Archive Utility's option "save in" doesn't work

Archive Utility's option "save in" doesn't work in Finder. Even I use its .prefPane and set it there…
I only want all my archives created with Finder are saved on the Desktop…
What's wrong with Mac OS X?

I think I found it. It's look like a bug in Mac OS X…
Look at my screenshot. There should be "archive-into" instead of "archive-info" (like in "dearchive-into")?

Similar Messages

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Hey Guys. I have a 1st gen dual 2.3 powerPC G5. I just recently upgraded my OS to Leopard 10.5. I cannot for the life of me, get FlashPlayer to work. I Downloaded and installed the archived 10_1r102_64 version, but it still doesn't work. Help?

Hey Guys. I have a 1st gen dual 2.3 powerPC G5. I just recently upgraded my OS to Leopard 10.5. I cannot for the life of me, get FlashPlayer to work. I Downloaded and installed the archived 10_1r102_64 version, but it still doesn't work.
Everytime I click on a video it says I need to update to the newest version of flash, but my computer doesn't support the updated version. So I feel like I'm in a Catch-22.
Any suggestions?

Jay, you may very well be up a creek without a paddle.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/
If it in fact says you do have 10.1.102.64, & some sites say you need higher, it is a catch 22.

Can't create Smart Collection, Save-Button doesn't work

i have the Problem that i can't create Smart Collection, the Save-Button doesn't work, the Smart-Collection Window stays open and nothing happens when i click the "save" button!
i use CC with a new installed W8 and all is up-to-date.
Its a strange thing. Please Help me.

Just to clarify, Photoshop CC has not been released yet. It will come out on June 17.
What you have now is Photoshop 13.x as per the subscription model (»Abo«) and it's called Photoshop CS6. When Photoshop 14.x is released on June 17, then it will be called "CC".
It's not clear—at least to me—which images, if any, you have selected in Bridge when you hit the »Speichern« (Save) button.
Remember that a Collection is nothing more than a saved search, i.e. a saved collection of selected search results (hits).
Could you elaborate on what it is you want to save as a collection?
Incidentally, the Adobe Bridge forum is here:
http://forums.adobe.com/community/bridge?view=discussions

Options pulldown menu doesn't work - nothing comes up

options pulldown menu doesn't work - nothing comes up, no matter how long I wait.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

Why does search option in history doesn't work? It does not display any sites I've been to.

I enter history, type a name of a site I've been to in 'search' or 'find' field (I'm using polish version so I don't know the exact name of that field) and it does not find anything. I haven't cleared my history, it's all there when I open 'today', 'yesterday' etc. tabs. Only finding it using search option doesn't work.
It used to work fine now it doesn't. I haven't installed anything.

Make sure that you're not running Firefox in Private Browsing mode.
https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select:
Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose:
Tools > Options > Privacy
choose the setting Firefox will: Use custom settings for history. Deselect:
[ ] "Permanent Private Browsing mode"

Scrollable content (pan option) with hyperlink doesn't work

Hello, I'm trying to layout a page to scroll horizontaly with an hyperlink to a web site. I've followed the steps given in the digitalpubsuite_help.pdf (Page 51 - Last updated 1/25/2012).
After grouping the image and the hyperlink, I cut it and I paste it into my container frame, but it's there when my container frame doesn't show me the Pan option in the folio builder (it's desactivated) and it remains with the option Web Content active.
So, I tried to do the same thing, but using a button instead of an hyperlink, but it doesn't work either. And in this case I have the message 'content generation error: invalid URL for web content overlay' when I try to update my article.
Could somebody help me to figure out why this is happening? What am I doing wrong? Thank you

No, it takes this property (web content overlay) once I paste the content into the frame. I also noticed that when I group my image with the hyperlink all my group become an hyperlink. I've already reseted it as you say but it didn't work!!!!

