Archiving COPA1 deleted Database space is not the same as what SQL thinks.

I am currently archiving using the object COPA1_xxxx.
I have complete 2 fiscal years worth of data.
The spool files that are produced at the end of the archive runs (write or del) states that i have removed 115GB alltogether.
When my DBA produces a report in SQL server, it states i have only removed 15GB.
I looked in DB02 at the CE1 table (475GB) and there was only 16GB of unused space.
I cannot work out why there is a big difference from what SAP is displaying to what SQL is displaying.
Canyou please help?

The space gained while archiving is not immediatly free to be used for any kind of data. In general it is still allocated for the same data, until you  reorganize your database.
However, you said that the size of unused space in DB02 at the CE1 table  is still just 16 GB.
When you do the analysis with DB02, set the cursor onto the CE1xxx object and click the button table columns. There you will see a column "Last analyzed".
Is this date after the archive run, or from before?
IF it is younger than the archiving date, I would suggest that you check the table with SE16 to see if the records you have archived are really have been deleted.
I saw cases, where the archiving was done as productive run, but deletion was done with variant for test run.

Similar Messages

  • Space bar not the same

    I'm just curious, is anyone else's 15" MBP's space bar "press" differently than the other keys? All the other keys are real quiet, but when I hit the space bar it lets out a much louder pressed noise. This is really annoying when you're typing a long sentence. Is this something that Apple just dropped the ball on, or is there something wrong with my specific keyboard?

    on mine it may sound just a little bit different, since it's the largest key on the keyboard.
    and I use the moshi clearguard keyboard protector which also reduce the sound of typing.
    and I'm not a very fast typer just average so I don't press that hard on the keys.
    I don't think yours should be any different.
    best check out the demo unit by applestore.
    hopefully it's not very far from you.

  • Time machine space questions, not the same as Activity Monitor

    Hello
    I am new here and kindly ask your thoughts on what I am seeing.
    I have a 13" MacBook Pro early 2011 with OS 10.7.5
    Earlier this year I tried an upgrade to a new OS and experienced a failure that required me to make a visit to the Apple store.
    I believe they reinstalled the OS and if I remember correctly I just did a recovery with the Time Machine backup I had.
    While that backup was not very recent, yea OK I get that was stupid, what was odd was that not all my files were backed up.
    I lost a significant number of files from April 2013 until the time of the failure in 2014, for reasons I have no clue as to why.
    My Time Machine does not have any excluded files as far as I can tell.
    So my first question is:  Can anyone help me understand what may have happened and how to counter that?
    Then yesterday I decided to invest in a new backup external drive.
    During the process of setting it up and doing the 1st Time Machine backup on that, I noticed the following:
    In Activity Monitor under the "Disk Usage" tab shows the Macintosh HD as using 258 of 319 GB, and then selecting my user name it shows using 578 of 639 GB.
    When I did the backup with Time Machine it backed up approximately 250GB.
    I thought Time Machine backed up the entire HD.
    What is the difference between the Macintosh HD space and the user space in terms of usage and total?
    Should I be worried or visiting the Apple store again?

    OK, done.
    I created a text.txt document containing the words "Version 0". I saved it to the Desktop, closed it and selected "Back Up Now" from the Finder.
    Waited for that to complete, opened the test.txt document again, modified it by adding the words "Version 1", saved it, closed it and selected "Back Up Now" again.
    Repeated that twice more, so the end result was a Text.txt containing the words "Version 0", "Version 1", "Version 2", and "Version 3".
    I expect that I should now have three versions from which to choose to restore, all from different times, plus the latest one still on the Desktop.
    Creation and backups now complete, so the next step was restoration:
    From the Finder, I used "Enter Time Machine" and verified that I had four different recent times from which to choose. I chose the original text.txt document and elected to "keep both files". It restored the original, which I opened and verified it contained nothing but the text "Version 0".
    I repeated this for the subsequent version. I opened that one and confirmed it contained the words "Version 1".
    I repeated this for the subsequent version. Now I have three restored text.txt documents, plus the one on the Desktop.
    I opened all four text.txt documents and stacked them as shown in the following screenshot:
    Conclusion, no surprises that I can determine.
    Is this what you had in mind, or was there something I did that was different from what you need?

  • Print Size is not the same as what I see in my project in Flash CS5

    Alright, I'm doing a project for Biology 11 and I need to create a flipbook for the stages of a Lysogenic Infection.. This is what my front page is going to look like.. [img]http://gyazo.com/5c6257e742826002fcfea66b3efc5813.png[/img] But, whenever I print the document it doesn't come out in the size that I have it set as, it just comes out almost covering up my whole white piece of paper.. and I need it flipbook sized. I have the width set at 3.99 inches and the height at 3.4 inches.. I want it to be flipbook size, so when I print it out, it's just a tiny portion of the white piece of paper that contains my drawings and stuff.. any idea what I should do? I want it to match the exact size of the white that I have in Flash CS5.

