there will be 50,000 Sales orders.
So, 5 or 10 sales orders are getting hanged every day.
We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
We are having this problem only in Prod.
Any thoughts to solve this issue is highly appreciated.
Advance thanks for your great help.
Thanks and Regards,
Srinivasa

Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest}]
[{PERFORMING subr}|ON END OF TASK].

SAP R/3 to External System RFC issue during Sales Order Processing

Hi Experts,
We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
Order Processing:
During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data.
Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
Current Issue:
The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection. Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
For example:
On every business day, there will be 50,000 Sales orders.
So, 5 or 10 sales orders are getting hanged every day.
We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
We are having this problem only in Prod.
Any thoughts to solve this issue is highly appreciated.
Advance thanks for your great help.
Thanks and Regards,
Srinivasa

Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest}]
[{PERFORMING subr}|ON END OF TASK].

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

HR - XI - External System: one IDOC to multiple XML Files

Hi,
I have a scenario where I need, out of one HRMD_A07 IDOC send multiple XML files:
The IDOC and the XML files can the Master data for many employee (IDOC has max of 200 as of SAP, external system, max of 1000).
The IDOC will be generated with change pointers with all the needed filters (I can add/remove if needed).
My goal is to generate 3 types of XML files:
- 1 for the persons (containing basic info like name, firstname, persnr,etc)
- 1 for the various unit (with basic info of unit like number, description & name)
- 1 for the links between persons and units (this person is linked with that unit)
The structures of the 3 XML files are know and can be imported via XSD definition.
Do I need to use BPM for doing so or is there a way to do that with simple mapping?
If BPM is needed, as I new to that, if you have a link to a begginer guide, fell free to send it
Cheers,
greg

hi,
For your scenario there is no need of BPM.
In message mapping select the message tag.
In the target add 3 message types.
Just map the fields.Go to Interface mapping add the 3 message in the target.
Get the mapping.
In ID sender agreement,Receiver Determination is same.
In Interface Determination select extended.Get the mapping.
Create 3 Receiver agreement for each Receiver.
Regards,
Prakasu

APs being contained as rogues by an external system

Similar Messages

Maybe you are looking for