AQ Adapter supports JMSOBJECT

Hi.
We have created Queue in AQ of Message Type JMSObject
Is it possible to read JMSObject in AQ?.........
Jdeveloper don't event supports when listing the Queues under it......
Thanks
Sivakumar

Even though JMS is preferred over AQ when there are no specific constraints, goals, etc. on your queueing implementation, you could still use AQ and an AQ adapter. In that case not all message/payload types are supported. Also see: ESB 10.1.3.1 Not Connecting to AQ QUEUE with error You can however use AQ with XMLType as message/payload type.
Regards, Ronald

Similar Messages

Does Mini DisplayPort to VGA adapter support DDC/CI?

I have a Mac Pro and a MacBook5,1.
Mac Pro is attached to a BenQ monitor which supports DDC/CI communication.
With a capable software I'm able to set brightness and contrast of the monitor without using monitor's OSD (thanks to DDC/CI communication).
If I attach the same monitor to my MacBook5,1 with VGA cable through a Mini DisplayPort to VGA adapter, DDC/CI stops working.
I'm no more able to set brightness and contrast and the app reports that monitor isn't DDC/CI capable.
I'm sure its not an issue related to the app that I'm using to set brightness and contrast. It detects correctly both of the monitor (the internal and the external one) and I'm sure that I'm sending DDC/CI commands to the external monitor and not to the internal one.
So, does Mini DisplayPort to VGA adapter support DDC/CI, and therefore passthrough its signal?
Or is it a problem of MacBook and its Mini DisplayPort which does not support DDC/CI at all? I don't think so.
I hope you can help me.
Regards
Andrea

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600)

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolution

Hi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation

Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation.on my dock

Have you contacted the dock manufacturer?
The adopter supports audio if the dock manufacturer says the dock supports the 5G iPod.
It may be that the dock does not work with iOS 6.x vie the 5G. Sometimes an iOS update will break compatibility.

Will the new lightning to 30-pin adapter support.... ?

Will the new lightning to 30-pin adapter support a cord at which the 30 pin goes and splits into a RCA cable for audio output and USB for charging, this is what is used in my car currently to feed my former iphone 4 into the cars stereo while also charging? My question is there is no video output only audio and charging, will it work?

doubt it as it would be as easy for the old charger to do that as the new ligthing
when a feature is removed then it would not make much sense to remove it and then reinterduce it later on with no benefit to the producer of the product

How to make PI 7.0 soap adapter support SOAP 1.2

hi all:
Is there some idea make PI 7.0 soap adapter support SOAP 1.2?
I have look the document about soap adapter,and it specified that soap adapter only support SOAP 1.1.
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm.
my scenario:
external system send message via soap 1.2 to xi.

for more detail about axis soap adapters refer this link[http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm]

