Are cp file extensions created with Captivate 4 compatable with Captivate 8?

Hi there
I believe you will need a copy of version 5 or 6 to open the CP with and convert to a CPTX. Then you can open using 8.
Additionally, you may discover that things become a bit mangled during the upgrades. Many have not gone smoothly and have forced a rebuild of the project.
Cheers... Rick

Similar Messages

What are the differences of creating a physical standby database with ASM?

I want to create a physical standby database for my 10g(10.2.0.1) database. But it is using ASM. Is it possible to create a standby database for a database using ASM?
What are the differences of creating a physical standby database with ASM?

tell us what your research shows and we'll try to
validate it. I am simulating Oracle ASM on a PC and I want to try
DataGuard on it now. So I am trying to create DataGuard
on an ASM system. The purpose is only learning and test.That's telling us how you are researching, not what you have observed.
Your research could have included looking at the documetation, and you might have found http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#sthref1642
which discusses exactly what you are looking for.
Message was edited by:
Hans Forbrich

Where are my file extensions?

Hi All,
I have two iPhoto libraries (one in the default package and one in a new package), and one of them shows my file extensions and the other does not.
In my default library, all of my pictures are in the library because iPhoto sucked them off my memory cards. In this package, the title field (which is the field shown below the pictures, if you want) has the filename *with extension*.
In my second library, all of the pictures were imported from an existing file structure on my hard drive. In this other package, all of the titles are missing the file extension!
I cannot find any setting that changes the behavior of what goes into the title field, but I would very much like to see file extensions in all of my libraries. Does anyone have any thoughts on how to accomplish this?
Merry Christmas (If that's your persuasions)
nathan

they are in your temporary internet files cache and they are
.swf files.

On ESR 17, the DOCX attachments in my e-mail (I use Optonline) ignores the file extension. (my e-mail works fine with IE). This was fine with Firefox 10.0

I have been using Firefox for a long time. I installed ESR 17 recently. Since then I can't open DOCX files in my e-mail (optonline.net). It comes up as "eFax Messanger files". It obviously does not reconginze the file extension because whe i try to open it using Word it reads it as if it was a text file. If I use IE I have no problem opening the same attachment in my e-mail. I know atleast two other people who have the same problem.

See:
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.org/kb/Managing+file+types
Try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

Is adobe captivate 7 compatable with OS X Yosemite?

I have a new Adobe Captivate 7 and after I installed it, the icon will bounce 3 or 4 times and then close. it will not run at all. I have a Macbook pro retina. Is adobe captivate compatable with OS X Yosemite?

HI Phillip,
Captivate 7 does work with Yosemite but it is not tested with Restina Display. Can you try to install Captivate 8 trial version and see if you are getting the same issue?
Regards,
Mayank

