Archive Source Files with Errors is Missing

Hi
I don't have this option or "Handling of Empty Files" available in ID on my Live or QA Servers although I do have on my Dev. They are all on the same SP and Patch Level 7.0 SP 14. Any suggestions ?
Thanks

Hi Thanks for the replies .. I found out there was a difference between the CIM Model between the environments, which has been now levelled. Folloing this I refreshed the CPA cache and I reimported the SAP BASIS 7.00 component but no joy. In the IR If I right click on the SAP BASIS BASIS package on my dev environment -> Display Support Package It displays SPS 9 and SPS 10. If I do the same on my QA env then it displays only SPS 9. This is surley where the issue is but I do not know how to rectify. Any ideas ?, is this because the CR content ?, (CIM Model, CR Content and XI Content are a little unclear to me). Is it an idea to do an export and import from my Dev to QA environment ?.
Thanks in Advance
Damien !

Similar Messages

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Directory for archiving files with errors

HI ,
My Scenario is file to RFC Asynch.
when ever the PI picks file from the source directory that file need to delete from the path and need to be archived to some other patch.
And if the file has wrong data it need to archive to error archive folder.
For this I used Archive processing in filesender adapter and I also used directory for archiving files with errors(for wrong data files).
Now the files are arching successfully in the given archive folder for successful messages. But the error files (wrong data which are throwing mapping error in MONI) are also archiving in the same archive folder.
But these error files need to archive in error archive folder.
How can I achieve this?
Thanks in Adv..
Vankadoath.

you can use raja's logic ..........in addition in second receiver do a simple mapping UDF to delete the file from the SUCCESS folder. otherwise your file will be archived in both the folder success and errror
see this code.
DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
*File f1 = new File("/usr/sap/XX/"+keyFileName1);*
*boolean success = f1.delete();*
*if (!success){*
*System.out.println("Deletion failed.");*
*System.exit(0);*
*}else{*
*System.out.println("File deleted.");*

Archiving files with errors

Hi all
I have been working on a File(FCC) to File(FCC) Scenario. I am working on PI7.0 with SP12. I would like to archive all the files with errors, for which the sender file adapter shows an option Archive Faulty source files. But I am not able to archive any of the error files. Help.sap.com mentions that this functionality works when a permanent error occurs.
I have tried out with all possible combinations and I am still unable to archive the error file.
Please help!!!
Regards
Kartik

Hi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit

Source file read error for sqldeveloper

While downloading SQLDeveloper, after almost 70%complete, i got an source file read error.
i've tried again to download but the page hangs on the license agreement page after clicking I ACCEPT.
Please resolve this issue.
Thanks in Advance
Using:
MS Win XP Home
Firefox 1.5.3
Tony Garabedian

sybrand_b wrote:
Why are you assuming utl_file works with binary files? It doesn't!It does in 10g, where file open mode B was introduced. But even with R mode you should be able to open DOC file. You might (or might not) have problem reading it:
SQL> declare
2      fh UTL_FILE.FILE_TYPE;
3      input_buffer varchar2(4000);
4 begin
5      fh := UTL_FILE.FOPEN('TEMP','Stats.doc','r');
6      UTL_FILE.GET_LINE(fh,input_buffer,4000);
7      DBMS_OUTPUT.PUT_LINE(input_buffer);
8      UTL_FILE.FCLOSE(fh);
9    exception
10      when others then UTL_FILE.FCLOSE(fh);
11 end;
12 /
ÐÏà¡±á                > þÿ                 2          4      þÿÿÿ    1
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿì¥Á €    ð¿             ¸
PL/SQL procedure successfully completed.
SQL> SY.

Wuala Validating source files with md5sums... wuala.tar.gz . FAILED

[r-c@r-c-laptop wuala]$ makepkg -si
==> Making package: wuala 2-20110707 (Sat Oct 15 13:17:49 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading wuala.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 303k 100 303k 0 0 56284 0 0:00:05 0:00:05 --:--:-- 684k
-> Found 0001-fix-loader-location.patch
-> Found wuala.png
-> Found wuala.desktop
-> Found LICENSE
==> Validating source files with md5sums...
wuala.tar.gz ... FAILED
0001-fix-loader-location.patch ... Passed
wuala.png ... Passed
wuala.desktop ... Passed
LICENSE ... Passed
==> ERROR: One or more files did not pass the validity check!
I tryed to install it mannualy and also using yaourt. Nothing works.

What I need to change just checksums or something else? Which checskums to use?
I tryed copy and paste during installation but doesnt work:
http://pastebin.com/MceCxbD3
http://pastebin.com/ziQKuE5t

How to fix the .pdf file with error "invalid annotation object"

how to fix the .pdf file with error "invalid annotation object"

As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

Cs4 opens cs3 files with errors

Here's a big heads up for anyone considering upgrading to cs4 - don't! I've been working on a cs3 project and decided to upgrade to cs4 for the extras in the 3D toolset. All the Adobe propoganda implies this can be achieved no problem, as did soemone on telephone tech support. Perhaps I didn't clearly ask 'can I open my cs3 file in cs4'. I can BUT the clips are very much 'out of synch. I'll lick my wounds and go back to finishing in cs3 but don't purchase cs4 if you think you can seamless import your sc3 project. Because it seems you very much can not!

Dennis,
Many thanks.
Date: Thu, 11 Feb 2010 05:21:44 -0700
From: [email protected]
To: [removed]
Subject: Premiere Pro cs4 opens cs3 files with errors
Jarrod,
As I've stated here in this forum, we're trying to transition Adobe technical support to a new organization and providing the best support we can to our customers. That being said, it is a long and sometimes painful process, which is why I am here on the forums at times to lend some support. This doesn't help you and you might not even care so...
Here's a couple of suggestions:
1. make sure your software is updated (Premiere Pro 4.2.1) by going to help>updates
2. clear your prefs - http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
3. try importing (ctrl-I) a CS3 project into CS4
Try these things and let me know how you make out. Also, it would be very helpful if you told us about your system and the specs. I've posted about the importance of 64-bit and lots of memory many times. You can find one link here: http://blogs.adobe.com/genesisproject/2009/03/64_bit_os_and_adobe_products.html
The future of Premiere Pro is 64-bit only: http://blogs.adobe.com/genesisproject/2009/10/its_official_64bit_is_the_futu.html
Beyond that if you'd like me to look into your case, please post your case # here or in a private message to me and I'll gladly look at it.
I sense your frustration and its understandable - give us a chance to help you.
Dennis
>

Amarok 1.4.10 from AUR plays flac files with errors

amarok 1.4.10 from AUR plays flac files with errors and i mean that it plays flac files but with strange behavior and of course the result is awful is there any chance to fix that problem. i have compile it with xine engine, can i use a different engine in PKGBUILD and how. i should write that i don't known much from configure a PKGBUILD by my own. with exaile and totem i have no problem i also play flacs with 24bit and 96khz audio quality. tnks for your time

Why not amarok 2.3 from extra?
Found this but its for 2.3: forum.kde.org/viewtopic.php?f=116&t=85428
looks like amarok just uses xine, which I don't know much about...
the 2.3 version depends on kde4, so you can run kde4 system settings and switch the multimedia backend between xine, mplayer, and gstreamer (need the aur packages first). I know mplayer should use ffmpeg to playback though.
Edit: looks like exaile and totem use gstreamer for playback
Last edited by 1LordAnubis (2010-05-19 16:19:09)

Archive Source Files with Errors is Missing

Similar Messages

Maybe you are looking for