JMS Adapter Supports below message

Hi Frnds,
I am working on one scenario i have to read and write RFH2 Message from MQ,we decided to use jms adapter.
JMS Adapter supports below Message to put in MQ,
<Data>
     <MQRFH2>
          <usr>
               <TransactionType>GL_Update</TransactionType>
               <Environment>LIVE</Environment>
               <SourceScheme>EANCM</SourceScheme>
               <SourceApplicationId>5051150003606</SourceApplicationId>
               <DestScheme>EANCM</DestScheme>
               <DestinationRouting>5051150003330</DestinationRouting>
               <OriginalRouting/>
               <MessageRecordCount>1</MessageRecordCount>
               <BusinessTransactionId>20090405193001</BusinessTransactionId>
               <ParentBusTID/>
               <ParentBusId/>
               <EECode>Y</EECode>
          </usr>
          <mcd>
               <Msd>xml</Msd>
          </mcd>
     </MQRFH2>
     <Message>
          <GL_Update>
               <header>
                    <SourceEAN>5051150003606</SourceEAN>
                    <DestinationEAN>5051150003330</DestinationEAN>
               </header>
               <detail>
                    <AuthorisedUser/>
                    <HeaderText/>
                    <HeaderReference/>
                    <PostingItem>
                         <ProfitCentre>7027101000</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001413150</AccountCode>
                         <GlobalBusinessIdentifier>AU10</GlobalBusinessIdentifier>
                         <MonetaryAmount>0000000100.00</MonetaryAmount>
                         <GlobalCurrencyCode>AUD</GlobalCurrencyCode>
                         <RunDate>20080725</RunDate>
                         <Description>IV006270M000000000000000000001</Description>
                         <WorkBreakdownStructureElement/>
                         <BudgetRequest/>
                         <TransactionType/>
                         <TransactionNumber/>
                         <PostingKey>50</PostingKey>
                         <SalesTax>
                              <SalesTaxCode/>
                              <SalesTaxAmount/>
                         </SalesTax>
                         <PersonnelNumber/>
                         <Assignment/>
                         <CalculateTaxBase/>
                         <BaselineDate/>
                         <PaymentTerms/>
                         <MedicalReference/>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre/>
                         <CostCentre/>
                         <SalesTax>
                              <SalesTaxCode>P3</SalesTaxCode>
                         </SalesTax>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre>7022001001</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001701001</AccountCode>
                    </PostingItem>
               </detail>
               <trailer>
                    <thisDocumentGenerationDateTime>20090405T072928Z</thisDocumentGenerationDateTime>
                    <thisDocumentIdentifier>20090405T072928Z</thisDocumentIdentifier>
               </trailer>
          </GL_Update>
     </Message>
</Data>
please help me on this
it possible to achieve using JMS adapter or not?? what is the alternative solution ??
Regards,
raj

Hi RSR,
JMS is the better way to connect sonic MQ.below iam attaching you few points while using JMS.
1.for the JMS adapter an external driver is needed (java archive)
2.this archive is provided by the respective provider of the queuing system
3.the driver has to be deployed via SDM , see XI configuration guide for details
4.Routing rules and sender has to be specified as for any other channel in the directory
    object model
5.the message header information is determined from the appropriate sender
   agreement for the communication channel
6.the communication channel defined must be used in exactly one sender agreement
7.at least the interface name and the sender service must be qualified in the
    sender agreement ,other fields are optional
Depending on the transport protocol selected, specify the following :
8.For Sonic MQ JMS Provider :
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Server port
·        JMS queue
9.JNDI JMS Provider Lookup
·        JNDI name of QueueConnectionFactory
·        JNDI name of JMS queue
·        Name of JNDI Initial Context Factory
·        Address of JNDI server
·        JNDI users
·        JNDI password with confirmation
10.
For WebSphereMQ (MQ Series) JMS Provider
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Queue manager name
·        Channel name
·        JMS queue
·        Character set for non-ASCll names
·        Transport/network protocol
·        Target client
11.
JMS Provider Administered Objects via File
   File name of serialized object QueueConnectionFactory
   File name of serialized object Queue
With Rgds,
MF.Haq

** JDBC Sender Adapter support custom module ...?

Hi friends,
Does JDBC Sender Adapter support custom module ? If it is how it wil work ?
Kind Regards,
Jeg P.

Hi Kulwinder,
We want to separte the records (1:n) returned by JDBC sender adapter XML. ie. Split/Parse the records in XML and then send to BPM (one by one) instead of whole message . For that purpose, we want to write an adapter module.
Is this possible ?
Kind Regards,
Jeg P.

Does the sender SOAP adapter support multiple operations per interface

Hi guys,
does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
Thanks,
Andrzej

theoretically Yes.
Do have a look into this when you get time
/people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

JMS receiver adapter supports SSL??

