Archive and print and archive buttons not active

I create a smartform and join it in sap. It is transection me9a.
The problem when I run the program comes printpreview. There are two button that "Archive" and "Print and Archive". But they are not active. I wan to use them. What sould I do?

Pass the below parameter to smartform function module,
Ex,
EXPORTING
                control_parameters = control_param
                output_options     = output_opt
Check the below structure:
data:  control_param    type ssfctrlop,
         output_opt       type ssfcompop.
  control_param-no_dialog = 'X'.
      control_param-preview = 'X'.
      control_param-getotf = ''.
      output_opt-tddest = 'LOCL'.
      output_opt-tdnoprint = 'X'.
Similarly chack the other structure <b>ssfctrlop</b>
Just a rough idea given above.
Close the thread if your question is answered.
Regards,
SaiRam

Similar Messages

  • My canon sd 630 and printer ip 1600 do not appear on my computer

    My digital camera canon sd 630 and printer ip 1600 do not appear on my computer anymore. They worked fine before and lately they don't work. It's not the cables because my ipods and other USB peripherals (flash drives, scanner) work just fine.
    Also, I have a MacBook Pro with the same version of iphoto (6.0.6) and the same Mac OS X (10.4.9) and they work fine with with the MacBook!
    Has anyone had this problem before? Can anyone help? Thanks!

    LeoF:
    Welcome to the Apple Discussions. With the camera connected and the printer turned on are either recognized by the System Profiler?
    Try the following;
    1 - run OnyX and clean out the user caches and run the maintenance scripts.
    2 - download and run the 10.4.9 COMBO updater followed by a repair of disk permissions with Disk Utility.
    3 - remove the printer driver with Print Center Utility and then reinstall.
    Do you Twango?

  • Change Button Not Active even after Delivery Completion Indicator is Remove

    Hi ,
    In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
    Thanks & Regards,

    Hi,
    Please check these notes.
    Note 1267916 - PO item flags do not stay checked
    Note 1174982 - Return/deletion of confirmation does not update the PO flag
    Thanks
    Zameer

  • After adding list view into the web part page, the items and list control ribbon is not activated.

    I created new webpart page and added one list view web part into the page.
    However I can see the ITEMS and LIST tabs on ribbon area, but all the buttons are deactivated.
    Do I have to activate any feature for this or any settings are needed for the webpart?
    I already have full permission for this site.
    For your easy understand I added the screenshot.

    Thanks for you advice.
    However I am currently using the context menu and edit link in the view.
    My Client keep complaining about the ribbon is not activated even thought it works fine in the SharePoint 2010.

  • Save button not activated in AD HOC query

    Dear All,
    I have this problem where my Save button is not Activated in Adhoc query, since it appears deactivated i am also not able to see any dump with which i can work.
    I am and SAP HR consultant aanusing ECC 6.0,
    Please help in the same.
    Regards

    I Hi
    Type su53 and found the missing authoraisation and fwd the same to ur basis team
    if u use pqah for adhoc query it not have save option ,Hope u r using the
    S_PH0_48000510
    if not use this it will have save option
    with regards
    partha

  • DELETE button not active in Invoice

    Hi All,
    We have ECC 6.0 and SRM 5.0 . After creating Invoice in SRM front, User keeps the Invoice in HELD or posts it with errors when it goes into "TO BE CORRECTED MANUALLY"  status. Now when the user agains views it in display mode, only CHANGE button is active. DELETE is greyed out .This is the case only for invoices created by the same user. So, can you please throw some light on what can be the reason for this inconsistency as for some users the DELETE button works and some it does not.
    Any help will be highly appreciated.
    Regards,
    Sheetal.

    We had raised a call with SAP and SAP has replied back saying " This logic was implemented for technical reasons, to avoid, that the invoice data is still in the buffer and modifications to the document which could lead to inconsistencies. This logic was implemented by note 728714, and should prevent above mentioned situation.
    This issue is resolved now.
    Regards,
    Sheetal.

  • Delete Button not active in Change PO

    Hi All,
         I looked at security and authorizations, and checked the PO status in both SRM and ECC. All seems to be ok. But not able to delete the PO line items. We are in SRM 5.0 ECS SP15.0. PO was changed, added lines and ordered and transferred to Backend as well. Now when I want to delete the PO line items, Delete button is inactive. Please advise.
    Regards
    Rao

    Hi Rao,
    Is this for all PO's?
    Deletion is not possible                                                  
       i. for the POs which are in status 'ORDERED'                           
      ii. active version of the PO for which follow-on document exists.....  
    As per the standard system behaviour, once the PO is already sent out       
    to the Vendor, the Delete button at Header will be disabled. And this       
    is the standard behavior. You can not delete the PO from the header         
    and the only option you can do is deleting the items from this PO.          
    Also, maybe try MANUALLY running update reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2 which will ensure that SRM and the backend are uptodate and retest.
    Hope this helps,
    Kind Regards,
    Matthew

  • Buttons Not Active?

