Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Similar Messages

Replacing places.sqlite with older file is not working, please help I need my bookmarks

My hard drive was recently crashed so I had to reinstall windows 7 operating system. I recovered the deleted places.sqlite file from before the crash. I replaced the old file with new places.sqlite file but is not restoring any of the bookmarks
Please help, I have a lot of important bookmarks stored in old file
Please suggest a way to open the places.sqlite file manually & extract bookmarks from it or any other way to get the bookmarks back

It is possible that this copy of places.sqlite is corrupted if your bookmarks aren't restored and in that case you can't use this file and will have to delete all the places files (-shm and -wal as well)
If you also have a copy of the JSON backups in the bookmarkbackups folder then try to restore the bookmarks that way.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*https://support.mozilla.org/kb/restore-bookmarks-from-backup-or-move-them
You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

Pro Tools 6.4 with Mbox using 10.4 is not working - please help??

I just updated my OS from 10.3 to 10.4.9 now my Pro Tools won't work. When I try to launch the software, I get this message: digidesign hardware is in use by another application (-1133). I would LOVE a solution.
thank you!!

If you are in Thailand then you cannot use the Israeli store, you have to be in a country to use its store.
From the page that you posted from :
iTunes Radio is currently available in the United States and Australia.

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

HT4539 All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards. :( :'(

All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.

What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media

TS1702 After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me

After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

KeyFieldValue in Sender File Adapter Not Working

Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
Sreedhar

If you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

File Adapter Not Working Proper

Hi XI Experts,
Here, we configured Idoc to File Scenario using File Adapter. We are getting errors in records while receiving the Text File.
The error we r getting in those record of the file where some data is missing. After which whole records get curropted. ForEx:
HeaderLine
Store    ArticleCode    ArtDescription    MerCat    Amount   TaxCode
3022    130000000      Shirt                  FMCG     200           k5
3022    130000001       Short                FMCG     150           k5
As above line items have allthe fields filled so uptill this text file we r getting is error free.
3022     130000003      shirt
3022     130000004      masalas         fmcg         50             k1
As in above line item few of fields are missing and whole recordsafter this record get corrupted. And weget following corrupted data
3022     130000003      shirt         50        fmcg
3022     130000004      masalas         fmcg         50             k1
Can something be done with FCC ????
As this is effecting the business Please reply ASAP.

Hi,
Also check ur mapping program.It is Idoc to file scenario rite...then see whether ur target structure is getting mapped from the idoc and check ur mapping once and see whether u r getting all the fields in the target xml.Check ur xml payload of ur file in RWB.
And that too no need of giving PA01.fieldNames in the content conversion parameters.
Directly u can give:
recordset structure name.addHeaderLine
recordset structure name.fieldSeparator
recordset structure name.endSeparator
Hope u got my point.
Regards,
Prasanthi.

Sender JMS Adapter - NOT Working

Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
Does anybody has any idea about this error ?
I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
Thanks in anticipation...