Move files and create unique name something wrong with my script

Can you see where I might be going wrong here?
Just trying to create a unique name if something exists.
In English.
Move file to the destinationFolder
Item exists in destinationFolder > Move file in the destination folder to the fake Trash > If it exists in fakeTrash too then give it a new name an ending of_a.psd then out it in the trash
Once thats done move start file to the destination folder.
Currently when the file exists in the destination folder and in the trash, I get the prompt then the error
error "System Events got an error: Can’t get disk item \"NN_FR10WW06290PK3LE.psd\"." number -1728 from disk item "NN_FR10WW06290PK3LE.psd"
set fileMatrix to {¬
          {folderName:"BHS", prefixes:{"BH", "SM", "AL"}}, ¬
          {folderName:"Bu", prefixes:{"BU"}}, ¬
          {folderName:"Da", prefixes:{"ES"}}, ¬
          {folderName:"Di", prefixes:{"DV"}}, ¬
          {folderName:"Do", prefixes:{"DJ", "RA"}}, ¬
          {folderName:"In", prefixes:{"GT", "CC"}}, ¬
          {folderName:"Fr", prefixes:{"FR"}}, ¬
          {folderName:"No", prefixes:{"NN"}}, ¬
          {folderName:"Ma", prefixes:{"MA", "MF", "FI", "MC", "MH", "MB"}}, ¬
          {folderName:"Pr", prefixes:{"PR"}}, ¬
          {folderName:"To", prefixes:{"TM15", "TM11", "TM17"}}, ¬
          {folderName:"Wa", prefixes:{"WA"}}, ¬
          {folderName:"Se", prefixes:{"SE"}}}
tell application "Finder"
          set theHotFolder to folder "Hal 9000:Users:matthew:Pictures:HotFolderDone"
          set foldericon to folder "Hal 9000:Users:matthew:Pictures:Icons:Rejected Folder Done"
          set fakeTrash to folder "Hal 9000:Users:matthew:FakeTrash"
---here
          repeat with matrixItem in fileMatrix -- look for folder
                    set destinationFolder to (folders of desktop whose name starts with folderName of matrixItem)
                    if destinationFolder is not {} then -- found one
                              set destinationFolder to first item of destinationFolder -- only one destination
                              set theFolderName to name of destinationFolder
                              repeat with aPrefix in prefixes of matrixItem -- look for files
                                        set theFiles to (files of theHotFolder whose namestarts with aPrefix) as alias list
                                        if theFiles is not {} then repeat with startFile intheFiles -- move files
                                                  try
move startFile to destinationFolder
                                                  on error
activate
                                                            display dialog "File “" & (name ofstartFile) & "” already exists in folder “" & theFolderName & "”. Do you want to replace it?"buttons {"Don't replace", "Replace"} default button 2 with icon 1
                                                            if button returned of result is "Stop"then
                                                                      if (count theLastFolder) is 0 thendelete theLastFolder
                                                                      return
                                                            else if button returned of result is"Replace" then
                                                                      set fileName to get name ofstartFile
                                                                      if exists file fileName indestinationFolder then ¬
                                                                                try
--next line moves existing file to the faketrash
move file fileName of destinationFolder to fakeTrash
move file startFile to destinationFolder
--if it already exists in fake trash give it a new name then move that file to fake trash
                                                                                on error errmess numbererrnum -- oops (should probably check for a specific error number)
                                                                                           log "Error " & errnum& " moving file: " &errmess
                                                                                           set newName to mygetUniqueName(fileName,fakeTrash)
                                                                                           set name of fileNameto "this is a unique name"-- or whatever
                                                                                           set name of fileNameto newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
                                                            else -- "Don't replace"
                                                                      if not (exists folder "Hal 9000:Users:matthew:Desktop:Rejected Folder Done") then
                                                                                set theLastFolder toduplicate foldericonto desktop
                                                                      else
                                                                                set theLastFolder to folder"Hal 9000:Users:matthew:Desktop:Rejected Folder Done"
                                                                      end if
                                                                      delay 0.5
move startFile to theLastFolder with replacing
                                                            end if
                                                  end try
                                        end repeat
                              end repeat
                    end if
          end repeat
          try
                    if (count theLastFolder) is 0 then delete theLastFolder
          end try
end tell
to getUniqueName(someFile, someFolder)
     check if someFile exists in someFolder, creating a new unique file name (if needed) by adding a suffix
          parameters -          someFile [mixed]: a source file path
                              someFolder [mixed]: a folder to check
          returns [list]:          a unique file name and extension
          set {counter, suffixes, divider} to {0, "abcdefghijklmnopqrstuvwxyz", "_"}
          set someFile to someFile as text -- System Events will use both Finder and POSIX text
          tell application "System Events" to tell disk item someFile to set{theName, theExtension} to {name, name extension}
          if theExtension is not "" then set theExtension to "." & theExtension
          set theName to text 1 thru -((length of theExtension) + 1) of theName -- just the name part
          set newName to theName & theExtension
          tell application "System Events" to tell (get name of files of folder(someFolder as text))
                    repeat while it contains newName
                              set counter to counter + 1 -- hopefully there aren't more than 26 duplicates (numbers are easier)
                              set newName to theName & divider & (item counter ofsuffixes) & theExtension
                    end repeat
          end tell
          return newName
end getUniqueName

