Are the tracks limited to a certain length? If not, how do I increase the length of a track?

I have found that in the new version of GarageBand my tacks have been limited to some length, which i never had a problem with in the older GarageBand. What is the deal with this?

What kind of limit are you seeing? Does the bounced song appear clipped? Can't you add measures at all?
The only hard limit I know of is the size limit to the bouce file. You cannot share songs from GarageBand that exceed the limit for wav or aiff files while bouncing, even if you are exporting in mp3 format.

Similar Messages

  • What are the limitations regarding use of video in an iBook: length, file size, etc?

    What are the limitations regarding use of video in an iBook: length, file size, etc?

    Total book size is 2.0GB max. Length would be relative to size based on quality.
    See:
    - Optimizing performance in your iBooks Author books
    - iBooks Author: Add video to your iBook

  • I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

    I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
    Is there some glitch in final cut express that only allows short clips to be transferred in full?

    Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
    By the way, the other reply I received suggested the following:
    In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
    I did this and it was already unchecked. So this is not the answer...
    The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min)  the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
    I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
    ANSWERS
    how you are ingesting the files
    From external flash drive connected directly to mac using FCE.
    the format of the source footage
    digital via ext flash memory. Frame size :1929X1080 / 25fps
    what camera shot the footage
    SONY HXR NX5
    how you are connecting to the computer
    from flash memory directly via usb
    what version of FCE you are using
    4
    what OS your computer is running
    10.6.8
    what model Mac
    macbook Pro intel Core i7
    what drive you are using for Capture Scratch
    3TB external drive (plenty of room left)

  • What are the possibilities and limitation of using Out of the box content search webpart on SharePoint Online 2013/O365 ?

    Hi All,
    We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
    I have few questions below: 
    What are the possibilities and limitations of using Out of the box content search webpart?
    Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
    Appriciate any commnets/clarifications.Thanks in advance.
    Thanks,
    Dhananjay.

    Here are the possibilities of Content search webparts
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
    Compare the strengths and limitations of the Web Parts
    It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
    world, here’s how you can decide between the two:
    Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
    Use the CSWP in all other scenarios when you want to show content that is based on a query.
    The table below gives a comparison of the two Web Parts:
    Web Part behavior
    Content Query Web Part
    Content Search Web Part
    Query configuration
    Easy
    You’ll need to know about certain search features such as
    managed properties.
    Query across large amounts of content
    Limited
    Yes
    Handle complex queries
    Limited
    Yes
    Scale to handle future content growth
    Limited
    Yes
    Display content from other site collections
    No
    Yes (see
    section below)
    Design of query results can be customized
    Yes, by using XSLT.
    Yes, by using HTML.
    Maintenance cost in a complex site architecture
    High
    Small (see
    section below)
    Narrow down the query results that are displayed in the Web Part
    No
    Yes, in combination with the
    Refinement Web Part.
    It was not there previously but then it was added to Office 365
    http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
    If this helped you resolve your issue, please mark it Answered

  • Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment for Lightroom 5

    Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation for importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment to Lightroom 5.7 ?

    dj_paige wrote:
    As far as hardware restrictions, the only one I can think of is that you certainly need enough free space on your hard disk to accomodate the masters from your Aperture library.
    IIn which case, ensure all your masters are "referenced" in Aperture, and that you then go to Options in the Lightroom import box and import photos in their existing locations.

  • What are the limitations of using RMI over http with EJB?

    We have a requirement for an intranet application where the majority of the clients
    (Swing clients) will be able to connect directly using either T3 or IIOP. However,
    there are a number of clients that will need to traverse a firewall.
    We could use SOAP, but I dont want to lose the value that RMI gives us (clustering,
    security, statefullness support etc). I am thinking of using RMI over http - which
    Weblogic supports.
    I have been trying to find some documentation on the topic - but havent succeded
    so far. What I would like to understand is: What limitations I would have using
    RMI over http. Do I lose anything (apart from performance) using http?
    Regards,
    Nick