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

My file io wont work, please help

Hi, for some reason my code for the file io doesn't seem to be passing the input to the file. Can someone correct the code or tell me whats wrong?
Thanks
Ivory
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.util.*;
import javax.swing.border.Border;
class checkPassword {
     checkPassword(){
OperationHandler1 oh = new OperationHandler1();
oh.customerlogIn();
public static void main(String args[]){
checkPassword checkpw = new checkPassword();
class Customer implements Serializable {
     private String CName;
     private String PW;
public void setDetails(String cName, String pw) {
     CName = cName;
     PW = pw;
public String getCName() { return CName; }
public String getPW() { return PW; }
class OperationHandler1 implements Runnable{
     JFrame newFrame;
JTextField userid = new JTextField(15);
     JPasswordField passwordField = new JPasswordField(15);
JPanel buttonPanel;
JPanel userPanel;
     private ButtonGroup radioGroup;
private JRadioButton register, logIn;
     private GridLayout buttonPanelLayout;
     private graphics.ImagePanel picturePanel = new graphics.ImagePanel();
//state variables
private boolean logInstate = false;
private boolean registerstate = false;
private boolean CustomMachinestate = false;
Vector v = new Vector();
FileInputStream fis;
ObjectInputStream ois;
OperationHandler1(){
     try {
     fis = new FileInputStream("clients.dat");
     ois = new ObjectInputStream(fis);
     v = (Vector) ois.readObject();
     ois.close();
     }catch(Exception e){}
     public void run(){
     try {
          FileOutputStream fos = new FileOutputStream("clients.dat");
     ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(v);
     oos.flush();
     oos.close();
}catch(Exception e){
          JOptionPane.showMessageDialog(newFrame,
"Error Opening Data File: Could Not Save Contents.",
"Error Opening Data File", JOptionPane.INFORMATION_MESSAGE);
public void customerlogIn() {
     newFrame = new JFrame();
newFrame.setSize(500, 300);
          newFrame.setLocation(200, 160);
          newFrame.setUndecorated( true );
          JButton next = new JButton("Next");
     JButton quit = new JButton("Cancel");
          JLabel label0 = new JLabel();
          label0.setForeground(new Color(105,105,105));
          label0.setFont(new Font("Ariel", Font.BOLD, 16));
          label0.setText
     (" Welcome! ");
          JLabel label1 = new JLabel (
               " Please sign in to enter the system");
          label1.setForeground(new Color(0,0,155));
          label1.setFont(new Font("Ariel", Font.BOLD, 12));
          //set up radioButtons and add to buttonPanel
register = new JRadioButton("Not registered yet, please sign up" );
logIn = new JRadioButton( "Log in if you are already registered");
register.setForeground(new Color(105,105,0));
register.setBackground(new Color(205,255,255));
          register.setFont(new Font("Ariel", Font.BOLD, 12));
          logIn.setForeground(new Color(105,105,0));
          logIn.setBackground(new Color(205,255,255));
          logIn.setFont(new Font("Ariel", Font.BOLD, 12));
          //register radiobutton handlers
RadioButtonHandler handler = new RadioButtonHandler();
register.addItemListener(handler);
logIn.addItemListener(handler);
//put radio buttons in a radio group
radioGroup = new ButtonGroup();
radioGroup.add(register );
radioGroup.add(logIn);
buttonPanel = new JPanel();
buttonPanelLayout = new GridLayout(6, 1, 0, 1);
buttonPanel.setLayout(buttonPanelLayout);
buttonPanel.setBackground(new Color(205,255,255));
JLabel label2 = new JLabel ("User ID: ");
          label2.setForeground(new Color(0,0,155));
          label2.setFont(new Font("Ariel", Font.BOLD, 12));
          JLabel label3 = new JLabel ("Password:");
          label3.setForeground(new Color(0,0,155));
          label3.setFont(new Font("Ariel", Font.BOLD, 12));
JPanel logInPanel1 = new JPanel();
JPanel logInPanel2 = new JPanel();
logInPanel1.setBackground(new Color(205,255,255));
logInPanel2.setBackground(new Color(205,255,255));
logInPanel1.add( label2);
logInPanel1.add( userid);