    Hi,
    after an upgrade from ERP2004 to ERP2005 I find that my BSPs are displayed (and enabled) but nothing happens when I press buttons and some MIME objects are not displayed. Have I missed something in SICF? What could be the cause of this problem?
    Thanks.
    /Elvez

    Hi all,
    this was an easy one. Some default_host->sap->bc services were not activated. After activating these services everything worked fine.
    /Elvez

  • Raid Admin 1.5 - Recognize Array button not active

    Hi all,
    just updated to RaidAdmin 1.5, updated firmware on both controllers to 1.5 version.
    I have 6 disks on which should be my lost array. Suddenly 'Recognize Array' button in utilities is not active.
    Any idea?
    Leos.

    ok. The whole story:
    Few month ago, I had RAID 3 schema on 6 disks. I did firmware update on my XRaid. This update WAS SUCCESSFUL. After XRaid restart, I lost my array. I didn't have backup. After unsuccessful local Apple support, I tried 3rd party companies to reascue my data. Noone helped me. I managed help from Apple in US, I sent my disks to them (quite expencive, I am from Czech Republic.). They recovered raid set on my disks to RAID 3 schema on 5 disks only - don't understand this. So I called them back a and I sent disks again, with detailed desription how it must be. Thay sayed OK and sent me back 6 disks, with no raid set schema - 6 unassigned to any array. And as a bonus, one of them was failed. So, now I have 6 disks, Apple claims, that raid schema is on disks (but i cannot see it on my raid - I realy tried everything - swapping possitions, controllers, cables .....). So when Raid Admin 1.5 brings this new function - recognize array, I started thinkink, that I have one more chance to recover my data back. But situation is as I described in first topic....

  • IH01: Search button not active

    Hi PM Gurus,
    I am working on technical upgrade from 46C to ECC6. I am facing a problem in IH01, after executing the transaction, search button (binocular) is not active. Can any one suggest me what may be the possible reason & how it has to be activated.
    Thanks,
    Ashok

    Hi Ashok,
    I think, IH01 is the transaction code for the selection page ie editing the inputs... (function location structure), there we need not to search anything whereas we need to input the various selections. Thats is the reason sarch button is disabled....
    Once u input the data and transact, the buttons wil be activtaed.
    In case u are looking for searching something specific, pls do let me knwo.
    warm regards,
    punam gupta
    Pune

  • Publish Comments Button not Active

    I have Adobe Acrobat X Pro Ink and my publish comments button in not active how can I get it active so i can add comments to a shared review

    Publish comments remains inactive till you have not added any new comment/modified any existing comment.

  • IPad1: synchronization button not active in iTunes = cannot synchronize anymore (either via Wlan nor via USB)

    after i recognized that my IPad is not synchronized via WLAN i tried to do this via USB. I connected the iPad with the computer and configured iTunes to NOT synchronize via WLAN. In iTunes the "Synchronize" button is shown, but not activated. Therefore i'm currently not able to synchronize.
    ==> can someone help?

    after i recognized that my IPad is not synchronized via WLAN i tried to do this via USB. I connected the iPad with the computer and configured iTunes to NOT synchronize via WLAN. In iTunes the "Synchronize" button is shown, but not activated. Therefore i'm currently not able to synchronize.
    ==> can someone help?

  • Cells button not active in query

    Hi,
    This system has just been upgraded to BI7.0 SP17.  None of the queries I have created give me the option to change the Cells - the button is not active.
    How do I make it active?
    Thanks
    Suzanne

    Did some more research and found out that I need to have 2 structures in the query for the cells to be active

  • How do I add a "Print this page" button (not just a "Print" button) to a PDF?

    I am creating a multipage PDF in Acrobat Pro 8 for a client and it includes a linked table of contents with several sections and also several forms sprinkled throughout. I need to be able to add buttons that allow the user to print specific page numbers. Is it possible to add a "print this page" button to a page ... or even a "print this form" in case the form within the larger document is multiple pages? I would appreciate any help, thanks!

    I was just coming back to here to say I've figured it out and am using an invisible button (over text that was created to look like a link) on each page... tested and working (when combined with the code). Thank you for your replies!

  • Modification Buttons not active in Integration Repository

    Hello,
    we have a strange behaviour in Integration Repository. With java 1.3 on frontend all looks fine but with 1.6 modification buttons (text-preview...) for message-mapping objects (tab Design) are not active.
    Does anybody know this issue? What can we do to sail round this problem?
    Thanks
    Andreas

    Hi Andreas,
    I faced the same issue some times back, when I upgraded java from 1.4  to 1.6 version.
    So I had to disable all the java version later than java 1.4.2.
    Try this steps :-
    1. go to Control Panel - Java.
    2. In Java control panel , go to General tab.
       In temprory internet files click View. Here delete all the entries related to Your XI link.
    3. In Java control panel, go to Java tab.
       In java Applet Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
       In java Application Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
    Regards,
    Sunil Chandra

Maybe you are looking for