Hi
We have a interface in our project which uses JMS adapter and to make it secured communication , we are requested to use SSL.
Can anyone please suggest if JMS receiver adapter supports SSL.
If no possible, coould you please let us know any other alternative approach to this.
Regards
Jagruth

Look into below discussions
JMS To MQSeries with SSL.
Regards
Aashish Sinha

Does Seeburger's SFTP adapter support dynamic filename creation

Hi all,
Does the SFTP adapter support dynamic filename creation.
If yes, then do we have to use UDF's and are there any specific settings that have to be done in the SFTP communication channel.
Please provide a blog which helps in the configuration process of the above case.
thanks,
younus

Dynamic Creation of File using counter in Seeburger Variable:
1. Configuration Needed in the Communication Channel:
The process of dynamic creation of files can be done we have to select the following checkbox in the receiver channel:
Dynamic Attribute in receiver Channel:
Import the following modules:
Localejbs/Seeburger/solution/sftp
Localejbs/Seeburger/AttribMapper
Localejbs/ModuleProcessorExitBean
Enter the desired file naming convention:
Use the Parameter GetCounter("ID") to the place where the counter is expected to come.
2. Configuration Needed in the SeeBurger Workbench:
If the J2EE server is listening on a port different from 50000 (which is the standard for the SAP client 000), the port number must be configured:
Login into the seeburger workbench using the URL
http://<localhost>:<port number>/seeburger/index.html
Select Property Store.
Create or edit the following property:
Parameter
Value
Namespace
http://seeburger.com/xi/SeeFunctions
Key
provider.servlet.server
Value
http://localhost:50000/ (where the port number 50000 must be set
accordingly to the J2EE server configuration).
Note: The configured value (server URL) has to end with a slash (/). Otherwise,
SeeFunctions will not work correctly.
If we need to start the counter from any specific value , it can be configured in the SeeBurger workbench, this value can be maintained in Mapping Variables :

Mainframe adapter support for FOCUS apps

Does the WebLogic Mainframe Adapter support mainframe FOCUS applications? What about clists?
Thanks
Glen

Does the WebLogic Mainframe Adapter support mainframe FOCUS applications? What about clists?
Thanks
Glen

Does Interconnect FTP Adapter support SFTP/SSH?

Does Interconnect FTP Adapter support SFTP/SSH?
Thanks!
-mb

No it doesn't!
Actually, FTP adapter in BPEL support secure FTP (FTPS, FTP over SSL), but only on Solaris platform if believe documentation.
You can try to connect BPEL FTP adapter to InterConnect using new JCA adapter (in IC 10.1.2.0.2), but I'm not sure wether BPEL FTP adapter is JCA-compatable or not (since it is not in Oracle AS adapters package but inside BPEL)...

NVIDIA NVS Graphic adapter support KVM-Intel AMT/vPro?

Hi there,
I have a Thinkpad T410, Intel core i7, Intel Centrino Advanced-N 6200 AGN and the NVIDIA NVS 3100m Graphic adapter, I asked to Intel and that adapter does not support KVM:
http://software.intel.com/en-us/forums/showthread.php?t=78585&o=a&s=lr
I need to use KVM and I cannot understand why if the Lenovo product review shows the NVIDIA adapter supports AMT why it acually does not support KVM, so it does not really support AMT (it's just a partial support):
http://software.intel.com/en-us/forums/showthread.php?t=76173
So, I'm forced to lose a good NVIDIA graphic card for an integrated one, the question is: can I change to Intel Graphics Media Accelerator 57000MHD-AMT? -it's a cheaper one-
Help!
Solved!
Go to Solution.

Hi javiercaceres!
According to the Hardware Maintenance Manual, it's part of the system board, so the graphics adapter can't be swapped out.
I don't work for Lenovo. I'm a crazy volunteer!

Is Illustrator host adapter support available for HTML5 extensions?

From what I can see in the extension builder 3 install, a JavaScript host adpater interface is only available for Photoshop. Is this correct? If so, is there a timeline for the availability of host adapter support for Illustrator? This is a critical need for us to be able to transition our Extensions from the Flex framework to the new HTML5 framework.

From what I can see in the extension builder 3 install, a JavaScript host adpater interface is only available for Photoshop. Is this correct? If so, is there a timeline for the availability of host adapter support for Illustrator? This is a critical need for us to be able to transition our Extensions from the Flex framework to the new HTML5 framework.

AQ Adapter supports JMSOBJECT

Similar Messages

Maybe you are looking for