Option System recovery doesn't work

Notebook Lenovo G50-30 (80G0) - bought a month ago. (Windows 8.1)
Few days ago sound stopped work suddenly. I suspect that this is associated with MS Updates, which was set as automatic. I suspect because this notebook is not my. But now I have it for repair. I noticed that system work abnormally, when I try to use some function from control panel it doesn't work and control panel stop responding. For example update settings.
I decided restore system to factory setting, using NOVO key and option System Recovery. Unfortunately when I choose this option nothing happens and computer loading operating system as usually. I try use software OneKeyRecovery and after it sytuation is the same.
Important information is that system partition C was divided into two parts/partitions. And it was my first clue that something is wrong with ID partitions, but maybe i'm wrong. I change it and set one C volume.
Diskpart shows 5 volumes (0-4), the last one is the recovery partition like below:
On computer: LENOVO-G50
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C Windows8_OS NTFS Partition 450 GB Healthy Boot
Volume 2 WINRE_DRV NTFS Partition 1000 MB Healthy Hidden
Volume 3 SYSTEM_DRV FAT32 Partition 260 MB Healthy System
Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Partition 5
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 486004490240
Volume ### Ltr Label Fs Type Size Status Info
* Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Can someone help me? How can I restore factory settings?

hi mehowg,
Can you try to create a recovery drive and use it to Refresh or Reset Windows 8/8.1.
If that doesn't work, you can try the folliwing to reinstall the OS:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One)
2. After you set Boot Mode to UEFI in the BIOS, follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows 8.1 on the G50-30 (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows).
Note:
The above method (Steps 1-2) will only re-install Windows (you will need to reinstal the drivers manually from the G50-30 drivers page)
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I´d like to export my iphotos macbook pro.everything worked right when I installed impression for iphoto but when I installed impression 2 for iphoto and I restared my computer the export option in iphoto doesn´t work.Can somebody please help me ?

I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank you

Are you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned.

Can't open jpg attachments. Options/Applications setting doesn't work.

jpeg attachments won't open in email. Window opens asking what to do and what pgm to use but once selected it just saves it to my download file anyway. I've updated FF Options/Applications but it made no difference.
== This happened ==
Every time Firefox opened
== Since I started using Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Welcome to the discussions!
The fact that it worked, but it doesn't anymore means something has happened to interrupt this procedure.Remember if there was an update or something done that will explain it. As for the workaround I always saved as .RTF to avoid such troubles and it hasn't (yet) failed me.

SaveAs() method doesn't work for PDF file

I used the script below to generate a PDF file. When I ran it, no error occurred but no PDF was generated either
var pdf = new File("E:\\STWWEB1\\CDLG_ILL\\temp\\jpeg\\640\\1.pdf");
docRef.saveAs(pdf);
Does anybody know what's wrong?

PDF needs to have a new instance of the PDFSaveOptions created. Look at the JS Reference
PDFSaveOptions
Options for saving a document as an Adobe PDF file, used with the saveAs method. All properties are optional.
Saving to PDF format
// Saves the current document as PDF to dest with specified options
// dest contains the full path and file name to save to
function saveFileToPDF (dest) {
var doc = app.activeDocument;
if ( app.documents.length > 0 ) {
var saveName = new File ( dest );
saveOpts = new PDFSaveOptions();
saveOpts.compatibility = PDFCompatibility.ACROBAT5;
saveOpts.generateThumbnails = true;
saveOpts.preserveEditability = true;
doc.saveAs( saveName, saveOpts );

Sort(java.util.LinkedList java.lang.Object ) doesn't work

Why doesn't this work?
LinkedList<Object> sysPropsKeys = new LinkedList<Object>(System.getProperties().keySet());
Collections.sort(sysPropsKeys);
cannot fnd symbol
symbol : method sort(java.util.LinkedList<java.lang.Object>)
location: class java.util.Collections

I will admit to not having Java1.5 installed on my machine. Haven't yet had the chance to play with generics, but the above DOES work in 1.4, and SHOULD work in 1.5
Maybe I'm naive but, System.getProperties() returns a Properties object right?
According to the API: http://java.sun.com/j2se/1.5.0/docs/api/java/util/Properties.html: Each key and its corresponding value in the property list is a string.
All the keys SHOULD be strings.
AFAIK string are comparable, and shouldn't throw class cast exceptions
Thus the keys returned from getProperties SHOULD be comparable, and compatible for comparision.
Ok, I can see your point in that some hackers abuse the Properties class by putting non string keys/values into the Properties Map. In that case the code would become more like your above. I'd probably still go with a TreeMap though, rather than a sorted list of keys. Most time you want the keys, you want the values as well. So if the intention is to print out a sorted list of system properties, and their values, keeping it in a map is best.
Just my 2 cents,
evnafets

Command line option "-save-to-folder" stopped working after last update: Any workaround?

Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
Typical format was: firefox url -save-to-folder filename
When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?

[http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
-recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com]

The preview option in FCK doesn't work when using trought an external app!

Hello everyone!
I have an issue with the FCK-editor when using in an external application.
We are executing the “WCM_EDIT_DATA_FILE” service to launch the FCK contributor application in a portal (Webcenter) so we can edit datafiles. The preview option (preview butto) does not apply a region template and the content is shown in the same order as defined in the region definition. Viewing the same datafile trough Site Studio I can see that the preview option applies a region template.
I've compared the links but I am not getting anywhere.....
The links for the preview are:
Via the portal:
http://MyServer/vcc/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=DF_NEWS_BERLIN_8&dID=765&wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1276003853183&WCMPopupId=POPUP09875462424653607178
Via Site Studio:
http://Myserver/VCCPOC/index.htm?wcm.contributor.mode=false&IgnoreContributorOnly=true&previewId=1275983448108&WCMPopupId=POPUP07808631203986127290
I can see that the portal link has the same parameters as the Site Studio link and some more. I even tried adding a region template in the url by adding my template as a parameter like this "&templateDocName=RT_BOUND_DETAIL_VIEW" just to force it but without any luck. The same goes for the "view differences"-button in the FCK editor.
Has anyone had this problem?
Thanks

Hi Stijn,
Here is the link to the SS-services:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10615/c11_ss_services.htm#insertedID0
And here is the link to the CS-services:
http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/services_reference_10gr3en.pdf
The name of the service that creates new data file is CHECKIN_NEW_FORM.
Saving the file from the FCKEditor makes the browser window "greyed out" so for the time being we are hitting the "go back"-button in the browser to return to the portal... as we open the editor in the same window as the portal. However, there must be another solution as this is fare away from user friendly!
Let me try to answer some of your questions:
- Are you also using the Site Studio publishing functionality (we will not)
No, we are not either.
- where will your site design be done (we'll try to do as much as we can in WebCenter to keep it all in one place; we might even just output XML with our templates from SS, and transform it in WebCenter using different "templates")
We are also planning to have it all in WebCenter. We are using SS for creating region templates and subtempalates used in the portal (Webcenter/ADF) for showing the same data files in different ways. That means that we also have elements, region definitions, placeholders and so on in the SS.
- what are you doing with inline images in the FCKEditor (we want contributors to be able to upload there images easily from the Editor, without the need to browse to UCM)
Well, for the time being the contributor must browse the some images from the CS because the images must have a certain height and width... so that is our way of controlling that the user is choosing from the approved images. When it comes to images in the text the contributors can add as many images as they want that are not from the CS. They can just copy/paste them in the editor from whatever location they want.
- is it correct that the metadata tab cannot be used in combination with profiles defined in UCM (see other thread WebCenter Content
I've heard that before so my guess is that it's true. My question then is how do I do to hide the metadata tab if I do not use it?
- will you be using the ctrl-shift-F5 functionality to edit content, or just create a link to the WCM_EDIT_... service in a popup window?
We create a link to the WCM_EDIT_... service that opens in the same window as the portal.... but as I mentioned earlier that is not the most user friendly solution so we probably must change that....
Now back to my problems:
I know why the preview trough the portal and the site studio differs.
The services that are used when previewing content trought the SS are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_GET_PAGE
LOAD_DOC_ENVIRONMENT
The services that are used when previewing content trought the portal are:
SS_SET_PREVIEW_ELEMENT_DATA
SS_QD_GET_RENDITION
LOAD_DOC_ENVIRONMENT
The SS_GET_PAGE actually shows a page in SS and as soon as there is a region template attached to the page you are able to see the content the way you want. That is not the case then calling the SS_QD_GET_RENDITION service. So my question is if there is a workaround where I can force a region template to be used con conjunction with the SS_QD_GET_RENDITION service?
Anyone? All ideas are really appreciated!

Archive Utility's option "save in" doesn't work

Similar Messages

Maybe you are looking for