Are my settings correct for .m2t transfer through mpeg streamclip?

hello,
i shot a video on the **sony hvr z7u** using compact flash cards and the video was shot on 1080i ...all the files are currently in m2t...
i used mpeg streamclip and used the follow settings:
-apple pro res 422 codec
-100 percent quality
-uncompressed sound
-frame size: 16:9
-interlaced scaling was checked
are these acceptable? some of the footage doesnt look good with dark colors, but it might just be the way it is shot...
thank you!
steven

The Holy Grail in M2T conversion. Say it 3 times: clipwrap clipwrap clipwrap
The only program that easily rewrap m2t files into QuickTime movies Faster than transcoding
No generation loss. I have an nNovia Digital Drive to record my HD files from a Canon XH A1 camera. The M2T files were horrible to work with. No converter worked. Sound did not sync, Video artifacts, unusable. I downloaded trial- converts first minute and it worked GREAT! Bought it $49.99 very fast conversion. NO LOSS! I am in love! http://www.clipwrap.com

Similar Messages

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

Delivery cost for Stcok transfer through M.type : 351

Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu

Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

Where are proxy settings stored for JRE 6

Where are the http proxy settings stored for JRE 6? I am trying to figure out how to centrally manage these settings for a large number of computers. I have heard about the deployment.properties file, however changing this file is not changing my proxy settings.
Thanks for you help.

Hi All,
Thanks for the info. I think this is what I need, but I opened the Javascript console and pasted in the code and nothing happened.
(Programming, javascript, etc are not my area of expertise. My core competency is writing/editing.)
What else do I need to do to make the Console recognize and respond that line of code?

Newbie ? Are these settings normal for K7T Turbo2?

Greetings All,
First I would like to say I really enjoy this forum. I have learned much. Also I would like to say that I am fairly new at putting together systems so if my questions are basic please forgive me. Thanks for your patience and your willingness to teach. OK, here is my system and my questions:
K7T Turbo2 v.5
Duron 800
2 sticks 128meg = 256
PSU Sparkle 300w; 150w combined (according to sales slip)
Asus 7100 Geforce 2mx 32 meg
SB 128 pci sound card
Western D 80gig special
Acer 52x CD
LiteOn 48x12x48
Win 98se
Most curent VIA drivers
I think that about covers it.
The questions:
1) I have seen a lot of discussion about voltage seetings so I am wondering if mine are normal? They are as follows:
Vcore = 1.55v
5v = 5.05v
3.3v = 3.27v
12v = 11.60v
2) This may need to be in the BIOS group but what are the optimum seetings for this board and my stuff?
3) When I boot up I notice that just about all my hardware is using IRQ11. Is this normal?
4) A while back I saw a lot discussion about ACPI. Is it best to use it or not? If you turn it off do you have to reload your OS?
I think that about does it for now. Thanks again for your help.
Dave

Ian,
Not that I am very technical and do sometimes get mixed up in my own settings...
I got a canon A1 and use the easy set up for HV 1080i50 on interlaced footage
and 1080p25 for the '25f' footage. When using the de-interlaced filter I hit the
upper field and I am having a major headache from time to time with sequence
settings and field dominance in particular with interlaced footage but do experiment
quiet abit to my even larger frustration. I do find the '24f' frames quite pleasant to
look at - maybe it is just because it is easier to work with I dont know, but interlaced
got a reputation of being difficult.
Likewise as far as I am aware then the '25f' canon setting is as good as progressive
some will even say 'same'. check out more here
http://www.dvinfo.net/conf/forumdisplay.php?f=138
Henrik

Where are the settings/preferences for firefox?

I am trying to find the settings/preferences for firefox but I updated my firefox and now cannot find them.

Why didn't I think of that .... In any event, I found the answer. The issue lies within the "automatic proxy detection" selection. If its selected and OSX cannot determine the proxy, this causes a cascading failure on upgrade websockets using ws:// protocol headers. You need to uncheck the automation, and the manual HTTP and HTTPS proxy settings will be used for all protocol headers that originate from HTTP/S including the WS handshake upgrade and connection protocol.

Exact import settings for .mov files via MPEG Streamclip?