There are numerous errors in your script, and it's a large script so there might be more, but these are the standouts for me:
At line 48 you:
                                                                      set fileName to get name of startFile
which is fair enough - you then use this to see if the file already exists in the destinationFolder. However, if it does the logic about how to deal with that is flawed.
At line 56 you catch the error:
                                                                                on error errmess number errnum -- oops (should probably check for a specific error number)
                                                                                          log "Error " & errnum & " moving file: " & errmess
                                                                                          set newName to my getUniqueName(fileName, fakeTrash)
                                                                                          set name of fileName to "this is a unique name" -- or whatever
                                                                                          set name of fileName to newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
so let's focus on that.
56: catch the error
57: log the error
58: generate a new unique filename
59: change the name of fileName to some other string
Hang on, wait a minute.... we already ascertained that at line 48 you defined fileName as a string object that indicates the name of the file. This is just a string. It's no longer associated with the original file... it's just a list of characters. Consequently you cannot set the 'name' of a string, hence your script is doomed to fail.
Instead, what I think you want to do is set the name of the startFile to the unique string. Files have filenames, and therefore you can set the name.
You have a similar problem on line 64 where you try to 'move file filename to fakeTrash'. fileName is just a string of characters. It isn't enough to identify a file - let's say the file name is 'some.psd'. You're asking AppleScript to move file some.psd to the trash. The question is which some.psd? The one on the desktop? in your home directory? maybe on the root of the volume? or maybe it should search your drive to find any/all files with that name? nope. None of the above. You can't just reference a file by name without identifying where that file is. So you probably want to 'move file fileName of destinationFolder...'
There may be other problems, but they're likely to be related - all issues with object classes (e.g. files vs. strings), or not being specific about which object you want.
As I said before, though, I might be way off - you don't say where the error is triggered to make it easy to narrow down the problem. Usually AppleScript will highlight the line that triggered an error. Knowing what that line is would help a lot.

Form Created in LiveCycle 8 compatibility with Office 2010

A few years ago I created a form in LiveCycle Designer 8 which allowed my users to submit a pdf from by attaching it to an Outlook email. Some of the users have switched to Office 2010 and the submit button is no longer working. Any ideas for a fix? Thanks!

No you cannot... this is one of the things my organization struggles with. I love livecycle becuase of its dynamic form capabilities, but we have so many other pre-built pdfs in adobe pro that can not be merged with these forms. It is truly frustrating!!! wish i had a better answer for you. Also from the book 'Creating Dynamic Forms with Adobe LiveCycle Designer' page 6... "The PDF files that Designer creates are structurally different than other PDF files...... LiveCycle Designer can edit a PDF form created in Acrobat, but Acrobat can not edit a PDF form created in Designer." Likewise... XML pdfs do not merge with other pdfs. JoBeth

How to create a mp3 playlist compatable with the media server (storage link)

Hi,
I have setup the wrt160nl wireless router with the latest Firmware Version: 1.00.01 B17.
Everything is working great. I can browse the artists, albums, song titles etc from my usb hard disk.
What isn't working is the play lists.
What format does the play list need to be in?
I assume a text file with the tracks listed like: \music\acdc\back in black.mp3
What file extention or name will the playlist need to be in?
My pnp player only sees two playlists:
1) playlistlastplayed
2) playlistmostplayed
If I knew where those play lists were stored on the usb hard drive (or linksys internal ram?) then I might have a clue.....
Thanks for any help on this.

Playlistlastplayed has every track on the hard disk - and I haven't played them all, only like 3
Playlistmostplayed has ONLY 1 track that I haven't played from the linksys upnp server at all
I can play music off the album, artist and song lists fine.
I'd just like to be able to use a play list, and can't seem to find out how to make one.
I realize and understand that the linksys storage link system doesn't create them.
I assume I can make my own text file with track listings and copy the play list to the usb hard drive attached.
I just need to know the format of the text file, and what extention will it need.
I have tried .m3u .m3u8 .wpl
I don't have iTunes but if you told me I have to download that, import my music into that, then create the playlist there, well, I guess I could try that. I rather not load iTunes if possible.
Thanks

Sony HD Camcorder with hard drive-compatibility with a mac

I am considering purchasing a new Sony HD camcorder with an internal hard drive but it appears the hd format is not compatible with a mac. Does this sound correct and if so do we know how long til they can work together. Sony stated that mac would not be able to read the hd formatting? Sony model HDR-SR1

Thanks for adding consumer comments.
No sound in QuickTime (with the Playback Component installed) is probably created by Sony (not Apple). I'll bet they use their own "scheme" (proprietary codecs).
Your "conversions" from MPEG-2 format to DV Stream do look good. But they would look even better if the source format was DV Stream to begin with.
Because your camera records in MPEG-2 format it must first "compress" your video. DV Stream is 13 GB's an hour. MPEG-2 compresses this down so you're losing data from your "true" source.
If someone from Sony was passing these cameras out on a street corner I would walk on by.
I would consider a HD recorder if it kept the file as DV Stream and included a Firewire connection. Sony does this with their "tape" machine but they call Firewire "iLink".