    You will have to enable tunneling on the server side and I have not heard of any
    complaints of using it.
    Shiva.
    Nick Minutello wrote:
    In fact, we are not using applets - and its not an internet application. We are
    using Java Webstart and Swing on our intranet (the problem of the size of the
    weblogic.jar is a pain - but well known)
    The question for me is; Apart from performance, are there any limitations to using
    RMI over http?
    Can we also use JMS over http?
    -Nick
    Shiva Paranandi <[email protected]> wrote:
    "Old wine new bottle".
    The biggest problem with the approach of Applets like
    stuff connecting to weblogic is the size of the classes that need to
    be supplied to the
    users. The applets/swing would need a lot of weblogic classes which you
    need to
    supply as jar file. This file can be in the order of MBs depending on
    the
    weblogic version. we had a similar kind of problem and migrated the applets
    to use
    servlets instead of directly invoking ejbs or jms topics etc. Having
    the applets
    connect
    to servlets you would still benefit from the features of clustering etc.
    and added to
    that
    you would reduce the number of remote calls.
    Shiva.
    Nick Minutello wrote:
    We have a requirement for an intranet application where the majorityof the clients
    (Swing clients) will be able to connect directly using either T3 orIIOP. However,
    there are a number of clients that will need to traverse a firewall.
    We could use SOAP, but I dont want to lose the value that RMI givesus (clustering,
    security, statefullness support etc). I am thinking of using RMI overhttp - which
    Weblogic supports.
    I have been trying to find some documentation on the topic - but haventsucceded
    so far. What I would like to understand is: What limitations I wouldhave using
    RMI over http. Do I lose anything (apart from performance) using http?
    Regards,
    Nick

  • SSAS Tabular in DirectQuery - What are the workarounds for formula limitations?

    Hello,
    I need to create an SSAS Tabular model against the database of a live, real-time, line of business transactional system (i.e. a CRM).
    The business requirement behind it is that we need to create some complex reports against live data, and our DW is only updated daily.
    This live model will however be partitioned with a time-variance limitation (e.g. only records which are XX old can be returned).
    Now here is the challenge. Since I am querying live data, then I believe the model must be configured in DirectQuery model. Am I right?
    The issue is that DirectQuery mode is full of formula limitations. So my concern is, if I need a calculated column or measure that I cannot make it work due to DirectQuery limitations, then what are the alternatives?
    Remember that the data source is from a live system, so it is not like I can create columns and measures in the underlying relational database.
    Please advise.
    Regards,
    P.

    Hi pmdci,
    According to your description, you want to use some functions in calculated measure which are not supported in DirectQuery mode. Right?
    In Analysis Services Tabular, since DirectQuery has the real time access and scalability, this comes with a price of restrictions on a number of DAX functions and missing Calculated Column feature. Generally the workaround for these scenarios
    is replacing those functions with other functions which are supported in DirectQuery mode, or create columns in the data source. However, as you said, your environment is not possible to create columns in the database. And a lot of those limited
    function are not replaceable, like time intelligence functions. So actually, there's no really effective workaround currently.
    For you requirement, I suggest you submit Microsoft a feature request
    at https://connect.microsoft.com/SQLServer
    so that we can try to modify and expand the product features based on your needs.
    Best Regards,  
    Simon Hou
    TechNet Community Support

  • What are the solutions offered to handle length based or mill products?

    We are on 11.5.10. Current version treats beams as each, we have 30 feet beams, 20 feet beams etc.
    We do not want to set-up different items for each length of beam.
    We need ability to tell we have 10 pieces of 26 feet beams in inventory.
    Currently we can only tell we have 260 feet of beams.
    Current solution treats it discretley. We need ability to sell length based items, receive length based items, do inventory management based on length based items.
    a) What are the solutions offered by Oracle in latest releases for Length based products or for Mill products.
    b) If there are any solutions offered by Oracle to handle length based or mill products, can these be back ported to Oracle 11.5.10?

    At the time of entering orders, item inquiry, receiving, inventory transfers etc...You can enter the lot attributes during receiving because you create a new lot number.
    On Item onhand inquiry, you can enter lot context and lot attributes to limit your search to specific lots.
    You may have to write personalizations on other screens.
    Hope this helps,
    Sandeep Gandhi

  • What are the solutions offered by Oracle to handle length based products

    We are on 11.5.10. Current version treats beams as each, we have 30 feet beams, 20 feet beams etc.
    We do not want to set-up different items for each length of beam.
    We need ability to tell we have 10 pieces of 26 feet beams in inventory.
    Currently we can only tell we have 260 feet of beams.
    Current solution treats it discretley. We need ability to sell length based items, receive length based items, do inventory management based on length based items.
    a) What are the solutions offered by Oracle in latest releases for Length based products or for Mill products.
    b) If there are any solutions offered by Oracle to handle length based or mill products, can these be back ported to Oracle 11.5.10?