logInPanel2.add( label3);
logInPanel2.add( passwordField);
          buttonPanel.add( label0);
          buttonPanel.add( label1);
buttonPanel.add( logIn);
buttonPanel.add( logInPanel1);
buttonPanel.add( logInPanel2);
buttonPanel.add( register);
newFrame.add(buttonPanel);
Image image =
     Toolkit.getDefaultToolkit().getImage("logo.jpg");
BoxLayout pictureBoxPanel =
          new BoxLayout (picturePanel, BoxLayout.X_AXIS);
picturePanel.setImage(image);
buttonPanel.add(picturePanel);
Box box = Box.createHorizontalBox();
picturePanel.setAlignmentY( Component.RIGHT_ALIGNMENT );
          buttonPanel.setAlignmentY( Component.RIGHT_ALIGNMENT );
          box.add( picturePanel );
          box.add( buttonPanel );
          userPanel = new JPanel();
          BoxLayout userBoxPanel =
                    new BoxLayout (userPanel, BoxLayout.X_AXIS);
          next.setForeground(new Color(105,0,105));
          next.setBackground(new Color(0,205,205));
          quit.setForeground(new Color(105,0,105));
          quit.setBackground(new Color(0,205,205));
          userPanel.add( next);
userPanel.add( quit);
userPanel.setBackground(new Color(0,255,255));
buttonPanel.add(userPanel);
newFrame.add(userPanel, BorderLayout.SOUTH);
JPanel mainPanel = new JPanel( );
          mainPanel.setLayout( new BoxLayout(mainPanel, BoxLayout.Y_AXIS) );
          mainPanel.add( box );
          mainPanel.setBorder( createCompoundBorder( ) );
          userPanel.setBorder( createCompoundBorder( ) );
          newFrame.add(mainPanel);
          newFrame.show();
          //add actionlistener to the "Quit" button
     quit.addActionListener( new ActionListener(){
     public void actionPerformed( ActionEvent event)     {
          CustomMachine application = new CustomMachine();
               newFrame.setVisible(false);
//add actionlistener to the "Next" button
     next.addActionListener( new ActionListener(){
          public void actionPerformed( ActionEvent event)     {
               if (logInstate == true){
                    String SearchStr1 = userid.getText();
                    String SearchStr2 = passwordField.getText();
               boolean flag=false;
               Customer cust = new Customer();
               for(int t=0;t<v.size();t++){
               cust = (Customer) v.elementAt(t);
                              if(     SearchStr1.equalsIgnoreCase(cust.getEMail()) &&
                                   SearchStr2.equalsIgnoreCase(cust.getPW()) ){
                         flag=true;
                    CustomerGUI custGui = new CustomerGUI();
                    logInstate = false;
                    newFrame.setVisible(false);
                    if(!flag){
                    JOptionPane.showMessageDialog(newFrame,
                    "No Such Contact Found!", "Search Result!",
                    JOptionPane.INFORMATION_MESSAGE);
                    userid.setText("");
                    passwordField.setText("");
               if (getRegisterstate() == true)     {
                    newFrame.setVisible(false);
                    CustomerRegistration application = new CustomerRegistration();
                    registerstate = false;
     } );//end call to addActionPerformed
public boolean getLogInstate() {
     return logInstate;
public void setLogInstate( boolean log){
     logInstate = log;
public boolean getRegisterstate(){
     return registerstate;
     public void setRegisterstate( boolean reg){
     registerstate = reg;
private class RadioButtonHandler implements ItemListener{
     public void itemStateChanged( ItemEvent event){
          if (event.getItem() == logIn)     {
               setLogInstate(true);
          else if(event.getItem() == register)     {
               setRegisterstate(true);
     public Border createCompoundBorder( ) {
Border raisedbevel = BorderFactory.createRaisedBevelBorder();
Border loweredbevel = BorderFactory.createLoweredBevelBorder();
Border redline = BorderFactory.createLineBorder(Color.red);
Border compound;
          compound = BorderFactory.createCompoundBorder(
raisedbevel, loweredbevel);
return compound = BorderFactory.createCompoundBorder(
redline, compound);
}

