Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Similar Messages

  • Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

    I am migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
    Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

    I tried it without a problem. I changed the ip address of the WLC many times.
    You have to make sure though that:
    1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
    2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
    Here is the procedure how to change the ip of the interface (as per cisco doc):
    http://goo.gl/0BYqVT
    I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
    HTH
    Amjad

  • I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
    http://support.apple.com/kb/TS1398
    Regards.

  • Are there any issues with Maverick and Canon Pro10 printers

    Are there any issues with Canon Pro10 printers, Dymo 450 LaserWriter and Epson SX400 with the new Maverick?

    Try searching these forums and "Googleing" those devices on the web.....
    Barry

  • Are there any issues with itunes where as certain windows looks like a PC in safe mode?

    are there any issues with itunes where as certain windows looks like a PC in safe mode?

    Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

  • Are there any issues with MacPros+Dual Displays and FCP?

    I have a MacPro (2.1) with an ATI X1900XT graphics card (2 DVI ports). It is currently hooked up to a single 24". My usage is mostly Browsing, Final Cut Suite and Video. I am planning on upgrading to Dual Displays (2*24" or 2*27") but read about some vague issues the ATI might have when using dual displays and FCP (Color more specifically). Are there any specific issues I should be aware of before getting a second display?
    Many thanks in advance

    One graphics card? Two displays? ZERO ISSUES! Not sure what "vague issue the ATI" cards have, but I have that exact card, and run two 24" displays with no problems. I have run dual displays for years. I find working with one very...cramped.
    Shane

  • Are there any issues with Adobe Photoshop CS5 and OS X Yosemite 10.10?

    Are there any known issues with Adobe Photoshop CS5 and OS X Yosemite 10.10? I heard I would need an older Java version to start it.
    [ spammy links removed by admin ]

    You'll need to reinstall Photoshop CS5 after installing the MacOS 10.10 update -- for some reason the OS updater stomps on some of the Photoshop files.

  • Are there any issues when using AirPlay on an Apple TV that is using a shared internet connection?

    I am currently in a hotel and I have my MacBook Pro, iPad, and Apple TV (2nd gen). The hotel I'm in has both wired and wireless internet connections. I cannot directly connect my Apple TV to either connection because the hotel connections require you to agree to some terms and conditions that the Apple TV can't access. To further complicate things the ethernet connection in my room doesn't work at all. So the solution I found to at least connect the Apple TV to the internet was this: using my MacBook Pro, I connected to the hotel wireless connection (to bypass the hotel internet's T&C). I then shared that wireless connection via ethernet to the Apple TV. It works. I can watch YouTube and Netflix but I can't take advantage of AirPlay. I've updated, restored, and reset the Apple TV numerous times, but no luck. Are there any settings or connections I'm missing?

    Airplay from what?  iTunes or iPad?
    I assume iPad - in this setup the iPad and AppleTv will be unlikely to be able to see each other on the hotel network even if both are connected wirelessly.  If they can and you don't have a user/room  specific login I'd be concerned about other users seeing my devices too.   These things are generally designed for single user access not to create your own local network.  I suspect in the T&Cs for the wi-fi service it may preclude sharing the internet connection with another device, but if it works....

  • Are there compatibility issues with 1st gen I pad and new wireless printers?

    Need to replace HP printer being used with 1st Gen I Pad.  Are there any compatibility issues with new wireless printers?

    Hello jxroads,
    Welcome to the Apple Support Communities!
    I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices. 
    About AirPrint - Apple Support
    Cheers,
    Joe

  • Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

    Hi,
    are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
    Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
    Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
    Thanks!

    We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

  • Are there any issues with updating to IOS 5.0.1

    I have a  brand new IPad 2 and I see there is an OS update available. I see there are issues with some IPhones, but I'm wondering if there is any reason not to update the OS on my IPad?