Ok, as I mentioned in this other thread , I'm looking to import some files recorded at an odd resolution into FCE.
Resizing my 512x288 files to 720x480 looks like it works, as well as with my 640x480 ones (don't know how it'll ultimately mess with the quality)... but I did do a test using some footage from 3 different video sources with different native resoultions, a)720x480 Sony DV Cam, b) 512x288 captured by helmet cam on Archos PMA 430, and c) 640x480 captured on Canon SD600, as well as .jpeg photos at 640x480 res.
I changed the odd sizes (Archos & Canon) to 720x480 using MPEG Streamclip, resampling the sound uncompressed at 48 khz, using the Apple DV/DVCPRO NTSC compression option. Importing these files into FCE, I mixed them and the Sony standard footage, and a few pictures up on a timeline, rendered it and exported it to a QT file, then burnt a CD. It appears to have worked to my satisfaction.
My question is, before I go and convert about 60 5-10 minute clips to this 720x480 resolution for use in a full length documentary, are there any settings I should be ticking off on the MPEG Streamclip interface to maximize the likelihood that the final project will work as well as the test did?
Below are the options I selected in the test, which seemed to work:
MPEG STREAMCLIP
Compression: Apple DV/DVCPRO-NTSC
Quality: 100%
Sound: Uncompressed Stereo 48 KHZ
Frame Size: 720x480
Frame Rate: 29.97
Checked boxes for:
-Frame Blending
-Better Downscaling
-Interlaced Scaling
Zoom: 100%
X/Y: 1
Center: 0,0
Field Dominance: Upper field first
That's about it. I tried doing similar conversions in a trial version of DIVX Converter pro, but the quality was noticibly lower than in MPEG streamclip. Maybe I just had the wrong settings in it.
Anyway, Tom Wolsky has mostly got me on the right track in the last post "...so the material needs to be a .mov QuickTime file in DV NTSC, at 29.97fps, audio should be Linear PCM with a sample rate of 48KHz, and frame resolution of 720x480 using the CCIR601 digital video aspect ratio... be warned you're scaling up a very, very heavily compressed video stream, so it's going to look less than optimal when you make it DV. I can't believe they can do 192kbps at that frame rate, when DV, which is heavily compressed as well, is 3.5MB/sec."
I have no idea if what I described in my test is heavily compressed or not, so couldn't really say how the settings I mentioned above affect Tom's latter advice.
Anyway, any help would be welcome before I encode all these files. Thanks.
iMac 17-inch 1.83GHz Intel Core Duo Mac OS X (10.4)

I'm kind of confused because the only settings I could find on the Handycam for audio are 12 khz and 16 khz, and though I think I filmed them at 12, I've captured the footage at both within FCE... I'm not sure either have shown any probs when imported at 48 khz as yet. Not sure if that's because they are a multiple of 48 or I just got lucky. Either way, 1) does the audio bit rate the footage was captured at (12 khz) change to 16 if changed on the camcorder (or is it solely what the original was filmed in, period) prior to capture on FCE, 2) and if so or if not, how serious of a problem will it pose, if I do nothing and keep the FCE settings at the normal NTSC 48khz, in later stages of production considering there will be a lengthy timeline?
iMac 17-inch 1.83GHz Intel Core Duo Mac OS X (10.4)

Sequence Settings for .mov clips from MPEG Streamclip

I'm converting some DVD clips (from old DVDs I created) that I exported to QT using MPEG Streamclip.
When I put them in the timeline sequence, I have to render everything.
Can I change the sequence settings to avoid this? And can I change the settings of a sequence that already has clips in it?
Thanks.

I set MPEG Streamclip QT Export to:
QT Apple DV/DVCPRO NTSC
Frame Size 720X480 (DV-NTSC)
Quality 100%
http://i44.tinypic.com/29zdhr9.png
I set FCP sequence:
Frame size 720X480 NTSC DV (3:2)
Compressor DV DVCPRO - NTSC
http://i44.tinypic.com/of3h8h.png
I still need to render. And the aspect ration looks squished in a bit. Like I've set something wrong.
What am I doing wrong? How should I change the settings:

Best export for a .VOB from MPEG Streamclip to iMovie?

Hi,
My source is a DVD and I want to make sure that the two minutes I end up with in iMovie is of the best quality.
I own the Quicktime MPEG-2 thing and, becase of timecode errors, I have opened the .VOB in MPEG Streamclip and I am asking myself, "Which Export, Convert, Demux do I use?"
In the discussions I have seen a lot of recommendations for Exporting to a DV Stream.
If this is the best quality, which compression? DV25, DV25PRO or DV50PRO? Additionally, aside from checking "Split DV Stream...", what other options (Frame blending, deinterlace, better downscaling) should I check?
What about simply Demuxing the VOB and placing the mpeg2/aiff into iMovie -> contents-> media? Can iMovie handle a mpeg2 and, if so, wouldn't that allow the greatest amount of flexibility?
BTW - I don't know what the end product is going to be, which is why I want to have the flexibilty and highest quality.
Thanks!

