Are error messages created somewhere when an event_notifications are misconfigured?

Newbie question: We discovered that we had a value in sys.event_notifications.broker_instance that did not correspond to the value of sys.databases.service_broker_guid for any existing database. We were unaware of this for some time. Are there any error
messages generated by Service Broker when this happens or is does it just not work?
Thanks,
Ron Rice
Ron Rice

Hi Ron,
Have you got the detail error message in your case? If the Service Broker GUID didn't match sys.database services_broker_guid, we will encounter the following issue:
Cannot enable the Service Broker in database " " because the Service Broker GUID in the database (xxxxx) does not match the one in sys.databases (xxxxx)
To solve this issue, we can run the following command to reset the service broker:
ALTER DATABASE XXX SET NEW_BROKER WITH ROLLBACK IMMEDIATE
For more information, please see:
http://grumpydba.blogspot.com/2011/09/service-broker-guid-does-not-match-one.html
Elvis Long
TechNet Community Support

Similar Messages

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy

Error message MRM_DRSEG_FILL(SAP_DRSEG_FILL) when FI Vendor posting (IDOC)

Hello Gurus,
We used INVOIC IDOC type to do FI Vendor posting for intercompany flow (between 2 plants / 2 differents companies).
We get the error message "MRM_DRSEG_FILL(SAP_DRSEG_FILL)" when SAP tries to integrate IDOC on Vendor side (to create the Vendor invoice / MIRO).
There is no VAT between the 2 plants.
Do you have any idea from where the issue is coming from?
Many thanks.
Stéphane

I found one part of the solution.
We are working with AFS SAP. So in this case, we should use /AFS/INVOIC02.
Now it is fine except I get the error message: "Enter a tax code in item 0001".
I add manualy the "E1EDK04 VAT" segment with the correct VAT.
The IDOC is posted correctly.
Do you have any idea to fix it without manual change?
Many thanks.

Error message from web - when opening pdf files

Hi,
I receive the following error message a lot when I try to open an educational pdf file from the web. What do I need to do to 1. see, 2. print and 3. save these type of educational pdf files from the web? I am using a MacBookPro OS X.
Thanks for your help and sorry I could not find an answer on the forum.
Example: I try to import or download MIT18_06SCF11_Ses3.5sum 2.pdf onto my desktop - which seems successful. However when I try to open this file, I get the following error message.:
"Adobe Reader could not open 'MIT18_06SCF11_Ses3.5sum 2.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

Yes i tried following your list of commands and got the same error from MyMathLab by Pearson Publishing or the other link. I'm beginning to wonder if they are protected.
As you probably guess - I am not computer savvy. I will take my laptop to school tomorrow and ask another student.
Thanks for your followup.

Error message about forms when ID exported PDF is opened in Reader

I'm using ID CS2.
Has anyone successfully made navigation buttons on an exported PDF that doesn't produce an error message about forms when opened in Adobe Reader?
There's an Adobe page about this that says it's caused by having a stroke too near a link field, but I can't seem to avoid the message if I place more than one button anywhere on a page. I've spent a lot of time playing with this and can't seem to find a workaround.
Am I a sucker? Is anyone else trying to use this function other than me? It seemed like the perfect solution to this project I produced and now whenever a user opens the PDF they are greeted with a confusing message that has absolutely nothing to do with the functionality of the document.

Well, everything in those PDFs were form fields. You can make form fields in Acrobat - and then you can right-click on 'em and change their appearance, whether or not they'll accept rich text input, whether or not they'll scroll, and so on. It could also be done in LiveCycle Designer, for what it's worth. I wrote a now-obsolete post about this in response to yours before Mike showed up with this video.
Probably most of your work on your designs in InDesign would need to be trashed; you'd need to rebuild the whole thing in Acrobat or LiveCycle. I have to say that, unless your targeted documents are extremely simple, that this is one of the worst document translation workflows I've ever seen in the last fifteen years. It might work - I'm trying to keep an open mind, here - but if you have any non-Latin-script languages in your target list, or if print reproduction is what you're after, or if you're expecting tracking revisions to the translations to be anything but a nightmare, I would suggest that you test this method inside and out before progressing any further.

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

The Deskjet series printers connect to wireless networks with what is called USB to Wireless.
You will need a supported operating system to connect a Deskjet to a wireless network. Supported operating systems to connect the printer to a wireless network are Windows 7 (32bit and 64bit), Windows Vista (32bit and 64bit), and Mac OS X (10.5, 10.6, and 10.7).
While there is a software download option for Linux distributions, this is not the full featured software that is capable of adding the printer to a wireless network. Most printers have a wireless setup wizard to accomplish this task, but the Deskjet series printers connect in a different way.
Once the printer is connected to a wireless network, HPLIP 3.12.4 drivers should be able to locate the printer.
Click on Installing the Product Software for a Wireless Network Connection to receive instructions to connect to a wireless network using Windows and Mac operating systems.
Click on Software & Driver Downloads - HP Deskjet 3070A e-All-in-One Printer - B611a to download the appropriate software for a supported operating system to connect to a wireless network.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

Try reentering the password in your iCloud mail settings.

DVD player does not play - Error message "Create Overlay Failed

Can anyone please help. The player on my Equium does not playback any DVDs using either InterVideo WinDVD. Error message "Create Overlay Failed ... Please lower your screen resolution or screen depth." Any help appreciated. Thanks Owen

Horwath
Thanks for pointing me in the direction of VLC Player. I had no idea what VLC is but it seems a safe (and free) feature. I googled it and downloaded latest version for XP. All DVDs now play perfectly! Still no joy with other players but who cares. Many thanks, full marks. Owen

HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari

An error message came up when updating camera raw 6.7 on my CS5 on windows 8

I Have Lightroom 5.5 and CS5 Photoshop.
An error message came up when I tried to update CS5 and Camera raw.
Can you assist.
[email protected]
Regards
Peter

Try manual update.
Product updates

TS3274 Error message 5000 received when trying to update ipad software

How do I resolve this error message 5000 received when trying to update ipad software from my computer?

iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

TS3274 Error message on ipad when we tried to download images to computer. 'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

Error message on ipad when we tried to download images to computer. 'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes. It downloaded some images prior to this message and we selected skip any files with errors.
Ipad now just showing apple image with power cord. Don't want to click restore and lose all data.

Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help?

Error message: 50103 (oxffff3c49) when trying to run VILogger

I get this error message: 50103 (oxffff3c49) when trying to run VI logger for data received from the NI USB 6008 DAQ. What does this mean and how do I fix it?

Go through all these threads and post back if that solves your problem or still you stuck up.
Mathan

Are error messages created somewhere when an event_notifications are misconfigured?

Similar Messages

Maybe you are looking for