Are GPIB (PCMCIA) drivers available for Windows CE (H/PC2000)?

I am trying to install a gpib card in an HP jornada 720

Hello-
National Instruments currently does not have any Windows CE drivers and do not, at this time, have plans to develop a driver.
Ray K
NI Applications Engineer

Similar Messages

Are Drivers Available for Windows Vista Beta

I have a Audigy 2ZS platinum sound card and can not get it to work with Windows Vista Beta . Does anyone know where I can obtain drivers for this OS, or is there ant work around for this problem?
Thanks for any help, Li'vermaggot

Thanks for your answer John. I reworded my search last night and found the same post. I emailed Creative Developer Network as was suggested at the bottom of the post and received the info from Creative today. Basically, XP drivers will work with Vista, however 3D and a few other items will not work with Vista until Creative comes out with beta drivers for Vista.
I would imagine that Creative will wait a bit before developing or releasing drivers as the Enterprise version of Vista is the only one near general release for next summer. At this time Microsoft still does not know what retail versions will be released, ie: Home, Pro, Media Edition...
Thanks again, LM

Are updated USB drivers available for download?

Solved!
Go to Solution.

No, you do not need a driver if your operating system is Microsoft Windows XP, Windows Vista, or Windows 7. The drivers that are needed to connect most Sony® cameras to a computer are already built into the operating system on your computer.
IMPORTANT:
Some cameras do not support a USB connection to computers running Windows 7 or Windows Vista operating systems.
If you are having problems with Picture Motion Browser (PMB) or have lost your disk, no problem. You can now download and install the full version of PlayMemories Home (this replaces PMB) at http://www.sony.net/pm.
USB compatibility with Windows Starter Edition is not supported.
In some rare cases, the USB connection from the camera may not be recognized by the computer.

Lenovo Beta Drivers Now Available for Windows 7

Lenovo now has BETA drivers available for Windows 7 on this link:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html
Remember that Lenovo will NOT support Windows 7 because it not Official yet.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Isn't this page around for a while now? Or did they change something?

When will the PCMCIA GPIB+ software be available for thee XP?

When will the PCMCIA GPIB+ software be available for XP? Will it be a free upgrade? We just bought our package and it seems like we sould get free upgrade!

Hi Shuttle,
Unfortunately I cannot give you any specific details because I do not know any specific details myself. What I can offer you is that I know that it is being actively worked on as we speak. Tentatively, it is scheduled for early 2003, but as I said this is very tentative.
Best Regards,
Aaron K.
Application Engineer
National Instruments

HP G62 -Windows 10 "this version of Windows not available for Windows 10 app"

I'm trying to schedule the Windows 10 upgrade and receive the message "this version of Windows not available for Windows 10 app". I have Win7 SP3, enough memory, everything else it says it requires. the only thing I can't verify is the graphics driver. What might the problem be?

I am using a HP G62a50sg ( APU ATI HD4250 Mobility and ATI HD 5470 Mobility ) . The Windows 10 Update showed that there were no compatabilty problems and I did the upgrade. Everything works fine only the graphics are the problem. I have installed Windows 10 64 bit (Clean) around 5 times and tried all the drivers starting from Windows 7 , Windows 8 ,orginal Notbook drivers von HP and also from AMD ( CC 15.7 Mobility) . Nothing seems to work. Windows 10 reconizes the graphics but doesn`t support the switchable graphic funktion. I think it is an issue with the APU HD4250 Mobility and the Chipset. The desktop has only the 1024 X 768 option and in the graphics manager ( desktop) shows the Graphics as Basic Microsoft Display Driver. I am still trying but I am running out of ideas.