    Hi,
    It may be because, Scale to fit option may be selected in your printer options and hence may be the scaling. Just make sure that this option is not selected in your printer properties dialog.
    Thanks!
    ps: please mark this post as Answered if this is of help to you

  • Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

    Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
    Here is my machine info.
    iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
    Safari Version 5.1.7
    I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
    Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
    I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
    Any help or advice is apprecaited.  

    BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
    About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
    The time it happened was sometime between 14:30 and 14:35
    I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
    Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
    1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
    1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
    1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

  • A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

    When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
    Any ideas?

    I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
    Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
    From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
    The problem is dependent on the state of both settings.
    The spacebar in Mail "works" if I have either of the following setting combinations:
    Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
    Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
    Other combinations FAIL
    Keyboard: smart quotes ON, Mail: Check spelling NEVER
    Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
    Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
    Thanks.
    Todd Smithgall

  • I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

    I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

    5GB is typically not enough space to download a movie.  Often, movies take from 3 - 5 GB to begin with.  The only option you have is to delete more things from your iPad.  You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

  • Data Guard: standby archivelog files not the same as the primary archivelog

    From reading the Data Guard doco, one gets the impression that that the standby redo archive logs are just a mirror of those from the primary, that the shipped and applied archived redo logs from the primary are what end up in the standby archive directories.
    However I have noted that the files are not the same (md5sum is different), which is concerning as using Oracle's archive log naming recommendation, the files have identical names.
    Does this mean that the Standbys redologs can not be used as a source of redo logs if one had to restore using a backup of the primary database?
    i.e. Can you recover using an RMAN backup of the primary, and redo logs from the standby?

    Hi MSK, I agree, that's exactly what I thought. I'm confused though why the logs do not match. Perhaps it is just metadata in the log that has changed, not redo data.
    Anyone have any knowledge on why the archivelogs are different on the standby to those on the primary?

  • HT204053 My Icloud account number is not the same as my Apple Account  how can I change my I cloud account  to match my apple . None of my photos  are going over to my I cloud

    My Icloud ID is not the same as my Apple ID how can I chamge my Icloud ID to match.  Non of my photos are streaming over to my Icloud  and I have been paying extra for additional storage space.

    Start here, change your country if necessary and go to manage your account and request another email.

  • HT204053 Seems my iCloud password is not the same as my iTunes.  Where do I go to reset my iCloud password?  I cannot access anything when prompted to put in my iCloud password because I do NOT KNOW it.  Thanks!

    Seems my iCloud password is not the same as my iTunes.  Where do I go to reset my iCloud password?  I cannot access anything when prompted to put in my iCloud password because I do NOT know it.  Thanks!  I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.

    Do the following:
    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • Why are my iCal events not the same across views?

    Help!  I've been editing my iCal in Month view and everything looks great... but then I look at the day view (or week, whatever) and it's not the same.  For example, in Month view for July 2 - I have one event scheduled from 8:30-noon.  Then I look at the day view... and there are 8 different events!  Most of them duplicates of different things that I had at one time or another deleted or changed.  Why didn't the "clean up" work that I did in the month view carry over to day or week view?  In fact the opposite, there are more things in day or week views than I ever created.
    Recently upgraded to Lion from Snow Leopard.  Recently changed from mobileme to iCloud.  I only have iCal set to my iCloud account (no "on my mac" iCal calendar data). So the problem I see when editing on my MacBookPro is also seen when logged into iCloud directly via Safari and on my iPhone, iPad, etc.  At first I thought this was an iCloud syncing error because I only noticed the difference on my phone (list view)... but when I went back to my MacBookPro I realized the problem exists there too... so doesn't seem to be a syncing error, but rather a "view" error... then the "problem" is mirrored everywhere.
    I've tried "refresh" and "refresh all" from the Calendar drop down menu.  This does nothing to help the problem... not that I really expected it would.
    Thanks for any help you can provide.  I'm going crazy!
    Mac OS X 10.7.4; iCal 5.0.3

    Fixed my own problem.  Ultamately a user error but tied to the many threads about the month view defaulting events to "all day" vs. hourly increment.  I knew that was the case, so when editing events from month view I made sure to add/change the time, but negected to look at "To" date.  If my event was for an hour, simply adding the hour pushed the day to span across dates so the event was really 25 hours.  Looked OK in the month view (just showed as a dot) but the day and week were all filled and casued the event to appear twice on the second day in list view (iPhone).  In the case of repeat events, sometimes "To" date ended up as the end date for the repeat cycle... which really messed every thing up... I believe causing what looked like duplicates, etc.

  • Why files in Lightroom mobile and files in the creative cloud not the same? idea-  one place(stored date) for all application ??????

    Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

    Lightroom Mobile is not a cloud storage service. You shouldn't treat it as a way of backing up your files. You are merely storing Smart Previews of your files in the cloud space, high-quality JPEGs of your files regardless of their original format on your desktop. The point is that they are there so you can continue editing them in a Lightroom-like environment even while away from your desktop/laptop computer. The files in Lightroom Mobile can only be used in Lightroom Mobile.
    This is very different from what is offered by the Creative Cloud storage, which can be used to synchronize your files between any device (that can support the individual files).
    The vast difference in how each service works and its intended use is why they are separate.

  • RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

    Hi Experts,
    RSA1Source System (Context Menu) Check
    I am getting the below error
    <b>‘The BW IDoc type ZSBA011 is not the same as the source system  IDoc type ZSBD012 ‘              </b>                              
    What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
    Where should i check to correct the error
    Thanks

    Hi,
    Did you do a system copy for BW ?
    Try a restore (rightclick on your source system) in most cases this will solve the problem.
    If not check the notes below:
    184322  Procedure after DB copy of BW source systems 
    886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    325470      Activities after client copy in BW source systems
    325525      Copying and renaming systems in a BW environment
    184754      Procedure after BW database copy
    184447      Building a BW-system landscape
    184971      Notes on BW source system connections
    140276      Error in source system assignment
    524554      Storing destinations in the BW environment
    538052  Maintenance of Myself destination in BW
    Regards, Patrick Rieken
    Message was edited by:
            Patrick Rieken - BI-Formance B.V.

  • Is it possible to delete an Effect sitting on the same effect plugin c++ code?

    Hello,
    Let me explain My problem.
    I have developing an Effect plugin, "MyEffect" .
    This effect has one UI + defualt "About" and "Reset" buttons + one "Remove " ( Which is a "Options..." ) button.
    The "Remove" button functionality is: When I click on "Remove" button, the "MyEffect" effect should remove from the Layer/Composion.
    The plugin EntryPoint function is called with a command "PF_Cmd_DO_DIALOG" clicking on "Remove" button. Here I want to remove this "MyEffect" effect from Layer/Comp.
    So, My question is, Is it possible to delete/remove an effect sitting on the same effect plugin c++ code?
    Hope, you understand the problem!.

    Hi Shachar,
    Thanks for your reply!
    >>     that separate AEGP of ours?
    Not getting the above line in your prevoius msg.
    Actually My question is, "Is it possible to delete an Effect sitting on the same effect plugin c++ code?", wrong.
    What exactly I want is...
    I'm developing an effect plugin, that execute 2 scripts.
    -     one script is for applying an effect ( we are discussing this issue in onother thraed, you already knew it. )     and
    -     other script is for removing an effect
    When I click on "Remove" button, the second script should executes and it removes the applied effect from the Layer/Comp.
    I'm just guessing that, 3 plugins are required to solve this problem.
    Plugin1:  Create UI + call plugin2 + call plugin3
    Plugin2:  Execute the script1 ( i.e., apply the effect )
    Plugin3:  Execute the script2 ( i.e., remove the effect )
    am I correct?

  • Lightroom image not the same as PS image

    LR4 image (no adjustments other than initial rendering)  is dull compared to opening same raw image directly into PS (CS5) via ACR. If I set monitor profile to sRGB  there is no problem,  suggesting that I had a corrupt profile.(According to several forums I read).  I have redone my color calibration and restarted my computer.  The problem exists.      
    Both ACR and LR are using Adobe Standard for the camera calibration, 
    Using Version 2010 for both was no different than using 2012 for LR and 2010 for Photoshop
    Color Space,ProPhoto is the same,  and all other menu items are set correctly ,  according to LR Forums
    Please help!  Jeannie

    "So, what method are you using to tell software which monitor profile to use? Is it Windows? If so, what version of Windows? Are you using the gamma loader that came with the profiler software or are you asking Windows to do it for you using its built-in means?"
    Thanks for your interest in my situation.  To answer your question:   I select the correct monitor   and icc profile deep within the Control Panel of Windows 7.  I don't understand the second sentence.  Eye One Display 3 software is what I use to create custom monitor profiles.  If, on the other hand,  I revert back to a canned profile I select one of  the profiles that came with  the  MultiProfiler that came with my NEC PA241W.      "Gamma Loader"  is not something that I am familiar with.   The closest I come to understanding you is that when I have a choice  I select  Gamma =  2.2

Maybe you are looking for

  • Aging Report Group By

    Hello, Is it possible to group all of the results in this query by BP Code?  I have applied the Group BY but it is still showing each line for each BP, rather a total cumulative value for each BP.  ANy ideas on how to get one result for each BP? Than

  • Best way to store documents and images in a web application

    All, Which is the best way to store the documents, is it Oracle DB or file system or Virtual Directory Mapping in weblogic. We are working on a Internet based application into CRM domain, there is a requirement where user can upload and download the

  • Query Execution problem in SAP BI Portal

    Dear all I have a query which I want to execute in BI portal. For this , I opened up BEx Query Designer and from there pressed the "Execute" button which opened the login screen in my browser.  I successfully logged in and provided inputs for the que

  • Components invalid in Standard Edition

    Hi all      have to upgrade from 11.2.0.2 to 11.2.0.4 and pre-upgrade tool indicates that Oracle Olap Api component is invalid.  Since this option is not availabe in Standard Edition, wanna know if I can safely ignore it or should I try to de-install

  • NO ROOM TO ADD ANOTHER HDD IN HP 500-199

    There are 4 SATA plugs on motherboard but no room for 2 HDD? This question was solved. View Solution.