Issue with BBM 7 Compatibly with Blackberries with OS6 systems (BOLD 9780)

I downloaded BBM 7 on my blackberry and the icon simply dissapeared, i dont know what to do, do i try to re-download it or do i simply try to re-install bbm 6? eitherways i have tired to do both and neither have worked, please help. URGENT

to reinstall BBM 6.2, read ahead:
http://supportforums.blackberry.com/t5/Downloaded-applications-for/HOWTO-install-BBm-6-2-if-you-have...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Will files with hidden file extensions in Mac OS X still open automatically in the correct application on a windows PC?

I recently submitted some job applications that had word and PDF attachments. However, when I saved the files I unwittingly had the 'hide extension' box selected. Will these files still open automatically in the correct application on a PC? (ie are the file extensions just 'hidden' at my end or are they completely removed by selecting this option so as to cause problems when opening them on a PC?)
Thanks in advance.

Thanks, so having the 'hide extension' box checked when saving a new file for the first time won't save the file without an extension? (because I understand that Mac OS doesn't rely on the file extension but has other ways of knowing what the file is and what to open it with)
The reason I'm paranoid now is because one of the fields where I was uploading a file had a message to Mac users saying something like 'Mac users, be sure to save your file with an extension'. Surely this just happnes by default??

What are file extension suppored by the screen painter

hai
i have small doubt at screenpainter.
what are the file extensions supported by screen painter
thanking
nagababu

It supports both files in .xml or .srf (at least I have opened both with the Screen Painter). My guess it supports any extension ... as long as the contents in the file have the right xml code on them.

UTI associated with wrong file extension

Okay, here is the deal. There are two file extensions, rar and cbr, that are associated with the Uniforma Type Identifier com.rarlab.rar-archive. I do not want the file extension cbr to be associated with com.rarlab.rar-archive. How do I break this association?

In Finder, do a Get Info on a .cbr File, look for Open With, chose what you do want to open itwith, check the Apply to all box.

Sending PO via email with pdf file extension

Good afternoon everyone. We are successfully (in testing) sending out Purchase Orders via External Send to an Outlook email address. When the user receives the email, it appears that SAPConnect (SCOT) is correctly coverting the file to a pdf (I can open it in Adobe Acrobat), yet the file attachment still shows a ".dat" file extension.
Where in the process do I need to set up SAP not to send the file out with a .dat file extension (in PDF format), but rather with a .pdf file extension (in PDF format).
Points awarded for good suggestions/comments

You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly.
To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
Regards,
Ashok

File extensions - can't see

I have the option to view file extensions in my folders.
However, I cannot
see the file extensions. i am having some problems with some
things and I
want to make sure I am downloading the *exact* same file from
my server
(where I can see the file extensions just fine. Though they
are checked to
be viewed, I've tried unchecking, rechecking, rebooting.
Ugh.
Thanks,
Libbi

You cannot see file extensions in DW's files panel?
I never heard of such a thing.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Libbi" <[email protected]> wrote in message
news:e7uauc$hvf$[email protected]..
> DW
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:e7uan6$his$[email protected]..
>> Do you mean in Explorer or in DW?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Libbi" <[email protected]> wrote in
message
>> news:e7u8fp$eq3$[email protected]..
>>>I have the option to view file extensions in my
folders. However, I
>>>cannot see the file extensions. i am having some
problems with some
>>>things and I want to make sure I am downloading
the *exact* same file
>>>from my server (where I can see the file
extensions just fine. Though
>>>they are checked to be viewed, I've tried
unchecking, rechecking,
>>>rebooting.
>>>
>>> Ugh.
>>>
>>> Thanks,
>>>
>>> Libbi
>>>
>>
>>
>
>

Are cp file extensions created with Captivate 4 compatable with Captivate 8?

Similar Messages

Maybe you are looking for