Video-DVDs (VOBs inside the VIDEO_TS folders) use 48 kHz audio so you don't need to touch the resample button in MPEG Streamclip.
I don't want to lose information if I don't have to.
Yes... You are already dealing with a VOB -> DV conversion which degrades quality... If possible, I'd get the original source and digitize that to DV, so there wouln't be any quality degradation from the detour to DVD.
Or, if that fails, edit the VOBs with apps like MPEG Streamclip -- that won't degrade DVD quality level either. But then you'd have to forget the iLife apps because they don't support this kinb of workflow.

What are network settings required for starting Web Dynpro for ABAP

hi,
I am learning Web Dynpro ABAP from SDN e-tutorial.
While creating view, the layout is displaying following error message
"Network Access Message: The website cannot be found . The IP address for the website you requested could not be found. "
Please guide about network settings needed in order to work in webdynpro ABAP.
I am working on SAP system's
Component version SAP ECC 6.0
Regards,
Tanaya
Edited by: Tanaya A on Oct 8, 2008 12:53 PM

Hi,
I have made entry in Microsoft Window's drivers>etc> host, but still following error message is coming "The IP address for the website you requested could not be found."
Technical Information (for support personnel)
Error Code 11001: Host not found
Background: This error indicates that the gateway could not find the IP address of the website you are trying to access. This is usually due to a DNS-related error.
Date: 10/10/2008 12:07:26 PM
Server: SURFCONTROL.odc.infotech.com
Source: DNS error
I think that i also need to make configuration settings in SAP.
Please guide me further.
Regards,
Tanaya
Edited by: Tanaya A on Oct 13, 2008 11:37 AM

What are the settings to for best quality video for playback on computer?

I'm not having any software or hardware issues. I have tried differnent combinations using AVI, MPEG and WMV and I'm still not satisfied with the quality.
I have used the same settings as my original video and it still is no where near the quality. Maybe this is as good as it gets, any help would be appreciated.
quick rundown
I'm using the recorder on my computer to record my screen and voice to create video tutorials for my students to watch on-line. This creates a 720x480 AVI file and has good quality.

What is the best preset to use for HD-lite?
The best is one that matches the Source Footage 100%. Unfortunately, with that variation on HD, I do not think that PrE, even PrE 10, will be able to come close. PrPro, however, does have the ability to do Custom Sequences (think a bunch of mini-Projects inside of a Project), and one can match odd Frame Sizes, FPS, etc.. I was hoping that PrE 10 would have Custom Presets, but it did not show up. This limits PrE to standard Frame Sizes, which is not what most video screen capture programs offer. Your footage does not match to any real HD-Lite Frame Sizes, so you will still have the same problem.
It does appear that your program, while different than the TechSmith Camtasia, does use the TSCC CODEC. This will give you a bit more info. Also, though you do not have Camtasia, or CamStudio, I think that the article, that I linked to above, might be of use.
Now, what options does your video capture program offer for output?
Good luck,
Hunt

What are theSNP Settings required for Forecast Consumption with Sales Order

Hello APO Folks,
I have one SNP scenario: (We don't have GATP)
Forecast for Finsihed Product - "PNG_Fert" in Location "1000".
I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
Please let me know which strategy will be used and other setting in ECC and APO for SNP. I
The setting with strategy 50 in ECC and 30 in APO worked properly with PPDS - RRP3 view but from interactive planning /sapapo/sdp94 it is not working, so there will be different setting for SNP.
Thanks in Advance,
Regards,
Vishal
Edited by: Vishal24a on Oct 13, 2011 9:15 AM

Vishal
Can you please explain what issue you are facing when you load the product in planning book. First thing is do you see 410 against forecast and 90 against sales order key figure ? If yes then it means the forecast is getting consumed properly by SO.
As far as your other requirement goes (planned order should only be created for sale order quantity) you have to change your total demand macro calclation logic. Your total demand key figure should show 90 instead of 500 - so just include sales order in your total demand calculation (stock balance macro) and run heuristic. Your requirement will be satisfied
Thanks
Aparna

Message type for data transfer through ALE

Hi Gurus,
I am working on master data transfer throgh ALE.We want to transfer data from Dev. server to Quality server.Here the client is same that is 123.We have defined logical systems and RFC also.Now for transferring inspection characteristic what is the message type that should be used in transaction BD64.please help.
Regards
Amit

not found any replies

Are these steps correct for ALE configuaration ?