    I haven't had any issues, although posts in this forum show some have. To upgrade to iOS5 you need to have your iPad connected to your computer. Once iOS5 is installed, further iOS updates can be installed via WiFi connection.
    You can download a complete iPad 2 User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
     Cheers, Tom

  • Are there any issues with Mavericks OS with Office for Mac

    Has anyone had any problems using Office for Mac software on the new Mavericks OS 10.9
    (Macbook Pro)?

    I have been having MAJOR problems with outlook office Mac 2011 and Mavericks (Macbook Pro Retina early 2013).
    The issue seems to be intermittent with POP and IMAP email accounts, and I suspect it may be related to the keyring and outlook mac 2011 interactions with the keyring.
    Intermittently my POP and IMAP accounts refuse to work, and I get asked to re-enter the password (and did I want to save it in the keyring) when I already did that.
    A suggestion over on the Microsoft Office Mac forum was to delete the account and re-enter it (credentials for the POP and IMAP) into Outlook.  Did that, and still having intermittent issues.
    This is causing be considerable GRIEF as I rely on these email accounts for time critical business issues, and failing to get emails is a disaster for us!
    Word, Excel and PowerPoint all appear to be behaving ok under Mavericks so far, but Outlook is proving to be quite difficult!!!
    Anyone else with these experiences???
    Apple Support are you watching???
    Thanks, IanB
    Australia

  • Are there any issues with starting a task sequence one day and finishing it up days later?

    Hello, 
    We have a few techs who, for whatever reason, will sometimes start a deployment task sequence (from boot media, USB) and then finish the task sequence the next day or days later.  For example, I had a recent one where the smsts log file had all of the
    PXE steps taking place on Friday, but then everything after the first reboot took place today, on Monday.
    The log was full of messages like below, and no software was installed:
    reply has no message header marker TSManager 3/3/2014 7:46:36 AM 1452 (0x05AC)
    Failed to send status message (80004005) TSManager 3/3/2014 7:46:36 AM 1452 (0x05AC)
    Error calling message lib Send(). Code 0x80004005 TSManager 3/3/2014 7:46:36 AM 1452 (0x05AC)
    Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 3/3/2014 7:46:36 AM 1452 (0x05AC)
    So obviously something is wrong, but I'd like to know a little detail as to why. Is there a timing issue when communicating with the MP?

    I need the complete smsts.log. Only part of them does not help.
    Anyway, the TS can run up to 24 hours if I have not remembered wrong. So, if you have too many steps in a TS and need to spend too much time to finish, this will cause the TS failed.
    Juke Chou
    TechNet Community Support

  • Any issues with using LDAP on LINUX for GRC 5.2 UME?

    Our company is converting our LDAP servers from AIX to LINUX.  The DNS name used in our UME connection should not change.  Are there any issues with using LDAP on LINUX?  We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
    Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it. 
    Do you have to reboot the server to test changing the LDAP connections?  I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button.  I've verified that this userid and password is correct for test LDAP.
    Is there a way to get more information about why the connection failed?
    Thanks.

    I've been told by our LDAP Support group that none of the other configuration settings should have to be changed.  I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
    Can you test a connection for a different userid/password without having to reboot/restart the server?  Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
    Thanks.

  • Are there any problems with un-compressing a drive?

    Bottman wrote:
    The only issue that I can think of is if the compressed files are then larger than the available space on the drive.
    If you're worried about this, you could uncompress a block of files at a time.
    The drive is currently 67% free.  I don't know what the compression ratio is but it probably wouldn't cause an issue with drive space.

    I have a very important 2TB logical disk (NTFS, Basic, not the system disk) attached to a Server 2008 R2 virtual machine.  Write performance has been very slow with large files and I realized that "Compress this drive to save disk space" is checked for the whole drive.  Are there any issues with disabling this feature?  It's easy enough to enable but I don't know what happens when I disable it.
    This topic first appeared in the Spiceworks Community

Maybe you are looking for