    Please do not create duplicate posts across the forums -- What are the solutions offered to handle length based or mill products?

  • What are the different tools and techniques available to track analytics in SharePoint online 2013?

    I want to know What are the different tools and techniques available to track analytics in SharePoint online 2013. Please provide your suggestions/ inputs. Thanks in advance.

    you can Use the Web Analytics Integration app  to
    connect your SharePoint Online public website to third-party web analytics services, such as Webtrends, Google Analytics, Adobe, and so on.
    Google Analytics
    Webtrends for SharePoint
    CARDIOLOG ANALYTICS
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

    What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

    You would have neede to have "Find my phone" activated on the iphone
    Log into icloud https://www.icloud.com/  and track.

  • What are the limitation of the 4 Port Gigabit ethernet Security Service Module (4GE SSM)?

    I was wondering if anyone can help me out. I am trying to create a redundancy topology which require several connections to an ASA 5510. I am looking at extending the connections to my ASA 5510 appliance with the four port gig ethernet security module (4GE SSM). I am trying to find out what the limitations are on this particular module.
    I have heard that there might be limitations to the 4GE SSM. Such as the interfaces on this module might process data separately from the ASA 5510 appliance. My question is does the ASA four port gig ethernet security module (4GE SSM) interfaces act as a extension of the ASA 5510 appliance or does it process and filter data separate from the ASA 5510 appliance ?
    My concerns are that the 4GE SSM does not utilize all the security features of the ASA 5510 appliance, and that it just separates traffic into security zones. I interpret that to mean that each interface can be placed in a separate security level in which case has a separate security algorithm and uses the security level to force security policies. Nothing more.
    My second question if relevant would be what are the limitations?
    Thank you for your help on this topic.
    mike

    The 4GE SSM just gives you the four additional ports. It doesn't increase the processing capacity of the 5510 (a relatively low end box whose replacement - the 5515X -  has been out since this past spring). It works off the same configuration script and CPU as all the built-in ports.
    The only limitation I can think of off the top of my head is that members of an Etherchannel cannot span the SSM and the built-in ports.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    Which operating system?
    If I recall, some features were not fully supported on XP.
    Nancy O.

  • What are the limitations in terms of data size  or performance while using csv or text file as datasource?

    <p>Also what are the limitations in terms of data size  or performance related issues while using csv or text file?</p><p>Is it the best practice to use csv , text file to use as a datasource to improve performance?</p><p>Please Advice.... </p><p>&#160;</p>

    <p>Hi,</p><p>Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.</p><p>Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performance</p><p>Cheers</p><p>Rahul</p>

Maybe you are looking for

  • Is it possible to defne a function inside a component ?

    I'd want to can to define a function inside a simple component, for example a JtextArea I don't know how to do this. May I do it trought a propertychange event ?, but... I want to use my custom property.... (for example beginning = 15 ) ( another way

  • How can i restrict display or conceal data for a flexfield

    How can i restrict some property for a flexfied ? begin select responsibility_name into l_responsabilidade from fnd_responsibility_tl where responsibility_id = l_rep_id and language = userenv('LANG'); end; if l_responsabilidade in ('Operator') then  

  • Error when trying to install MS Exchange 2010 Management Tools Windows 7 x64 SP1

    When I try to install Exchange 2010 Management Tools on my Windows 7 Pro x64. I get the message ExSetupUI.exe has stopped working? Has anybody else gotten this message?  It doesn't even load into the install screen. It is stopping before then.

  • Add Infotype 0045(Loans) to Personal Profile

    Hi All, I am currently on EHP6 and i am trying to add Infotype 0045 to personal profile application but i am facing issues. I have followed the steps with few exceptions from the below link: Adding any Info Type IN ESS in EHP5/6 through WebDynpro Con

  • How do I completely uninstall

    After uninstalling IPod Itunes and trying to reinstaall, I get: System Error / Debug or Close How do I completely uninstall IPod + ITunes so I can do a clean install again????? Thanks, E L I