1.An ALE Configuration we have to do five steps
a)Define logical System (SALEsending and receiving system logical systemdefine logical system)
b)Assign client to the logical system( SALEsending and receiving systemlogical system Assign client to the logical system)
c)We have to define port at (WE21)
d)GENERATING PARTNER PROFILES(WE20)
e)Define target system for RFC calls (sm59)
f)Creating Distribution model (BD64)
g)WE42 for creating process code.
h)Send Data ( bd10)
i)Get Data(bd11)
j)BD51
k)WE57
We have to repeat the FIRST 6 steps for each of the sender and receiver and those are compulsory. I am not yet clear about the last 5 steps.
E.g. our sender is 200 and receiver is 400
So for each of them we have to do the 5 steps twice.

folow the link
http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
which will givw u the steps for ale configuration
steps are
. ALE->Sending and Receiving Systems->Logical Systems->Define Logical System. a. Here you add the name of the logical system for the distributed system. To make them easy to find I like to name them based on instance/client so in the case of the system listed above I would call it DM7200. This naming convention makes it easy to follow in various systems.
2. ALE->Sending and Receiving Systems->Logical Systems->Assign Client to Logical System.
a. In this step you assign your logical system to a particular client. WARNING: DO NOT CHANGE THIS IF IT IS ALREADY CONFIGURED!!! That holds especially true on an FI system as it cannot be changed once it is set. Make sure to discuss this with the Basis team before entering the data.
3. ALE->Sending and Receiving Systems->Systems in Network->Synchronous Processing->Determine Target System for RFC Calls
a. This area allows you to tell SAP where to make RFC calls based on the logical system. That means that when I want to look up Vendor information in cases like infotype 194 and 195 where a function module is called that I can tell the system where to go to find that information. To configure this you should make sure that the system where the financial information will be kept is listed.
4. ALE->Modelling and Implementing Business Processes->Maintain Distribution Model and Distribute Views
a. In this step we will define where the FI data comes from and what data we expect to receive. We will also define the system that will be receiving the payroll posting and what data we will be sending that system.
b. SAP Recommends the following list of messages to be received from the financial system:
i. COACTV-IDoc for cost center/activity type
ii. COAMAS-Master activity type
iii. COELEM-Cost Element Master Data
iv. COGRP1-Cost Center Groups
v. COGRP2-Cost Element Groups
vi. COGRP5-Activity Type Groups
vii. COSMAS-Master Cost Centers
viii. CRECOR-Core Vendor master data distribution
ix. CREMAS-Vendor master data distribution
x. GLCORE-Master data G/L accounts (CORE IDoc)
xi. GLMAST-Master data G/L accounts (master IDoc)
xii. PRCMAS-Profit center master record
xiii. RCLROL-Reconciliation ledger rollup
c. To add these messages you can follow the steps listed here:
i. Go into change mode by clicking on the pencil/glasses button or Distribution model->Switch Processing Modes via the menu
ii. Click on the Create Model View Button
Fill in the data for your model. Below is my example.
iii. Now it is as simple as adding message types. Click on the Add message type button and enter the required data. The sender is the FI system and the receiver is the Payroll system. Tip: Once you add the first message type if you select it before adding the next message you will only need to fill out the message portion and not the sender and receiver
iv. Now we need to build the partner profiles so that the systems know where the distribution model needs to get or put things. To do this go to Environment->Generate Partner Profiles.
Enter the partner system you want to use and press execute or F8.
This screen shows the successful creation of the partner profiles. If you want to see them can go to transaction WE20.
v. Now we must send the model to the other system. To do this use menu path Edit->Model View->Distribute
Now I should be able to see this model in my FI system, in this case, DM3. I can take a look at this via transaction BD64 in the other system
You'll notice that the coloring on the messages and models is in gray. This indicates that the model is maintained in another system.
d. We also have to configure the model for posting to the other system. In this case we will be using BAPI's and not message types. SAP recommends the following BAPI's:
i. AcctngServices.DocumentDisplay, Accounting: Display Method for Follow-On Document Display
ii. AcctngEmplyeeExpnses.Post, Accounting: Post G/L Acct Assignment for HR Posting
iii. AcctngEmplyeeRcvbles.Post, Accounting: Post Cust. Acct Assignment for HR Posting
iv. AcctngEmplyeePaybles.Post, Accounting: Post Vendor Acct Assignement for HR Posting
e. For the most part the steps are the same as above but it is slightly different because you use the Add BAPI button instead of the Add Message Type. BAPI's are case sensitive so you'll need to be exact.
<REMOVED BY MODERATOR>
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 22, 2008 2:27 PM

Are my settings correct for .m2t transfer through mpeg streamclip?

Similar Messages

Maybe you are looking for