Drivers download for Windows 10

I am so disappointed in HP's response to the roll out of Windows 10. There are no driver downloads for Windows 10 and although I do not feel Microsoft did a grerat job on their roll out regarding their Technical support I am still without my CD, my Kodak camera and had great difficulty getting my printer to work. All my equipment is HP and here I sit dead in the water with some of my issues. Was told to wait a month and check HP again for their new driver down loads. I just did the auto driver update download which scans the system that reported no issues were found. It was Windows 7 check. It should have acknowledged that nothing was available for Windows 10 and when it should be expected. I understand from Microsoft Dell, Acer and others had all their drivers available for the Windows 10. Supposdely all mfg. received the software in June to give them time to produce their drivers.SHAME ON HP!!!!MC-Arizona

So I have the Aspire M3970 as well. I applied for the Windows 10 upgrade, and it comes back saying I'm totally compatible. Install and any connection via the Internet to Micosoft programs (Edge, Search, Store, Windows update, etc.) doesn't work. Yet Chrome and Vista do work fine. Contact Microsoft and have a tech work on my system for a couple of hours and can't fix, then books an appointment for an escalated tech to work on it. He plays around for an hour tonight and then tells me that my computer doesn't have the drivers. Then...here is the kicker, I ask him to revert me back to Window 8.1 which you have 1 month to do so, and the message comes up that the files have been overwritten. Now I'm being told by Acer that I'm not entitled for support, being told by Microsoft to wait for Acer to fix the drivers but the can install Windows 8.1 but I will lose my bought and paid for Office Professional 2010. Is everybody just turnig a blind eye to customers for years to their products?

Hp monitor drivers updated for windows 10

my newly updated Dell tablet (used in a docking station) can no longer detect my HP Pavilion 23 and 25 bw monitors. . .the hp website says that updated drivers are not available for Windows 10. . .when is HP going to make these available for Windows 10 upgrades????

Drivers for 7 do not exist for almost everything out there that is not natively handled in Windows 7. The monitor should have Plug and Played?
If you still want to pursue happiness you can try this (you are on your own because this is a release candidate):
1. create a system restore point to go back in case you don't like how it turns out.
2. Download the "XP" sp31061 to get to the inf (and ICM if you use it).
3. Start the install but halt the install process when the HP Display Installer opens, and open the following path: C:\swsetup\Monitors\SP31061\64bit
4. Inside you should be able to find a 32 and 64 bit inf that you can right-click on and install. HP_vs19x64.inf
Message Edited by RasterBlaster on 07-13-2009 05:46 PM
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT202577 Is the apple configurator available for Windows in order to push profiles to apple TVs?

We currently have a windows environment at work and use 802.1x authentication and have some 1st generation apple TVs. We would like to get them on our wireless but are having issues. I would like to push profiles to these apple TVs to see if I can get them on but I am not going to buy a Mac to do it.
Is the apple configurator available for Windows or even ubuntu?

Hello,
Thanks for using Apple Support Communities.
Apple Configurator requires both Mac OS X, and the most up to date version of iTunes, and can only be installed from the Mac App Store.
Mac App Store - Apple Configurator
Cheers,
Alex H.

Drivers update for Windows 8.1 model Lenovo G580 (2689, 20157)

When available drivers update for windows 8.1 model g580 (2689, 20157)....microsoft launch win8.1 18 October and i m also using windows 8.1 RTM ...

Hi Sutanshu,
Welcome to Lenovo Community Forums!
The driver updated for Windows 8.1 will be available only when the full version of the OS (Operating System) is released from the Microsoft and it will be automatically available through “Windows Update”.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When is Firefox Mobile going to be available for windows phone?

When is Firefox Mobile going to be available for windows phone?

May be there is no possibilities in near future to implement Firefox for windows phone. There are some technical and legal issue for deploying Firefox on windows phone. Moreover Mozilla is spending more energy on it's own mobile operating system which is Firefox OS.

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

Kindly let me know if there are special discount offers available for IBM employees ?

Kindly let me know if there are special discount offers available for IBM employees ?

Many companies have EPP (Employee Purchase Programs) with Apple. You need to check your benefits programs offerred by IBM. It will basically be a URL to an EPP login page for the Apple Store.
NOTE: I do not think there is any discount on iPhones.
I have observed that the discounts tend to be around 8% on Pro equipment and 6% on consumer products. But some items the discounts vary depending on the product. And in some cases there is no discount.
Again, check with your IBM benefits.

Are GPIB (PCMCIA) drivers available for Windows CE (H/PC2000)​?

Similar Messages

Maybe you are looking for

Are GPIB (PCMCIA) drivers available for Windows CE (H/PC2000)?