I'm not going to read that code.
When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.
And you didn't decsribe how you determined that it's not "passing the input to the file" (by which I assume you mean it's not writing to the file.
Most likely you forgot to call flush() or close() on your OutputStream or Writer.

TS1424 need help with error (0x80092013) windows, very frustrated...please help.

Very frustrated music lover but cant even sign in to my account without various errors occurring. ...the most recent onevhappened today...it seems Apple cant help me so please if anyone out there can I would be very greatful.

I am getting similar error... I check stuff you guys mention earlier... and I am still getting and error..
NewOrder class just have bunch of method get and set..
public class NewOrder
String customer_name;
int customer_number;
int quantity_order;
int unit_price;
*Get Methods.
public String getcustomer_name()
return customer_name;
public int getcustomer_number()
return customer_number;
public int getquantity_order()
return quantity_order;
public int getunit_price()
return unit_price;
* Set methods.
public String setcustomer_name(String name)
customer_name=name;
return customer_name;
public void setcustomer_number(int num)
customer_number=num;
public void setquantity_order(int quantity)
quantity_order=quantity;
public void setunit_price(int price)
unit_price=price;
public class NewHandlingShipping extends NewOrder
int quantityorder=10;
int id=001;
String myName="ABC Company";
int cost=10;
int ship=4;
public class handling
NewHandlingShipping cust_name = new NewHandlingShipping();
NewHandlingShipping cus_id = new NewHandlingShipping();
NewHandlingShipping quantity = new NewHandlingShipping();
NewHandlingShipping item_price = new NewHandlingShipping();
cust_name.setcustomer_name(myName);
cust_id.setcustomer_number(id);
item_price.setunit_price(ship);
quantity.setquantity_order(quantityorder);
ship=4+cost;
System.out.println("Your Order is $ " + ship);
Getting and error on the bold stuff..
error output...
NewHandlingShipping.java:22: <identifier> expected
System.out.println("Your Order is $ " + ship);
- Please Help..

File Adapter not working

OK.....
I've PM server on linux machine...I've deployed FileAdapter connector and restarted server...
I've deployed ComplexStructure tutorial but in BPEL Console I've this error for ComplexStructure Process:
Exception Name:
Error while creating activation job
Exception Description:
An error occurred while attempting to instantiate the activation agent class "oracle.tip.adapter.fw.agent.jca.JCAActivationAgent". The
exception reported was: "javax/resource/spi/BootstrapContext".
Where is my error?
Thank
Andrea

Hi Andrea,
This exception is occurring due to the fact that the J2EE Java Connector Architecture JAR file connector.jar in the Application Server CLASSPATH is of version 1.0.
Our JCAActivationAgent however needs version 1.5 of this JAR file (released with J2EE 1.4) since it uses the new JCA 1.5 inbound classes (such as BootstrapContext, ActivationSpec etc).
Please try to copy
{orabpel-home}/lib/connector15.jar
to
{j2ee-home}/lib/connector.jar
and try again. When we ship the product, this will not be necessary since the OC4J version then will support JCA 1.5.
-Bo

Mouse with PS/2 to USB adapter not working

I recently got a laptop and decided to switch from Ubuntu to Arch Linux, and apart from not having 3D acceleration for my graphics card, most things are working quite fine. Because I don't have 3D acceleration, one of the few games I can play is Unreal Tournament, but I don't want to play that with a touchpad, so I get a USB adapter for my PS/2 mouse, but it doesn't work for some reason.
It doesn't show up in lsusb, and the only clue I can get from dmesg is a single error saying it was "Unable to enumerate device".
Re-plugging it doesn't make any difference, nor does booting with it plugged in. Any clues as to why?
As a sidenote, I wasn't sure if I should make this thread here, but I consider a mouse hardware, and driver detection (as well as usb device detection?) has to do with the kernel. If I'm in the wrong place, please move this thread.

I am having a similar problem.I am using a Kinesis contour ps2 keyboard designed both for Mac and Windows system (132MPC). At $300 to replace it is not the sort of kit you just want to toss without good need. I have a kinesis and a belkin ps2-usb adapter. The Belkin worked for a very few minutes and then quit. The Kinesis never worked. I have downloaded and installed the Darwin PS2 kext file (ApplePS2Controller.kext) ...but that is for an x86 system so it can not help me...even if it would help me at all. Controller mate sees my keyboard (and the usb mouse I have converted through the adapter) but it does not recognize any input from the keyboard. I get hung at the 'type the key to hre fight of the left hand shift key' point. The keyboard is fine on windows machines...through ps2 port and via the ps2-usb adapters (both of them). I am quite happy mucking around in the bowels of my machine in su mode. Any suggestions??
-peter

Archive file with errors in sender file adapter not working! please help!

Similar Messages

Maybe you are looking for